NIT No. 1171/TC/EinC/PWD/25-26

OFFICE OF THE EXECUTIVEENGINEER E/M DIVISION PWD DURG (C.G.)

TERMS & CONDITION

NAME OF WORK :-Construction of Govt. Girls College Building I/c Water Supply & Sanitary Fittings, Septic Tank, sump well & Rain water Harvesting, Land Scaping & Electrification work at Khairagarh Distt.- Khairagarh Chhuikhadan- Gandai (C.G.)

1. Electric installation shall be carried out in accordance with the General Specification for Electrical Works (Part - I Internal) & (Part - II Exlernal) 1972 of C.P.W. D. adopted by E- In-C M.P.W.D. Bhapal & also : Confider With Indian Electrical Rule 1956 as amended. Up to Date.

2. Civil contractor should Subler the Electrical Work only those Electrical contractor who are Registered in PWD for Electrical Work as following class.

(I) "D" Class Electrical Contractor - Up to 1.00 Crore

(II) "C" Class Electrical Contractor - Up to 2.00 Crore

(III) "B" Class Electrical Contractor - Up to 10.00 Crore

(IV)"A" Class Electrical Contractor - Unlimited

3. Contractor will submit along with final bill.

(a) Completion Certificate

(b) Completion Plan drawn to a suitable seale on tracing cloth with ink. Indicating Location of main switch , D.B. Circuit fitting and their location

4. The Contractor will be fully responsibility for any accident damages and losses occurred due to negligence of work. The amount of the losses and damages etc. Will be recovered from the Contractor.

5. The Contractor shall have his own tools and plants, helmet, hand gloves, first aid box and other safety measures. In good working condition for staff No. Extra payment shall be made for this arrangement and no Claims shall be paid by the department.

6. The Contractor himself shall be fully responsibility for any accident casualty of the staff if occurs due to Electrical fault or any other reason during the work and no claim will be paid for such accident of causality by the department.

7. The Contractor will be fully responsibility for taking all of safety measures during contract period.

(a) Electrical power supply arrangement temporarily at site will be made by contractor No payment will the made by PWD Department

(b) Earthing system should be installed in presence of A. E. (e/m)/ Sub Engineer (E&M)

8. Earth Continuity conductor of required size & material should be installed with entire run of wiring Earth nut bolt must be provided at all switch boards All metallic parts Ceiling fan tube fitting socket out let should be essentially connected to earth.

9. All Connection of ceilling fan, tube fixture, street light fixture shall be made by Core PVC/ Rubber sheathed cable of required.

10. The Civil contractor should have a Electrical Supervisor for Electrical works at site as per Norms of C.G./ M.P. Govt. who Electrical Diploma/ Degree Holder as Required as per PAC Amount.

NAME OF WORK :- Construction of Govt. Girls College Building I/c Water Supply & Sanitary Fittings, Septic Tank, sump well & Rain water Harvesting, Land Scaping & Electrification work at Khairagarh Distt.- Khairagarh Chhuikhadan- Gandai (C.G.)

LIST OF APPROVE MATERIALS FOR E/F WORK

S. N. Name of Item Make

1 Flush type Switches/Sockets/Power Plugs 5A / Angle Holder/ Ceiling Roses 3 Plate. 1. M.K.(Elements) 2. Hevell's (Febio) 3. Legrand (Myrious) 4. Schneider (Livia) 5. Anchor (Roma)

2 PVC Wires (Fire Ratardant) 1.5 Sqmm. / 2.5 Sqmm / 4 Sqmm & 6 Sqmm. 1.KEI 2.Polycab 3. Anchor 4.Finolex 5.R R Cable

3 PVC Pipe & its accessories (a) 2 mm Thick for concealed wiring as well as for surface. 1.Plaza, 2.9GREENS 3.BEC plast 4. Polycab

4 MCCB,Pannel ,Main Switches / Change overs Switches 1.Schneider 2.L & T 3.Legrand 4.C& S

5 Power Cable HD 1.Polycab, 2.R R Cable, 3.KEI, 4.Finolex 5.Gloster

6 Ceiling fan 1200 mm / 1400 mm 1.Bajaj 2.Havell's 3.CROMPTON 4.Usha

7 Fresh air Fan/Exahust Fan 1.Bajaj 2.Crompton 3.Usha

8 LED light (luminaries) LED Bulb & LED Street light fitting LED tube light fitting/Tube Rod Bulb 1.Philips, 2.Wipro, 3.Crompton 4.Bajaj

9 Pump 1.SABAR, 2.CRI, 3.Texmo 4.Crompton

Note:- ALL MAKES ARE APPROVED BY S.E. (E/M) CIRCLE OFFICE RAIPUR

NIT For Construction of Govt. Girls College Building I/c Water Supply & Sanitary Fittings, Septic Tank, sump well & Rain water Harvesting, Land Scaping & Electrification work at Khairagarh Distt.- Khairagarh- Chhuikhadan- Gandai (C.G.)

PAC 456.55 Lacs

SERIAL No. Department SOR Year Item Code Description UOM Rate Quantity Amount

1 PWD PWD BLD 2015 1.1.1 Excavation for all types and sizes of foundations, trenches and drains or for any other purpose including disposal of excavated stuff upto 1.5 m lift and lead upto 50m (at least 5m away from the excavated area), including dressing and leveling of pits. 1.1.1) In all types of soils. cum 185.000 416.170 76991.000

2 PWD PWD BLD 2015 1.1.2 In Ordinary Rocks cum 267.000 1387.810 370545.000

3 PWD PWD BLD 2015 1.2 Surface dressing of the ground including removing vegetation and making up undulations and in-equalities not exceeding 15 cms in depth/ height including disposal of rubbish upto 1.5 m lift and lead upto 50m (at least 5m away from the dressed area). sqm 7.200 10200.000 73440.000

4 PWD PWD BLD 2015 1.6.1 Extra for every additional lift of 1.5 m or part thereof. All Types of soil cum 26.500 39.600 1049.000

5 PWD PWD BLD 2015 1.6.2 Ordinary or hard rocks cum 47.500 277.570 13185.000

6 PWD PWD BLD 2015 1.18 Providing and filling in plinth with sand/ Crusher dust and hard moorum under floor in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, including dressing etc. complete. cum 371.000 3446.150 1278522.000

7 PWD PWD BLD 2015 1.22 Supplying chlorpyrifos/ Lindane emulsifiable concentrate of 20% in sealed containers including delivery as specified. litre 208.00 559.960 116472.000

8 PWD PWD BLD 2015 1.25.1 Diluting chemical emulsion (chlorpyrifos/ lindane) in water as per manufacturers recommendation and injecting for pre-constructional curative cum preventive anti-termite. Surface treatment by spreading emulsion under floor, over the plinth area before laying base concrete @ 5 litres / sqm sqm 27.500 1965.620 54055.000

9 PWD PWD BLD 2015 1.25.2 Treatment of inside of plinth masonry wall on using diluted chemical emulsion @ 1.5 litre per hole, including drilling 12 mm diameter holes in plinth wall below plinth protection at the interval of 300 mm and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand). metre 19.00 1050.000 19950.000

10 PWD PWD BLD 2015 1.25.3 Treatment of outer side of plinth masonry wall using diluted chemical emulsion @ 1.5 litre per hole, including drilling 12 mm diameter holes in plinth wall at the junction of floor at the interval of 300 mm and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand). metre 13.50 1050.000 14175.000

11 PWD PWD BLD 2015 1.26.1 Carriage by mechanical transport upto 5 km lead: Earth cum 111.000 277.570 30810.000

12 PWD PWD BLD 2015 2.1.1 Form Work Providing and fixing form work including centering, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for: Foundations, footings, bases of columns plinth beam, curtain wall in any shape and size and all type of wall below plinth level. sqm 139.000 3046.200 423422.000

13 PWD PWD BLD 2015 2.1.3 Window sills, anchor blocks, string course, bends, copings, bed plates and like. sqm 184.00 41.850 7700.000

14 PWD PWD BLD 2015 2.1.5 Columns, Pillars, Piers and likes- rectangular or square in shape sqm 297.000 2835.500 842144.000

15 PWD PWD BLD 2015 2.1.7 Suspended floors, roofs, access platform, balconies (plain surfaces) and shelves (cast in situ) sqm 235.000 4275.600 1004766.000

16 PWD PWD BLD 2015 2.1.8 Beams, lintels, cantilevers & walls sqm 202.000 2326.690 469991.000

17 PWD PWD BLD 2015 2.1.13 Weather shade, chhajja, Cornices and mouldings sqm 294.00 132.680 39008.000

18 PWD PWD BLD 2015 2.1.15 Stair cases of all types excluding spiral and folded plate type, including risers and landings sqm 230.000 212.080 48778.000

19 PWD PWD BLD 2015 3.1.3 Cement Concrete (PCC/ RCC) Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work. 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size). cum 2970.000 300.790 893346.000

20 PWD PWD BLD 2015 3.1.5 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size). cum 4073.00 5.910 24071.000

21 PWD PWD BLD 2015 3.2.1 Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work.(Note :Excess/ less cement used as per design mix is payable/ recoverable separately) 3.2.1) 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size). cum 4163.000 1551.170 6457521.000

