Loading…
Loading…
Tender Value
₹2.2 Cr
EMD Value
₹2.6 L
Closing Date
9 Jan 2026, 11:30 amClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
TENDER
14 conditions · 2 needing a document upload
10.2.The tenderer must have minimum average annual contractual turnover of V/N or V whichever is less; where. V=Advertised value of the tender in crores of Rupees. N=Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turn over. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported byAudited Balance Sheet.
Technical Eligibility Criteria: (a) The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work each costing not less than the amount equal to 60% of advertised value of the tender. b(1) In case of tenders for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note for b(1): Separate completed works of minimum required values shall also be considered for fulfillment of technical eligibility criteria for different components. (b) (ii) In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity. (b) (3) To evaluate the technical eligibility of tenderer, only components of work as stipulated in tender documents for evaluation of technical eligibility, shall be considered. The scope of work covered in other remaining components shall be either executed by tenderer himself if he has work experience as mentioned in clause 7 of the Standard General Conditions of Contractor through subcontractor fulfilling the requirements as per clause 7 of the Standard General Conditions of Contract or jointly i.e., partly himself and remaining through subcontractor, with prior approval of Chief Engineer in writing. However, if required in tender documents by way of Special Conditions, a formal agreement duly notarised, legally enforceable in the court of law, shall be executed by the main contractor with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer for considering subletting of that scope of work towards fulfilment of technical eligibility. Such subcontractor must fulfill technical eligibility criteria as follows. The subcontractor shall have successfully completed at least one work similar to work proposed for subcontract, costing not less than 35% value of work to be subletted, in last 5 years, ending last day of month previous to the one in which tender is invited through a works contract. Note: for subletting of work costing up to Rs 50 lakh, no previous work experience of subcontractor shall be asked for by the Railway. In case after award of contract or during execution of work it becomes necessary for contractor to change subcontractor, the same shall be done with subcontractor(s) fulfilling the requirements as
Defination of Similar Work :- Execution of any signalling works (EI/RRI/PI/ABS/IBS/LC Gate/Axle Counter/ATP /Double Distant/ELD/Datalogger/RDPMS) including either indoor or outdoor or both. (OR) Auto Fuse Change over systems.
6 conditions · 5 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
As per GCC Clause 14.0 Documents to be Submitted Along with tender. (i)The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / Hindu Undivided Family (HUF) /Limited Liability Partnership (LLP) etc. The tenderer(s) shall enclose the attested copies of the Constitution of their concern, and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be.
ii) Following documents shall be submitted by the tenderer: (a)Sole Proprietorship Firm: (i) All documents in terms of Para 10of the Tender Form (Second Sheet) above. HUF: (ii)A copy of notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (iii)All other documents in terms of Para 10 of the Tender Form (Second Sheet) above. (c) Partnership Firm: (i) All documents as mentioned in para18 of the Tender Form (Second Sheet). (d) Joint Venture (JV): All documents as mentioned in para 17 of the Tender Form (Second Sheet). (e) company registered under Companies Act 2013: (i)The copies of MOA(Memorandum of Association) / AOA (Articles of Association) of the company (ii)A copy of Certificate of Incorporation (iii)A copy of Authorization/Power of Attorney issued by the Company(backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (iv)All other documents in terms Para 10 of the Tender Form (Second Sheet) above. (f) LP Limited Liability Partnership): If the tender is submitted on behalf of a LLP registered under LLP Act-2008, the tenderer shall submit along with the tender: (v)A copy of LLP Agreement (vi) A copy of Certificate of Incorporation (vii)A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (viii)An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were / are partners/ members. Concealment /wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract. (ix)All other documents in terms of Para10 of the Tender Form (Second Sheet). (g)Registered Society &Registered Trust: The tenderer shall submit: (x)A copy of the Certificate of Registration (xi) A copy of Memorandum of Association of Society/Trust Deed (xii) A copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust. (xiii)A copy of Rules & Regulations of the Society. (xiv) All other documents in terms of Para 10 of the Tender Form (Second Sheet) above (iii) If it is NOT mentioned in the submitted tender that tender is being submitted on behalf of a Sole proprietorship firm / Partnership firm / Joint Venture / Registered Company etc., then the tender shall be treated as having.
