Loading
Loading…
Loading…
Tender Value
₹1.3 Cr
EMD Value
₹2.1 L
Closing Date
16 Feb 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
ELECTRICAL
14 conditions · 3 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. Balance sheet for the 4th previous year as para 10.2 of GCC-2022 shall be considered in evaluation of financial eligibility criteria only when it is clearly certified in Annx.-VI B or a self-declared certificate duly signed by chartered accountant and the tenderer that the balance sheet of last financial year has not been audited/ yet to be prepared.
The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender. Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate. Substantially Completed Work means an ongoing work in which payment equal to or more than 90% of the present contract value (excluding the payment made for adjustment of Price variation (PVC), if any) has been made to the contractor in that ongoing contract and no proceedings of termination of contract on Contractor's default has been initiated. The credential certificate in this regard should have been issued not prior to 60 days of date of invitation of present tender.
Definition of similar work: "Satisfactory execution of any electrical work related to HT/LT installation."
43 conditions · 9 needing a document upload
Please furnish documents in support of your claim to fulfil the eligibility criteria as mentioned in tender documents. Each page of copy of documents/ certificates in support of credential, submitted by you shall be self attested/digitally signed by the you or authorized representative of your firm. Only those documents which are declared explicitly by you as "documents supporting the claim of qualifying the laid down eligibility criteria" will be considered for evaluating the offer or otherwise available in the offer.
No deviation shall be accepted, in case of deviation in any term and condition in tender documents offer will summarily be rejected.
Requisite documents proving technical eligibility criteria and technical eligibility criteria have been uploaded along with those required as per explanation given in clause 10 of IRGCC-2022 (Works matter).
All requisite valid documents regarding constitution of business of the bidding firm should be submitted along with the tender as per clause 14 of IRGCC-2022 (Works matter), otherwise their offer will be considered incomplete and shall not be considered.
The tenderer whether sole proprietor / a company or a partnership firm / joint venture (JV) / registered society / registered trust / HUF / LLP etc if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, specifically authorizing him/them to sign the tender, submit the tender and further to deal with the Tender/ Contract up to the stage of signing the agreement except in case where such specific person is authorized for above purposes through a provision made in the partnership deed / Memorandum of Understanding / Article of Association /Board resolution, failing which tender shall be summarily rejected. A separate power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, shall be submitted after award of work, specifically authorizing him/them to deal with all other contractual activities subsequent to signing of agreement, if required. Note: A Power of Attorney executed and issued overseas, the document will also have to be legalized by the Indian Embassy and notarized in the jurisdiction where the Power of Attorney is being issued. However, the Power of Attorney provided by Bidders from countries that have signed the Hague Legislation Convention 1961 are not required to be legalized by the Indian Embassy if it carries a conforming Appostille certificate. Reference: para 15 of IRGCC-2022 (Works matter),otherwise their offer will be considered incomplete and shall not be considered.
Partnership firm, if applicable in the instant tender, should submit all valid requisite documents and full fill the stipulations as per clause 18 of IRGCC-2022 (works matter), otherwise their offer will be considered incomplete and shall not be considered.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Please submit your Bank details of the firm /individual/JV/partnership etc. i.e. Name of the Bank along with Bank Branch code, account No., IFSC Code, PAN Number and other necessary & relevant documents.
Tenderers are advised to visit the site of work to ascertain all aspects of the site conditions viz accessibility, availability of approach road, nature of the soil, availability of material, availability of labour etc. that may be encountered in course of execution of work.
Tenderer should see the website for the corrigendum/addendum to the NIT/tender document, if any that may be uploaded prior to tender opening (inclusive) as there will not be any separate communication for that.
The tenderer for carrying any construction work in Uttar Pradesh must get themselves registered from the registering Officer under Section - 7 of the Building and Other Construction Workers Act, 1996 and rules made there-to by the Uttar Pradesh Govt. and submit certificate of Registration (Labour Department). For enactment of this Act, the tenderer shall be required to pay cess @ 1% of cost of construction work to be deducted from each bill.