22 PWD PWD BLD 2015 3.4 Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: Ground Floor cum 97.500 501.580 48904.000

23 PWD PWD BLD 2015 3.4 First Floor cum 195.000 495.680 96658.000

24 PWD PWD BLD 2015 3.4 Second Floor cum 292.500 52.650 15400.000

25 PWD PWD BLD 2015 3.12.1 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire. all complete: Thermo-Mechanically treated bars FE 415 kg 54.500 215406.650 11739662.000

26 PWD PWD BLD 2015 3.13 Providing and laying damp proof course (upto 50mm thick) with plain cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20mm nominal size) including form work. cum 4237.000 5.260 22287.000

27 PWD PWD BLD 2015 3.15 Applying a coat of hot bitumen VG-10 using @ 1.7kg/ sqm on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. sqm 93.50 105.260 9842.000

28 PWD PWD BLD 2015 3.20 Providing and fixing aluminium strip 1.60 mm thick on expansion joints with iron screws as per design to match the colour, shade of wall treatment . sqm 1397.000 74.820 104524.000

29 PWD PWD BLD 2015 3.21.2 Providing and fixing in position impregnated fibre board confirming to IS: 1838 in expansion joints, including cost of primer, sealing compound all complete. 25mm thick sqm 768.000 74.820 57462.000

30 PWD PWD BLD 2015 7.5.3 Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 40 in foundation and plinth in: Cement Mortar 1:5 (1 cement : 5 coarse sand) cum 3350.000 730.870 2448415.000

31 PWD PWD BLD 2015 7.6 Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth: Ground Floor cum 121.000 318.590 38549.000

32 PWD PWD BLD 2015 7.6 First Floor cum 242.000 310.580 75160.000

33 PWD PWD BLD 2015 7.6 Second Floor cum 363.000 81.360 29534.000

34 PWD PWD BLD 2015 7.11.1 Cement Mortar 1:3 (1 cement : 3 coarse sand) Extra for half brick work in superstructure above plinth level for every story or part thereof in addition to rate for upto plinth level: Ground Floor sqm 394.000 151.990 59884.000

35 PWD PWD BLD 2015 7.12 Extra for half brick work in superstructure above plinth level for every story or part thereof in addition to rate for upto plinth level: Ground Floor sqm 11.000 90.760 998.000

36 PWD PWD BLD 2015 7.12 Extra for half brick work in superstructure above plinth level for every story or part thereof in addition to rate for upto plinth level: First Floor sqm 22.000 61.230 1347.000

37 PWD PWD BLD 2015 7.20 Extra for providing and placing in position hopping 25x1.60 mm or 2 Nos 6mm dia MS bars reinforcement at every third course of half brick masonry. sqm 62.500 151.990 9499.000

38 PWD PWD BLD 2015 8.12.2 Providing and fixing flush door shutters, conforming to IS : 2202 (Part-I), decorative type core of block board construction with frame of first class hard wood and well matched teak ply veneering with vertical grains or cross bands and face veneers on both faces of shutters excluding hinges. 35 mm. thick (single leaf) sqm 2005.000 160.320 321442.000

39 PWD PWD BLD 2015 8.15 Extra for double leaf shutter instead of single leaf. sqm 52.000 126.910 6599.000

40 PWD PWD BLD 2015 8.132.2 Providing and fixing stainless steel butt hinges IS : 12817 marked with necessary stainless steel screws etc complete. 125x2.5mm (heavy) each 76.50 380.000 29070.000

41 PWD PWD BLD 2015 8.137.1 Providing and fixing stainless steel sliding door bolts with 16mm rod, 2.5mm thick flap, necessary stainless steel nuts bolts and screws etc complete. 300mm each 238.000 54.000 12852.000

42 PWD PWD BLD 2015 8.138.1 Providing and fixing stainless steel door latch with 12mm rod, 2.5mm thick flap, necessary stainless steel screws etc complete. 300mm each 92.500 54.000 4995.000

44 PWD PWD BLD 2015 8.139.1 Providing and fixing stainless steel tower bolts (Barrel type) with necessary stainless steel screws etc complete. 250 x10mm each 97.00 124.000 12028.000

45 PWD PWD BLD 2015 8.139.2 Providing and fixing stainless steel tower bolts (Barrel type) with necessary stainless steel screws etc complete. 200 x10mm each 70.50 28.000 1974.000

46 PWD PWD BLD 2015 8.141.1 Providing and fixing Stainless steel "D" shape door handles made of 10mm dia rod with necessary stainless steel screws etc complete. 8.141.1) 200 mm each 64.000 124.000 7936.000

47 PWD PWD BLD 2015 8.143.2 Providing and fixing stainless steel hanging door stopper with necessary stainless steel screws complete. Double each 65.000 54.000 3510.000

48 PWD PWD BLD 2015 8.151 Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitred at corners and joined with 2 Nos of 150mm long brackets of 15x15mm M.S. square tube, the vertical door profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size complete as per manufacturers specification and direction of Engineer-in-Charge. metre 346.000 69.300 23978.000

49 PWD PWD BLD 2015 8.152.1 Providing and fixing 30mm thick factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for styles and 15x15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5mm thick heat moulded PVC 'C' channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45degree angle on either side forming styles; and 5mm thick, 95mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of the panel. 10mm (5mm x 2 ) thick, 20mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail. paneling of 5mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7mm (5mm+2mm) thick x 15mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per Manufacturer’s specification including 3 nos ISI marked stainless steel hinges of size 100x58x1.9 mm complete. (for W.C. and bathroom door shutter). PVC door shutter sqm 2318.000 22.050 51112.000

50 PWD PWD BLD 2015 9.11 Steel Work Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rails of T-iron 40x40x6mm with 38mm steel pulleys complete with bolts, nuts, locking arrangement stoppers, handles including applying a priming coat of red oxide zinc chromate primer. sqm 3330.000 11.520 38362.000

51 PWD PWD BLD 2015 9.15 Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer. kg 67.500 5279.100 356339.000

52 PWD PWD BLD 2015 9.18.4 Providing and fixing in position doors, windows and ventilators frames made of cold rolled pressed steel sheet framed profiles made from commercial M.S. Sheets conforming to I.S. 513 of 1973 and as per general specifications of I.S 4351 including hinges jamb, lock jamb, steel butt hinges, base tie, joints mitred and welded with 10cm long legs of size 15x3mm M.S. flat, embedded in cement concrete blocks 15x10x10cm size of grade M-10 or rawl plugs and screws or with fixing clips or with bolts and nuts including neatly compacted filling M-10 cement concrete in profile section applying a priming coat of red oxide zinc chromate primer. Single rebate/ mullion 100mmx50mm size, 1.6mm thick sheet. metre 474.00 437.600 207422.000

53 PWD PWD BLD 2015 9.47.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions made out of extruded aluminium standard sections (main section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285 mitred and jointed mechanically including aluminium cleats, neoprene weather stripping gasket beveled edge beading, screws duly fixed in wall/ floor with fixing clips or hold fasteners or bolts and nuts as required aluminium sections shall be anodized transparent or dyed to approved shade according to IS: 1868, minimum anodic coating shall be of grade AC-15. (Glazing to be paid for separately: For fixed portion kg 331.00 1030.320 341036.000

54 PWD PWD BLD 2015 9.47.2 For shutter of doors, windows & ventilators including providing and making provision for fixing of fitting wherever required including the cost of PVC/ neoprene gasket required (Fittings shall be paid for separately). Kg 338.00 1030.320 348248.000

55 PWD PWD BLD 2015 9.48 Extra for powder coated (minimum 50 micron) aluminium sections instead of anodized. kg 27.000 2060.640 55637.000

56 PWD PWD BLD 2015 9.51.2 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete. (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness sqm 708.000 257.580 182367.000

57 PWD PWD BLD 2015 9.57.1 Providing stainless steel railing/ grill made of S.S. flats, hollow S.S. pipe or square/ rectangular sections of approved design fixing in stair case, balcony or other places with metal fasteners and stainless steel bolts etc complete. SS Grade 204 kg 467.000 1165.860 544457.000

58 PWD PWD BLD 2015 10.61 Providing and fixing at all height false ceiling consisting of frame work "W" / "U" / "L" sections made of G.I. sheet with zinc coating of grade 120 consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick button wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64mm diax230mm long G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.55mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed including providing and fixing 12.5 mm thick tapered edge gypsum board conforming to IS: 2095- Part-I all complete as per drawing and specification and direction of the Engineer in Charge but excluding the cost of painting. sqm 658.000 31.200 20530.000

59 PWD PWD BLD 2015 11.1.1 Plastering and Pointing Work Providing and making 6mm thick cement plaster of mix: In Cement mortar 1:3 (1 cement : 3 fine sand) sqm 93.000 4528.970 421194.000

60 PWD PWD BLD 2015 11.2.4 In Cement Mortar 1:6 (1 cement : 6 fine sand) sqm 91.500 6280.570 574672.000

61 PWD PWD BLD 2015 11.3.3 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix: In Cement Mortar 1:5 (1 cement : 5 fine sand) sqm 113.000 113.360 12810.000

62 PWD PWD BLD 2015 11.3.4 In Cement Mortar 1:6 (1 cement : 6 fine sand) sqm 107.000 4043.410 432645.000

63 PWD PWD BLD 2015 11.5 Neat Cement punning. sqm 33.000 54.720 1806.000

64 PWD PWD BLD 2015 11.9 Extra for providing and mixing water proofing materials in cement plaster work in proportion as recommended by manufacturer. kg 43.50 1397.180 60777.000