15. The tenderer whether sole proprietor / a company or a partnership firm / joint venture (JV) / registered society / registered trust / HUF / LLP etc if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, specifically authorizing him/them to sign the tender, submit the tender and further to deal with the Tender/ Contract up to the stage of signing the agreement except in case where such specific person is authorized for above purposes through a provision made in the partnership deed / Memorandum of Understanding / Article of Association/Board resolution, failing which tender shall be summarily rejected. A separate power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, shall be submitted after award of work, specifically authorizing him/them to deal with all other contractual activities subsequent to signing of agreement, if required. Note: A Power of Attorney executed and issued overseas, the document will also have to be legalized by the Indian Embassy and notarized in the jurisdiction where the Power of Attorney is being issued. However, the Power of Attorney provided by Bidders from countries that have signed the Hague Legislation Convention 1961 are not required to be legalized by the Indian Embassy if it carries a conforming Apostille certificate
As per GCC 2022): The tenderers shall submit a copy of certificate stating that all their statements/ documents submitted along with bid are true and factual. Standard format of certificate to be submitted by the bidder is enclosed as Annexure-V (Annexure-V of GCC April 2022). Non submission of above certificate by the bidder shall result in summarily rejection of his/their bid (Clause 6.1 of GCC2022 PART-I) ( Click here to download Format) ( Click here to download Format)
As per GCC Clause No.18.10 The tenderer shall clearly specify that the tender is submitted on behalf of a partnership firm. The following documents shall be submitted by the partnership firm, with the tender: (i) A notarized copy of partnership deed or a copy of the Partnership deed registered with the Registrar.. (i) A notarized or registered copy of Power of Attorney (duly registered as per prevailing law) in favour of the individual to tender for the work, sign the agreement etc. and create liability against the firm. (ii) An undertaking by all partners of the partnership firm that they are not blacklisted or debarred by Railways or any other Ministry/Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP in which they were / are partners/members. Any Concealment / wrong information in regard to above shall make the bid ineligible or the contract shall be determined under Clause 62 of the Standard General Conditions of Contract.
Provision of Auto changeover of fuse system in indoor at stations and Auto signalling Huts with alarm over Hyderabad Division
Y-SG-36-2025-26-28~SCR
Y-SG-36-2025-26-28
Open
Works - General
12 Months
Hyderabad, Telangana
₹0
₹2.6 L
9 Jan 2026
10 Dec 2025
26 Dec 2025
17 items across 3 schedules · ₹2,20,67,516.04 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Supply of Fuse Auto Changeover system of various types of fuses with audio visual indication as per Specn RDSO/SPN/209/2012 Ver. 2.0 or latest. One module shall be able to cater for 32 numbers of fuses.(INSPECTION: RDSO) | Set | 368.00 | 46,656 | 1,71,69,408 |
| 2 | Supply of 60 core Indoor Cable with 0.6mm conductor diameter as per Specn IS 694: 2010 or latest, IRS: S 76-89 Amd.3 or latest. (INSPECTION: RDSO) | Kilometre | 6.00 | 1,91,009 | 11,46,054 |
| 3 | Supply of Multi-strand, single core, copper conductor 16/0.2 (16 wires, diameter of each wire is 0.20mm) (0.55q.mm) wire coil as per specifications IS 694:2010 or latest, IRS: S 76- 89 Amd.3 or latest. Length of coil should be 100m. Colour of coil to be specified by Engineer in charge. (Coil) (INSPECTION: RDSO) | Numbers | 335.00 | 1,153 | 3,86,255 |
| 4 | Supply of Non-deteriorating type of Fuse Holders and Fuse Links 240V AC/DC as per spec knife edge type fuse of El Fuse Link type (up to 20A) - Fuse Holder 20A capacity. (INSPECTION: RDSO) | Numbers | 350.00 | 220 | 77,000 |
| 5 | Supply of Non-deteriorating type of Fuse Holders and Fuse Links 240V AC/DC as per spec knife edge type fuse of El Fuse Link type (up to 20A) - Fuse link 1A/2A/6A/ 10A/16A/20A as specified by Engineer In charge. (INSPECTION: RDSO) | Numbers | 781.00 | 31 | 24,211 |
| Schedule total | ₹1,88,02,928 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .