Constt. of Community Hall at Dhaggar under B2V3

Amount

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth for 1 meter from cutting edge and disposal of surplus excavated earth as directed:

ALL KINDS OF SOIL 75%

Ordinary Rock 25 %

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Random rubble stone masonary with hard stonein foundation and plinth and levelling up to cement concrete of 1:5:10 mixup to plinth level and curing complete

Extrea for R.R.Stone massonary for super structure.

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level, 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level

Centering and shuttering including strutting, propping etc. and removal of form work for:

Foundations, footings, bases for columns

Lintel, beams, plinth beams, girders, bressumers and cantilevers

Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gram/m2

Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.63 mm thick with zinc coating not less than 275 gram/m2

20 mm Cement sand plaster of mix I cement: 4 fine sand

Structural steel work in built up sections, trusses and framed work,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): SAL WOOD

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately).Second class deodar wood (30MM THICK SHUTTER)

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. 12 mm thick Marine plywood conforming to IS: 710

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc.

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second Class Deodar wood (30mm thick)

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge Second class deodar wood (30mm thick)

Providing and fixing panelling or paneeling and glazing in panelled and glazed shutter foe door windows and clerestory windows plane particle board flat pressed, 3 layers or graded wood particle board medium debsity grade 1 IS 3087marked 12mm thick

Providing and fixing 35mm thick wiire guage shutters of 2nd class Deodar wood using stainless steel grade 304 with wire gauge with wire of dia 0.5mm

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).

Providing & fixing wooden moulded beading to door and windows frames with iron screws 50x12mm 2nd class deodar wood

Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :

250 mm x 10mm

100mm x 10mm

Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete

300mm x 16mm

Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.

Providing and fixing aluminum hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : Twin rubber stopper

Rain water pipe 110mm dia

Bend 110mm dia

Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (Refer CPWD DSR E&M 2018 Item No. 1.10.1).

Group B

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required of approved make and manufacture. (Refer CPWD DSR E&M 2018 Item No. 1.14).

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

Wiring for light/ power plug with 2 x 4 sqmm FRLs PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit along with 1 no 4 sqmm FRLs PVC insulated copper conductor single core cable for loop earthing as reqd of approved make and manufacture.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required of approved make and manufacture. .

Suppling and fixing 5A to 32A rating, 240/415 V , 10 kA, "C" Curve , miniture circuit breaker suitable for inductive load of following poles in the existing MCB, DB complete with connection, testing and commissioning etc as reqd of approved make and manufacture.

SINGLE POLE

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required of approved make and manufacture. (Refer CPWD DSR E&M 2018 Item No. 1.24).

5/6 amp switch

3 pin 5/6 amp socket outlet

Supply and fixing following way single pole and neutral sheet steel MCB distribution board, 240V , on surface / recess complete with tinned copper bus bar neutral bus bar, earth bar interconnections power painted including earthing etc as reqd ( without MCB/RCCB/Isolators)

12 way, double door

Supply and fixing of LED Lamp 9 watt make (Havells/ anchor)

Supply of Exhaust fan wall/ ceiling fan 230V 50Hz ceiling fan with double ball bearing with low power consumption of following sweeps including fan regulators 1400mm ceiling fan

Supplying and Fixing of following rating 240/10KA"C" curve , minature circuit breaker suitable for inductive load of following poles in the existing MCB/ DB complete with connections , testing and commissioning as reqd Single pole and Neutral 63A

Supply and fixing following way single pole and neutral sheet steel MCB distribution board, 240V , on surface / recess complete with tinned copper bus bar neutral bus bar, earth bar interconnections power painted including earthing etc as reqd ( without MCB/RCCB/Isolators) of approved make and manufacture.

12 way, double door

Supplying and fixing suitable G.I. box with modular plate and cover in front on surface or in recess , including providing and fixingg 3 Pin 5/6 A modular socket outlet and 5/6A modular switch connection etc as reqd

Supplying and fixing suitable G.I. box with modular plate and cover in front on surface or in recess , including providing and fixingg 3 Pin 5/6 A modular socket outlet and 5/6A modular switch connection etc as reqd of approved make and manufacture.

Supplying and Fixing of following rating 240/10KA"C" curve , minature circuit breaker suitable for inductive load of following poles in the existing MCB/ DB complete with connections , testing and commissioning as reqd of approved make and manufacture.

Single pole and neutral 63A

Providing and fixing strips in joints of terrazzo/ cement concrete floors. Glass strips,40 mm wide and 4 mm thick

Providing and fixing CIB of approved size by way of making foundation in M10, Brickwork in 1:6 cement mortar including plastering with 1:4 cement mortar, painting and writings as per the direction of engineer in-charge including supply of materials, carriages all complete job.

CARRIAGE OF MATERIALS By Mechanical Transport and Manual mean including loading, unloading and stacking by an avg lead of:-

Sand and Bajri from an av lead of M.T=0km and A.T=5.0 km

Stone by HL=1.80km

add c/o sign board

JIA LAL

KARNAIL SINGH CONTRACTOR

GLOBAL ENGINEERS