Proposed Construction of Anganwadi Building near Ayyappanagara under Kukkundoor Panchayath limits, Karkala Taluk and Udupi District (MGNREGA Convergence Work).

Proposed Construction of Anganwadi Building near Ayyappanagara under Kukkundoor Panchayath limits, Karkala Taluk and Udupi District (MGNREGA Convergence Work).

Size stone 20 x 20 x 25 cms

Bond stone 20 x 20 x 45 cm

Portland Cement

Coarse sand (zone III)

Mixer (concrete small used in culvert)

Mason Class II (with tools)

Mason Class I (with tools)

Add watering charges at 1 % on Material

Broken stone aggregate 20 mm size

Broken stone aggregate 12 mm to 10 mm size

Mixer (concrete) - 1 cum Capacity

Plasticizer super Plasticizer

HOM of Vibrator 0.7 days

Formwork, - Fondation Sub Structrure of Cross drainages

Formwork, Centering & Scaffolding For Columns & Piers

Stone chister Class II

Casurina poles 100 - 150 mm

Add Handling , loading and unloading at 1% on Material

Form work ,centering & Scaffolding for Beeams & Lintels of Building

Form work ,centering & Scaffolding for Chejjas,Canopy & othres Architectural Projection of Minor section

TMT bars Fe 500

Formwork ,centering & Scaffolding for Roof Slab

Over Head Charges

Mason (brick layer) 2nd class

Fitter(grade-1)

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete...

Providing and fixing in position fully panelled Matti/Nandi wood shutters for doors with, stiles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per dr...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...

Providing and fixing in position fully glazed for windows shutters with Honne wood stiles and rails of 30mm. thick, 75mm wide in single shutters with 4mm thick plain glass fixed with wooden beading in...

Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long bracket...

Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...

Providing 6 mm cement plaster with cement mortar 1:3 (1 cement : 3

fine sand) on concrete surface / ceilings including rounding off corners wherever required smooth rendering, providing and removing s...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after th...

Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease, di...

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colou...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conformingto IS : 15622 of approved make in colours such as White, Ivo...

Providing and fixing water closet squatting pan (Indian type W.C. pan )with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually con...

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making go...

Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak p...

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931

Concealed Conduit System : Suupplying heavy guage PVC conduit pipe…………mm dia………………..thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste ...

Supplying heavy guage PVC Conduit Pipe...…dia……..mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and...

Point Wiring using Copper Wire with switch Supplying and wiring adopting loop system in existing PVC Conduit/casing capping uisng 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated,...

Point Wiring using Copper Wire with switch Supplying and wiring adopting loop system in existing PVC Conduit/casing capping uisng 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated,...

Point Wiring using Copper Wire with switch Supplying and wiring adopting loop system in existing PVC Conduit/casing capping uisng 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated,...

Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/N...

Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/N...

Supplying and fixing superior quality modular switch mounting polycorbonate plate with necessary supporting back plate with required no's of machine screwes, bolts, nuts etc., complete on the existi...

Supplying and fixing superior quality modular switch mounting polycorbonate plate with necessary supporting back plate with required no's of machine screwes, bolts, nuts etc., complete on the existi...

Supplying and fixing of modular switch/ Socket/ stepped electronic fan regulator/ dimme/ telephone socket etc on existing modular switch plate.Using Group " A" Materials 6 Amps Two way Switch

Supplying and fixing of modular switch/ Socket/ stepped electronic fan regulator/ dimmer/ telephone socket etc on existing modular switch plate.Using Group " A" Materials Stepped Fan Regulator

Supplying and fixing of modular switch/ Socket/ stepped electronic fan regulator/ dimme/ telephone socket etc on existing modular switch plate.Using Group " A" Materials TV/ Telephone socket

Wiring for lighting/Power circuit uisng one of FRLS PVC insulated 1100 V Grade, multistrand Copper conductor single core with low conducter resistance single core in open or cncealed system of wiring ...

Wiring for lighting/Power circuit uisng one of FRLS PVC insulated 1100 V Grade, multistrand Copper conductor single core with low conducter resistance single core in open or cncealed system of wiring ...

Supplying and fixing/Replacing of 6/16/32Amps electrical accessories on exisisting switch board. 32Amps Bakelite DP Group 'A'

Supplying and fixing of slim box fitting, made out of CRCA sheet metal body with locking type holder completely wired excluding Ballast & Flouresent Tube. 1x 4'-tube light fitting

Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling /rafters / girders using 23/0.0076” twin twisted PVC insulated wires...

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles, Single phase AC supply conforming ot ISS-374-1979 and with double bal...

Fixing all types and all capacities of 1'x4' / 2'x2' LED Light fittings indoor on the wall / ceiling / rafters / girders with necessary supporting frame, using 23/0.0076” twin twisted PVC insulated ...

Fixing a ceiling/ Wall mounting fan of all capacities and all types with necessary clamps and S hook made out of 15mm dia MS rod, with 5 amps ceiling rose of approved quality with necessary length of...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and "C" Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

Supplying and fixing regular MCB distribution boards on wall/wood board/flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 Ph...