65 PWD PWD BLD 2015 11.13 Extra for plastering done on mouldings, cornices or architraves including neat finish to line and level. sqm 134.00 258.720 34668.000

66 PWD PWD BLD 2015 11.41 Providing and fixing chicken mesh weighting not less than 250 gms/ sqm as per IS : specification in the required width with 40mm long steel nails on vertical and horizontal surface near R.C.C. and brick walls junctions including scaffolding and all lead and lifts etc. complete before plastering upto 10mts in height. sqm 86.000 1856.460 159656.000

67 PWD PWD BLD 2015 12.7.1 Providing and fixing ceramic glazed wall tiles conforming to IS : 15622 of approved make, colours, shades and size on wall and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with matching pigment complete. Size upto 200x300mm sqm 587.000 98.400 57761.000

68 PWD PWD BLD 2015 12.9.1 Providing and laying ceramic glazed floor tiles conforming to IS : 15622 of approved size, make, colour, shade laid on 20 mm thick Cement Mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement mixed with matching pigment etc., complete. Size 300x300mm sqm 692.000 20.520 14200.000

69 PWD PWD BLD 2015 12.17 Extra for fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477 (Type 2) for interior/exterior applications, using 5kg adhesive per sqm of tile area, in 3mm-6mm thickness in place of cement mortar. sqm 202.000 161.820 32688.000

70 PWD PWD BLD 2015 12.37.2 Chequerred precast cement concrete tiles 22mm thick in footpath &courtyard jointed with neat cement slurry mixed with pigment to match the shade of tile including cleaning of joint etc complete on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) : Medium shade using approximately. 50% white cement and 50% ordinary cement. sqm 591.000 73.600 43498.000

71 PWD PWD BLD 2015 12.44 Extra for nosing in Granite stone for treads. metre 126.000 486.400 61286.000

72 PWD PWD BLD 2015 12.46.2 15 mm thick Table rubbed polished Granite stone slab in risers and treads of steps skirting dado and pillars laid on 12mm (Average) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry including rubbing and polishing etc. complete (single stone is to be used for risers and treads of steps and width of stone for skirting and dado shall be equal to the height of skirting & dado and length of 1.0 m). Granite stone black sqm 2719.000 121.440 330195.000

73 PWD PWD BLD 2015 12.49 25 mm thick KOTA stone slab flooring over 20mm (Average) thick base of cement mortar 1:4 laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding rubbing and polishing etc. complete (Area of slab to be over 0.20 sqm and upto 0.50 sqm) sqm 897.00 1022.600 917272.000

74 PWD PWD BLD 2015 12.74.1 Providing and fixing rectified glazed ceramic floor tiles of 1st quality conforming to IS:15622-2017 of approved make, in all colours, shades overs 20mm thick bed of cement Mortar 1:3 (1 cement:3 coarse sand) and jointing with grey cement slurry @ 3.3Kg per sqm including pointing in white cement mixed with matching pigment complete. Size 300x300mm thickness 7 to 8 mm sqm 779.00 99.140 77230.000

75 PWD PWD BLD 2015 12.75.2 Providing and fixing rectified glazed ceramicWall/Dado tiles of 1st quality conforming to IS:15622-2017 of approved make, in all colours, shades overs 12mm thick bed of cement Mortar 1:3 (1 cement:3 coarse sand) and jointing with grey cement slurry @ 3.3Kg per sqm including pointing in white cement mixed with matching pigment complete. Size 300x600mm thickness 7 to 8 mm sqm 850.00 256.05 217643.000

76 PWD PWD BLD 2015 12.78.1 Providing and laying Matt/glezed finish HOMOGENEOUS ACROSS FULL BODY VITRIFIED floor tiles (heavy duty) with water absortion less than 0.05% and conforming to IS:15622-2017 of 1st quality of approved make in all colours, shades and size mentioned below (+/- 10mm) laid on 20mm thick cement mortal 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. Size 600x600mm thickness 9 to 10 mm sqm 1331.00 2744.700 3653196.000

77 PWD PWD BLD 2015 13.6.2 Marble Work (Wall Lining) 15mm thick Granite work (machine cut, table rubbed & mirror polished) for kitchen platform, vanity counters, window sills and similar locations of required size laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) including joints treated with white cement mixed with matching pigment including rubbing and polishing to edge moulding to give high gloss finish. Granite stone black sqm 3279.000 247.100 810241.000

78 PWD PWD BLD 2015 13.19.2 Extra for providing edge moulding to 15mm thick stone counters, vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work metre 172.000 847.600 145787.000

79 PWD PWD BLD 2015 14.56 Providing and applying 2mm thick white cement based polymeric Exterior grade putty with minimum 3 coats applied @ 5.4 kg/10 Sqm as per relevant IS code 17545: 2021 ( Product such as Birla wall care, Asian trucare, JK wall putty, Berger Bison Wall putty ) to make the surface smooth and even with all tools tackles and labour etc. complete for the work. sqm 86.000 10809.540 929620.000

80 PWD PWD BLD 2015 14.64 Providing and applying PREMIUM Plastic Emulsion paint with roller application minimum 3 coats applied @ 0.75 lit/ 10 sqm up to final finish as per relevant I.S. Code 15489:2013 Type-1 class D, C (Glossy and Semi Glossy Finish) of required shade (Product such as Asian Apcolite Premium , Dulux Super Cover, Berger Easy Clean , Nippon Breeze Metex Gold, Opus I-50/ Calista) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour etc complete for the work. ( With 3 year Warranty.) sqm 84.000 10809.540 908001.000

81 PWD PWD BLD 2015 14.68 Providing and applying on exterior surface with PREMIUM Exterior Emulsion paint of required shade to give protective and water proof finish minimum 3 coats applied @ 1.40 lit/ 10 sqm up to final finish as per relevant I.S. Code 15489:2013 Type-2 class D, C (Glossy/ Semi (Product such as Asian Apex, Dulux Weather Shield Prima E900, Berger Weathercoat Antidust, Nerolac Everlas Excel, Nippon Everlas Excel, Nippon Sumo Etra, Opus True Flex) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackles and labour etc complete for the work. ( With 3 year Warranty.) sqm 84.000 4043.410 339646.000

82 PWD PWD BLD 2015 14.71 Providing and applying satin/matt finish Enamel paint minimum 2 coats in all surface applying @0.75 lit/10 Sqm up to required finish as per relevant I.S. code 2932:2013 of (Product such as Asian satin Enamel, Dulux Promise premium Enamel, Nerolac Synthetic Enamel, Opus Prime enamel ) inclusive of providing abro tape on edges and article and cleaning of door, windows, floor and surface as required with all tools tackle and labour etc. complete for the work. sqm 133.000 689.130 91654.000

83 PWD PWD BLD 2015 14.99 Providing and applying French Sprit Polish on existing polished wood work including removing the polish and preparing the surface by rubbing down smooth the sand papers, covering the knots, if visible, applying a coat of wood filter, cleaning the surface, applying various (minimum 2 coats) of french spirit polish till the surface gives high gloss inclusive of providing abro tape on edges and article and cleaning of adjucent surface with all tools, tackles and labour etc. complete for the work. sqm 307.000 400.790 123043.000

84 PWD PWD BLD 2015 18.1.1 SANITARY INSTALLATIONS Providing and fixing water closet squatting pan (Indian type W.C. pan ), 100mm sand cast Iron P or S trap, 10 litre low level P.V.C. flushing cistern (same colour) conforming to IS : 7231, with flush bend and other fittings and fixtures complete including cutting and making good the walls and floors wherever required White Long pattern W.C. pan of size 580 mm each 2459.000 8.000 19672.000

85 PWD PWD BLD 2015 18.4.1 Providing and fixing vitreous china water closet (European type W.C. pan) with white ISI marked plastic seat and lid, 10 litre low level white P.V.C. flushing cistern (same colour), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : White pedestal type each 2882.000 4.000 11528.000

86 PWD PWD BLD 2015 18.9.1 Providing and fixing ISI marked plastic seat with lid for pedestal type W.C. pan complete: White/ black each 620.000 4.000 2480.000

87 PWD PWD BLD 2015 18.10.2 Providing and fixing 15 mm nominal bore uplasticised PVC connection pipe with PTMT nuts and PVC bush of approved quality and colour: 45 CM length each 66.500 102.000 6783.000

88 PWD PWD BLD 2015 18.15 Providing and fixing one piece construction white vitreous china squatting plate urinal with an integral rim longitudinal flushing pipe, standard size G.I. flush pipe for back and front flush, C.P. brass coupling complete including cutting and making good the walls and floors etc. wherever required : each 2014.00 8.000 16112.000

89 PWD PWD BLD 2015 18.17.1 Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required : White Size 550x450 mm each 1430.000 12.000 17160.000

90 PWD PWD BLD 2015 18.21.2 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink with drain board as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required : 1040x510 mm bowl size 460x410x200mm each 8539.000 6.000 51234.000

91 PWD PWD BLD 2015 18.25.2 Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40 mm dia each 88.500 6.000 531.000

92 PWD PWD BLD 2015 18.29 Providing and fixing 600x450 mm beveled edge 4mm mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. each 599.000 12.000 7188.000

93 PWD PWD BLD 2015 18.76.1 Providing and fixing on wall face or under floor UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including required couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion etc complete. 75 mm dia pipe. metre 182.000 418.000 76076.000

