Construction of Seminar Hall at First Floor of Union Bhawan.

Hindustan Aeronautics Limited

(Avionics Division, Korwa)

DEPARTMENT OF CIVIL ENGINEERING

CHECK LIST FOR SUBMITTING E-TENDER

NAME OF WORK:- Construction of Seminar hall at First Floor of Union Bhawan.

NIT No.- HAL/KWD/Civil/09 of 26-27 Date: 24.06.2026

Name of Contractor:

S. N. Essential Criteria /Desirable criteria. Please write submitted or not submitted below

1 ANNUAL TURN OVER: -Average Annual Turnover during the last 3 years, ending 31st March-2025 of previous financial year, should be at least 30% of the approximate estimated amount put to tender. The Bidder should upload profit & loss statement for the last three years duly certified by Chartered accountant with UDIN. (Supported with Income Tax return, Balance Sheet etc.).

2 EMD (As per NIT)

3 SOLVENCY CERTIFICATE- Solvency certificate from any nationalized or scheduled bank i.e.minimum 40% of Estimated value.

4 EXPERIENCE: Experience of having successfully completed similar works during last 7 years ending last day of month previous to the one in which applications are invited should be either of the following.

5 Three similar completed works each costing not less than the amount equal to 40% of the approx estimated amount. OR

i) Two similar completed works each costing not less than the amount equal to 50% of the approx estimated amount. OR

ii) One similar completed work costing not less than the amount equal to 80% of the approx estimated amount.

6 Registration certificate with Government department and Government undertaking, if any.

7 Proof of GST registration

8 Copy of PAN/ GIR No. Registration Certificate issued by Income Tax Authority.

9 Constitution and legal status.( Partnership/ Proprietary)

10 Details of Bank name , brance code, address, IFS code and Account number on letter head.Please attach scanned copy of blank cheque for reference.

11 The rate quoted shall be inclusive of all taxes. Tenderers are required to make the DATA ENTRY of the item rate in figures only and rate in words will be automatically generated.

12 Tenderers are required to attach Format of undertaking as per Annexure I & J

13 Signature done, wherever required.

Abstract Estimate

Name of Work : Term contract for Civil Maintenance works in Township at HAL Korwa. 2017-18

Time Required for

(a) Conclusion of contract- 03month

(b) Completion of works- 12 Months

Sl. No. Particulars Amount In Rs. Reference

1 Term contract for civil maintenance works in township for repair & maintenance of buildings, water supply lines, sanitary fittings, approach roads, floors, pavings etc and allied civil works required for completion of work.

a Civil Works #REF! [Annexure- D-1]

2 Add 5% towards contigencies #REF!

Grand Total #REF!

Say ` 14.07 Lakhs

Sr. Manager (Works ) ATA

(Satyendra K Maurya) (SK Chaudhury)

Name of Work : Term contract for Civil Maintenance works in Township at HAL Korwa. 2017-18

1 SCHEDULE - "A" (PART-A) #REF!

2 SCHEDULE - "A" (PART-B) #REF!

Contingency @ 5% #REF!

Grand total #REF!

SAY : 14.07 Lakhs

HINDUSTAN AERONAUTICS LIMITED

AVIONICS DIVISION, KORWA

POST OFFICE: HAL, TEH: AMETHI

DISTT: AMETHI (UP) - 22 74 12

HINDUSTAN AERONAUTICS LIMITED

AVIONICS DIVISION, KORWA

POST OFFICE: HAL, TEH: AMETHI

DISTT: AMETHI (UP) - 22 74 12

Name of Work:- Construction of Seminar hall at First Floor of Union Bhawan.

NIT No.- HAL/KWD/Civil/09 of 26-27

Note:- Tenderers are requested to quote their offer in percentage either above or below on CPWD DSR-2023 Volume I & II (Rates). All relevant items shall be executed as per CPWD specifications and CPWD DSR 2023, materials specifications shall be as mentioned in the Bill of quantities and as per the List of approved make/brand as provided in tender document and as per the direction of Engineer-in-charge.

NAME OF AGENCY (To be filled in highlighted box ) :

Sl. No. Description of item Qty. Unit Rate derived excluding GST @18% Amount excluding GST @18% in (Rs.)

Part-A -Civil items

1 Earthwork Excavation in foundation trenches, column footing drains, manholes, chambers or any description of similar types of excavation works in all soils except hard rock upto 1.50 mt. depth getting out, including dressing and levelling of trenches sides and also returning filling, dewatering if required etc., all complete as per drawing, specifications and direction of E.I.C. 25.00 Cum 220.77 5519.25

2 Dismantling of Brick Works of any description and in any position including stacking of serviceable material and disposal of unserviceable material of debris at directed place, including cost of transportation, cleaning the area, labour, T&P etc all complete as directed by EIC. 3.00 Cum 1747.36 5242.08

3 Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge. 78.00 Sqm 2.93 228.54

4 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead including cost of transportation, cleaning the area, labour, T&P etc all complete as directed by EIC. 10.00 Sqm 46.35 463.50

5 Providing & laying PCC: 1:4:8(1 Cement : 4 coarse sand (zone-Ill) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) in foundation, under floors or any other similar description of works eg. drains, pipe lines bedding layers, manholes, road, chambers, duct etc with mechanical mixing including form work, side shuttering, compaction, curing including , materials, labour, T&P etc, required for proper completion of the work as per specification and direction of E.I.C 10.00 Cum 5777.61 57776.10

6 Providing and laying in position specified grade of reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand (zone-Ill} derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). All work up to plinth level, excluding the cost of centering, shuttering, finishing and reinforcement all complete with labour, material, T&P etc. as per specification and direction of E.I.C 7.00 Cum 7672.16 53705.12

7 Providing and laying in position specified grade of reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand (zone-Ill} derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). All work above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement all complete with labour, material, T&P etc. as per specification and direction of E.I.C 19.00 Cum 9204.94 174893.86

8 Providing, fixing and laying TMT reinforcement bars conforming to IS-1786-1985, for any diameter of TISCON / SAIL/ RINL/ Kamdhenu or any other approved make for all type of R.C.C works including straighting, cut to length, bend to shape required, cranking, bending spirally or hooping, spacers / chairs, wastages and binding with mild steel wires (annealed) not less than 0.90 mm diameter or securing with clips so that placing and ramming of concrete will not displace it (RCC) also including cost of all labour, material, T&P etc. all complete at all height as per drawing, specification and direction of E.I.C 2600.00 Kg 91.47 237822.00

