REPAIRS / REPLACEMENT OF EXTERNAL WATER SUPPLY RISING MAINS/DISTRIBUTIONS GI/DI LINES, CONTROL VALVE AND ALLIED E/M MISC WORKSAT ACC AND S AREA UNDER GE (SOUTH) AHMEDNAGAR

Amount

Excavation in trenches not exc 1.50 m wide and not exc 1.50 m deep for foundation, laying of pipe, cables or for shafts, wells cesspits,man holes, sluice valves etc not exc 10 Sqm on plan and n exc 1.5m in depth and getting out in soft / loose soil complete all as specified and as directed.

Returning, filling, in soil including spreading, levelling, watering and well ramming in layers n.exc. 25cm thick complete all as specified and as directed.

Removing excavated soil to distance not exc. 50 m and depositing where directed at a level not exc. 1.5 m above the starting point etc complete all as specified and as directed.

M&L for cutting the existing bituminous road / PCC Hard Standing upto 75cm in depth, 60cm in width and getting out excavated materials, making good the damaged portion after laying of pipes by returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick and PCC 1:2:4 type B1 using 20mm graded stone aggregate upto 30cm depth from top of the road all as specified and directed.

Repairs / rectification of leakages of 80mm bore dia CI/DI Main joint with new lead wool/Run lead/Rubber gasket joint/mechanical joint ,caulking/ nutbolt tight etc. including burning out old leadjoint/dismantling rubber gasket/ nut bolts and including any type of excavation/returning filling (any type of soil strata) etc. and making good all disturbed area to match the surrounding all as specified and as directed.

All as per serial item No 5 here-in-before but 100mm bore dia.

All as per serial item No 5 here-in-before but 150mm bore dia.

All as per serial item No 5 here-in-before but 200mm bore dia.

All as per serial item No 5 here-in-before but 250mm bore dia.

All as per serial item No 5 here-in-before but 300mm bore dia.

All as per serial item No 5 here-in-before but 600mm bore dia.

Taking up or down choked CI/DI water mains 80 mm bore including all fittings with spigot and socket ends including burning out joints, recovering lead and proper cleaning by internal brushing, removing chalkings and refixing / relaying in place, jointing, pressure testing and washing out complete all as specified and as directed. Note : Run lead joint/rubber gasket joint will be measured and paid seperately

All as per serial item No 12 here-in-before but for 100 mm bore.

All as per serial item No 12 here-in-before but for 150 mm bore.

All as per serial item No 12 here-in-before but for 200 mm bore.

All as per serial item No 12 here-in-before but for 250 mm bore.

All as per serial item No 12 here-in-before but for 300 mm bore.

M&L for DN 80 mm bore ductile Iron pipe with spigot and socket ends, centrifugally cast, class DI-K9, with finishing layer of bituminous coating as per Annex C of IS 8329, including rubber gasket joint, conforming to IS: 8329 : 2000, ISI marked, in any length, laid in trenches, pressure testing, washing out complete all as specified and as directed.

All as per serial item No 18 here-in-before but for 100 mm bore.

All as per serial item No 18 here-in-before but for 150 mm bore.

All as per serial item No 18 here-in-before but for 200 mm bore.

All as per serial item No 18 here-in-before but for 250 mm bore.

All as per serial item No 18 here-in-before but for 300 mm bore.

M&L for styrene butadiene rubber gasket (IS : 5382) joint, suitable for 80 mm bore spigot and socket ends DI Pipes, Class K9, including pressure testing complete all as specified and as directed.

All as per serial item No 24 here-in-before but for 100 mm bore DI pipe.

All as per serial item No 24 here-in-before but for 150 mm bore DI pipe.

All as per serial item No 24 here-in-before but for 200 mm bore DI pipe.

All as per serial item No 24 here-in-before but for 250 mm bore DI pipe.

All as per serial item No 24 here-in-before but for 300 mm bore DI pipe.

M&L for CI / DI fittings and specials such as Bends (any type, radius and angle), Tapers any type (straight, bend, increasing, decreasing or double socket etc.), Tee pieces single branch, "Y" junction, double branch, cross (all sockets or socket and spigot), Collars, Caps, Plugs, Connecting pieces one end flanged and other end socketed or spigot ends or all socketed / spigot ends etc, suitable upto 150 mm bore pipe complete all as specified and as directed.

All as per serial item No 30 here-in-before but for 200 to 600 mm bore pipe.

M&L for run lead joints suitable for 100mm bore dia pipe, spigot and socket ends complete and pressure testing all as specified and as directed.

All as per serial item No 32 here-in-before but for 150 mm bore pipe.

All as per serial item No 32 here-in-before but for 200 mm bore pipe.

All as per serial item No 32 here-in-before but for 250 mm bore pipe.

All as per serial item No 32 here-in-before but for 300 mm bore pipe.