95 PWD PWD BLD 2015 18.77.1.1 Providing and fixing on wall face UV stabilized Unplasticised - PVC moulded fittings/ accessories having 3.2mm wall thickness for Rigid PVC pipes conforming to IS : 13592 (heavy) jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 75 mm each 113.000 160.000 18080.000

97 PWD PWD BLD 2015 18.77.2.2 Double Y with or without door 110 mm each 224.000 20.000 4480.000

98 PWD PWD BLD 2015 18.77.3.2 Vent covel 110mm each 44.000 12.000 528.000

99 PWD PWD BLD 2015 18.77.5 P trap 110mmx110mm long each 227.000 9.000 2043.000

100 PWD PWD BLD 2015 18.77.6 Nahani trap 110x75mm each 90.500 80.000 7240.000

101 PWD PWD BLD 2015 18.78.2 Providing and fixing UV stabilized Unplasticised -PVC pipe clips of approved design to Rigid PVC pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm each 61.000 120.000 7320.000

102 PWD PWD BLD 2015 19.7.1 Providing and fixing on wall surface G.I. pipes medium class complete with G.I. fittings and clamps, including cutting, making good the walls etc. and testing of joints complete: 15 mm dia. nominal bore metre 149.000 200.000 29800.000

103 PWD PWD BLD 2015 19.7.3 25 mm dia. nominal bore metre 258.000 470.000 121260.000

104 PWD PWD BLD 2015 19.7.4 32 mm dia. nominal bore metre 318.000 180.000 57240.000

105 PWD PWD BLD 2015 19.7.6 Providing and fixing on wall surface G.I. pipes medium class complete with G.I. fittings and clamps, including cutting, making good the walls etc. and testing of joints complete: 50 mm dia. nominal bore metre 471.000 150.000 70650.000

106 PWD PWD BLD 2015 19.14.1 Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required: Bib cock (400 grams) each 382.000 62.000 23684.000

107 PWD PWD BLD 2015 19.14.3 Long body bib cock (500 grams) each 426.000 2.000 852.000

108 PWD PWD BLD 2015 19.14.5 Two way bib cock (800 grams) each 708.00 2.000 1416.000

109 PWD PWD BLD 2015 19.14.6 Stop cock (concealed) (600 grams) each 494.000 62.000 30628.000

110 PWD PWD BLD 2015 19.14.7 Angle valve for basin mixer and geyser points (450 grams) each 382.000 1.000 382.000

111 PWD PWD BLD 2015 19.14.14 Soap dish plate each 163.000 12.000 1956.000

112 PWD PWD BLD 2015 19.14.15 Shower rose (revolving type) (150mm) each 269.000 4.000 1076.000

113 PWD PWD BLD 2015 19.14.16 Towel rail (600mm long x 20mm dia) each 338.00 20.000 6760.000

114 PWD PWD BLD 2015 19.14.20 CP brass water jet to be fixed in seat cover of WC with flexible connection pipe set 577.00 4.000 2308.000

115 PWD PWD BLD 2015 19.15 Providing and fixing stainless steel drain jali of approved make/quality. each 51.000 80.000 4080.000

116 PWD PWD BLD 2015 19.18.1 Providing and fixing gun metal non- return valve (horizontal type) of approved quality (screwed end) : 25 mm nominal bore each 413.000 12.000 4956.000

117 PWD PWD BLD 2015 19.18.2 32 mm nominal bore each 556.000 6.000 3336.000

118 PWD PWD BLD 2015 19.18.4 50 mm nominal bore each 993.000 7.000 6951.000

119 PWD PWD BLD 2015 19.42 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank . litre 7.300 14000.000 102200.000

120 PWD PWD BLD 2015 19.47 Constructing masonry Chamber 30x30x50 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 ( 1 cement : 5 fine sand:10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design : each 754.00 10.000 7540.000

121 PWD PWD BLD 2015 19.48 Constructing masonry Chamber 60x60x75 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : each 4644.00 6.000 27864.000

122 PWD PWD BLD 2015 20.1.2 DRAINAGE Providing, laying and jointing glazed stoneware pipes grade A with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints 150 mm diameter metre 262.000 80.000 20960.000

123 PWD PWD BLD 2015 20.1.3 200 mm diameter metre 506.000 50.000 25300.000

124 PWD PWD BLD 2015 20.2.2 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete 150mm thick as per standard design: 150 mm diameter S.W. pipe metre 436.000 80.000 34880.000

125 PWD PWD BLD 2015 20.2.3 200 mm diameter S.W. pipe metre 508.000 45.000 22860.000

126 PWD PWD BLD 2015 20.3.1 Providing and fixing square-mouth S.W. gully trap grade 'A'’ complete with C.I. grating brick masonry chamber with well burnt modular clay bricks crushing strength not less than 35kg/cm2, water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : 100x100 mm size P type each 1339.00 10.000 13390.000

127 PWD PWD BLD 2015 20.5.2 Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 150 mm dia. R.C.C. pipe metre 353.00 100.000 35300.000

128 PWD PWD BLD 2015 20.7.1 Constructing brick masonry manhole with well burnt modular clay bricks crushing strength not less than 35kg/cm2 in cement mortar 1:4 ( 1 cement : 4 coarse sand), R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation in cement concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : each 6703.00 16.000 107248.000

129 PWD PWD BLD 2015 20.31 Providing and constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design. each 1709.000 4.000 6836.000

130 PWD PWD BLD 2015 21.1.1.3 RAIN WATER HARVESTING & TUBEWELLS Boring/drilling bore well perfectly vertical for the specified depth suitable to receive required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer–in-charge upto 90 metre depth below ground level. All types of soil 150 mm dia. metre 339.000 60.000 20340.000

131 PWD PWD BLD 2015 21.1.2.3 Rocky strata including Boulders. 150 mm dia. metre 396.000 120.000 47520.000

132 PWD PWD BLD 2015 21.2.2.3 Boring/drilling bore well perfectly vertical for the specified depth suitable to receive required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer–in-charge beyond 90 metre & upto 150 metre depth below ground level. Rocky strata including Boulders. 150 mm dia. metre 424.000 56.000 23744.000

133 PWD PWD BLD 2015 21.6.3 Supplying, assembling, lowering and fixing in vertical position in bore well,slotted casing pipe made from ISI marked G.I. pipe (Plain) medium class in 4 to 7 meters length one end fitted with socket as per IS: 1239 (Part- 1&Part-2) 1992 with IVth revision (having slot of size 1.6/3.2 mm), of reputed and approved make, including hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer-incharge. 150 mm nominal dia metre 1317.000 80.000 105360.000

134 PWD PWD BLD 2015 21.9 Gravel packing in tube well construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge. cum 1048.000 2.400 2515.000

135 PWD PWD BLD 2015 21.11.3 Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for bore well of: 150 mm dia each 217.000 2.000 434.000

136 PWD PWD BLD 2015 21.17 Carrying out the resistivity survey by VES method using Schlumberger configuration for locating the proper spot for drilling of tube well within the selected habitation, including photography, interpretation of resistivity data and submission of report in the desired format along with resistivity readings, necessary graph and photographs. (only successful point is payable) point 1502.000 2.000 3004.000

137 PWD PWD BLD 2015 21.18 Providing and fixing filter of minimum 100 litre capacity for roof top rain water harvesting through tube well consisting of two layered HDPE tank with five layers (each layers of minimum 100 mm) consist of coarse sand, 4mm, 6mm, 8mm & 12 mm gravels with stainless steel wire mesh fixed between each layer with suitable length and sufficient numbers of 110 mm dia PVC pipe pieces in the bottom of tank to support the above layer including fixing of inlet and out let P.V.C. pipe of required diameter upto 2 metre length on each side, Cement Concrete plateform of required size complete as directed by Engineer in charge. (excluding cost of tubewell and inlet and outlet pipe beyond 2 metre) litre 18.50 6000.000 111000.000

138 PWD PWD BLD 2015 21.19 Providing and fixing 80-100 mm dia PVC ball valve for inlet/ outlet of rain water harvesting pipe and filter. each 644.000 6.000 3864.000

139 PWD PWD BLD 2015 22.25.1 Providing and planting following herbs in garden including preparation of soil, base plantation, providing and spreading different fertilizers, soil and sand: Hedges like Alife, Dorenta, Tikoma etc each 14.000 1000.000 14000.000

140 PWD PWD BLD 2015 22.25.2 Furn like Arica, China etc (3 year old) each 125.000 400.000 50000.000

141 PWD PWD BLD 2015 22.25.3 Hibiscus (Flower)/ Rose each 26.500 400.000 10600.000

142 PWD ELECT 2020 1.7 Wiring for light/ fan/ exhaust fan / call bell point with 3x1.5 sqmm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) with 5/6 amp modular switch, modular base and cover plate, suitable size G.I. box as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5)1.7.1 )Short Point Point 266.00 81 21546.00

143 PWD ELECT 2020 1.7.2 Medium Point Point 424.00 255 108120.00

144 PWD ELECT 2020 1.7.3 Long Point Point 588.00 520 305760.00

145 PWD ELECT 2020 1.8 Wiring for twin control light point with 3x1.5 sqmm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) with 5/6 amp modular switch, modular base and cover plate, suitable size G.I. box as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) Point 420.00 8 3360.00

