Repair to floor, plaster, joinery including days to day maintenance, plumbing, water supply fittings, sanitary fittings, glass panes, water tank in Md/OTM accn at Ridge, Roulki, Balidan Stambh, Defence Colony etc under GE Satwari

Amount

Demolition of brick work built in cement mortar or cement lime mortar incl all quoins, arches pillars etc and removing unserviceable material exc 100 mtr as specified.

Demolition of cement concrete (unreinforced) ground floor to 2nd floors and pavings n exc 15 cm thickness (below or above ground level ) and removing unserviceable material exc 100 mtr as specified.

Demolition of reinforced cement concrete of any discription ground to 4th floors and removing unserviceable material exc 100 mtr as specified.

Dismantling floor, hearth or wall tiling, terrazo, including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

Dismantling of ceiling board(Fibre,pulp,,any type of insulation etc) or insulation board / slabs/any thickness including cover fillets

Dismantling timber scantlings 40 sq. cm and over in section, in any position ( framed work) complete all as specified.

Ditto as item No 06 in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section framed Work) all as specified.

Taking down CI/PVC pipes 100 mm dia incl all fittings like bend, branch pieces, connectors, heel rest bend etc all as specified and directed.

Taking down CI/PVC pipes 75 mm dia incl all fittings like bend, branch pieces, connectors, heel rest bend etc all as specified and directed.

Taking down shutters of any description exc 1.00 Sqm and not exc 2.00 Sqm each and removing from the site all as specified & directed.

Taking down shutters of any description exc 2.00 Sqm each and removing from the site all as specified & directed.

Taking down chowkats or frames with shutter (with out taking off shutter from the frame) n exc 1.5 sqm each incl cutting holes for taking out hold fast or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) all as specified and directed By Engr-in-charge.

Taking down chowkats or frames with shutter (with out taking off shutter from the frame) exc 1.5 sqm & n. exe 4 sqm each incl cutting holes for taking out hold fast or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) all as specified and directed By Engr-in-charge.

Taking down cement plaster of any description on brick or stone walls or from concrete surface incl raking out joints, hacking for key, scrubbing down with water etc all as specified,and removing unserviceable material outside the premises.

M&L Brass Face/Spindel in repair for CP/Brass Bib tap, Angle cock, Pillar cock, wall mixer, WHB mixer, etc

Supplying and fixing GI Elbow in repair for GI pipe 15 mm bore complete all as specified and as directed by Engineer-In-Charge

Supplying and fixing GI socket in repair for GI pipe 15 mm bore complete all as specified and as directed by Engineer-In-Charge

Supplying and fixing GI Tee in repair for GI pipe 15 mm bore complete all as specified and as directed by Engineer-In-Charge

Supplying and fixing GI union in repair for GI pipe 15 mm bore complete all as specified and as directed by Engineer-In-Charge

M&L for Repair to low level flushing cistern any type and change the following item as well as requred:-

(a) Flush handle/ knob of cistern

(b) Suitable PVC float valve for cistern

(c) Syphon assembly

(d) PVC Long bend 32 mm dia

Repairs to steel windows of any size and description using welding machine where necessary complete all as per Engr-In-Charge.

Repair/ easing of wooden door any type, glazed or panelled, by triming the side of door shutter where rubing with chowkhat, unscrew the hinges screws and lift the door and fix with screds, titening of wire mesh etc all as per Engr-In-Charge.

Material and labour for repairing aluminium shutters ( Door/ Window) including refixing, tightening and making good with using rubber/beads and others small fixtures/fittings if required and making serviceable all as specified and directed by Engr-in-charge.

Material and labour for repairing Aluminium door locks ( Sample approved by Engr-in-charge)

S & F pressed steel frames made of size 1.25mm thick MS steel for door with one or more rebates incl lugs, hold fast, lock strike plate etc complete of size 105 x 60mm including one coat of red oxide primer and PCC 1:3:6 as in back fill to chowkats all as spfd. Make:- Shivam Steel, Jammu

S & F pressed steel frames made of size 1.25mm thick MS steel for door with one or more rebates incl lugs, hold fast, lock strike plate etc complete of size 125 x 60mm including one coat of red oxide primer and PCC 1:3:6 as in back fill to chowkats all as spfd. Make:- Shivam Steel, Jammu

M&L 35 mm thick 2nd class hard wood, Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply. The size of rail and stile as per IS : 1003 (Part I), complete all as specified.

S&F 35mm thick 2nd class hard wood glazed and skelton shutters open rebated and prepared to receive gauge etc without sash bar but with lock rail fitted with cut and mitered beads complete all as specified.

M&L Flush shutters, 30 mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified. Note:- Sampel approved by Engr-in-Charge or GE.

S&F Soild PVC door frame of size 50mm x 47mm made out of 5 mm plain coloured PVC sheet, reinforced with MS square tube supplying and fixing in opening as per specification and drawing.

