REPAIR REPLACEMENT OF FLOORING ROOFING CEILING JOINERY AT BIKRAM ENCLAVE IFA NODE AND AOR OF AGE BRIIGE SOUTH UDHAMPUR

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing complete all as specified and as directed.

M&L for 25 mm thick PCC 1:2:4 type B0 using 12.5mm graded aggregate as in level course on floor etc complete all as specified and as directed.

M&L for Glazed Coloured Ceramic tiles in vertical surface 300x450x7mm thick incl laid over 10 mm thick screed bed in CM 1:4, set and joint in neat cement slurry and pointed in white or colour cement to match complete all as specified and as directed.

M&L for Non skid coloured tiles (square/rectengular) 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, including 15 mm thick screed bed in cement mortar 1:6 for laying floor finishes under floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface all as specified and as directed.

M&L for Non skid coloured tiles (square/rectengular) 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floor etc including 15 mm thick screed bed in cement mortar 1:6 for laying floor finishes under floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface all as specified and as directed.

All as per item No 05 above above but on vertical surfaces as in skirting complete all as specified and as directed.

Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the light shade of tiles and including 15 mm thick screed bedding/ backing layer in CM 1:4, complete all as specified and as directed.

Dismantling asbestos cement/galvalum sheet/CGI (corrugated , semi corrugated etc) sheets as in roof covering complete all as specified and as directed.

S&F 0.50 mm thick prepainted galvalume aluminium zinc coated GI based semi corrugated/profile steel sheeting of any colour, having tensile strength of 550MPA as in roof covering, wall cladding with self tapping screws or 'L' type of 'J' type or cranked hook bolts in lieu of screws as per manufactures instructions, all as specified and directed.

S&F 0.50 mm thick prepainted galvalume aluminium zinc coated GI based plain steel sheeting of any colour, having tensile strength of 550MPA as in roof covering, wall cladding with self tapping screws or 'L' type of 'J' type or cranked hook bolts in lieu of screws as per manufactures instructions, all as specified and directed.

M&L for rolled section as in main and cross beams, purlins, rafters ,posts where connected to common rafter and running rails,eves board framing work, tank staging work etc conforming to Fe- 410-w complete all as specified. Ref HQ CEUZ as per span of site reqmt.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulaton boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed.

AC designer composite ceiling board 4mm thick in 600mmx600mm panel confirming to IS-14682 type-B category-3 including GI frame work with size of grid 605x605mm for seemless ceiling comprising of GI perimeter, holdfast & suspenders and all accessories complete all as specified and as directed by Engineer-in-charge/ GE.

Granite stone 18-20mm thick (table rubbed and polished) in window cills, cooking plateforms and the like not less than 1 sqm (in one piece0, laid over 15mm thick layer of cement mortar 1:3 after roughning of existing concrete surface and applying a layer of neat cement slurry @ 3kg/sqm including pointing in white cement 1:2 using marble dust with admixture of pigments to match with shade of stone, including demolition of stone slabs and tiles of any description or thickness in floors etc. laid, bedded and pointed in any mortar complete all as specified and as directed.

Demolition of cement concrete in ground floors and providing not exc. 15cm thickness (below or above ground level) complete all as specified and directed by Engr-in-Charge/GE.

M&L for hardcore of broken stone of guage n.exc 63mm deposited spread and levelled in layer n.exc 15cm thick watered and well rammed to true surfaces complete all as specified and as directed.

M&L for 75 mm thick plain cement concrete type D-2 (1:4:8) (40 mm graded stone aggregates) as in sub base complete all as specified and directed.

M&L for sand cushion 20 to 30mm thick for fixing of inter locking tiles complete all as specified and directed by Engr-in-Charge/GE.

M&L for Machine pressed precast concrete interlocking paver block (glossy finish)of approved shape and size confirming to IS 15658-2006 of 60mm thickness with grey cement and no pigment, M-35 Grade of approved colour and design complete all as specified and directed by Engr-in-Charge/GE.

S&F Vitrified Dura stone tiles of size n.exc. 0.36sqm of 10mm thick as in floors and over & including 15mm thick screed bed or bedding layer in cement mortar 1:4, inckuding jointed with neat cement slurry and pointed in coloured cement to match the surfaces of tiles, complete all as specified and directed.

M&L for machine cut kota stone slab flooring 18-20mm thick over cement screed base 15mm thick in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

Demolition of brick work or stone masonry built in cement mortar including all quoins arches, pillar etc but excluding ashlar facing , dressed stone work and precast concrete articles complete all as specified and as directed.