146 PWD ELECT 2020 1.9 Extra for providing and fixing light plug point on board in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) point wiring with modular type 3 pin 5/6 amp socket outlet and 5/6 amp switch including cost of base and cover plate and G. I. box etc. as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) Point 216.00 103 22248.00

147 PWD ELECT 2020 1.10 Wiring for light plug point with 3x2.5 sq mm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) along with modular type 6 Amp switch and 3 pin 6 amps socket outlet with modular base and cover plate, suitable size G.I. box, earthing the switch box and socket outlet with same size wire etc. as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5)1.10.2 ) Medium Point Point 659.00 15 9885.00

148 PWD ELECT 2020 1.10.3 Long Point Point 922.00 20 18440.00

149 PWD ELECT 2020 1.10.4 Extra Long Point I Point 1302.00 22 28644.00

150 PWD ELECT 2020 1.10.5 Extra Long Point II Point 1657.00 30 49710.00

151 PWD ELECT 2020 1.10.6 Extra Long Point III Point 1995.00 25 49875.00

152 PWD ELECT 2020 1.11 Wiring for power plug point with 3x4 sq mm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) along with modular type 16 Amp switch and 6 pin 16 amps socket outlet with modular base and cover plate, suitable size G.I. box, earthing the switch box and socket outlet with same size wire etc. as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) 1.11.2 ) Medium Point Point 942.00 8 7536.00

153 PWD ELECT 2020 1.11.3 Long Point Point 1350.00 10 13500.00

154 PWD ELECT 2020 1.11.4 Extra Long Point I Point 1807.00 12 21684.00

155 PWD ELECT 2020 1.11.5 Extra Long Point II Point 2315.00 16 37040.00

156 PWD ELECT 2020 1.11.6 Extra Long Point III Point 2825.00 20 56500.00

157 PWD ELECT 2020 1.12 Wiring for power plug point with 3x6 sq mm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) along with modular type 32 Amp SPMCB "C" curve and 6 pin 20 amps socket outlet with modular base and cover plate, suitable size G.I. box, earthing the switch box and socket outlet with same size wire etc. as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) 1.12.3 ) Long Point Point 1705.00 4 6820.00

158 PWD ELECT 2020 1.12.4 Extra Long Point I Point 2326.00 6 13956.00

159 PWD ELECT 2020 1.12.5 Extra Long Point II Point 3016.00 10 30160.00

160 PWD ELECT 2020 1.12.6 Extra Long Point III Point 3708.00 10 37080.00

161 PWD ELECT 2020 1.13 Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, wire in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) 1.13.1 ) 3 X 1.5 sq. mm in 20mm conduit Metre 92.00 445 40940.00

162 PWD ELECT 2020 1.13.2 3 X 2.5 sq. mm in 20mm conduit Metre 111.00 998 110778.00

163 PWD ELECT 2020 1.13.3 6 X 2.5 sq. mm in 25mm conduit Metre 172.00 316 54352.00

164 PWD ELECT 2020 1.13.4 9 X 2.5 sq. mm in 32mm conduit Metre 238.00 275 65450.00

165 PWD ELECT 2020 1.13.5 12 X 2.5 sq. mm in 32mm conduit Metre 288.00 166 47808.00

166 PWD ELECT 2020 1.13.6 3 X 4 sq. mm in 25mm conduit Metre 145.00 936 135720.00

167 PWD ELECT 2020 1.13.13 6 X 6 sq. mm in 32mm conduit Metre 312.00 90 28080.00

168 PWD ELECT 2020 1.13.14 6 X 10 sq. mm in 40mm conduit Metre 515.00 140 72100.00

169 PWD ELECT 2020 1.13.15 6 X 16 sq. mm in 50mm conduit Metre 772.00 45 34740.00

170 PWD ELECT 2020 1.15 Supplying and fixing of following sizes FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) along with accessories in concealed complete as per specification and IS: 9537 (2000 Part 5) 1.15.1 ) 20 mm Metre 42.00 250 10500.00

172 PWD ELECT 2020 3.11 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, multi strand wire in the existing surface/ concealed, FRLS PVC conduit / PVC casing caping as per specification and IS: 694 (2010)3.11.13 )3 x 2.5 sq. mm Metre 57.00 130 7410.00

173 PWD ELECT 2020 3.12 Supplying and drawing following pair 0.5 mm FR PVC insulated copper conductor, unarmored telephone wire in the existing surface/ concealed Steel/FRLS PVC conduit as per specification 3.12.2 )2 Pair Metre 11.00 150 1650.00

174 PWD ELECT 2020 3.14 Supplying and drawing UTP 4 pair Cat 6 LAN wire in existing surface/ concealed Steel/FRLS PVC conduit as per specification metre 19.00 350 6650.00

175 PWD ELECT 2020 3.15 Supplying and drawing following pair 0.5 mm FR PVC insulated stranded copper conductor armoured telephone wire in the existing surface/ concealed Steel/FRLS PVC conduit as per specification 3.15.1 )10 Pair Metre 67.00 70 4690.00

176 PWD ELECT 2020 5.4 Supplying and fixing following modular switch, socket, other accessories on the existing modular plate & switch box including connections but excluding modular plate etc. as per specification.5.4.9 )Fan regulator (two module size) electronic stepped type moving all rounds Each 223.00 176 39248.00

177 PWD ELECT 2020 5.4.11 Plug Top (Deluxe type) 3 pin 16 Amps (For power plug). Each 85.00 30 2550.00

178 PWD ELECT 2020 5.4.13 RJ-45 {CAT6} socket outlet Each 263.00 4 1052.00

179 PWD ELECT 2020 5.4.14 RJ-45 {CAT6} LAN, I/O Box Each 199.00 9 1791.00

180 PWD ELECT 2020 5.4.15 Telephone socket outlet Each 70.00 10 700.00

181 PWD ELECT 2020 5.4.16 T.V. antenna socket outlet Each 74.00 1 74.00

182 PWD ELECT 2020 5.4.19 SP MCB 25 amp Each 250.00 30 7500.00

183 PWD ELECT 2020 5.4.20 Ceiling rose 3 pin 5 amp Each 40.00 585 23400.00

184 PWD ELECT 2020 5.4.22 Batten/ angle holder Each 41.00 70 2870.00

185 PWD ELECT 2020 5.4.23 Blanking plate Each 28.00 350 9800.00

186 PWD ELECT 2020 5.6 Providing and fixing composite unit for computer points having modular type 1 No 6 pin 16 amp socket outlet, 1 No 16 amp switch, 3 Nos 3 pin 6 amp socket outlets, 3 Nos 6 amp switches, suitable G.I. box, base and cover plates, earthing the sockets and switch box including etc. as per specification. Each 816.00 78 63648.00

187 PWD ELECT 2020 5.7 Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts A.C. supply, complete as per specification.5.7.2 ) Deluxe Each 107.00 4 428.00

188 PWD ELECT 2020 5.10 Providing and fixing fan hook made of 12mm dia steel bar in existing ceiling slab including cutting of roof, fixing hook above reinforcement on both side, repairing with cement mortar 1:2 (1 cement : 2 sand) etc. as per specification. Each 109.00 210 22890.00

189 PWD ELECT 2020 6.1 Supplying, installation, testing and commissioning of following sizes ceiling fan including wiring the down rods of standard length up to 30 cm with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, earthing etc. complete as required. P.F. should be greater than 0.9, with BEE Star rating from 3 star and above, IS: 374:2019 including all amendments. 6.1.3 ) 1200 mm sweep Each 1697.00 176 298672.00

190 PWD ELECT 2020 6.5 Supplying and fixing of wall/ cabin fan including connection etc. as per specification. P.F. should be greater than 0.9 6.5.2 ) 400 mm sweep Each 2043.00 4 8172.00

191 PWD ELECT 2020 6.6 Supplying, installation, testing and commissioning of following sizes heavy duty (continuous running) 1400 rpm exhaust fan in existing opening in wall including earthing etc. complete as per specification. P.F. should be greater than 0.9 6.6.2 ) 380 mm sweep Each 2858.00 22 62876.00

192 PWD ELECT 2020 6.8 Supplying, installation, testing and commissioning of following sizes fancy exhaust fan having built in louvers in existing opening in wall including earthing etc. complete as per specification. P.F. should be greater than 0.9 6.8.2 ) 300 mm sweep Each 1270.00 2 2540.00

193 PWD ELECT 2020 6.11 Supplying and fixing following sizes of down rod of 15/20mm dia M.S. pipe of thickness 2 mm to ceiling fan including painting with matching colour etc. as per specification. 6.11.2 ) 60 cm long Each 40.00 210 8400.00

194 PWD ELECT 2020 6.15 Supplying, installation, testing and commissioning of following LED fitting (luminaries) Panel Light in round/ square shape complete with electronic driver heat sink capacitor and all other accessories on surface/ in false ceiling etc. as per specification and P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 100 lumens /watt. 6.15.6 )18/20 Watt Each 868.00 201 174468.00

196 PWD ELECT 2020 6.16 Supplying, installation, testing and commissioning of following sleek LED panel down lighters (luminaries) in round/ square shape complete with electronic driver heat sink capacitor and all other accessories on surface/ in false ceiling etc. as per specification and P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 100 lumens /watt.6.16.1) 24 watt, size 300 x 300mm Each 1775.00 36 63900.00

197 PWD ELECT 2020 6.17 Supplying, fixing, testing and commissioning of following LED lamps with inbuilt electronic driver heat sink and all other accessories in existing holder/ luminaries as per specification and P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 100 lumens /watt. 6.17.4 ) 9 Watt Each 143.00 70 10010.00

198 PWD ELECT 2020 6.18 Supplying, installation, testing and commissioning of following COB LED Spot Light fitting complete with Electronic Driver Heat sink Capacitor and all other accessories including connection, earthing etc complete as per specification and IP20, P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 100 lumens /watt. 6.18.2 )9 watt Each 1148.00 16 18368.00

199 PWD ELECT 2020 6.19 Supplying, installation, testing and commissioning of following LED tube light fitting including batten with Electronic Driver Heat sink Capacitor complete with all other accessories on surface/ in false ceiling, including connection, earthing etc complete as per specification and IP20, P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 100 lumens /watt. 6.19.3 )18/20 watt {4 feet} Each 443.00 251 111193.00

200 PWD ELECT 2020 6.28 Supplying, installation, testing and commissioning of following 230/250 volts LED street light fitting with all accessories like driver, heat sink made of die cast aluminium with IP 66 protection and 15 KV surge protection on pole bracket, including connection, earthing, Separate housing for driver etc complete as per specification and P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 120 lumens /watt.6.28.6 )45 watt Each 2729.00 8 21832.00

203 PWD ELECT 2020 6.48 Numbering of ceiling fan/ exhaust fan/ fluorescent fittings as per specification. Each 10.00 176 1760.00

204 PWD ELECT 2020 6.50 Providing and fixing wooden board of suitable size (18''x 24'') for energy meter etc complete as per specification. Each 123.00 1 123.00

205 PWD ELECT 2020 7.2 Supplying and fixing wall mounted metal board of welded construction, fabricated with minimum 35 mm X 35 mm X 6 mm angle iron frame work, with 25 mm X 6 mm flat iron as intermediate members including painting etc. as per specification. sqm 2861.00 3.4 9727.40

206 PWD ELECT 2020 7.6 Supplying and fixing metal clad busbar chamber made of 2.0 mm thick CRCA MS powder coated sheet with 4 strip aluminium alloy or wrought aluminium busbars of following capacity and length, complete with all accessories, including earthing the body etc. as per specification.7.6.2 )100 amps x 450mm long Each 1911.00 2 3822.00

207 PWD ELECT 2020 7.16 Providing and making interconnection in cubical panel between BBC and switchgears with following size aluminium strip of length upto 50cm as per specification (To be measured separately for each phase/ neutral).7.16.1 )20x5mm (100 amps) Each 78.00 16 1248.00

210 PWD ELECT 2020 7.19 Fabrication, supply, installation, testing and commissioning of cubicle type compartmentalized wall/ floor mounted power cum control panel board of specified size and following depth made out of not less than 2 mm thick CRCA MS powder coated sheet with suitable size compartments for bus bars, switchgears and necessary cutouts for voltmeters, ammeters etc as per specifications including powder coating painting but without busbars, switchgears and other accessories etc complete as per specification.7.19.2 )Above 300 mm and upto 450 mm deep sqm 7525.00 4.25 31981.25

211 PWD ELECT 2020 7.20 Supply, installation, testing and commissioning of 4 pole (3 phase + neutral) aluminium bus bars in existing cubicle type compartmentalized wall/ floor mounted panel board along with suitable size and shape insulators, necessary bolts and nuts etc complete as per specification.7.20.2 )200 amp (30x5mm) Metre 907.00 6 5442.00

213 PWD ELECT 2020 9.1 Providing and fixing following rating and breaking capacity MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as per specification, IS/ IEC: 60947-2 and Ics = 100 % Icu.9.1.1 )3 pole MCCB, 25-63A, Fixed Thermal Release, 10KA Each 1483.00 3 4449.00

214 PWD ELECT 2020 9.1.24 4 pole MCCB, 100A, Adjustable Thermal - Magnetic Release, 35KA Each 6378.00 13 82914.00

215 PWD ELECT 2020 9.1.27 4 pole MCCB, 200A, Adjustable Thermal - Magnetic Release, 35KA Each 13051.00 2 26102.00

216 PWD ELECT 2020 9.1.36 4 pole MCCB, 400A, Adjustable Thermal - Magnetic Release, 50KA Each 20356.00 1 20356.00

217 PWD ELECT 2020 10.7 Providing and fixing metal clad, 4 pole, on load change over switch unit (with sheet steel enclosure), 415/500 volts, in cubicle panel including drilling holes on the board, connections, earthing the body, testing and commissioning etc. as per specification. (Connecting lead if required shall be paid separately)10.7.5 )400 amps Each 26442.00 1 26442.00

218 PWD ELECT 2020 10.15 Providing and fixing following rating current transformer in existing cubical panel including, connections, testing and commissioning etc. as per specification.10.15.3 )200/5 amps Each 347.00 3 1041.00

220 PWD ELECT 2020 10.17 Providing and fixing penal mounting 230 volt LED type indicating lamp in existing cubical panel including, connections, testing and commissioning etc. as per specification. Each 94.00 9 846.00

221 PWD ELECT 2020 10.18 Providing and fixing penal mounting following rating analog type ammeter of size 100x100 (NS) in existing cubical panel including, connections, testing and commissioning etc. as per specification.10.18.4 )0-500 amps Each 458.00 2 916.00

222 PWD ELECT 2020 10.20 Providing and fixing penal mounting 0-500 volt voltmeter of size 100x100 (NS) in existing cubical panel including, connections, testing and commissioning etc. as per specification.10.20.2 )Digital type Each 835.00 2 1670.00

223 PWD ELECT 2020 10.21 Providing and fixing penal mounting selector switch in existing cubical panel including, connections, testing and commissioning etc. as per specification.10.21.1 )For voltmeter Each 189.00 2 378.00

224 PWD ELECT 2020 10.21.2 For ammeter Each 207.00 2 414.00

225 PWD ELECT 2020 10.22 Providing and fixing following Time switch (timer) in existing panel including connection, testing and commissioning as per specification.10.22.2 )Analoge type Each 2525.00 1 2525.00

226 PWD ELECT 2020 10.23 Providing and fixing panel mounting digital type VAF (Volt-amp-frequency combined) Multi Function meter of size 100x100 (NS) in existing cubical panel including connection, testing and commissioning etc. as per specification. Each 1201.00 1 1201.00

227 PWD ELECT 2020 9.4 Supplying and fixing on surface/ recess horizontal type following way, 415 volts, TPN MCB distribution board of sheet steel phosphatized and powder painted, complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, including interconnections, earthing etc. as per specification. (But without MCB/RCCB/Isolator)9.4.5)6 way Double door Each 2038.00 14 28532.00

228 PWD ELECT 2020 9.5 Supplying and fixing on surface/ recess vertical type following way, 415 volts, TPN MCB distribution board of sheet steel phosphatized and powder painted, with 200 amps tinned copper busbar, common neutral link, earth bar, din bar, detachable gland/ knock out plate, including interconnections, earthing etc. as per specification. (But without MCB/RCCB/Isolator) (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)9.5.6)12 way (4 + 36), Double door Each 6820.00 2 13640.00

229 PWD ELECT 2020 9.11 Supplying and fixing SP MCB, 240 volts, 'C' curve, suitable for inductive load in the existing MCB DB complete with connections, testing and commissioning etc. as per specification.9.11.2)6 amps to 32 amps Each 148.00 332 49136.00

230 PWD ELECT 2020 9.16 Supplying and fixing TP&N MCB, 440 volts, 'C' curve, suitable for lighting and other loads in the existing MCB DB complete with connections, testing and commissioning etc. as per specification.9.16.5)63 amps Each 1316.00 16 21056.00

231 PWD ELECT 2020 12.1 Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as per specification and IS Code 3043: 1987(R 2016) Set 3243.00 16 51888.00

232 PWD ELECT 2020 12.12 Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including soldering, excavation and refilling the trench etc. as per specification. Metre 36.00 110 3960.00

233 PWD ELECT 2020 12.4 Supplying and laying 8 SWG copper wire at 0.50 metre below ground level for conductor earth electrode, including soldering etc. as per specification. Metre 77.00 210 16170.00

234 PWD ELECT 2020 12.6 Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode at 0.5 Metre depth below ground level including excavation and refilling the trench etc. as per specification. Metre 752.00 24 18048.00

235 PWD ELECT 2020 12.19 Providing maintenance free earthing with following size GI pipe including making bore pit of minimum 150mm dia, providing and laying approved make Earthing Electrode of Pipe-in-Pipe technology as per IS 3043(R 2016) -1987 made of corrosion free G.I. Pipes having outer pipe of 80mm dia and inner pipe of 50mm dia and filling with specified qty highly conductive compound around pipe and above that with soft soil in bore pit complete and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. as per specification:12.19.2 )With 2 metre long GI Pipes and 25 kg back filling compound. Each 8222.00 2 16444.00

236 PWD ELECT 2020 12.20 Excavation for foundation in soft soil/hard soil including dressing of sides and ramming of bottoms, lifting and getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 metres Cum 168.00 4.5 756.00