M&L for taking out 80mm bore leakaged sluice valve, repair/replaceing grafite Grease gland rope, nuts, bolts, washers etc.all as specified and as directed.

All as per serial item No 37 here-in-before but 100 mm bore.

All as per serial item No 37 here-in-before but 150 mm bore.

All as per serial item No 37 here-in-before but 200 mm bore.

All as per serial item No 37 here-in-before but 250 mm bore.

All as per serial item No 37 here-in-before but 300 mm bore.

M&L for taking out sluice valves of size 80 mm bore, re-facing, re-grinding, repacking stuffing box of sluice valve spindle of any make any type, including taking apart and reassembling, re-fixing, replacing nuts, bolts, washers complete all as specified and as directed.

All as per serial item No 43 here-in-before but 100 mm bore.

All as per serial item No 43 here-in-before but 150 mm bore.

All as per serial item No 43 here-in-before but 200 mm bore.

All as per serial item No 43 here-in-before but 250 mm bore.

All as per serial item No 43 here-in-before but 300 mm bore.

M&L for sluice valve of size 80 mm bore, cast iron, long body, both ends flanged as per IS-14846 and drilled with stainless steel spindle iron wheel head and as per pressure rating PN 1.6, Class I, ISI Marked alongwith nuts, bolts, washers , gaskets etc. including dismantling and taking out old unserviceable sluice valve from valve chamber / trenches complete all as specified and as directed.

All as per serial item No 49 here-in-before but 100 mm bore.

All as per serial item No 49 here-in-before but 150 mm bore.

All as per serial item No 49 here-in-before but 200 mm bore.

S & F Rubber Lined Nov Return Valve B-02 (Ball Type) for 80 mm bore size , cast iron body, flanged end, including neophrene ball and by pass arrangement complete including suitable flanges, nuts, bolts, washers and rubbber gaskets including dismantling and taking down old unserviceable non return valve all as specified and as directed.

All as per serial item No 53 here-in-before but 100 mm bore.

All as per serial item No 53 here-in-before but 150 mm bore.

All as per serial item No 53 here-in-before but 200 mm bore.

S&F cast iron body ball type foot valve flanged B-05(N) of 80mm bore size, including suitable flanges, nuts, bolts, washers and rubbber gaskets including dismantling and taking down old unserviceable foot valve all as specified & as directed.

All as per serial item No 57 here-in-before but 100 mm size.

All as per serial item No 57 here-in-before but 150 mm size.

All as per serial item No 57 here-in-before but 200 mm size.

M&L for mechanical joint having 2 Nos CI / DI Sockets, 1 No CI / DI Collar and 2 Nos styrene butadiene rubber gaskets for 80 mm bore pipe alongwith nuts, bolts, washers , gaskets etc. including cutting CI / DI pipe and reducing to required length for insertion in position of mechanical joint complete all as specified and directed.

All as per serial item No 61 here-in-before but for 100 mm bore pipe.

All as per serial item No 61 here-in-before but for 150 mm bore pipe.

All as per serial item No 61 here-in-before but for 200 mm bore pipe.

All as per serial item No 61 here-in-before but for 250 mm bore pipe.

All as per serial item No 61 here-in-before but for 300 mm bore pipe.

M&L for construction of valve pit/chamber of Internal dimensions 2600 mm x 2600 mm x 3300 mm, using PCC 1:4:8, type D-2, using 40mm graded stone aggregates for foundation, 23 cm thick, brick wall built in cement mortar (1:4) ,15 mm thick rendering all around the brick work in cement mortar (1:6), 75 mm thick PCC (1:2:4) type B-1 using 20mm graded stone aggregates in coping including necessary form work, 3coats of white wash on rendered surfaces and on coping, 2 mm thick mild steel top sheet cover with frame made out of 40x40x6 mm angle iron, locking arrangement, including painting of steel surface with two coats of synthetic enamel paint over a coat of red oxide primer including demolition of existing valve chamber and clearing the debris complete all as specified and as directed.

All as per serial item No 67 here-in-before but internal dimensions 1300 mm x 1300 mm x 900 mm

All as per serial item No 67 here-in-before but internal dimensions 1100 mm x 1100 mm x 900 mm

S&F of Mild steel bolts purpose made with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut exc 30cm long Diameter of neck in n exc 12 mm complete all as specified and directed.

NOTES for item Nos 01 to 70 :- (i) The contractor/his supervisor will report the office on 09.00 clock morning every day including any holidays to collect the complaints from JE and will render the completion within 12 hours failing which 500 Rupees per day will be charged as an penalty & the same will be recovered from contractor. (ii). The contractor and his supervisor will provide the mobile number so that they can be communicated about the complaints, the SMS will be sent on those mobile and will be treated as an official complaints. The contractor will render the completion in writing to the department within 12 hours hours failing which 500 Rupees per day charged as penalty .

m/s shivam tools and equipment