The contractor(s) shall observe all the formalities, perform all the acts and abide by all the provisions contained in the Contract Labour Act-1970 and Contract Labour Central Rules, 1971 which in addition to other stipulations provides that the contractor(s) shall obtain license(s) from appropriate licensing officer of the area before commencement of the work and shall produce a copy thereof along with the original to the Railway office, which will be returned to the contractor after verification.
If any complaint is received against the contractor regarding violation of contract laws, (exposing Principal Employer to the risk of legal proceedings under labour laws), the guilty contractor will be black listed and their contract shall be terminated following the due procedure, apart from initiating criminal proceedings against him with the help of Labour department officials. (Authority: RB letter no.2008/E (LI)/AT/CNR/3, dated 24.01.2018).
The tenderer has to submit necessary documents in compliance of clause 10 to 18 (Part-I) of IRGCC 2022 (Works matter) mandatorily, otherwise offer will be considered as Incomplete Offer and accordingly shall not be considered.
It is the responsibility of the tenderer to see corrigendum, if any, to tender notice up to the date of tender opening. IRGCC-2022 (works matter) is for reference only. Any correction issued by competent authority up to date of opening will be applicable. Tenderer should quote accordingly.
Railways reserves the right to accept or reject any or all the tenders and to award the work in whole or in part without assigning the reason for any such action.
It is to be noted that tenderer digital signature on the E-Tender form will be considered as confirmation that tenderer have read and accepted all the conditions laid down in the documents as well as related specification of items, schedule & quantity of items in the tender, consisting of techno-commercial offer form (including special conditions attached to E-Tender) and Financial offer form.
The quantities shown in the attached Schedule are given as a guide and are approximate only and are as a guide to give the tenderer(s) an idea of quantum of work involved. Quantities are subject to variation according to the needs of the Railway. The Railway does not guarantee work under each item of the Schedule. The Railway reserves the right to increase/ decrease and/or delete or include any of the quantities given above and no extra rate will be allowed on this account.
In case of any information submitted by tenderer is found to be false forged or incorrect at any time during process for evaluation of tenders, it shall lead to forfeiture of the tender Earnest Money Deposit besides banning of business for a period of upto five years. In case of any information submitted by tenderer is found to be false forged or incorrect after the award of contract, the contract shall be terminated. Earnest Money Deposit (EMD), Performance Guarantee and Security Deposit available with the railway shall be forfeited. In addition, other dues of the contractor, if any, under this contract shall be forfeited and agency shall be banned for doing business for a period of upto five years.
Opening of e-tender online:- The e-tenders will be opened online using the IREPS portal. No representative is required to be present for opening of tender and taking notes of rates quoted and ranking as the complete details of rates etc. of all the bidders shall be available to the bidders in the website after the opening of the tender.
In case the date of closing mentioned in the Notice Inviting Tender is declared a holiday/bandh/strike etc. on any account, the date of closing tender online will not be changed as the application in the website of IREPS does not permit submission of any offer after closing date and time of the tender. However, opening of tenders online will be on any convenient day after the closing date/time of tenders.
All the bidders / tenderers should ensure that they are GST compliant and their quoted tax structure / rates are as per GST Law ( Ref - Railway Board letter No.2008/RS(G)/777/1 Dated - 29/5/2017 )
GCC 2022 for works Contract
The Bid Security shall be deposited either in cash through e- payment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender documents. The Bank Guarantee bond shall be as per Annexure- VIA and shall be valid for a period of 90days beyond the bid validity period. In case, submission of Bid Security in the form of Bank Guarantee, following shall be ensured: i. A scanned copy of the Bank Guarantee shall be uploaded on e-Procurement Portal (IREPS) while applying to the tender. ii. The original Bank Guarantee should be delivered in person to the official nominated as indicated in the tender document within 5 working days of deadline of submission of bids. iii. Non submission of scanned copy of Bank Guarantee with the bid on e-tendering portal (IREPS) and/or non submission of original Bank Guarantee within the specified period shall lead to summary rejection of bid. iv. The Tender Security shall remain valid for a period of 90 days beyond the validity period for the Tender. v. The details of the BG, physically submitted should match with the details available in the scanned copy and the data entered during bid submission time, failing which the bid will be rejected. vi. The Bank Guarantee shall be placed in an envelope, which shall be sealed. The envelope shall clearly bear the identification "Bid for the ***** Project" and shall clearly indicate the name and address of the Bidder. In addition, the Bid Due Date should be indicated on the right hand top corner of the envelope. vii. The envelope shall be addressed to Sr.DEE/G/PRYJ, DRM office Nawab Yusuf Road, Prayagraj-211001. viii. If the envelope is not sealed and marked as instructed above, the Railway assumes no responsibility for the misplacement or premature opening of the contents of the Bid submitted and consequent losses, if any, suffered by the Bidder.