9(a) Providing, fabricating, fixing and removing, Form work / shuttering of side of Foundations, footings, bases of columns, etc. for mass concrete with true line & plumb etc. with plywood / MS plates shuttering including oiling of the top surfaces of shuttering , all supports with MS or wooden logs including all braces, struts, balli, etc, with working scaffoldings, ladders, gangways, use & wastage of timber, removal of formwork & shuttering after the stripping period etc. including all labour, material, T&P, transportation, wastage and other required fixture for proper completion of work as per specification and direction of E.I.C. 10.00 Sqm 332.60 3326.00

9(b) Providing, fabricating, fixing and removing, Form work / shuttering of side of Lintels, beams, plinth beams, girders, bressumers and cantilevers with true line & plumb etc. with plywood / MS plates shuttering including oiling of the top surfaces of shuttering , all supports with MS or wooden logs, all braces, struts, balli, etc,with working scaffoldings,ladders, gangways, use & wastage of timber, including removal of formwork & shuttering after the stripping period etc. including all labour, material, T&P, transportation, wastage and other required fixture for proper completion of work as per specification and direction of E.I.C. 54.00 Sqm 624.58 33727.32

9(C ) Providing, fabricating, fixing and removing, Form work / shuttering of side of Columns, Pillars, Piers, Abutments, Posts and Struts with true line & plumb etc. with plywood / MS plates shuttering including oiling of the top surfaces of shuttering , all supports with MS or wooden logs including all braces, struts, balli, etc, with working scaffoldings,ladders, gangways, use & wastage of timber, including removal of formwork & shuttering after the stripping period etc. including all labour, material, T&P, transportation, wastage and other required fixture for proper completion of work as per specification and direction of E.I.C. 31.00 Sqm 815.33 25275.23

9(d ) Providing, fabricating, fixing and removing, Form work / shuttering of Suspended floors, roofs, slab, sunshed, landings, balconies and access platform etc. with plywood / MS plates shuttering including oiling of the top surfaces of shuttering , all supports with MS or wooden logs including all braces, struts, balli, etc, with working scaffoldings,ladders, gangways, use & wastage of timber, including removal of formwork & shuttering after the stripping period etc. including all labour, material, T&P, transportation, wastage and other required fixture for proper completion of work as per specification and direction of E.I.C. 94.00 Sqm 786.45 73926.30

10(a) Providing and laying Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in cement mortar 1:6 ( 1 cement : 6 coarse sand) in foundation and in foundation and plinth, for walls, drains, manholes, chambers, ducts etc or any description of similar works, including necessary cutting of bricks as required , wastages,straight or curved, work up to any height or depth including cost of scaffolding , raking out joints up to 1 cm depth as the work proceeds, including all material, labour, T&P, curing, scaffolding, wastage etc. required for proper completion of work and as per specification and direction of EIC. 4.00 Cum 6049.23 24196.92

10(b) Providing and laying Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in cement mortar 1:6 ( 1 cement : 6 coarse sand) in superstructure above plinth level including necessary cutting of bricks as required , wastages,straight or curved, work up to floor V level including cost of scaffolding , raking out joints up to 1 cm depth as the work proceeds, including all material, labour, T&P, curing, scaffolding, wastage etc. required for proper completion of work and as per specification and direction of EIC. 52.00 Cum 7723.22 401607.44

11 Providing and laying Half Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in cement mortar 1:4 ( 1 cement : 4 coarse sand) in superstructure above plinth level including necessary cutting of bricks as required , wastages,straight or curved, work up to floor V level including cost of scaffolding , raking out joints up to 1 cm depth as the work proceeds, including all material, labour, T&P, curing, scaffolding, wastage etc. required for proper completion of work and as per specification and direction of EIC. 7.00 Sqm 953.15 6672.05

12 Providing and laying 40 mm thick, cement concrete flooring 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size of Bharatcoop/Dala/Jhansi) laid in panels, finished with a floating coat of neat cement slurry including rounding of edges, making /finishing surface even and smooth with using extra cement , in required shape , size & gradients etc including all labour, material, T&P, side shuttering, curing etc all complete as per specification and direction of EIC. 42.00 Sqm 520.93 21879.06

13 Providing and fixing glass dividing strip 04 mm thick and 40 mm wide in cement concrete flooring including cutting, placing in position / panels as per designed size and gradient, all labour, material, wastages, curing , T&P, etc complete all as required and directed by EIC. 52.00 RM 77.82 4046.64

14 Providing and laying matt finished vitrified tile of size 300x300x9.8 mm or 400x400x9.8 mm of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20 mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. 42.00 Sqm 1234.61 51853.62

15 Providing, laying and fixing 20-22 mm thick coloured chequered precast cement concrete tiles size 25 x25 cm or 30 x 30cm or as directed by EIC over a bedding layer of 20 mm thick average cement sand mortar 1:4 (1 cement : 4 Coarse sand) jointed and pointed with pigmented neat cement slurry in floors and a coat of cement painting on finished surface with matching colour . All complete with labour and material, wastage, tool & Plants required for proper completion of works etc. as directed by EIC. 55.00 Sqm 1189.11 65401.05

16 Providing and laying cement concrete 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size of Bahratcoop /Dala / Jhansi) in floor, pavement, drain beds or any other similar description of works etc. in required shape, size and gradients, including manual / mechanical mixing, wastage, compaction, curing also making contraction joints/grooves if required in pavement with all labour, material, T&P etc all complete as per direction of EIC. 5.00 Cum 7289.99 36449.95

17 Providing, rendering, dubbing out cement plastering 15 mm thick with cement mortar 1:6 (1 cement: 6 coarse sand) on walls, darins, manholes, ducts etc of rough / fair faces of brick wall / concerete surface including plaster at all floors including jams, soffit and edges of plastering chamfering wherever required, finishing of surface even and smooth without using extra cement with all labour, material, scaffolding, curing, including hacking of concrete surfaces, T&P etc all complete as per specification and direction of EIC 278.00 Sqm 335.32 93218.96