S&F Factory made solid panel PVC door shutter 30 mm thick ( style ) consisting of frame work made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour P.V.C‘ C’ channel having a PVC sheet strip 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail lock rail and bottom rail on either side and as gap inserts for top rail; and bottom rail paneling of plain, colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rail with suitable PVC sheets beading and jointed together with solvent cement S&F in frame at site as per specification.

S&F in repair 25mm outer dia stainless steel thickness 20 gauge with stainless steel brackets near to ends with stainless steel finials for 25mm dia drapery rod at both ends. The drapery rod shall be projecting 150 mm outer side from the clear opening of doors/windows. ( Including necessary fittings),complete all as specified and as directed by Engineer-In-Charge.

Pressed steel cup board frame of MS sheet 1.25 mm thick size of frame 60 x 40 mm with rebate of 20 mm wide and 12 mm deep including PCC 1:2:4 as in filling to back of chowkats including butt hinges 100 mm long. Piano hinges measured separately.

S&F continuous (piano) hinges, heavy duty mild steel, bright finish or electrogalvanised sutable for 19mm thick shutter and fixed, complete all as specified. ( ISI Marked)

Material & labour for 18/19 mm thick MDF board as in shutters/shelves etc exterior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed to frame work with leaping (15 mm thick three side and 20mm thick leaping hinge side) around the shutter and fix with screws to etc complete all as specified and directed.

S & F butt hinges of mild steel cold rolled medium weight of size 100mm as specified.

S&F Aluminium anodised, barrel tower bolts size 200 mm of extruded section and fixed complete all as specified. (ISI Marked)

S&F Aluminium handles, cast type, anodised Size-150mm, anodised section and fixed complete all as specified. (ISI Marked)

Aluminium handle cast type anodized of size 100 mm complete all as specified

S & F Steel locking bolts with mild steel electrogalvanised plate and bright bolt not less than 10 mm dia. 100 mm Size.

S&F Aluminium alloy, anodised, sliding door bolt Size- 250 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed cpmplete all as specified.

S&F Floor door stopper of aluminium alloy body size 140 mm (Overall length of cover plate) and tongue, anodised, with hard drawn steel spring, fixed in floor. (ISI Marked)

S&F in repair magnet door catcher for door shutter complete all as specified.

S&F in repair magnet door catcher for cupboard shutters complete all as specified. (ISI marked)

S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified. ( ISI Marked)

S&F in repair Magic eye ( eye door viewer) complete all as specified and directed by Engr-in-Charge.

S&F in repair aluminium extruded section body, door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed.

S & F in repair mild steel helical/ordinary rat tail rod pattern door spring 300mm including roller and roller plate complete fixed with welding all as specified.

S&F in repair 25mm outer power coated aluminium decorative drapery rod of thickness 1.25 mm with aluminium powder coated brackets near to ends with finials for 25mm dia drapery rod at both ends. The drapery rod shall be projecting 150 mm outer side from the clesr opening of doors/windows. ( Including necessary fittings) Note:- Sample approved by Engr-in-Charge/ GE.

M&L Aluminum Power coated, sliding windows three track with mosquito proofing with style 44.4x44.5x2mm thick including 4.00 mm thick coloured/tinted/frosted glass panes including all necessary fittings and fixtures complete all as per Engr-in-charge.

Aluminium anodised powder coated window/ventilator shutter, section of size 44.45 x 44.45mm made out of 1.6mm thick aluminium sheet/section including necessary jointing cleats, glazing clips, rubber packing, suitable handle 1 No's in each shutter, tower bolt, hinges 110mm long ,anodised aluminium snap beading screws, complete all as specified. Note: Sheet glass to be fitted will be measured and paid separately.

Aluminum anodized powder coated frame of size 101.60 x 44.45 made out of 1.60mm thick aluminum section fixed to floor/wall with plugs and screws complete all as specified and directed

S&F in repair Brass Mortice lock with brass handles and fittings , 4 lever vertical type, size 65 mm including complete accessories complete all as specified.

Supply and fixing in repair double action door spring hydraulically regulated (heavy duty) made of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass other parts made of mild steel heavy duty. (ISI Marked)

S & F Box type Steel windows/ventilators comprised of tubular frame and shutters made out of 1.25mm thick MS steel tube factory made with double side shutters wire gauged shutter & glass glazed shutter ( wire and glass panes shall be measured and paid separately ) with side hung shutters with steel handle and steel peg stay dovetailed ot welded incl 2 Nos tower bolts 150mm long for each leaf and 10 mm square bar grills at spacing as shown on drg welded to F I frame work , incl other fittings ,hinges ,handles tarred hold fasts PCC blocks etc. all as shown on drg No CEPZ /TD-354/09 sheet 1/3 to 3/3 complete

S&F Mild steel works of flat iron, square bar, round bars etc. as in framed work such as grills, guard bars, gratings etc incl bending, cutting and welding as necessary of confirming to Gde Fe 310-0 all as specified.

