PROVN OF CERTAIN REVENUE WORK AND SPECIAL REPAIR TO GARBAGE BINS IN 151 BASE HOSP UNDER GE GUWAHATI

Amount

M&L Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc complete, drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe 410W Gde E-1250 quality A including dismantling of old steel work such as doors, gates etc complete all as specified and directed.

S&F 105X60mm size pressed steel door frames of doors with one or more rebates including necessary fixing lugs, hinges lock strike plate, etc complete all as specified and directed.

M&L 18/19 mm thick Particles board medium Density, flat pressed, single layer type or three layer type with BWR type adhesive fixed with Screws to timber frame work complete all as specified and directed. .

S & F anodised aluminium frame for doors, windows, ventilators with one or more rebates including jointing cleat for fixing etc, (minimum thickness of powder coating 50 micron) complete all as specified and as directed.

S & F anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc, complete all as specified

S&F Prelaminated particle board 8/9 mm, exterior grade, prelaminated both side with decorative choice lamination fixed with screw to timber/aluminium frame work with suitable beading/snap grid all as directed by Engr-in-Charge complete all as specified and directed. .

S & F 5 mm ( + 0.50 mm) thick Sheet glass, ordinary quality and glazing with oil putty or in rubber beading with one way film in squares exceeding 0.5 Sq. M in each pane complete all as directed by Engr-in-Charge complete all as specified and directed. .

S&F 40mm width Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed.

S & F 50 mm width Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

S & F 75 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed. .

S & F 125 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S/F 40 mm dia , cupboard knobs fixed with nut , screw and washer of brass , bright finish complete all as specified and directed.

M/L for 25 mm thick shutter of Prelaminated particle board, interior grade,prelaminated both side with decorative choice lamination,fixed with continuous hinges to timber frame work

S&F as in repairs Mortice lock, vertical type, size100 mm four lever complete all as specified and directed.

S&F angle iron/ Flat iron work as in hold fast etc.conforming to Fe-290 Gde-165 for fixing aluminium frame work with screws to existing floor including demolition of floor/wall complete all as specified and as directed.

M&L Precast re-inforced concrete Slab 1:2:4 type B1 (20 mm graded stone aggregate) set in cement Mortar 1:4 complete all as specified and directed.

M&L for brick work with sub class `B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 as in half brick thick work complete all as specified and directed.

M&L for form work to soffits of suspended slab, sush as roof slabs, floor slabs, landings, chajjas and similar work not exceeding 200 mm thick, horizontal or sloping for flat and rough finished surface of concrete complete all as specified and directed.

M&L for MS TMT bars 8 mm dia and over out to length, bent to shape required binding with and incl MS annealed wire not less than 0.90mm diacomplete all as specified and directed. .

M&L Rendering 15 mm thick on fair faces of brick work or concrete sur-faces in cement mortar 1:6 finishing the surface even and smooth (without using extra cement) complete all as specified and directed.

M&L Rendering 15 mm thick on other than fair faces of brick work or concrete sur-faces in cement mortar 1:6 finishing the surface even and smooth (without using extra cement) complete all as specified and directed.

M&L Rendering 5 mm thick on concrete surfaces as in ceiling in cement mortar 1:3 for finishing the surface even and smooth (without using extra cement) incl taking down plaster complete all as specified and directed.

M&L for prepration of new plastered surfaces of wall and applying two coat of oil emulsion distemper over a coat of wall care putty for smooth surface finishes complete all as specified and directed.

M&L for prepration of old plastered surfaces of wall and applying a coat of oil emulsion distemper over a coat of wall care putty for for smooth surface finishes complete all as specified and directed.

M&L for prepration of new plastered surfaces of ceiling and applying two coat of oil emulsion distemper complete all as specified and directed.

Preparation of new or previously untreated steel surfaces of any description, not exc 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

Cutting channels, grooves or rebates with or without reinforcements exc 15 cm but n.exc 30 cm girth and trimming surfaces complete all as specified and directed.

M & L for providing, precast cement concrete 1:2:4 using 20 mm graded aggregate in window or door cills, lintels, bressummers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling), corbels, brackets, etc.(of any section indicated), with plain fair faces, including chamfers weatherings, throating etc. and setting in mortar complete with joints to match complete all as specified and directed.

Cutting holes in concrete/ brick wall built in cement mortar for inserting holdfasts/ lugss and making good the dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-I as required, depth of embedded portion of hold fast or lugs into the wall n. exc half brick thick all as specified

S & F Framed work such as grills, gratings, etc, with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars; ladders; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

M&L preparing new steel surface of any description not otherwise description for over 10 cm width or grith and applying two coats of synthetic enamel paint over a coat of red oxide primer complte all as specified and directed.

Dismantling plain or corrugated steel sheeting of any gauge thickness including Nainital or similar pattern roof covering.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated/semi corrugated steel sheet 0.50mm thick of any colour having tensile strength 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing) and removing debris and rubbish off the premises complete all as specified and directed.

S&F Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer in CM 1:6 over 100 mm th Cement concrete type C- 2, 1:3:6 (40mm graded aggregate) complete all as specified and directed.

S&F Coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 15mm thick screed bed or bedding layer in CM 1:4 over complete all as specified and directed

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) but cement concrete of any description and in any position complete all as specified and directed

M&L Providing, cement concrete B1 1:2:4 in lintels upto 1.5m clear span, cills, steps; copings, bed plates etc including necessary form work complete all as directed

M&L Cement concrete Type D-2 1:4:8 in foundations, filling and mass concrete complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed

S&F welded steel wire fabric etc fixed to steel members weighing not exc 4Kg /Sqm complete all as specified and directed

S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built incement morter complete all as specified and directed

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

M&L for rendering 10 mm thick in cement mortar (1:4) on fair faces of brick work or concrete surface complete all as specified and directed.

M&L for preparing newly plastered surface of wall applying two coat of exterior emulsion over a coat of primer after preparation of surface including necessary scafolding etc complete all as specified and as directed.

M&L preparing new steel surface of any description not otherwise described for over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) as plinth protection/paving finish even and smooth without using extra cement.complete all as specified and directed.

BALEN DEWAN