Electrical work in connection with Prayagraj Division - Construction of a new island platform at SFG by dismantling of line No. 2 & 3 along with retaining of existing PF No. 6 and Provision of Parcel office at SFG.
ELG-146-2526~NCR
ELG-146-2526
Open
Works - General
6 Months
Prayagraj, Uttar Pradesh
₹0
₹2.1 L
16 Feb 2026
22 Jan 2026
2 Feb 2026
77 items across 1 schedule · ₹1,29,18,268.54 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Wiring for circuit / sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/recessed PVC conduit as required. 2 x 4 sq. mm+ 1 x 4 sq. mm earth wire.Inspection by- Consignee | Metre 7500.00 | — | 198.12 | 14,85,900 |
| 2 | Wiring for circuit / sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/recessed PVC conduit as required. 2 x 6 sq. mm+ 1 x 6 sq. mm earth wire Inspection by- Consignee. | Metre 1100.00 | — | 243.1 | 2,67,410 |
| 3 | Wiring for circuit / sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/recessed PVC conduit a s required. 2 x 1 0 s q . m m + 1 x 10 sq. mm earth wire.Inspection by- Consignee | Metre 1300.00 | — | 545.54 | 7,09,202 |
| 4 | Wiring for light/power plug with 2x4 sq.mm FRLS PVC insulated copper conductor single c o r e c a b l e insurface/recessed m e d i u m class PVC conduit, along with 1 N o . 4 sq.mm FRLS P V C insulated copper conductor single core cable f o r loop earthing as required.Inspection by- Consignee | Numbers 2700.00 | — | 195.25 | 5,27,175 |
| 5 | Supply, Erection, Testing and Commissioning of following Modular Type switch 10 A (1-way) c o m p l e t e in all respect.Inspection by- Consignee. | Numbers 2565.00 | — | 62.06 | 1,59,183.9 |
| 6 | Supply, Erection, Testing and Commissioning of following Modular type Plug socket outlet 2/3 Pin 10 A complete i n all respect.Inspection by- Consignee. | Numbers 240.00 | — | 102.61 | 24,626.4 |
| 7 | Supply, Erection, Testing and Commissioning of following Modular Type switch 20 A (1-way) c o m p l e t e in all respect. Inspection by- Consignee. | Numbers 130.00 | — | 126.62 | 16,460.6 |
| 8 | Supply, Erection, Testing and Commissioning of following Modular type Plug socket outlet 5/3 Pin 20 A complete i n all respect.Inspection by- Consignee. | Numbers 130.00 | — | 146.46 | 19,039.8 |
| 9 | Supply, Erection, Testing and Commissioning of following Modular type step type Electronic Fan Regulator complete i n a l l respect. Inspection by- Consignee. | Numbers 250.00 | — | 207.98 | 51,995 |
| 10 | Supply and Erection of Junction Box cover POP type complete in all respect including hardware material for fixing. Inspection by- Consignee. | Numbers 2030.00 | — | 5.23 | 10,616.9 |
| 11 | Supply a n d Erection o f Modular t y p e switch blanking s e t t o fi l l the blank s p a c e White finished mounting cover plate complete i n all respect.Inspection by- Consignee. | Numbers 120.00 | — | 7.51 | 901.2 |
| 12 | S u p p l y a n d Erection o f w h i t e fi n i s h single mounting cover plate with base frame suitable 3 module suitable for mounting of Modular type piano switches/ plug Socket, fan regulator and connection to wiring.Inspection by- Consignee. | Numbers 55.00 | — | 66.2 | 3,641 |
| 13 | S u p p l y a n d Erection o f w h i t e fi n i s h single mounting cover plate with base frame suitable 8 module suitable for mounting of Modular type piano switches/ plug Socket, fan regulator and connection to wiring.Inspection by- Consignee. | Numbers 70.00 | — | 139.85 | 9,789.5 |
