CERTAIN REPAIR TO ROAD AND ROAD FURNITURE UNDER AGE BR II

Amount

M&L for forming embakments including raising (or lowering earth spread in layersn.exc 30 cm thick watering ramming /rolling and finishing to required size shape etc 1.5 m high from base complete all as specified and directed.

Rolling and consolidating formation surfaces in cutting for road berms by roller exc 8 ton and n.exc 12 ton complete all as specified and directed

Material and labour for preparing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags/air compressor to remove all loose dirt etc and applying evenly a priming/track coat with bituminous primer VG-10 @ 5kg per 10 Sqm and laying bituminous Premixed semi dense asphaltic concrete 30mm thick (minimum consolidated thickness) with 5.5% (approx) bitumen VG-30 binder content by weight of total mix, rolled and compacted with 8 to 12 Tonne power road roller to required gradient and camber complete all as specified Note : (a) Material for SDAC shall be mixed in hot mixing plant. (b) Mix design of bitumenous SDAC will be got done from approved Lab. (c) The quantity of bitumen used at site shall be as per mix design fourmula aprooved by GE. (d) The pemix carpet shall be laid with mechanical paver.

Material and labour for premix bituminous macadam laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) and bitumen VG-30 binder content of 4% by weight of total mix using coarse aggregate grading 2 (63mm to 40mm size) rolled with 8 to 12 tonne power road roller complete all as specified and directed. Note : (a) Material for premix bituminous macadam shall be mixed in hot mixing plant. (b) The premix bituminous macadam shall be laid with mechanical paver. (c) The cost of aforesaid is deemed to be included in the quoted rate.

Repair to pot holes of depth, exc 30mm area not exc 1.0sqm each including sweeping free from dust and mud or water scoring sunken surfaces in roads, paths etc cutting around edges to at least 30mm in depth and making good by applying tack coat with paving bitumen VG-10 @ 5Kg per 10 Sqm, putting in premixed bituminous macadam well rammed and sealed with bitumen VG-30 binder @ 9.8Kg per 10 Sqm, blinded with 0.09 cum of stone chippings 6.3mm size and again well rammed to true surface (including supply of premix macadam binder and chipping to uniform surface) depth of pot holes not exc 30mm complete all as specified and directed. Note : (a) Material for premixed bituminous macadam shall be mixed in hot mixing plant.

Material and Labour for marking lines dashes, arrows, letters etc on road pavement and the like of any width with using thermoplastic compound white paint hot applied 1.25 mm thick including glass with machine confirming to BS3262 and according to the specification laid down IRC & MOST (Ministry of Surface Transport) specification 20011(4th revision) complete all as specified. Note:- Marking shall be carried out with thermostat machine

Supply and fixing in repair for road solar stud size 125x125x25mm made from aluminium alloy and PC construction, solar powered by monocrystel solar panel alongwith high capacity rechargable battery (led - 10mm, 3 pieces each side and total 6 pieces are used for high brightness) water proof confirming to IS-67-1977 having load capacity of 40 tonnes complete all as specified and directed. Make :- Dark Eye Cat Part No DA-110 or equivalent of Makes specified in list of Makes

Supply and fixing in repair road stud colours ABS plastic dynamically design having high impact strength high density and fixed with two numbers reflectors on both side size 110x128x29.50mm

GORAYA AND CO

TARSAM LAL SAINI CONTRACTOR