Hacking out old broken glass (any thickness,size quality or description) from any types of wooden/steel/alum (up to 4th storey) frames or stone concrete or brick surrounds glazed with putty or fixed with beads.

S&F 3 mm thick sheet glass ordinary quality glazing with steel pins,oil putty to steel windows and, beads nails etc to wooden surfaces as in square exc 0.50 sqm in each pane, all as specified.

S&F 3 mm thick figured glass, pin head type and glazing with oil putty in square n.exc 0.5 sqm in each pane.

M&L for PCC 1:2:4 type B 1 using (20 mm graded aggregate) as in blocks for hold fasts, benching, coping apex stones, bed plates and the like including weathering slightly rounded or chamfered angles and throating all as specified and direct. Note: Form work required for these items included in the unit rate of this item.

S&F Galvanised mild steel wire cloth, 0.46mm nominal dia of wire and average width of aperture 1.81 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified.

S&F in repair Galvanised mild steel wire cloth, 0.46mm nominal dia of wire and average width of aperture 1.81 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified.

S&F in repair Central Hole Basin Mixer without Popup Waste System with 450mm Long Braided Hoses Also available all as per directed and specified. Make :- Jaquar, Cat no CQT-23167B or equivalent in kohler/ Artize.

S&F in repair Pillar cock long neck with aerator 15mm dia cast copper alloy fancy type complete all as specified. Make:- Essco, Cat No-SQT-508KN or equivalent in kohler/ Jaquar.

S&F in repair Bib Cock cast copper alloy, chromium plated fency type long body with wall flange & aerator Quarter turn fix with iron pipe, 15 mm bore complete all as specified. Make :-Essco, Cat No:-SQT-512KN or equivalent in kohler/ Artize/ Jaquar.

S&F in repair angle cock with wall flange , cast copper alloy, chromium plated fency type screwed for 15 mm iron pipe, complete all as specified. Make:-Essco, Cat No- SQT-526KN or equivalent in kohler/ Artize/ Jaquar.

S&F in repair Concealed Stop Cock Heavy Body Casted Cap 15 mm complete all as specified. Make:- Essco, Cat No:- SQT-514EKN or equivalent in kohler/ Artize/ Jaquar.

S&F in repair Bib Cock with nozzle, cast copper alloy, chromium plated fency type Quarter turn fix with iron pipe, 15 mm bore complete all as specified. Make :-Essco, Cat No:-SQT-512KN or equivalent in kohler/ Artize/ Jaquar.

S&F in repair Sink Cock with swinging casted spout with aerator. Make:- Essco, Cat No-SQT-522KN or equivalent in kohler/ Artize/ Jaquar.

S&F in repair CP Bib taps, fancy type,long body , cast copper alloy with capstan head, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified complete all as specified. Make:- Jainko, Essco ,

S&F in repair angle valve with wall flange , cast copper alloy, chromium plated fency type screwed for 15 mm iron pipe, complete all as specified.

S&F in repair CP Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified. Make:- Jainko, Essco .

S&F in repair CP Urinal Valve Auto Closing System with Built-in Control Cock & Wall Flange. Make:- Jaquar, Cat Part No- PRS-CHR-077 or equivalent in kohler/ Artize/ Jaquar.

S&F in repair CP Urinal Spreader complete all as specified. Make:- Cera, Cat No:- F8070201 or equivalent in kohler/ Artize/ Jaquar.

S&F in repair Cromium plated, single towel rail 600mm long complete all as specified. Make:- Essco, Cat No-AEC-1111 or equivalent in kohler/ Artize/ Jaquar.

S&F in repair Cromium plated, towel ring square, complete all as specified. Make:- Essco, Cat No- AEC-1121 or equivalent in kohler/ Artize/ Jaquar.

S&F in repair stainless steel Shop dish with PU foam complete all as specified. Make:- Essco, Cat No:- AEC-1131 or equivalent in kohler/ Artize/ Jaquar.

S&F in repair stainless steel Tumbler holder complete all as specified. Make:- Essco, Cat No:- AEC-1141 or equivalent in kohler/ Artize/ Jaquar.

S&F in repair cromium plated toilet roll holder, complete all as specified. Make:- Essco, Cat No- AEC-1151 or equivalent in kohler/ Artize/ Jaquar.

S&F in repair Glass shelf 600mm long, complete all as specified. Make:- Jaquar, Cat No- AKP-CHR-35771P or equivalent in kohler/ Artize/ Jaquar.