| 14 | S u p p l y a n d Erection o f w h i t e fi n i s h single mounting cover plate with base frame suitable 1 2 module suitable f o r mounting o f Modular type piano switches/ plug Socket, fan regulator a n d c o n n e c t i o n t o wiring.Inspection by- Consignee. | Numbers 88.00 | — | 201.91 | 17,768.08 |
| 15 | Supply a n d Erection o f Modular Metal boxes concealed Boards suitable for mounting o f 3 module white finish single mounting cover plate with Frame a n d Modular type piano switches/ plug Socket, fan regulators. Metal board boxes a r e to be concealed in wall. Inspection by- Consignee. | Numbers 55.00 | — | 43.43 | 2,388.65 |
| 16 | Supply a n d Erection o f Modular Metal boxes concealed Boards suitable for mounting o f 8 module white finish single mounting cover plate with Frame a n d Modular type piano switches/ plug Socket, fan regulators. Metal board boxes a r e to be concealed in wall.Inspection by- Consignee. | Numbers 70.00 | — | 76.14 | 5,329.8 |
| 17 | Supply a n d Erection o f Modular Metal boxes concealed Boards suitable for mounting o f 12 module white finish single mounting cover plate with Frame a n d Modular type piano switches/ plug Socket, fan regulators. Metal board boxes a r e t o b e concealed i n wall. Inspection by- Consignee. | Numbers 88.00 | — | 122.47 | 10,777.36 |
| 18 | Supply and Installation of Ceiling rose 3 plate as per I S No. 371/1999 (Latest Version) including connections, Testing and commissioning as per Tech. Specification. Inspection by- Consignee. | Numbers 340.00 | — | 14.44 | 4,909.6 |
| 19 | Supply and recessing/fixing of PVC Conduit pipe 25 mm (Medium) conforming to IS 9537/ Part III/1983 (Latest version) with accessories, junction box, etc including making chase, plastering/ clamping etc as per technical specifications.Inspection by- Consignee. | Metre 500.00 | — | 47.22 | 23,610 |
| 20 | Supply of PVC insulated multi stranded copper conductor single core FRLSH cable 2.5 Sq. mm conforming to IS: 694 (latest version), and drawing in laid (recessed /surface) PVC conduit pipe for wiring of point wiring/ circuit wiring/sub main/ Main as required as per technical specification including connections, testing and commissioning.Inspection by- Consignee. | Metre 400.00 | — | 23.55 | 9,420 |
| 21 | Supply of PVC insulated multi stranded copper conductor single core FRLSH cable 4.0 Sq. mm conforming to IS: 694(latest version), and drawing in laid (recessed /surface) PVC conduit pipe for wiring of point wiring/ circuit wiring/sub main/ Main as required as per technical specification including connections, testing and commissioning.Inspection by- Consignee. | Metre 400.00 | — | 36.37 | 14,548 |
| 22 | Supply of PVC insulated multi stranded copper conductor single core FRLSH cable 6.0 Sq. mm conforming to IS: 694 (latest version), and drawing in laid (recessed /surface) PVC conduit pipe for wiring of point wiring/ circuit wiring/sub main/ Main as required as per technical specification including connections, testing and commissioning.Inspection by- Consignee. | Metre 300.00 | — | 50.19 | 15,057 |
| 23 | Supply of PVC insulated multi stranded copper conductor single core HRFR cable 1.5 Sq. mm conforming to IS: 694 (latest version), and drawing in laid (recessed /surface) PVC conduit pipe for Earth wire as required as per technical specification including connections, testing and commissioning.Inspection by- Consignee. | Metre 600.00 | — | 15.22 | 9,132 |