18 Providing ,rendering, screeding, dubbing out cement plaster 15 mm thick at any depth / height in cement mortar 1:4 (1 cement : 4 Coarse sand )on brick or concrete surfaces of any description fair/rough side ,finishing fair or trowelled to a smooth & even finish with using extra cement including scaffolding ,labour, material, curing, T&P etc. all complete as per specification and direction of EIC. 16.00 Sqm 405.33 6485.28

19 Providing ,rendering, screeding, dubbing out cement plaster 12 mm thick on ceilings at any depth/height in cement mortar 1:4 (1 cement: 4 Coarse sand ) on brick or concrete surfaces of any description fair/rough side ,finishing fair or trowelled to a smooth & even finish without using extra cement including scaffolding ,labour, material, curing, T&P etc. all complete as per specification and direction of EIC. 64.00 Sqm 303.09 19397.76

20 Providing and laying integral cement based water proofing treatment i.e. Brick Coba With average thickness of 120 mm and minimum thickness at khurra as 65 mm. including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound as approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. 80.00 Sqm 1428.80 114304.00

(c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound as approved by Engineer-in-charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound as approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. “All above operations to be done in order and as directed and specified by the Engineer-in-Charge”:

21 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete including all material, labour, T&P, curing, wastage etc. as per specification and direction of EIC. 3.00 Nos. 252.96 758.88

22 Providing & applying approx. 1 mm thick wall care putty with priming coat of make birla, berger , ACC or approved make on surface to give a smooth & even finish at all floors on walls / ceilings or any description of works including removing of existing treatment, preparation of surface smooth & even, filling holes / minor pits all complete with labour, material, scaffolding, T&P etc all complete as per specification and direction of Engineer-in-charge. 589.00 Sqm 132.35 77954.15

23 Providing & applying two coats of weather resistant exterior paint of first quality of approved shade and make like apex of Asian /weather coat long life of Berger/weather shield max of ICI etc including preparation of surfaces, by brooming down, removal of flakes, oil, grease marks by sand papering where required, filling holes /Cracks with birla putty / snowfilla, spreading and removing covering to doors, windows, fittings, floor, etc. to protect from splashes, removing & replacing moveable furnitures, leaving the premises clean and tidy, disposing Rubbish outside in dustbins removal of all splashes and cleaning glass and joinery, use of scaffolding all complete as per specification & direction of EIC. 334.00 Sqm 102.41 34204.94

24 Providing and applying two coats of acrylic distemper of approved brand and shade such as Asian/Berger etc. on wall / ceiling including surface preparation, removing of nails, filling holes / minor pits , cracks with Birala putty wherever required etc., spreading & removing covering to doors, windows, floors, fittings etc. to protect them from splashes, removing & replacing furniture, movable cupboards, blinds etc., washing floors, cleaning glass, joinery etc. of drops and splashes & leaving premises clean and tidy with all labour, material, wastage, scaffolding with all protective measures, T&P, cartage etc all complete as per specification and direction of EIC. 600.00 Sqm 53.18 31908.00

25 Providing & applying two coats of super synthetic enamel painting on wood / steel / wall surface over a coat of wood/ steel/ wall primer for any description of works of approved shade, make Asian / Berger / ICI of fisrt quality including preparation of surface with Putty filling in cracks, holes etc wherever required, at any height / depth or any descripiton of works at all floors including all labour, material, T&P ,scaffolding all complete as per specification and direction of E.I.C. 100.00 Sqm 87.19 8719.00

26(a) Providing & fixing power coating Aluminium sliding window partially fixed and partially sliding of anodized Aluminium section in window shutter, tripple track Al. window with following specification for each window:- i) Outer Al. frame 100x44x2mm section, ii) Three track Al. channel 100x25mmx1.5mm approx, iii) Window Shutter of 12x25 mm appx. Size, for one leaf reflective glass sliding shutter other outer leaf mosquito SS mesh sliding shutter using bearing, handle, intermediate locking sections/channels with T-rubber beading and U-rubber gasket, screw aluminium angle section for fixure etc. clutch type handle (heavy duty) in each shutters, 4.8 mm thick Reflective glass in different colour of make Saint gobain / Modiguard/Triveni / TATA or as approved by EIC, including Stainless steel wire cloth , 0.36 mm nominal dia of wire and average width of apperture 1.40 mm fixed on Alluminium framed shutter tolerance as per manufacturer / IS specifications and member will be fitted as per drawing c/c horizontally and vertically both ways complete in all respects including material, labour, T&P, wastage and other required fixtures etc. for proper completion as per specification and direction of EIC. 10.00 Sqm 6862.00 68620.00

26(b) Providing and fixing of power coating aluminium ventilator made out of Aluminium section 63mm x 38mm x 1.50mm , ventilator outer frame with the provision of Louvers for glass strips, 5mm glass strips as required and rotating arrangement including all labour, material, fabrication charges, fixing charges, cartage T&P etc. all complete as per direction of EIC. 1.00 Sqm 7428.28 7428.28

27 Supplying and fixing in position 1.00MM thick Decorative laminate (Mica) type I of surface finish, coloured & designer pattern of (Sunmica/ Virgo/ Century/ Merino/ Royal touche/ Sundek/ Formica/ Tajpuria/ Heritage/ Greenlam or equivalent approved make and brand, fixed with recommended adhesive as per manufacturer's specification etc., for wooden work of ward robes, cubicles and partitions, wooden furniture and wall paneling. Area of ready composite wooden modular or wardrobe shutter shall be measured as length of composite modular multiplied or wardrobe shutter by its height in front elevation. including cost of all materials, labour, T&P etc all as specified and as directed by E.I.C. 15.00 Sqm 1020.00 15300.00

28 Providing and laying Double charge vitrified tile polished finish of size 600 x 600 mm in floor (thickness to be specified by the manufacturer) with water absorption less than 0.08% of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1 :4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily including cost of all materials, labour, T&P etc all as specified and as directed by E.I.C. 119.00 Sqm 1232.92 146717.48

29 Providing and fixing power coating aluminium grill of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment). 18.00 Kg 541.42 9745.56