237 PWD ELECT 2020 14.2 Supplying and laying HDPE pipe of 4kg/Sqcm in ground below road, path etc at a depth not less than 40 cm and upto 90 cm including excavation, dismantling of road if required and refilling the trench with excavated material, ramming and making the surface good etc. as per specification.14.2.1 )63 mm outer dia Metre 124.00 465 57660.00

238 PWD ELECT 2020 14.2.4 110 mm outer dia Metre 355.00 150 53250.00

239 PWD ELECT 2020 14.2.6 160 mm outer dia Metre 664.00 210 139440.00

240 PWD ELECT 2020 14.3 Supplying and laying following size medium class G.I. pipe in ground below road, path etc at a depth not less than 40 cm and upto 90 cm including excavation, dismantling of road if required and refilling the trench with excavated material, ramming and making the surface good etc. as per specification.14.3.4 )150 mm internal dia Metre 1183.00 21 24843.00

241 PWD ELECT 2020 14.3.1 50 mm internal dia Metre 333.00 21 6993.00

242 PWD ELECT 2020 15.3 Supplying and laying following sizes one number FRLS PVC insulated /XLPE, PVC sheathed, steel armoured, aluminium conductor power cable of 1.1 KV grade in existing RCC/ HUME/ STONEWARE/ METAL/ HDPE pipe as per specification, IS: 1554 (1988, Part 1) / IS: 7098 (1988, Part 1).15.3.18 )3.5 x 185 sq. mm. Metre 586.00 180 105480.00

246 PWD ELECT 2020 15.23 Supplying and making end termination with brass compression gland and aluminum lugs for following size armoured aluminum conductor power cable of 1.1 KV grade as per specification. .15.23.19 )3½ X 185 sq. mm (50 mm) Each 385.00 8 3080.00

250 PWD ELECT 2020 19.7 Supply of hot dipped galvanized (in single dip to minimum 75 micron) octogonal pole made of 3mm thick steel grade E-350 sheet having window and flush cover with locking arrangement at suitable height from base for cable termination block, pole suitably reinforced with welded steel section at window cut section to make the strength of pole unaffected, with following minimum specifications with 4 way terminal connector including 3mm thick anchor plate, 4 nos 20mm dia foundation bolts of EN8 grade, and as per IS 2062 & BS EN: 10025. (designed for wind speed upto 180km/hr, IS: 875 Part 3)19.7.2 )7 metre high, dia 130mm at bottom and 90mm at top, base plate size 220x220x12mm, foundation bolts 700mm long Each 10938.00 8 87504.00

251 PWD ELECT 2020 19.11 Erection of GI octogonal/ tubular/conical pole on existing cement concrete foundation having grouted bolts and nuts, aligning in true vertical position as per specification.19.11.5 )7 metre high Each 850.00 8 6800.00

252 PWD ELECT 2020 19.12 Designing and providing suitable RCC foundation in Cement Concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) for 3 mere to 12 metre high GI octagonal pole including steel reinforcement form work, embeding 2 nos 50mm dia PVC pipe for cable entry in each foundation, excavation disposal of surplus soil and curing etc. as per specification. cum 924.00 3.932 3633.17

253 PWD ELECT 2020 19.9 Supply and fixing following street light pole bracket on existing pole made out of 50 mm dia MS "B" class pipe welded to 300 mm long MS pole canopy of suitable dia at a angle of 102.50 including having MS triangular stiffner of size 150 X 50 X 5 mm thick, making arrangement for tightening the bracket with pole by providing suitable size heavy duty nuts and bolts in canopy, painting with one coat of approved steel primer etc. as per specification.19.9.1 )Single Over Hang 0.75 metre Long Each 963.00 6 5778.00

254 PWD ELECT 2020 19.9.5 Double Over Hang 0.75 metre Long Each 1355.00 2 2710.00

255 PWD ELECT 2020 23.3 Supplying, installation, testing and commissioning of submersible pump set for water supply system with submersible motor directly coupled to multi-stage submersible pump of specified discharge capacity, head, delivery size in existing bore well including 2 sets of suitable size holding clamps made out of 50 mm X 6 mm MS flat, connection with suitable submersible cable of standard length etc. as per specification and IS: 694 (2010). Note: submersible Cable should be rust proof, safe from oil / Grease and under water Chemical / abrasion Resistant.23.3.4 )3.0 HP, three phase Each 22714.00 1 22714.00

256 PWD ELECT 2020 23.6 Supplying and fixing following dia HDPE pipe PE-80 Grade (8kg/sqcm) in single length in the suction/ delivery line of water supply pump etc. as per specification.23.6.2 )50 mm outer dia Metre 118.00 125 14750.00

257 PWD ELECT 2020 23.7 Supplying and fixing of following sizes GM gate valve ISI mark in the suction/ delivery line etc. as per specification.23.7.4 )50 mm dia. Each 1058.00 1 1058.00

258 PWD ELECT 2020 23.8 Supplying and fixing of following sizes GM non return valve ISI mark in the suction/ delivery line etc. as per specification.23.8.4 )50 mm dia. Each 1246.00 1 1246.00

259 PWD ELECT 2020 23.11 Supply, installation, testing and commissioning of 1-3 HP 1 phase submersible motor starter cum control wall/ floor mounted type made out of not less than 1.6 mm thick MS sheet and comprising of following panel mounting switchgears there in including connection inter-connection etc. as per specification. a) Phase indicating lamps with fuses and toggle switches 1 set b) 1/2/3 HP 1 phase DOL starter with over load and no volt relay 1 No c) 25 A "C" curve DPMCB 1 No d) Voltmeter 0-250 V 1 set e) Ammeter 0-10 A 1 set Each 4030.00 1 4030.00

260 PWD ELECT 2020 23.12 Supplying and fixing M.S. clamp 50 cm long made of 50mmx5mm thick M.S. Flat for holding the pipes and submerable pump set as per specification. Metre 291.00 2 582.00

261 PWD ELECT 2020 23.13 Supplying and fixing 300 mm dia 2 mm thick M.S. sheet cover with 3 cm edge in two past on tube well bore pipe as per specification Each 388.00 1 388.00

262 PWD ELECT 2020 23.14 Supplying, laying and fixing following size submersible cable along with GI/PVC/HDFC pipe line or laid in ground etc as per specification and IS: 694 (2010). Note: Cable should be rust proof, safe from oil / Grease and under water Chemical / abrasion Resistant.23.14.3 )3x4.0 sqmm Metre 90.00 150 13500.00

263 PWD ELECT 2020 23.15 Supplying and making water proof joint with heat shrinkable joint kit including copper ferrules for following size of 3 core submersible copper conductor cable of 1.1 KV grade as per specification.23.15.3 )3x4.0 sqmm Each 264.00 1 264.00

264 PWD ELECT 2020 23.16 Supplying and laying of approved make stainless steel wire rope of 6 mm dia for support of submersible pump set complete with tying to pump set and pump holding clamp. Metre 16.00 110 1760.00

265 PWD ELECT 2020 24.20 Supplying of approved make Hiwall split Inverter type Air Conditioner unit with cooling unit (copper coil) and condensing unit (copper coil) including 5 years compressor warranty and standard length of upto 5 metre of copper piping with insulation etc complete as per specification:24.20.2 )1.5 Ton split type Inverter AC {3 Star} Each 40358.00 2 80716.00

266 PWD ELECT 2020 24.4 Installation of split type Inverter/Non Inverter Air Conditioner unit, cooling unit on wall inside and condensing unit on out side wall/ ceiling/ floor at desired locations with existing standard length of copper piping with insulation and power cable including providing and fixing necessary good quality powder coated MS frame etc complete as per specification. (Extra length of copper piping and power cable shall be paid extra on linear basis) Each 2110.00 2 4220.00

267 PWD ELECT 2020 24.10 Supply, connecting and fixing extra length of copper piping for split type air conditioners of following dia and approved quality with insulation sleave etc complete as per specification24.10.1 )5/8 " Metre 375.00 10 3750.00

270 PWD ELECT 2020 24.11 Supplying and fixing good quality powder coated MS frame for installation of out door unit of split type Air Conditioner at desired location with atleast 6 nos steel fastners etc complete as per specification Set 435.00 2 870.00

271 PWD ELECT 2020 24.12 Supplying, connecting and fixing 15mm dia PVC flexible drain pipe (reinforced with nylon threads) in drain outlet of split type air conditioners etc complete as per specification Metre 14.00 20 280.00

272 PWD ELECT 2020 27.11 Supplying , installation , testing and commissioning of 4 MP Bullet Camera weather & dust proof IP based Fixed Lens day/night Camera (IP67 , IK 10) , 1/3” 4MP PS CMOS Image Sensor, H.265 and H.264 triple-stream encoding, WDR(120dB), Day/Night Support, UL ,CE FCC Certified as per the specifications. Each 6353.00 9 57177.00

273 PWD ELECT 2020 27.19 Supplying , installation , testing and commissioning of 16 Channel NVR 2 Sata port Up to 16 channel IP camera input , Max 200Mbps incoming bandwidth ,Smart H.265+/H.265/Smart H.264+/H.264 dual codec decoding , Up to 8MP resolution preview and playback , Support 2 SATA HDDs up to 6 TB each, 2 USB(1 USB3.0, 1 USB2.0) , 1 HDMI / 1 VGA simultaneous video output ,ONVIF Version 2.4 conformance , Alarm In / out 4/2 , Two way talk 1 Channel Input, 1 Channel Output RCA , 1 RJ-45 port (10/100/1000Mbps) as per the specifications. Each 12252.00 1 12252.00