| 24 | Supply and recessing/fixing on surface of 6 SWG GI wire conforming to IS: 280/2006 (Latest Version) for loop earthing as required for earthing of installation as per IE Rule.Inspection by- Consignee. | Metre 500.00 | — | 9.54 | 4,770 |
| 25 | Fabrication, Supply and Fixing of Fan Hook with clamp duly painted madeof 50x6 mm MS Flat with nut bolts suitable to fix on PP shelter bracing angle as required. Inspection by- Consignee. | Numbers 15.00 | — | 103.72 | 1,555.8 |
| 26 | Termination of LT XLPE cables o f various sizes (One Job means all 4 cores of cables) | Job 35.00 | — | 111.69 | 3,909.15 |
| 27 | Collecting, Transporting from SSE/PS/ store to site, laying, testing, and commissioning of a b o v e L T c a b l e . L a y i n g d i r e c t i n ground (Including excavation, s a n d cushioning, protection b r i c k covering a n d refilling the t r e n c h e t c . ) , d i r e c t i n RCC/Metal p i p e s in rod/track crossings and on surface/required in wall/in concrete floor b y cutting recessed and finished originally as required as per relevant technical specifications. | Metre 5500.00 | — | 61.03 | 3,35,665 |
| 28 | Drilling o f bituminous road/track a n d laying charges of cable in road crossing for laying 110 mm dia HDPE pipe through it. | Metre 1000.00 | — | 262.43 | 2,62,430 |
| 29 | Supply and laying o f HDPE Pipes (Upto P N 8.0 Pressure Rating Material Grade: PE 63, Pressure Rating: P N 8.0, Nominal Dia(mm): 110) a s per IS-4984:2016 suitable for HT/LT XLPE cable & as r e q u i r e d a n d a s per relevant technical specification. Inspection by- Consignee. | Metre 1000.00 | — | 236.18 | 2,36,180 |
| 30 | Supply, erection, testing and commissioning of One phase distribution board comprising of one no. 32/40 amps DP MCB with 4 0 A ELCB/RCCB as incoming and 4 nos. 10 amps SP MCB , 4 nos. 20 A SP MCB as outgoing complete with copper bus bars, neutral link and other accessories housed i n CRC A sheet enclosure w ith double door type. Inspection by- Consignee. | Numbers 19.00 | — | 3,184.95 | 60,514.05 |
| 31 | S u p p l y , fi x i n g , t e s t i n g , c o n n e c t i n g and commissioning o f w a l l mounted Bracket Fan 400 mm sweep including supply of M.S. fixing clamps & its hardware w i t h flexible copper cable twin twisted size 24/0.20. 01 mtr long for each fittings as required. Inspection by- Consignee. | Numbers 30.00 | — | 1,438.62 | 43,158.6 |
| 32 | S u p p l y , t e s t i n g a n d commissioning o f fly catcher o f size-63 x 1 7 x 45 cm3, 2 n o s UV lights o f 2 feet 1 8 watt each a s p e r relevant technical specification.Inspection by- Consignee. | Numbers 8.00 | — | 2,617.53 | 20,940.24 |
| 33 | Supply, fixing, testing a n d commissioning of 2 5 0 m m s w e e p f r e s h air fan complete.Inspection by- Consignee. | Numbers 21.00 | — | 1,041.12 | 21,863.52 |
| 34 | Supply, erection, testing and commissioning of single earth electrode of 50 mm. dia 4000mm long G I pipe class B complete with earth box with CI c o v e r hinged t o C I f r a m e including c o n n e c t i o n f r o m e a r t h electrode to MDB/SDB/poles/with 8 swg G I wire/strip a s per attached drawing. Inspection by- Consignee. | Numbers 41.00 | — | 2,563.18 | 1,05,090.38 |