30(a) Providing & laying glazed ceramic wall tiles of size 450x300 mm or larger size with 1st quality of Kajaria/Somany or approved make by EIC including provision of pencil tiles / decorative bands / border in wall tiles , skirting and dado in bedding layer 15mm av. Thickness in CM 1:3 (1cement, 3coarse sand) jointing with grey cement slurry @ 3.3kg per sqm, and grouting the joints with epoxy grout with matching shade and sealed finally with transparent epoxy coating, to avoid dirt on joints, including the cost of material, labour, T&P, curing, scaffolding all complete as per specification and direction of E.I.C. 20.00 Sqm 1075.41 21508.20

30(b) Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1 :4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., with all labour, material, T&P etc all complete as per direction of EIC. 6.00 Sqm 930.04 5580.24

31 Providing & fixing Granite slab 18mm-20mm thick of machine cut, pre-polished Black/ Cherry/Ruby Red or equivalent for flooring including cutting the stone as per required dimension (size) grinding and polishing, laid over 20mm thick av. cement screed base in 1:4 (1cement, 4coarse sand) , filling the joints with suitable filler and matching pigment including all labour, material, wastage T&P etc all complete as per specification and direction of EIC 12.00 Sqm 3800.82 45609.84

32 Providing , fabricating and fixing M.S. frames for doors, windows and ventilators, made out from MS square sections, M.S. angles and M.S. flats as per design, electrically welded and fixed in chowkhats with screws or treads of steps and R.C.C. balcony slabs in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 hard stone aggregate 12.5 mm nominal size) including labour, material & T&P grinding etc. all complete, as per drawing, specification and direction of EIC. 192.00 Kg 110.68 21250.56

33 Providing and fixing to door frame (MS/ Wooden) flush door shutter 30 mm thick (Single / double leaf) phenol formaldehyde bonded, core of block board construction with frame of hard wood all round lipping, commerical ply on both faces of shutters of Gee doors/Kit ply/ Swastik or other approved make, ISI mark as approved all complete as per drawings & specification also provisions for door fittings, making holes/ cutting for fixing fittings, making good including 4 nos for each leaf Stainless Steel butt hinges with necessary screws labour, material, T&P, cartage, wastage etc all complete as per direction of EIC. 10.00 Sqm 2686.90 26869.00

34 Supplying and fixing aluminium powder coating fitting with necessary fixtures all complete.

(a) Providing and fixing anodised aluminium sliding door bolt 250x16 mm of apporved make such as classic, shivalik, diamond or any other approved make including labour, material, T&P, etc all complete as per specification and direction of EIC. 8.00 Nos. 221.03 1768.24

(b) Providing and fixing Tower bolt anodised Aluminium 200mm long of apporved make such as classic, shivalik, diamond or any other approved make as per specification and direction of EIC. 4.00 Nos. 84.56 338.24

( c) Providing & fixing anodized Aluminium handle 125 mm grip length of apporved make with necessary screws, such as classic, shivalik, diamond or any other approved make including labour, material, T&P, etc all complete as per specification and direction of EIC. 8.00 Nos. 56.19 449.52

35 Providing & fixing anodized Aluminium door stopper double peg ISI marked of apporved make such as classic, shivalik, diamond or any other approved make including labour, material, T&P, etc all complete as per specification and direction of EIC. 3.00 Nos. 33.59 100.77

36 Providing & fixing heavy duty Aluminium extruded hudraulic door closure universal type sleek model, ISI marked of Amar/ Everite make or any other approved make including labour, material, T&P, etc all complete as per specification and direction of EIC. 3.00 Nos. 833.86 2501.58

37 Cutting holes up to 30x30 cm in walls or existing manholes built in brick wall / concrete wall for connecting new drains, making good to pipe and rendering, cutting out existing benching for forming branch channel ( ½ round or 3/4 section ) in cement concrete 1:2:4 ( 1 cement: 2 coarse sand: 4- 20mm graded stone aggregate) smooth finished and reforming benching as required including all labour, material, cutting, fixing, T&P etc. all complete as per specification and direction of EIC. 1.00 Nos. 353.51 353.51

38 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates, chain, Boll etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). 52.00 Kg 655.11 34065.72

Sanitary Fittings

39(a) Providing and fixing CPVC (Chlorinated Polyvinyl Chloride) concealed pipe 20mm having thermal stability for hot & cold water supply, including fittings like brass socket MTA & FTA, CPVC L band, Elbow, clamps, CPVC Sockets and plug with approved brand , cost of cutting chases and making good the same, testing of joints , labours, materials , wastages etc., all complete as per direction of Engineer in Charge. as directed by EIC. 20.00 RM 455.97 9119.40

39(b) Providing and fixing CPVC (Chlorinated Polyvinyl Chloride) concealed pipe 25mm having thermal stability for hot & cold water supply, including fittings like brass socket MTA & FTA, CPVC L band, Elbow, clamps, CPVC Sockets and plug with approved brand , cost of cutting chases and making good the same, testing of joints , labours, materials , wastages etc., all complete as per direction of Engineer in Charge. as directed by EIC. 15.00 RM 532.00 7980.00

40(a) Providing & fixing 100/ 110 mm dia PVC (SWR) pipe of approved make such as Supreme, Diplast , kishan or equivalent fixed to walls including necessary required fittings such as reducer , collars, MS clamps etc and adhesive for jointing the pipe for sewerage / rain down pipe fixed to wall/ laid in trenches including all labour, materials, tool & plants, wastage, scaffoldings, etc. all complete as per direction of EIC. 20.00 RM 320.09 6401.80

40(b) Providing & fixing 75 mm dia PVC (SWR) pipe of approved make such as Supreme, Diplast , kishan or equivalent fixed to walls including necessary required fittings such as reducer , collars, MS clamps etc and adhesive for jointing the pipe for sewerage / rain down pipe fixed to wall/ laid in trenches including all labour, materials, tool & plants, wastage, scaffoldings, etc. all complete as per direction of EIC. 5.00 RM 211.02 1055.10

41(a) Providing & fixing 100/ 110 mm dia PVC (SWR) bends of approved make such as Supreme, Diplast , kishan or equivalent including adhesive for jointing the pipe for sewerage / rain down pipe fixed to wall/ laid in trenches including all labour, materials, tool & plants, wastage, scaffoldings, etc. all complete as per direction of EIC. 5.00 Nos 127.52 637.60

41(b) Providing & fixing 75 mm dia PVC (SWR) bends of approved make such as Supreme, Diplast , kishan or equivalent including adhesive for jointing the pipe for sewerage / rain down pipe fixed to wall/ laid in trenches including all labour, materials, tool & plants, wastage, scaffoldings, etc. all complete as per direction of EIC. 2.00 Nos 89.82 179.64

42(a) Providing & fixing 100/ 110 mm dia PVC (SWR) Tee of approved make such as Supreme, Diplast , kishan or equivalent including adhesive for jointing the pipe for sewerage / rain down pipe fixed to wall/ laid in trenches including all labour, materials, tool & plants, wastage, scaffoldings, etc. all complete as per direction of EIC. 2.00 Nos 187.74 375.48

42(b) Providing & fixing 100/ 110 mm dia PVC (SWR) Tee with door of approved make such as Supreme, Diplast , kishan or equivalent including adhesive for jointing the pipe for sewerage / rain down pipe fixed to wall/ laid in trenches including all labour, materials, tool & plants, wastage, scaffoldings, etc. all complete as per direction of EIC. 2.00 Nos 198.59 397.18

42(c ) Providing & fixing 75 mm dia PVC (SWR) Tee of approved make such as Supreme, Diplast , kishan or equivalent including adhesive for jointing the pipe for sewerage / rain down pipe fixed to wall/ laid in trenches including all labour, materials, tool & plants, wastage, scaffoldings, etc. all complete as per direction of EIC. 2.00 Nos 122.39 244.78

43 Supplying and fixing to wall C.P. Soap tray of approved sample and quality, size, make Plumber, L&K, essess, Jaquar, Marc etc. or any other approved make including labour, T&P, material etc. complete as per specification & direction of E.I.C. 2.00 Nos 109.00 218.00

44 Providing and fixing of white glazed Vitreous china European type W.C. pan with white solid plastic seat and lid including 10 litre low level white P.V.C. flushing cistern of make Hindware, Cera, Nycer, Perryware or as approved make in all respect including flush pipe, labour, material, cartage T&P etc. all complete as required and as per specification and direction of EIC. 1.00 Nos 5526.17 5526.17

45 Providing and fixing 600 x 450 mm x 5.00 mm bevelled edge mirror with the holes on all the four corners of the glass of Modiguard/Saint Gobain/Atul or as approved by EIC, complete fixed with SS spacers or 6 mm thick asbestos sheet/ commercial hard board as required, fixed to wooden / PVC cleats with C.P. brass screws and washers all complete with labour, material, T&P etc and as per specification and direction of EIC. 3.00 Nos 1363.78 4091.34

46 Providing & fixing CP brass long body bib cock 15 mm dia of Prayag / L&K / Hindware / Parryware / Plumber or as approved by EIC including labour, material, T&P, soota, safeda etc including removal of existing bathroom fittings if requred all complete as per specification & direction of E.I.C. 4.00 Nos 677.63 2710.52

47 Providing & fixing CP brass angle valve 15 mm dia of Prayag / L&K / Hindware / Parryware / Plumber or as approved by EIC including labour, material, T&P, soota, safeda etc including removal of existing bathroom fittings if requred all complete as per specification & direction of E.I.C. 4.00 Nos 487.09 1948.36

48 Providing and fixing Chromium plated Towel rail 600 mm length or as approved by EIC, including all required accessories etc, complete with labour, material, T&P, wastage etc. as per specification and direction of EIC. 3.00 Nos 601.30 1803.90

49 Providing and fixing 600x120x5 mm CP glass shelf of make - L&K/ Plumber/ prayag/ Pearl or as approved by EIC, including all required accessories, C.P. brass brackets, 40 mm long screws, rawl plugs etc, complete with labour, material, T&P, wastage etc. as per specification and direction of EIC. 3.00 Nos 918.97 2756.91

50 Providing and fixing CP Towel ring minimum 200mm dia of approved make - L&K/ Plumber/ prayag/ Pearl or as approved by EIC, including all required accessories etc, complete with labour, material, T&P, wastage etc. as per specification and direction of EIC. 2.00 Nos 196.73 393.46

51 Providing and fixing CP brass Toilet paper holder of make - L&K/ Plumber/ prayag/ Pearl or as approved by EIC including required accessories all complete with labour, material, T&P, wastage etc as per specification and direction of EIC. 2.00 Nos 681.66 1363.32

52 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required including labour, material, cartage T&P etc. all complete as required and also removal of old basin and fittings as per specification and direction of EIC.

One urinal basin with 5 litre white P.V.C. automatic flushing cistern 1.00 Nos 5308.37 5308.37

53 Providing & fixing of PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm dia including all labour, materials, tool & plants, etc. all complete as per specification and direction of EIC. 3.00 Nos 209.00 627.00

54 Providing and fixing Chromium plated Grating Jali 100 / 125 mm dia with waste hole of appoved make all complete with labour, material, T&P etc and as per specification and direction of EIC. 3.00 Nos 63.00 189.00

55 Providing and fixing CP two way bib cock 15 mm dia of L&K / Hindware / Parryware / Plumber/ Prayag or as approved by EIC all complete with labour, material, T&P etc and as per specification and direction of EIC. 2.00 Nos 1787.00 3574.00

56 Providing and fixing CP Health Faucet of L&K / Hindware / Parryware / Plumber/ Prayag or as approved by EIC all complete with labour, material, T&P etc and as per specification and direction of EIC. 2.00 Nos 979.00 1958.00

57 Providing & fixing of 75MM PVC (SWR) Vent cowl including jointing with solvent, labour, materials, tool & plants, etc. all complete as per specification and direction of EIC. 2.00 Nos 51.00 102.00

58 Providing and fixing frosted glass Urinal partition of standard size 450X750X12mm of approved quality of modiguard fixed to wall with 3 No. heavy duty SS L-connector to hold the glass partition all complete with labour, material, T&P, wastage etc as per specification and direction of EIC. 1.00 Nos 3445.00 3445.00

59 Providing & fixing vitreous china white Cascade Table Top wash basin of size 470x 405x150 mm of approved make of Parryware including 15 mm C.P. claret pillar cock of Parryware with 450mm long PVC Connection of Prayag make, CP waste coupling 32mm dia of parryware make, CP bottle trap with coupler 32mmx25mm, CP angle valve of Parryware, etc all complete including removing of existing wash basin carefully of any size and deposite up to the distance of 1.00 KM as directed place by EIC or to Township civil maintenance store , cutting and making holes in granite platform all complete with all labour, material, T&P, wastage cartage etc all complete as per specification and direction of EIC. 2.00 Nos 7370.00 14740.00

60 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut Granite stone slab of colour black, Cherry/Ruby red and Area of slab upto 0.50 sqm. for wash basin platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1 :4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels - including all labour, material, wastage T&P etc all complete as per specification and direction of EIC 1.00 Sqm 4591.47 4591.47

61 Providing and fixing in position Tripple layer PVC water tank of 500 Liter Capacity with cover of make Polyplast / Sintex / Supreme or as approved by EIC with suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes including tank connector, PTMT ball cock 20mm of Prayag or equivalent make with epoxy coated aluminium rod & high density plastic ball fixed with CPVC / GI pipe including hoisted and fixed in position on roof, labour, material, cartage, fixing charges, T&P, wastage etc all complete as per specification and direction of EIC. 1.00 Nos 4664.83 4664.83

Part-B - Electrical works

1 Supply & making point wiring with FRLS PVC insulated multistrand copper wire of size 2X1.5 sq mm for light & fan light point with 1X1.5 sqmm. earth wire (for fan points only) (ISI mark), grade 1100V make-Havells/ Anchor/ National/ Polycab/ Gloster/Finolex/ Kei/ RR Kabel/ Cap cab/Rhein/Standards in appropriate size of PVC conduit(ISI marked), medium class, concealed in wall by cutting, plastering, matching existing painting/on wall surface with accessories such as bends, junction boxes, inspection boxes, sheet cover, socket, lock nut, brass bush,saddle, screw-gullies etc. (as required) with s&f of modular metal box concealed in wall/on wall surface with modular frame, plate for fixing of switch, socket , fan regulator etc., internal connection, testing complete in all respect as per EIC. (Note: Color code for Phase wire: Red/Yellow/Blue, Neutral: Black & Earth: Green) 0.00

a) Wiring for light point/ fan point/ exhaust fan point/ call bell point as required, make:- Anchor/Havells/L&T/Legrand/GM/ABB for making connection & testing complete in all respect or as per direction of EIC. 23.00 Nos. 1429.77 32884.71

b) Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as requir, make:- Anchor/Havells/L&T/Legrand/GM/ABB, on the same board (Item No. 1), making connection & testing complete in all respect as per direction of EIC. 4.00 Nos. 337.31 1349.24

c) Supplying and fixing 5/6 A modular switch & 3 pin 5/6 A modular socket outlet, on the existing modular plate & switch box make:- Anchor/Havells/L&T/Legrand/GM/ABB, on the same board (Item No. 1), making connection & testing complete in all respect as per direction of EIC. 4.00 Nos. 215.64 862.56

d) Supplying and fixing Bell push modular switch on the existing modular plate & switch box including connections but excluding modular plate etc. as required., make:- Anchor/Havells/L&T/Legrand/GM/ABB, by providing & concelaed MS switch box with modular plate, frame, screw etc. making connection with existing bell & testing complete in all respect. 1.00 Nos. 133.42 133.42

2 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, make:- Anchor/Havells/L&T/Legrand/GM/ABB, connections etc. as required, making connection & testing complete in all respect as per direction of EIC. 15.00 Nos. 552.94 8294.10

3 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. 3.00 Nos. 635.18 1905.54

4 Supplying & fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required. 7.00 Nos. 677.13 4739.91

5 Wiring for circuit/ submain wiring along with earth wire 2 X 2.5 sq. mm + 1 X 2.5 sq. mm sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. FRLS/HFFR PVC insulated copper conductor single core cable for loop earthing, concealed in wall by cutting, plastering, matching painting/on wall surface (as required) with all accessories such as bends, junction boxes with cover, inspection boxes, lock nut, MS saddle, gullies, screws etc. for submain wiring for rooms, power, boundary wall lighting etc. as per direction of EIC. (Note: Color code for Phase wire:Red/Yellow/Blue, Neutral: Black & Earth: Green) make-Havells/ Anchor/ National/ Polycab/ Gloster/Finolex/ Kei/ RR Kabel/ Cap cab/Rhein/ Standards 180.00 Meter 260.95 46971.00

6 Wiring for light/ power plug with 2X4 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No. 4 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable for loop earthing as required, concealed in wall by cutting, plastering, matching painting/on wall surface (as required) with all accessories such as bends, junction boxes with cover, inspection boxes, lock nut, MS saddle, gullies, screws etc. for submain wiring for rooms, power, boundary wall lighting etc. as per direction of EIC. (Note: Color code for Phase wire:Red/Yellow/Blue, Neutral: Black & Earth: Green) make-Havells/ Anchor/ National/ Polycab/ Gloster/Finolex/ Kei/ RR Kabel/ Cap cab/Rhein/ Standards 120.00 Meter 312.97 37556.40

7 Supplying, installation, Testing & Commissioning of LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -5 0C to 40 0C, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P.F.≥0.95, IP20, CRI >80, Flicker free (flicker should be below 5 %), life time (LED,Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6500°K 46 DELHI SCHEDULE OF RATES (E&M)-2025 (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating "18- 22 Watt" and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 <135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). White light/Cool Day light as per direction of EIC, make:- Orient/Crompton/Surya/ Havells/Philips/Wipro/Bajaj/Syska. 15.00 Nos. 615.87 9238.05

8 Supply and fixing of PVC batten/ angle holder including connection etc. on item no. 1 as required on wall, connection & testing, complete in all respect as per EIC. 7.00 Nos. 110.75 775.25

9 Supplying and fixing of 8 way (4 + 24), Double door surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs without MCCB and MCBs. Make: Legrand /Havells /L&T / Hager/ Schneider/ ABB/ Anchor/ Indoasian/ Eaton 1.00 No 6671.42 6671.42

10 Providing and fixing 100 A, 16 KA,TPMCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, Ics=100% Icu and Operational Voltage 690V etc. Make: Legrand /Havells /L&T / Hager/ Schneider/ ABB/ Anchor/ Indoasian/ Eaton 1.00 No 4281.76 4281.76

11 Supplying and fixing of 16 way, Double door, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required as per direction of EIC with following lsolator/ MCBs) (make:- Legrand /Havells /L&T /C&S Electric/ Hager/ Schneider/ABB/Anchor/Indoasian/Eaton) 2.00 No 2825.14 5650.28

12 Supplying and fixing of Isolator DP 63Amp (make:- Legrand /Havells /L&T /C&S Electric/ Hager/ Schneider/ABB/Anchor/Indoasian/Eaton) 4.00 No 477.43 1909.72

13 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (make:- Legrand /Havells /L&T /C&S Electric/ Hager/ Schneider/ABB/Anchor/Indoasian/Eaton): 24.00 No 239.14 5739.36

14 Supply, Laying & testing of sub main wiring with 2 X 16 sq.mm. FRLS PVC insulated multistrand copper wire make-Havells/ Anchor/ National/ Polycab/ Gloster/Finolex/ Kei/ RR Kabel/ Cap cab/Rhein/Standards, with 1X6 sqmm. earth wire in appropriate size of PVC conduit (ISI marked), medium class, concealed in wall by cutting, plastering, matching painting/on wall surface(as required) with all accessories such as bends, junction boxes with cover, inspection boxes, lock nut, MS saddle, gullies, screws etc. for submain wiring from Meter to SPN DB as per direction of EIC. (Note: Color code for Phase wire:Red/Yellow/Blue, Neutral: Black & Earth: Green) 50.00 Meter 698.10 34905.00

15 Supply & making stair case point wiring with FRLS PVC insulated multistrand copper wire of size 1.5 sq mm (ISI marked), make:- Havells/Anchor/National/Polycab/Gloster/ Finolex/Kei/RR Kabel/Cap cab in appropriate size of medium class, PVC conduit(ISI marked), concealed in wall by cutting, plastering, matching painting/on wall surface(as required) with all accessories such as bends, Junction boxes, junction box cover (laminated sheet), inpection boxes, socket, lock nut etc. with Supply & fixing of modular 6A, 2 Nos. 2 Way Switch, make:-Anchor/Havells/ L&T/Legrand/GM/ABB, by S&F of appropriate modular metal box with modular frame, plate, screw etc. by cutting, plastering, matching painting/on wall surface(as required) , making connection & testing complete in all respect as per direction of EIC. (Note: Color code for Phase wire:Red/Yellow/Blue, Neutral: Black & Earth: Green) 1.00 Nos. 1512.84 1512.84

16 Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. 11.00 Nos. 39.44 433.84

17 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. 6.00 Nos. 11.74 70.44

18 Supply, Laying and testing one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of 4CX50 sq. mm size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Make: Gloster//Havells/National cables/Polycab/TESCAB, as per standard code of practice as per direction of EIC. 250.00 Meter 952.17 238042.50

19 End Termination of 4CX50 sqmm.size 1100 V grade XLPE insulated and PVC sheathed steel armoured Aluminium conductor cable with brass compression gland, Al. lug etc. as per direction of EIC. 2.00 Nos. 410.30 820.60

20 Supply, making & testing of earth pit for earthing as per IS standard the job involves digging of pit up to 4.5 meter deep, supply & fixing of GI pipe 40mm dia (Internal) 4.5mtrs long, class B, make Jindal/TATA, wooden charcoal & salt (40 Kg each approx) suitable GI reducer CI funnel CI hinged Chamber cover with frame size 12" X 12" GI nipple etc and perforation from bottom, making of Earth Chamber and S&F of earth resistance identification marker with MS angular channel of thickness 5 mm of size 40 mmx40mm of length 450mm. the channel shall be grouted approximately 300 mm x 300mm x300mm depth of which 150 mm will be below the ground cement concrete pedestal work with 300 mm channel above the ground length just next to earthing pit as per direction of EIC. 2.00 Nos. 6425.57 12851.14

21 Supply, laying of 25mm x 5mm GI strip at 0.5 meter below ground as strip earth electrode including connection/terminating with GI nut-bolt-spring washers etc.complete as required(jointing shall be done by overlapping and with 2 sets of GI nut bolt & spring washer spaced at 50mm) as per instructions of engineer in charge. 80.00 Meter 134.25 10740.00

22 Supplying, Installation, Testing & Commissioning of 70 watt Flood Light, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI>70, under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle 30 deg-120deg as per the application and the project requirement., suitable tilt able fitting, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin) , SDCM(Standard Deviation Colour Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output. LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). make Crompton/Surya/Havells/Philips/Bajaj/Syska. 5.00 Nos. 2007.05 10035.25

23 Supply, Installation, Testing and Commissioning of ceiling fan 1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum) with BrushLess Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal ( Aluminum alloy) blades, 60-75 cm long or as required more long down rod with approved by Engineer-in-Charge as per requirement, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, suitable for operation with regulator for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Ceiling Fan compliant to IS 374:2019 fan Supply, earthing etc. Make: Usha/ Orient/ Bajaj/ Havells/ Crompton/ Atomberg, complete in all respect as per EIC. 4.00 Nos. 2261.29 9045.16

24 Supplying and fixing for 12 modules, GI box along with modular base & cover plate for modular switches and socket outlet in recess as required, complete with connections, testing and commissioning etc. or as per direction of EIC. 5.00 Nos. 515.19 2575.95

25 Supplying and fixing 5/6 A modular switch on the existing modular plate & switch box, connections, testing and commissioning etc. or as per direction of EIC. 50.00 Nos. 101.53 5076.50

26 Supplying and fixing 3 pin 5/6 A modular socket outlet on the existing modular plate & switch box, connections, testing and commissioning etc. or as per direction of EIC. 5.00 Nos. 114.11 570.55

Total (Civil +Electrical) 2661214.86

Contractor shall quote only numerical value of percentage either Above or Below in highlighted Cell on Total Above % 0.00

Sub Total 2661214.86

Add BOCW @ 1% on sub total 26612.15

Add GST @18% on sub total 479018.67

Total Quoted value including GST @18% 3166846.00

Annexure-D (Para 4.6.4)

Abstract Estimate

Name of Work : Term contract for Civil Maintenance works in Township at HAL Korwa. 2023-24. (For One years)

Time Required for

(a) Conclusion of Contract - 03 months

(b) Completion of works- 12 months

Sl. No. Particulars Amount in Rs. Reference

1 Term contract for civil maintennace works in Township for repair and maintenance of buildings, water supply lines, sanitary fittings, approach roads, floors, pavings etc. and allied civil works required for completion of work.

(a) Civil Works (Paer: A+Part: B) #REF! [Annexure-D-1]

Grand Total #REF!

Say Rs. #REF! Lakhs

Manager (Works) ATA

HINDUSTAN AERONAUTICS LIMITED

AVIONICS DIVISION, KORWA

POST OFFICE: HAL, TEH: AMETHI

DISTT: AMETHI (UP) - 22 74 12

Comparative price statement( as per estimated rate)

Name of Work : Term contract for Civil Maintenance works in Township at HAL Korwa.

C. A. No- HAL/KWD/Civil / 02 of 2015-16

PART 'A' MES ITEMS

S. No. Description of work & Sections/ sub heads of MES SSR- 2010 Sections of MES SSR- 2010 As per Estimate M/s Satyam Traders (1/2) M/s Ramesh Traders (1/2) Freak Rate

Weightage with respect to value of work (Approx) Weightage with respect to value of work (Approx) Rate above or below or at Par w.r.t MES-SSR-2010 rates (+) or (-) Rate as per weightage Rate above or below or at Par w.r.t MES-SSR-2010 rates (+) or (-) Rate as per weightage Rate above or below or at Par w.r.t MES-SSR-2010 rates (+) or (-) Rate as per weightage

13 White washing, colour washing and distempering 15 2.00 0.02 166.94 3.3388 167 3.34 150 3.00 208.675 125.205 4.1735

16 Water supply, plumbing, Drains and Sanitary appliances. 18 8.00 0.08 176.69 14.1352 198 15.84 190 15.20 220.8625 132.5175 17.669

19 Fire Hydrant, Fire detection and alarm system, Fire hydrant and Sprinkler system. 27 1.00 0.01 166.94 1.6694 181 1.81 160 1.60 208.675 125.205 2.08675

Rebate offered (in %age) if any 2.00

Status of Parties L-2 L-1 9.380172329

Sr. Asstt-C Engineer (CIVIL) MGR. (WORKS)

D.P. Vishwakarma A.K.Bajpai Satyendra K Maurya

HINDUSTAN AERONAUTICS LIMITED

AVIONICS DIVISION, KORWA

POST OFFICE: HAL, TEH: AMETHI

DISTT: AMETHI (UP) - 22 74 12

SCHEDULE - 'A' Part 'B'

Comparative price statement( as per estimated rate)

Name of Work : Term contract for Civil Maintenance works in Township at HAL Korwa.

C. A. No- HAL/KWD/Civil/21 of 2013-14

PART 'B' NON MES ITEMS

S.N Description of Items Qty. Unit As per Estimate M/s Satyam Traders (1/2) M/s Ramesh Traders (2/2) Freak Rate

Rate in figure ( Rs.) Rate in words ( Rs.) Amount in ( Rs.) Rate (In Rs.) Amount Rate (In Rs.) Amount

1 Supply and stacking of coarse sand such as Banda/ Chopan including transportation, loading, unloading, cartage, wastage, labour, material, T&P etc and stacking in side at proper place all complete as per specification and direction of EIC. 65.00 Cum 1970.00 #NAME? 128050.00 2600.00 169000.00 2300.00 149500.00 - 2462.50 1477.50 56.62514156 70.76139258 65.34090909

2 Supply and stacking of Ist class bricks class 'A' at directed place inside Factory or Township area including all labour, material, transportation, loading, unloading, wastage , T&P etc and stacking in side at proper place all complete as per specification and direction of EIC. 2000.00 Nos 8.00 #NAME? 16000.00 7.50 15000.00 7.00 14000.00 - 10.00 6.00

3 Supply and stacking of 12.5 mm graded stone aggregate of bharatkoop/ Dala quarry including transportation, loading, unloading, cartage, wastage, labour, material, T&P etc and stacking in side at proper place all complete as per specification and direction of EIC. 10.00 Cum 2408.00 #NAME? 24080.00 2400.00 24000.00 2500.00 25000.00 - 3010.00 1806.00

Sr. Asstt-C Engineer (CIVIL) MGR. (WORKS)

D.P. Vishwakarma A.K.Bajpai Satyendra K Maurya

HINDUSTAN AERONAUTICS LIMITED

AVIONICS DIVISION, KORWA

POST OFFICE: HAL, TEH: AMETHI

DISTT: AMETHI (UP) - 22 74 12

Comparative price statement( as per estimated rate)

Name of Work : Term contract for Civil Maintenance works in Township at HAL Korwa.

C. A. No- HAL/KWD/Civil / 02 of 2015-16

PART 'A' MES ITEMS

S. No. Description of work & Sections/ sub heads of MES SSR- 2010 Sections of MES SSR- 2010 As per Estimate M/s Satyam Traders (1/2) M/s Ramesh Traders (1/2) Freak Rate

Weightage with respect to value of work (Approx) Weightage with respect to value of work (Approx) Rate above or below or at Par w.r.t MES-SSR-2010 rates (+) or (-) Rate as per weightage Rate above or below or at Par w.r.t MES-SSR-2010 rates (+) or (-) Rate as per weightage Rate above or below or at Par w.r.t MES-SSR-2010 rates (+) or (-) Rate as per weightage

13 White washing, colour washing and distempering 15 2.00 0.02 154 3.08 167 3.34 165 3.30 192.5 115.5 3.85

16 Water supply, plumbing, Drains and Sanitary appliances. 18 8.00 0.08 163 13.04 198 15.84 200 16.00 203.75 122.25 16.3

19 Fire Hydrant, Fire detection and alarm system, Fire hydrant and Sprinkler system. 27 1.00 0.01 154 1.54 181 1.81 180 0.00 192.5 115.5 1.925

Rebate offered (in %age) if any 2.00

Total Amount (Part-B) 168130.00 208000.00 188500.00

Total Amount (Part A+Part B) 0.00 1268130.00 1557858.16 1373606.38

Status of Parties L-2 L-1

Sr. Asstt-C Engineer (CIVIL) MGR. (WORKS)

D.P. Vishwakarma A.K.Bajpai Satyendra K Maurya