274 PWD ELECT 2020 27.25 Supplying , installation , testing and commissioning of 4 Port POE Switch 10/100 4 Port PoE with 2 10/100 Mbps Uplink ,Power Budget 60 Watt , Max 30 watt per port as per the specifications. Each 2773.00 1 2773.00

275 PWD ELECT 2020 27.37 Supplying , installation , testing and commissioning of 4 TB Surveillance Hard disk drive Complete as required Each 9565.00 2 19130.00

276 PWD ELECT 2020 27.44 Supplying , installation , testing and commissioning of 4U Indoor Rack Wallmount 4U 400D With Front Glass Door Lock & Key 550 4U - (fan; cable manager; PDU) complete as required. Each 3132.00 1 3132.00

277 PWD ELECT 2020 27.49 Supplying, installation, testing and commissioing of following size LED Monitor, table/wall mount with inbuild speaker minimum 5Wx2,with minimum 1 No of HDMI and USB port including remote control, connecting cable, batteries, and all accessories, connection etc complete as per specification. 27.49.2)43 inch Each 43178.00 1 43178.00

278 PWD ELECT 2020 24.23 Supplying, installation, testing and commissiong of following size drinking water cooler storage type ISI marked, eco friendly non CFC refrigarant, water tank and cooler cabinet sheet material- stainless steel {grade AISI 304} with thickness>= 0.8 mm, with PUF insulation including all accessories connection etc complete as per specification. 24.23.2 )60/120 Ltrs/hr Each 34581.00 1 34581.00

279 PWD ELECT 2020 24.24 Supplying, installation, testing and commissiong of following capacity of RO purification system with UF/UV/TDS controler and UV lamp {IS 14724 Ultra voilet disinfection} and minimum three stage purification, automatic on/off, output water conferming standard IS 10500 with inbuild storage tank including all accessories connection etc complete as per specification. 24.24.1 )25 Ltrs/hr output capacity Each 23508.00 1 23508.00

280 PWD ELECT 2020 30.1 Earth work in all type soil except soft rock / hard rock with all lead and 1.5 metre lift, dressing, stacking excavated strata including refilling of excavated soil in trench / pit to ground level complete as per specification. cum 168.00 44.23 7430.64

G. Total 45655062.46

Say Rs. 456.55 Lacs

Sub Engineer S.D.O. P.W.D. Sub Division Khairagarh Executive Engineer P.W.D. Division Khairagarh

Department Name Code SOR Name SOR UOM Name UOM Code false6329

Bastar Urban Public Transport Society (BSTUPTS) BSTUPTS ELECTRIC ELECT Percentage %

Bilaspur Urban Public Transport Society (BSPUPTS) BSPUPTS NON SOR NS Per mile %O

Chhattisgarh Department of Agriculture (CGDA) CGDA BRIDGE PWD_BRIDGE 1000 no. 1000 no.

Chhattisgarh Handicraft Board (CGHCB) CGHCB PWD BUILDLING PWD BLD 1000No. 1000No.

Chhattisgarh High Court, Bilaspur (CGHC) CGHC PWD ROAD PWD ROAD Siemens Per meter A/V

Chhattisgarh Housing Board (CGHB) CGHB Acre ACR

Chhattisgarh Infotech Promotion Society (CHiPS) CHiPS Activity unit AU

Chhattisgarh Medical Services Corporation Ltd. (CGMSC) CGMSC Bag BAG

Chhattisgarh Police Housing Corporation Ltd (CGPHC) CGPHC Book BK

Chhattisgarh Rajya Beej Evam Krishi Vikas Nigam (CGRBEKVN) CGRBEKVN Box BOX

Chhattisgarh State Civil Supplies Corp. Limited (SCSC) SCSC Gallons per hour (US) BPH

Chhattisgarh State Industrial Development Corporation (CSIDC) CSIDC Bottle BT

Chhattisgarh State Mandi Board (CGSMB) CGSMB Cubic sentimeter /second C3S

Chhattisgarh State Minor Forest Produce(Trading & Developme) Co-Operative Federation Ltd (CGMFPFED) CGMFPFED Canister CAN

Chhattisgarh State Power Distribution Company Limited (CGSPDCL) CGSPDCL Carton CAR

Chhattisgarh State Power Generation Company Limited (CGSPGCL) CGSPGCL Cubic Centimeter CCM

Chhattisgarh State Power Transmission Company Limited (CGSPTCL) CGSPTCL Cubic decimeter CD3

Chhattisgarh State Warehousing Corporation (CGSWC) CGSWC Centiliter CL

Chhattisgarh Text Book Corporation (CGTBC) CGTBC cm cm

Department of Animal Husbandry and Dairy (DAHD) DAHD Centimeter CM

Department of Home Guard and Civil Defence Chhattisgarh (HGCD) HGCD Square centimeter CM2

Department of Panchayat and Social Welfare (DPSW) DPSW Crate CRT

Department of School Education (DSE) DSE Case CS

Department of Technical Education (DTE) DTE Cu.Mtr. Cu.Mtr.

Directorate of Fisheries (DF) DF cum cum

Durg-Bhilai Urban Public Transport Society (DBUPTS) DBUPTS cum.km cum.km

Food and Drug Administration (FDA) FDA Days DAY

Health Department (HD) HD Degree DEG

Indira Gandhi Krishi Vishwavidyalaya (IGKV) IGKV DFLT DFLT

Korba Urban Public Transport Society (KRBAUPTS) KRBAUPTS Decimeter DM

Koriya Urban Public Transport Society (KRYAUPTS) KRYAUPTS Drum DR

Mineral Resources Department (MRD) MRD Dozen DZ

Naya Raipur Development Authority (NRDA) NRDA EACH EA

Panchayat and Rural Development (PARD) PARD each each

Public Health Engineering Department (PHED) PHED each additional floor each additional floor

Public Works Department (PWD) PWD each cut each cut

Raigarh Urban Public Transport Society (RIGUPTS) RIGUPTS each test each test

Raipur Collectorate (RC) RC each tree guard each tree guard

Raipur Development Authority (RDA) RDA each tree guard each tree guard

Raipur Urban Public Transport Society (RUPTS) RUPTS Enzyme Units / Milliliter EML

Rajnandgaon Urban Public Transport Society (RNDGUPTS) RNDGUPTS Enzyme Units EU

Rural Engineering Services (RES) RES Fluid Ounce US FOZ

Sarguja Urban Public Transport Society (SUPTS) SUPTS Feet FT

State Urban Development Agency (SUDA) SUDA Square foot FT2

Urban Administration and Development Department (UADD) UADD Cubic foot FT3

Water Resources Department (WRD) WRD Gigajoule FY

gram act.ingrd /liter G/L

Gram act.ingrd. GI

Gram /liter GLI

Gram /square meter GM2

Gram/Cubic meter GM3

Gallons per mile (US) GPM

hectare hectare

Joule /kilogram JKG

Kilogram act.ingrd KAI

Kilogram /cubic decimeter KD3

Kilogram/Mol KGM

Kilogram /Second KGS

Kilogram / cubic meter KGV

kg act.ingrd /kg KIK

Kilojoule/kilogram KJK

Kilojoule/Mol KJM

Square kilometer KM2

Kilometer/hour KMH

Kelvin/Minute KMN

Kelvin /Second KMS

Kilonewton per square meter KNM

Kilovoltampere KVA

Liter per 100 km LHK

Liter /Minute LMI

Liter /Molsecond LMS

Liter Per hour LPH

1/square meter M-2

Mol per cubic meter M:M

Megawatt hours M..

Meter /Hour M/H

Mol per liter M/L

Meter /second M/S

Square meter M2

Square meter/Coat M2C

Square meter/second M2S

Cubic meter /Hour M3H

Cubic meter/second M3S

Milligram/liter MGL

Milligram /cubic meter MGQ

Square mile MI2

Microsecond MIS

Milliliter act.ingr. MLI

Square millimeter MM2

Cubic millimeter MM3

Millinewton/meter MNM

Miles per gallon (UG) MPG

Millimol per liter MPL

Millipascal seconds MPS

Meter/second squared MS2

Microsiemens per centimeter MSC

Newton/meter NM

Newton/Square millimeter NMM

one RCC jaali tree guard one RCC jaali tree guard

one RCC jaali tree guard one RCC jaali tree guard

P.cumt. P.cumt.

P.Point P.Point

p.sq.mtr p.sq.mtr

P/sq.Mt. P/sq.Mt.

Pascal second PAS

Megavoltampere PCT

per cm height per letter per cm height per letter

per cm height per letter per cm height per letter

per cubic centimeter per cubic centimeter

Per Km. Per Km.

per letter per letter

Per mtr Per mtr

per pouch per pouch

per test per test

per tonne per tonne

per tonne capacity per tonne capacity

per.mtr per.mtr

Parts per billion PPB

Parts per million PPM

Parts per trillion PPT

Number of persons PRS

Pound Per Sq inch PSI

Pint, US liquid PT

Per Ton Per KM PTPK

Quart, US liquid QT

quintal quintal

Gramm/cubic centimeter RHO

RUNNING METRE RMT

Thousand Hours THR

Ton/Cubic meter TOM

DEFAULT UNIT DESCRIPTION XXX

Square Yard YD2

Microgram /liter µGL

Microgram /cubic meter µGQ