| 35 | Supply, fixing, testing a n d commissioning of wall mounted LT distribution board made u p of s t e e l sheet, phosphatised p o w d e r painted complete with neutral link,earth point, Din rail and prewired confirming to I S : 1 3 0 3 2 & 8623:1991 with following items to b e fixed in distribution board, confirming t o IS:8828 :1996 orlatest, I E r u l e s a n d site requirement. 4P, M C C B 1 2 5 Amps. 1 0 k A ' C ' series= 0 1 No. (Incoming) DP RCCB (40 & 6 3 Amps., two nos. each) 1 0 k A ' C ' series = 04 Nos.(Outgoing). Inspection by- Consignee. | Numbers 4.00 | — | 20,340.53 | 81,362.12 |
| 36 | Supply and erection of 6 Mtr. Galvanized (asper BS EN ISO 1461) octagonal pole with baseplate 220x220x12mm, top 70mm and bottom130mm of 3mm thick sheet suitable formaximum wind speed upto 1 6 0 Km/Hr.including foundation bolts and foundation withM 20 grade RCC and FE 415 gradereinforcement (450x450x800 mm deep )(foundation should b e a s p e r design approvedby pole manufacturer) GI base plate G . I . a n c h o r p l a t e e t c . a s required includingsupplying and fixing of double arm hot dippedgalvanized bracket suitable f o r street lightfittings a n d supplying a n d d r a w i n g of 3x2.5Sq.mm F R L S copper conductor single corecable f r o m junction b o x w i t h t w o Nos 6/10AMPMCB t o l u m i n a i r e complete includingtermination w i t h copper lugs as required.Inspection by- RITES. | Numbers 140.00 | — | 8,936.17 | 12,51,063.8 |
| 37 | Supply a n d erection w i t h p r o p e r foundation C la s s ic S t e e l p o l e 6 Mtrs.(in size 2000 (140x4.8mm)x4000 mm²(90x4mm) ) are made out ofglavanised m i l d steel tubles w i t h cast aluminiumembellishmets. The poles are coated a n d paintedwith polyurethane p a i n t . Poles aresuitable for single/double /triple/four side p o s t top/downluminaries.The poles has a s e r v i c e window(140x4.8 m m ) a t the bottomcomprising four way25 Amp connector terminal and a MCB. poles canbe mounted with four numbers anchor bolts as perfoundaion ( i n s i z e 300x210 mm²).Inspection by- Consignee. | Numbers 20.00 | — | 18,584.76 | 3,71,695.2 |
| 38 | Supply, fixing, testing and commissioning of GRP (Glass fiber reinforced polyester) enclosure IP-66 and mechanical impact IK 10 with polymide screws conversional not spring loaded type with 120 degree celcius ambient temp resistance pre-cooling unit (1)-50 square MM bus bar terminal bock-04 nos (2)- 63 AF P MCB 10 KA -01 no. (3)-IP 67 63A 5 pin socket-1 no. (4) -IP 67 63A 5 Pin plug-1 no. with complete internal wiring with cable wall thickness-3 mm Dimension-[360L X 360H X 205D] MM Wall mounted outdoor type.Inspection by- Consignee. | Numbers 20.00 | — | 14,877 | 2,97,540 |
| 39 | D e s i g n , Manufacturing, Supply, Erection, testing and commissioning o f LT switch gear panel board of 02 mm Tk. Diapressed CRS steel sheet panel shallbe treated for anti corrosion treatment and finished with smoke gray paint a s per technical specification no. Sr.DEE/G/ALD/Panel- 94/113 Comprising with as under: MCCB of 400 A, 36 kA Standard breaking capacity, 415volt, 3 Phase 4 Pole current rating 400 Amp. | Numbers 3.00 | — | 14,623.08 | 43,869.24 |
| 40 | Supply o f MCCB 250A, 50Hz 36kA Confirming IS: 13947:1994. | Numbers 4.00 | — | 11,087.86 | 44,351.44 |
| 41 | Supply o f MCCB 125A, 50Hz. 36kA Confirming IS:13947:1995. | Numbers 6.00 | — | 6,423.54 | 38,541.24 |
| 42 | MCCB of 63A, 36 kA Standardbreaking capacity, 4 1 5 volt, 3Phase 4 P o l e c u r r e n t rating 63Amp.Inspection by- Consignee. | Numbers 12.00 | — | 3,114.3 | 37,371.6 |
| 43 | Supply of Indicator lamps with suitable holder. | Numbers 57.00 | — | 78.87 | 4,495.59 |
| 44 | S u p p l y , fi x i n g , t e s t i n g , c o n n e c t i n g and com m issio ning of Outgoing/Feeder Panel M ounte d Multi-function M t r s . with Accuracy Class 1 as per IEC 62053-21 or Class 0.5, 0.5S a s per IEC 62053-22.LED M t r s . C l 1 with RS485:Mtrs. s h o u l d have following features built-in LED • Flush mounting 9 6 x 9 6 m m • True RMS measurement • Password protection provision for security • S i t e selectable f o r 3 Phase 4 wire, 3 Phase 3 wire, 1 Phase, CT Secondary 1A/5A, Universal Auxiliary Supply 80-300 VAC/DC, Input Voltage Measurement 50-500 VAC, 6 4 samples/ cycle T h e Mtrs. should b e able t o read/ display following para Mtrs. Instantaneous Para Mtrs. (V1, V2, V3, V12, V23, V31, Avg (VLN, VLL), A 1 , A 2 , A3, Aavg, F, PF-1, PF-2, PF-3, PF (Avg) W1, W2, W3, W (total) VA1, VA2, VA3, VA (total) Cumulative N um be rs 2 0 2 2 3 1 .9 2 44638.40 Para Mtrs. (Import Wh, Import Vah, Import l o a d hours, Reset (old) Cumulative para Mtrs. (Import Wh, I m p o r t load hours, Communication (RS485 Modus RTU).complete with all accessories. | Numbers 17.00 | — | 2,500.87 | 42,514.79 |
| 45 | Fabrication works and insulated Aluminum bus bars of 800A capacity for phases & 800A capacity for neutral Bus bar shall be suitably insulated with heat shrinkable sleeves/ epoxy coating/insulating tap to withstand the test voltage of 2.5 KV Copper strip for connection outgoing as well as incoming with suitable size be provided. LT Panel form item No. 39 to 45 will be Inspection by-Consignee. | Numbers 1.00 | — | 44,706.74 | 44,706.74 |
| 46 | S u p p l y , fi x i n g , t e s t i n g , c o n n e c t i n g and commissioning of 40 Watt or above Drop Down L E D Light fitting , front opening (Milky/Clear) with die c a s t a l u m i n i u m h o u s i n g with t o u g h e n e d g l a s s . L E D Luminaries:-(1) A complete LED lighting unit consisting o f alight s o u r c e a n d driver together w i t h p a r t s of distribute lights,to position and protect the light source, a n d t o connect t h e lightsource t o a branch circuit.The light source itself may be an LEDarray and LED module, or an LED lamp.(2): S u p p l i e d LEDluminaries s h a l l c o n fi r m to IS:16101 (2012) IS:16106(2012). Light Source (LED) in the Luminaries should be ofmake:- (1):- N I C H I A / C R E E / O S R A M / SEOUL/ P H I L I P S / L U M I L E D S / L E D N I U M . (2):-LEDs toIS:16105(2012). I S : 1 6 1 0 8 ( 2 0 1 2 ) , I E C : 6 2 4 7 1 . Ty p e LED:- H i g h p o w e r L E D , S M D (Surface Mounting device)/COB (Clip o n board). 1.Input operating voltage :-105- 295 V A C . 2 : - NormalVoltage- 220V AC, 3.Driver type: constant current potted driver withshort circuit protection. 4 . LED life:- >=50000 burninghours.5.Depreciation:- 30% m a x . a f t e r 50000 burninghours.6.Control of distribution:- Full cut off. 7.Surge protection: 4KV. 8. Drive component :Industrial gradeonly. 9 . Efficiency o f driver electronic>; 8 5 % . 10. Beamangle:>=140 degree along with road and & 8 0 > d e g r e e a c r o s s t h e r o a d . 11.Colour temperature: 5000-6500K.12. Colourrendering index (CRI):>75. 13. Ingress protection :IP-66. 14. Lumen output: >;=120 lumens/watt. 15. P o w e r factor>;=0.95. 1 6 . Total harmonics d i s t o r t i o n ( T H D ) : - < 1 5 % . 1 7 . Lampcover : To u g h e n e d g l a s s or UV stablised polycarbonate. 1 8 . Finishing:Power coated /Anodized. 