M&l for PCC type D2(1:4:8) using 40mm graded crushed aggregate as mass conc and filling of foundation complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified and as directed.

M & L Rendering 15mm thick on brick or concrete surfaces of walls in CM (1:4) including finishing the surfaces even and smooth without using extra cement as in manholes, septic tank, filter bed out let drain etc all as directed by Engineer-in-Charge/GE.

M&L for providing 40 mm thick cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregates as in floor and finished even and smooth without using extra cement complete all as specified and as directed.

M&L for providing 50 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection laid in alternate bays (n exc 2 Sqm each ) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and as directed.

M&L for cement concrete 1:2:4 type B-0 using 12.50 mm graded crushed stone aggregates as in cills, lintels, upto 1.50 metre clear span, copings, benching, bed plates etc. and in similar works including weathering, slightly rounded or chamfered angles and throating and necessary form works complete all as specified and as directed.

M&L for cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in surface channels and drains complete all as specified and as directed.

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

M&L for 15 mm thick rendering on fair faces of brick or stone/concrete surfaces in cement mortar 1:4 and finished surface even and smooth without using extra cement complete with water proofing complete all as specified and as directed.

M&L for 15 mm thick rendering on fair faces of brick /concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 10 mm thick rendering on fair faces of brick /concrete surfaces as in ceiling in cement mortar 1:3 and finished even and smooth without using extra cement complete all as specified and as directed.

M&L for applying one coat of oil bond distemper on walls including preparation and complete removal of existing treatment from old decorated plastered or unplastered surfaces of walls, tint and shade as approved by Engr-in-charge, complete all as specified and as directed.

M&L for applying two coat of oil bond distemper on walls after preparation of newly plastered surfaces complete all as specified and as directed.

M&L for applying two coats of white washing on ceiling including preparation of newly plastered surfaces complete all as specified and as directed.

M&L for applying two coats of cement base paint after preparation of newly plastered surfaces complete all as specified and as directed.

M&L for applying one coats of cement base paint after preparation of old plastered surfaces complete all as specified and as directed.

M&L for applying one coat of white wash on old decorated plastered surfaces of ceiling after preparation of surfaces complete all as specified and as directed.

M&L for applying one coat of white wash on old decorated plastered surfaces of walls after preparation of surfaces complete all as specified and as directed.

M&L for applying one coat of wall putty(1 mm thick) on walls to give uniform surface complete all as specified and directed.

M&L for preparation of wooden surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

M & L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) pipes single socketed of wall thickness 2.20mm in any length with rubber ring joints fixed to walls with MS bracket of size 25mmx3mm with necessary nuts, bolts & washer duly painted with black paint complete all as specified and directed.

S&F 110 mm bore PVC (SWR) socket/bends/shoes any radius complete all as specified and as directed.

S&F pillar taps, cast copper alloy with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe of bore 15 mm complete all as specified and as directed.

S&F in repair stop valve, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore complete all as specified and as directed.

S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S&F waste fittings brass chromium plated for glazed ware sink, basins,etc with long screwed shank and fly nuts,flenges end bedded in red lead cement and other end fixed 32mm dia complete all as specified and as directed.

S&F in rep stainless steel grating doom75mm/100mm square/round complete all as specified and as directed.

S&F in repair 32/40 mm dia PVC waste pipe for WHB/sink complete all as specified and as directed.

S&F in repair flush pipe of polyethylene of low or high density or PVC, 32mm dia, for low level cistern complete all as specified and directed.

S&F in repair 32 mm waste coupling of PTMT ( half or full threaded) (Min weight 60 gms) all as specified and directed.

S&F in repair 40 mm waste coupling of PTMT ( half or full threaded) (Min weight 60 gms) all as specified and directed.

S&F in repairs CP soap dish any type fixed to wall with brass screws all as specified and directed.

M&L for cast Iron floor trap with dia of outlet 75mm with CI grating including jointing to waste pipe fixed in cement concrete PCC 1:2:4 type B-1 complete all as specified and as directed.

S & F 15mm steel tubing galvanized, medium grade with all fittings, laid in floors or fixed to walls including taking down old pipe complete all as specified and as directed.

S & F 20mm steel tubing galvanized, medium grade with all fittings, laid in floors or fixed to walls including taking down old pipe complete all as specified and as directed.

S&F in repair 15mm dia stop cock fancy type chromium plated concealed type, complete all as specified and as directed.

S&F in repair bib tap 15mm bore fancy type chromium plated complete all as specified and as directed.

Bib cock 15 mm bore long body chromium plated in repair complete all as specified and as directed.

S&F vitreous China wash basin, white, flat back, size 550x400mm excluding tap, chain, plug but including for fixing of taps, waste fitting, brackets and cutting for and pinning in ends of brackets but fixed in repair complete all as specified and as directed.

S&F Brass chromium plated shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union of bore 15 mm, as in repairs all as specified and as directed.

S&F tubular towel rail, 20mm dia, D type, 60cm long between flanges aluminium anodized, fixed with rawl plugs complete all as specified and as directed.

S&F float valve assembly for flushing cistern with inlet valve float and handle including brackets, fixed in repairs complete all as specified and directed.

Supply and fixing in repairs vitreous china squatting pan, Orrisa pattern of size 580mmx440mmwhite with integral foot rests excluding flushihng cistertn and flush pipe complete all as specified and as directed.

Supply and fix as in repairs vitreous china wash down water closet pan (pedestal pattern) white plastic water closet seat & back with flat bottom and cover, mild steel chromium plated or aluminium anodised high device (excluding flushing cistern and flush pipe) but including fixing bolt and necessary connection with existing pipes complete all as specified and directed.

S&F cast iron 'P' or 'S' trap for bore of pipe 100mm complete all as specified and as directed.

S&F 10 ltr capacity PVC low level flushing cistern symphonic action type white with inlet valve float and handle including brackets, fixed in repairs complete all as specified and directed.

S&F in repairs of sinks with draining board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste pipe including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

Chromium plated toilet paper holder in repair complete all as specified and directed. Make : Jaquar Cat Part No ACN 1153N and equivalent in CERA/PARRYWARE.

Health faucet ABS body with wall hook and 1 mtr chrome plated PVC hose pipe in repair complete all as specified and directed. Make : CERA Cat Part No F8030103 and equivalent

S & F toilet paper holder brass chromium plated with flap all as specified and directed. Make : Hilife/ESS/Czar

S&F in repair 1mm thik plate rack made of stainless steel, 600x750x250 mm (Wt not less than 7.5 Kg) including brackets and embedded in brick wall all as specified and as per manufacturers instruction.

S&F in repairs rotational moulded polyethylene water storage tanks three layered (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of capacity 500 liters including all accessories complete all as specified and as directed.

S&F in repairs for 1000 Litres rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I and PTMT ball valve 20mm dia and including taking down of old tank and removing from site complete all as specified and as directed.

Supply and fixing glass shelf 600mm long including CP supporting clamps, screws etc, complete all as specified and as directed by Engr-in-Charge. Make : Jaquar Cat part No AKP-35771P or equivalent as per specifed in PS.

Water proofing treatment to surfaces of walls/concrete slabs damaged due to moisture and efflorescence including sunken areas of bathrooms/toilets, in balconies by applying acrylic polymer modified cementitious high performance coating or treatment all as per manufacturer's instructions, complete all as specified and as directed. Make : SmartCare Damp Block 2K/Dr. Fixit

M& L PCC 1: 5 : 10 type E2 using 40 mm graded brick aggregate as in filling under sunken floors etc complete all as specified and as directed.

S&F Door seal for wooden/Aluminium/steel door shutter complete all as specified and as directed by Engr-in-charge. Make : Beeta or equilent

S&F for harrison, rails drapery rod powdered coated including brackets and necessary fitting as directed by Engg-in-charge/GE.

S&F in reapair aluminum door closer ( aluminum extruded section) hydraullically regulated , designation No 3 , universal type , suitable for door shutters of 851mm to 1000 in width and of weight 61 to 80 kg complete all as specified and as directed.

M&L for rolled mild steel work of angle iron as in frames of doors & Cup Board etc conforming to grade Fe 410-W (Gde E-250) quality 'A" complete all as specified and as directed.

S&F 19mm thick ISI, termite proof, chemically well pressed, prelaminated particle board exterior grade prelaminated, one side with decorative choice lamination and other side balancing white lamination fixed with screws to frame work for kitchen cabinetstand & cup boards etc includimg 6mm th teak wood beading all around complete all as specified and directed .

S&F in repair 100 mm long stainless steel hasp and staple complete all as specified and as directed.

S&F in repairs stainless steel handles cast type, anodised, 150mm size complete all as specified and as directed.

S&F stainless steel cold rolled butt hinges medium weight 75 mm long, including fixing to pressed steel door frame if required complete all as specified and as directed.