S&F in repair Corner Glass Shelf (with Bracket) as per directed by Engr-in-charge. Make:- Jaquar, Cat No- ACN-1173 or equivalent in kohler/ Artize/ Jaquar.

S&F in repair cromium plated waste coupling 32mm full thread with 80mm height, complete all as specified. Make :- Jaquar, Cat No- ALD-CHR-705 or equivalent in kohler/ Artize/ Jaquar.

S&F in repair cromium plated bottle trap (with internal partition) 32mm size with 250mm & 190mm long wall connection pipe & wall flange., complete all as specified. Make :- Jaquar, Cat No- ALD-CHR-769L250X190 or equivalent in kohler/ Artize/ Jaquar.

S&F in repair 450mm Long Braided Hose with Two 15mm Nuts & Rubber Washers (Both Side) Without Nipple (Suitable for Geysers) complete all as specified. Make :- Jaquar, Cat No- ALD-CHR-805B or equivalent in kohler/ Artize/ Jaquar.

S&F in repair 450mm Long Braided Hose with M10X1 Nipple, 15mm Nut, O-Ring & Rubber Washer (Suitable for Basin Mixers) complete all as specified. Make :- Jaquar, Cat No- ALD-CHR-803AB or equivalent in kohler/ Artize/ Jaquar.

S&F in repair PVC connection 15 mm x 450 mm including brass check nut at both ends screwed for iron pipe of 15 mm bore. Make:- Prayag, Cat No:- 323 or equivalent in kohler/ Artize/ Jaquar.

S&F in repair Overhead Shower 80 mm dia Round Shape Single Flow (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning System including shower arm 240 mm long (Light Weight) Round Shape for Wall Mounted Showers with Wall Flange complete. ( For Shower Make:- Essco, Cat No-EOS-541RB.) & ( For Shower Arm Make :- Essco, Cat No- ALE- 536A) or equivalent in kohler/ Artize/ Jaquar.

S&F in repair Jet Spray (Stainless Steel) with 1.5 meter Tube complete all as specified. Make:- Prayag, Cat No- BEA-17 or equivalent in kohler/ Artize/ Jaquar.

S&F in repair Urinal (CAPRIANA in white colour, ) half stall with complete accessories Set, cp waste cuppling, waste pipe, sprader etc. Size: 375 x 390 x 590 mm complete all as specified. Make:- Cera, Cat No- S4020112 or equivalent in Jaquar/ Hindware.

S&F in repair Urinal (CASEY in white colour) bowel with complete accessories Set, cp waste cuppling, waste pipe, sprader etc. Size: 315 x 265 x 440 mm complete all as specified. Make:- Cera, Cat No- S4020101 or equivalent in Jaquar/ Hindware.

S&F in repair under counter basin white colour with fixing accessories set, size: 560 x 470, Oval shape, including CP cuppling and PVC waste pipe complete all as specified. Make :- Cera, Cat No- S2030104 or equivalent in Jaquar/ Hindware.

S&F in repair Wall Hung Basin with Fixing Accessories Set, Size : 550 x 400 including cuppling and pvc waste pipe complete all as specified. Make :- Cera, Cat No- S2040119 or equivalent in Jaquar/ Hindware.

S&F in repair full pedestal for WHB complete all as specified. Make :- Cera, Cat No- S2090113 or equivalent in Jaquar/ Hindware.

S&F in repair Corner Wall Hung Basin with Fixing Accessories Set, Size : 400 x 400 including cuppling and pvc waste pipe complete all as specified. Make :- Cera, Cat No- S2040119 or equivalent in Jaquar/ Hindware.

S&F in repair Wall Hung Cistern with Drainage L-Bend Pipe with Gasket & Installation Kit (Suitable for EWC/ IWC), complete all as specified. Make:- Prayag , Cera Cat No- B1010107 ( CABRINA) or equivalent in Jaquar/ Hindware.

Supply and fixing in repair PVC Seat cover for EWC pan (White ) of standardd quality including hinges bolt etc all as directed by Engr-In-Carge.Make: CERA Cat No- B1510105 or equivalent in Jaquar/ Hindware.

M&L 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over 15 mm thick CM 1:4 as directed by Engr-in-charge.

M&L Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified.

M&L for Reinforced cement concrete 1:2:4 (nominal mix) as in slabs supported on walls, beams and coloumns and the like slab laid in slops all as specified and directed.

S&f mild steel deformed bars 10 mm dia and over cut to length bent to shape required including cranking hooking ends & binding with and including MS wire (annealed) not ness than 0.9 mm dia etc. all as spfd.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified.

Vitreous china wash down water closet pan ( pedestal pattern ) white complete including ‘P’ or ‘S’ trap , white seat cover with flat bottom and MS CP hinging device and fixing of flushing cistern, brackets, flushing pipe etc, complete, all as specified fixed in repairs . Make:- Cera, Cat Part No- S1051103 or equivalent in Jaquar/ Hindware.

S&F in repair WC Orissa pattern white with integral foot rest 585x 445 mm including L bend, & PCC bedding in 1:2:4 and making good disturbed floor connecting to trap and flush pipe compete all as specified.(Rate of including in taking out and removal of old WC seat unhygienic condition) Make:- Cera/Jaquar/ Hindware.

S&F in repair Bib tap long body of PTMT any colour high pressure screwed for iron pipe and fixed. Make:- Paryag, Cat No:- 124-C or equivalent in Polytuf/ Jindal.

S&F in repair PTMT Grating Round 100 mm dia complete all as specified. Make:- Prayag. Cat No- 111 or equivalent in Polytuf/ Jindal.

S&F in repair PTMT Grating Round ( with waste hole) 125 mm dia complete all as specified. Make:- Prayag. Cat No- 113 or equivalent in Polytuf/ Jindal.

S&F in repair PTMT Shelf 450 mm long complete all as specified. Make:- Prayag. Cat No- 191 or equivalent in Polytuf/ Jindal.

S&F in repair PTMT Corner Shelf 200 mm long complete all as specified. Make:- Prayag. Cat No- 192 or equivalent in Polytuf/ Jindal.

S&F in repair PTMT Soap Dish/Oval, complete all as specified. Make:- Prayag. Cat No- 195 or equivalent in Polytuf/ Jindal.

S&F in repair PTMT Towel rail, 450 mm long, complete all as specified. Make:- Prayag. Cat No- 199 or equivalent in Polytuf/ Jindal.

S&F in repair PTMT Shower rose Round size- 75 mm dia with 225 mm long shower arm with flange, complete all as specified. Make:- Prayag. Cat No- 199 or equivalent in Polytuf/ Jindal.

Supply and fixing in repair PVC Waste pipe 32mm bore 1150mm length complete .Make: Prayag Cat No 329 or equivalent in Polytuf/ Jindal.

Supply and fixing in repair PVC Waste pipe 40 mm bore 800mm length complete .Make: Prayag Cat No- 3451 or equivalent in Polytuf/ Jindal.

Supply and fixing in repair PVC Waste pipe 25 mm bore 800 mm length complete .Make: Prayag , Polytuf , or equivalent ,

S & F in repair White rotational moulded polythylene water storage tank ( White Colour) with float valve, plastic lid cover, triple layered, cylindrical vertical with closed top hoisted and fixed in position of capacity 1000 ltrs incl making connections complete all as specified.

S&F in repair White rotational moulded polyethylene water storage tanks (white colour) with float valve, plastic lid cover, triple layered, cylindrical vertical with closed top hoisted and fixed in position of capacity 500 ltr incl making connection completed all as specified.

Disconnecting of water tank of 500 ltr to 1000 ltrcapacity ( Upto 2nd Storey of Building ) setting aside (or lowering if required) cleaning and removing all scale and dirt etc etc from tanks and from mouths of pipes etc. scrapping silt, scale, fungus with wire brush from water tanks and removing all scale and dirt etc from water tanks and removing water to a distance 50 meters from the building, cleaning the tank with fresh water, cleaning the mouth oh pipe, refixing all G.I fittings and float valve, making functional all out going G.I connections from tanks and float valves and marking the date of cleaning with white paint on tanks for, cleaning and hoisting if required reconnecting and re-fixing in position complete all as specified and as directed.

Providing cement concrete type B-1 1:2:4 (using 20 mm graded stone aggregate ) in Base of PVC tank upto 4 storey roof all as specified and direcred by Engr. In Charge

S&F in repair Stop valves, (sutable for 25mm bore pipe) cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified. (ISI Marked)

S&F in repair Stop valves, (sutable for 20 mm bore pipe) cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified. (ISI Marked)

Supply and fixing in repair float valves high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe of bore 20mm. ( including necessary fittings)(Min weight 210gm).

Taking down GI tubing of 15 mm dia and connection and incl cleaning for refixing or removal all as spfd.

Taking down GI tubing of 20 mm dia and connection and incl cleaning for refixing or removel all as spfd.

Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 15mm, complete all as specified and as directed.

Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 20 mm, complete all as specified and as directed.

Taking down CPVC pipe 20 mm/25 mm dia and connection and incl cleaning for refixing or removel all as specified.

S&F 20 mm outer dia CPVC pipe with all fittings (Brass Elbow, Brass reduser, Brass Tee, Female Brass Threaded Adaptor( FBTA), Male Brass Threaded Adaptor ( MBTA), Tank Adaptor, UNION, BALL VALVE, CPVC Flange and ect) and fixed complete wall and ceiling or laid in floors.

S&F 25 mm outer dia CPVC pipe with all fittings (Brass Elbow, Brass reduser, Brass Tee, Female Brass Threaded Adaptor( FBTA), Male Brass Threaded Adaptor ( MBTA), Tank Adaptor, UNION, BALL VALVE, CPVC Flange and ect) and fixed complete wall and ceiling or laid in floors.

S&F in repair stainless steel gratings of outer frame dia 100 mm openable type incl all necessary fittings such as hinges including embeding in tiles with white cement. Make:- Prayag, Cat No- FT-03, or FT-04 or equivalent in Essco, Cera.

S&F PVC (SWR) Type-B pipes single socketed, 110 mm dia, in any length with rubber ring joints, laid in trenches or in floors complete all as specified.

S&F upto 4th storeyof building PVC (SWR) Type-B pipes single socketed, 110 mm dia, in any length with rubber ring joints, on wall complete all as specified.

S&F PVC (SWR) Type-B pipes single socketed, 75mm dia, in any length with rubber ring joints, laid in trenches or in floors complete all as specified.

S&F upto 4th storeyof building PVC (SWR) Type-B pipes single socketed, 75mm dia, in any length with rubber ring joints, on wall complete all as specified.

Taking down and refixing 75 mm & 100 mm bore PVC Pipes upto 2nd storey building with necessary clamps , screws , in every 1.00 mtr C/C distance on wall and any vertical position all as specified & directed.

S&F PVC (SWR) Type-B bends, 75 mm any radius complete all as specified.

S&F PVC (SWR) Type-B bends, 110 mm any radius complete all as specified.

S&F PVC (SWR) Type-B junction single, 75mm (Single T) equal or unequal complete all as specified. Make:- Astral, Supreme, Finolex.

S&F PVC (SWR) Type-B junction single, 110 mm (Single T) equal or unequal complete all as specified.

S&F PVC (SWR) Type-B floor trap, (75mm diameater for outlet in mm), plain with grating including jointing with solvent cement.

S&F PVC (SWR) Type-B multi floor trap with grating including jointing with solvent cement (75mm diameater for outlet in mm) complete all as specified.

PVC (SWR) Type-B gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified.

PVC (SWR) Type-B vent cowl 75 mm dia complete all as specified.

PVC (SWR) Type-B reducers 110 mm dia complete all as specified.

S & F in repairs Single 'Y' Tee, 75 mm UPVC (SWR) Type B complete all as specified.

S & F in repairs Single 'Y' Tee, 100 mm PVC (SWR) Type B complete all as specified.

Taking down cement plaster and decayed concrete of any description from sunken portion , repair with 15mm thick rendering on fair face of concrete surfaces in CM 1:3 and neru finish , with water proofing compound ( As per manufacturer detail ) including junction portion, making proper slope towards out side, finished even and smooth with PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate). (Note: Water proofing admixture measured and paid seprately)

(a) Applying 1st course of bitumenous primer conforming to IS-3384 @ 0.4 Kg/Sqm over the plastered surface as in WC Sunken portion . (b) Applying 2nd coarse of a coat of blown type bitumen of grade 85/25 heating to a working temperature of 180° C and applied @ 1.2 Kg/Sqm. (c) Applying 3rd course of APP (Atactic Polypropylene) modified polymeric membrane 2 mm thick weight not less than 3.0 Kilogram/Square Metre with 160 Grams/Square Metre non woven polyster made at centre core reinforced laid with 75 mm side overlap and 100 mm overlap. The membrane has to be laid with LPG torch and overlap sealed and finished neat. (d) Applying 4th course of a coat of bonding material with blown type bitumen of grade 85/25 heating to a working temperature of 180° C and applied @ 1.2 Kg/Sqm.

M&L Cement concrete type E-2, 1:5:10 ( 40 mm graded agregate) in Sunkan ( Up to 4th floor) filling and mass concrete complete all as specified and directed by Emgr-in-charge.

M&L 40 mm dia G I tubing heavy grade galvanised laid over floors as a spout pipe in sunken floors all as specified.

M&L Brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified.

Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:4, complete, but except brick, i.e. using serviceable bricks obtained from here-in-before all as specified and as directed.

M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified.

M & L Glazed ceramic digital tiles in vertical surface 300x200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface over 15mm thick screed in C:M 1:4 all as specified. Make : Somany,Kajaria,( sample as approved & kept in GE's sample room)

M & L Glazed digital ceramic tiles in vertical surface 450x300x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface over 10 mm thick CM 1:4 all as specified. Make : Somany,Kajaria, ( sample as approved & kept in GE's sample room)

M&L Non - skid digital, anti scratch, anti fungus, Ceramic joint less colored tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and set in neat cement slurry and pointed with coloured/white cement to match the surface over and including 15mm thick screed bed in C:M 1:4. Make : Somany,Kajaria,Orient ( sample as approved & kept in GE's sample room)

M&L Non - skid digital, anti scratch, anti fungus, Ceramic joint less colored tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in skirting dado , etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and set in neat cement slurry and pointed with coloured/white cement to match the surface over and including 10 mm thick backing coat in C:M 1:4. Make : Somany,Kajaria,Orient ( sample as approved & kept in GE's sample room)

M& L Virified digital ceramic (double charged) any shade tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incuding 15 mm thick screed bed in C:M 1:4. Make : Somany,Kajaria, ( sample as approved & kept in GE's sample room)

M& L Virified digital ceramic any shade tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in scarting dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat in C:M 1:4. Make : Somany,Kajaria, ( sample as approved & kept in GE's sample room)

M&L 25 mm thick PCC 1:2:4 type B-1 using 20 mm stone aggregated as in floor finished rough.

Supply and fixing GI snap grid frame work (Grid size 605cm x 605cm) for false ceiling consisting of main runner 'T' of size 24mm x 32mm and 0.3mm thick , Secondary runner 'T' of size 24mmx25mm and 0.3mm thick,GI angle 24mmx24mm and 0.4mm thick,Bottom exposed capping of width 24 mm of all T-sections shall be of 0.25mm thick PPGI, hot dipped galvanised steel with zink coating not less than 120gm / Sqm ,ceiling grid system duly suspended by 2 mm dia GI wire hanging from existing purlins /roof slab with butterfly clips including Gypsum ceiling tiles of size 595 x 595 x 7 mm laminated with 0.07 mm thick polyvinyl film on the face side and 10 micron metalized polyester film on the back side fixed on GI snap grid complete all as specified and directed by Engr-in- Chage. Make: Gyproc,Lafarg Boral Gypsum India,V Board.

Dismantling asbestos cement (Corrugated or semi-corrugated) sheets in roof covering complete all as specified and directed.

M&L in repair Asbestos cement two pieces adjustable plain wing ridge 6mm thick fixed with GI `L` or 'J' type hook or cranked bolts all as spd. Make:- Charmeenar/ Everest

M&L in repair 6mm thick asbestos cement corrugated sheets in roofs, walls etc fixed with G.I. 'L' or 'J' type hooks or cranked bolts complete all as specified & directed. Make:- Charmeenar/Everest

M&L second class hard wood timber scantling framed clean sawn fixed in repair to replace old and decayed timber (including piecing, scarfing etc, of old and new timber if required), complete all as specified and as directed.

S&F Steel windows/ventilator 'Z' section, double shutter ( wire gauge and glazed shutter) with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified

S&F in repair sink cuppling complete all as specified. Make :- Prayag, Cat No- SA-03 or equivalent in NIRALI, Jaynaa.

S&F sinks with drainage board made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm x 203mm & bowl size 405mm x 354mm x 203mm complete with waste coupling & PVC waste pipe complete all as specified and directed by Engineer-in-charge. Make:- Prayag, Cat No- 1239D & equivalent in Nirali, Jayana.

Supply and fixing in repair sinks made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 460mm x 405mm x 203 mm bowl size 405mm x 354mm x 203mm complete with waste coupling & PVC waste pipe complete all as specified and directed by Engineer-in-charge. Make: Prayag, Cat No- 1216D. & equivalent in Nirali, Jayana.

S & F Kitchen stainless steel plate rack made out of 1 mm thick sheet and having partions as per sample. The over all size 600mm x 900mm x 250mm fixed with steel fastners or steel screw complete. Make:- Prayag, Cat No- P-336 and equivalent in Jayana.

Supply and fixing in repair roller blinds with control unit made of high strength reinforced plastic,clutch with wrap spring design,operated by endless beaded chain including idler mounted on bracket by plastic lock center shaft and aluminium exluded rail powder coated including braces ,anodised tube of high strength alloy roller tube,bottom rail (aluminium extruded tube and 4.5 mm thick plaster beads on 2.2 mm thick polyster chord operating chain,colour and pattern as per Engr- in-charge /GE.. Make Vista or equivalent in Tesla

M&L complete removal of the existing roof treatment,( upto 4 storey building) taken out membrane etc, including grabbing up of tree roots, roughing and preparation surfaces of old concrete floor by picking, scrubbing down with steel brushes, sweeping clean and washing down with water to remove dust etc all as specified and directed by Engr. in Charge .

PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) with wire netting of 0.60 mm dia and size of mesh 12 mm x 12 mm laid between the two layers finished even and smoothes in roof padding ( upto 2nd storey building) all as specified and as directed Note:- The wire mesh shall be measured and paid separately under the respective item below.

Supply only 25 mm size, wire netting of galvanized iron chicken mesh, 0.60 mm dia complete all as specified and directed.

M&L for 20 mm thick plaster in cm 1:3 finished fair and even on RCC roof slab ( upto 4th storey building) incl mixing of IWPC ( Note :- IWPC shall be measured and paid for separately)

M&L complete for the following Roof treatment complete all as specified (a)Applying 1st course of bitumenous primer @ 0.4 kg/sqm conforming to IS-3384 over plastered surface . (b)Applying 2nd course of a coat of bonding material with blown type bitumen of grade 85/25 heating to working temperature of 180® C and applied @ 1.2 kg/sqm. (c)Applying 3rd course of APP (Atactic Polypropylene) modified polymeric 3mm thick weight not less than 3.6 kg/sqm with 160 Grams/sqm non woven polyster made at center core reinforced laid with 75 mm side overlap and 100 mm overlap. The membrane has to be laid with LPG torch and overlap sealed and finished neat . (d)(iv) Applying course of two coats of aluminium paint over the APP membrane all as specified. All joints and change in direction shall be covered with cement mortar 1:3 mixed with SBR latex @ 200 ml/bag of cement and curved before laying membrane MAKE-IWL/Pidilite .

M&L for 5 mm thick plaster in cm 1:4 finished fair and even on RCC roof slab ( upto 2nd storey building) incl mixing of IWPC ( Note :- IWPC shall be measured and paid for separately)

Supply only liquid water proofing compound, all as specified and as directed.

M&L for rendering 15 mm thick in CM 1:6 on other than fair face of brick work/ stone wall surfaces finished even and smooth with out using extra cement all as specified.

M&L for rendering 15 mm thick in CM 1:4 on fair face of brick work/ stone wall surfaces finished even and smooth without using extra cement all as specified. ( incl all necessary scaffolding, lifting arrangement for three story building on external surfaces).

Material and labour for rendering 10 mm thick in CM (1:3) as in ceiling finished even and smooth w/o using extra cement.

Material and labour for repairing of concrete surfaces such as correction of chajjas,upward facia,downward facias,ceiling and similar items with plain cement concret 1:2:4 type B-0 or rendering 10mm thick in CM 1:3 includind dubbing coat without using extra cement finished even and fair including necessory formwork and scaffolding complete all as specified and directed.(Up to 4th storey bldg)

M&L for applying two coat of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description having width/girth exceeding 10 cm including preparation and rubbing with sand paper to make surface even and smooth complete all as specified

M&L for applying one coat of synthetic enamel paint on old painted steel surfaces of any description having width/girth exceeding 10 cm including preparation and rubbing with sand paper to make surface even and smooth and apply putty and primer where requred complete all as specified

M&L for applying two coat of synthetic enamel paint on new wooden surfaces of any description over a coat of pink primer having width/girth exceeding 10 cm complete all as specified including preparation and necessary filling by chalk putty as and where requered to make surface even and smooth.

M&L for applying one coat of synthetic enamel paint on old painted wood surfaces of any description having width/girth exceeding 10 cm complete all as specified including preparation and where requered to make surface even and smooth.

M & L for preparation of old decorated concrete/ plastered surfaces of walls, Pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots & rubbing with sand paper and applying two coat of oil bound distemper on old decorated wall surface including necessary filling of wall care putty on uneven surface as and where required.

Preparation of new plastered or unplastered surfaces of walls to achieve smooth and even surface and applying two coats of distemper oil emulsion over and including one coat of primer over two coats of wall care putty 1 to 2 mm thick on plastered surfaces,preparatory to distempering complete all as specified and as directed by Engineer-In-Charge.

Material and labour for preparation of new decorated/ plastered/concrete surface of wall, chajja, facia, face of columns, beam etc and applying two coats of weather proof exterior emulsion (APEX) with necessary scaffolding including necessary filling of wall care putty on uneven surface as and where required all as specified

M&L for preparation of old decorative plastered/concreat surface of wall, chajja, facia, face of columns, beam ect by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots & rubbing with sand paper and applying one coat of weather proof exterior emulsion with necessary scaffoding up to 2nd storey, including necessary filling of wall care putty on uneven surface as and where required all as specified.

M & L for preparation of new plastered/concrete surfaces of walls, (up to 2nd sorey with necessary scaffolding) and applying two coat of cement based paint over one coat of primer complete all as per specified and directed by Engr-in-charge.

M & L for preparation of old decorated plastered /concrete/ brick surfaces of walls (up to 4th storey with necessary scaffolding) and applying one coat of cement based paint on old decorated surfaces including preparation.

M & L for preparation of old decorated brick /concrete plastered /un-plastered surfaces of walls, Pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of lime white wash on the walls, pillars, cornices etc. complete all as specified and directed.

M & L for preparation of new decorated brick /concrete plastered /un-plastered surfaces of walls, Pillars, cornices etc and applying one coat of white wash on ceiling.

M/S ANIL MAHAJAN

M/S Sukhmani Construction Co.

M/s Sunny Builders

M/s Rajesh Mehra