19.Secondryoptics :poly carbonate reflector/ poly carbonateslens. 20. Construction o f housing: extrudedaluminum/CRCA/Pressure die castaluminum. 2 1 . Mounting: Suitable for existing pole/Truss/Lanternmounted. 22. Certificate:Firm t o submit L M 8 0 (In respect of LEDused) & LM79(In respect of luminaire used) test certificate fromNational/International accredited Laboratory a n d OEM certificate for compliance o f BIS/IEC. 2 3 . Warranty: Firm tosubmit warranty certificate for five year along w i t h t h e s u p p l y. A l l fittings should be embossed/sticker with manufacturing date and warranty. Inspection by- Consignee. | Numbers 20.00 | — | 6,888.39 | 1,37,767.8 |
| 47 | Supply and Erection of Fan Box cover POP type complete i n a l l respect including hardware material for fixing. Inspection by-Consignee. | Numbers 250.00 | — | 10.26 | 2,565 |
| 48 | Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less t h a n 0 . 9 , Service Va l u e (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote o r electronic regulator unit for speed control and all remaining accessories in c lu d in g s a f e t y p i n , n u t bolts, washers, temperature r i s e = 7 5 d e g r e e C (max.), insulation resistance more than 2 mega ohm, suitable f o r 2 3 0 V , 5 0 H z , single p h a s e AC Supply, earthing etc. complete as required. Inspection by- RITES. | Numbers 255.00 | — | 2,208.91 | 5,63,272.05 |
| 49 | Supply, replacement, fixing, testing, connecting a n d c o m m i s s i o n i n g of energy efficient luminaries complete w i t h a l l accessries of capacity 18/20 w a t t , 4 f e e t length, T 8 LED lamps with sutable current control potted driver c i r c u i t , s u i t a b l e f o r surface/recessed mounting.LED Luminaries:-(1) A complete LED lighting unit consisting of a light source and driver together with parts o f distribute light,to position a n d protect the light source,and to connect the light source to a branch circuit.The light source itself may be an LED array and LED module, o r a n LED lamp. (2):-Supplied LED luminaries shall confirm t o IS:16101(2012) IS :16106(2012) . L i g h t S o u r c e ( L E D ) i n the Luminaries should b e o f make: (1):-NICHIA/ CREE/OSRAM/ SEOUL/ PHILIPS/LUMILEDS /LEDNIUM. (2):-LEDs t o I S : 16105(2012). IS:16108(2012), IEC:62471.1.Input operating voltage :-105-295 V A C . 2:-Normal Voltage- 220V AC.3.Driver type: constant current driver w i t h s h o r t circuit protection(For tube light). 4.Control o f distribution:-Full c u t o ff . 5.Drive component :Industrial grade only .6.Efficiency o f d r i v e r electronic: > 8 5 % ( F o r tube l i g h t ) . 7 . C o l o u r temperature:5000-6500K(For t u b e l i g h t ) . 8.Colour rendering index(CRI):>75(For t u b e l i g h t ) . 9.Ingress protection :IP-20. 10.Lumen o u t p u t : >100 lumens/[email protected] d r i v e current(For t u b e light). 11.Power factor:->0.90(For tube l i g h t ) . 1 2 . To t a l hormonics distrotion(THD):- <20% (For tube light). 13. Lamp cover :Acrylic cover which does not result i n loss o f lumens. 1 4 . Fi n i s h i n g : P o w e r coated /Anodized. 15.Secondry optics:poly corbonate reflector/ p o l y carbonate lens. 1 6 . Construction of housing: extruded aluminum/CRCA/Pressure die c a s t a l u m i n u m . 17.Mounting : S u i t a b l e for surface mounting/recessed m o u n t i n g . 18. Certificate: Firm t o submit LM80(In respect of LED used) & LM79 (In respect of luminare used) test certificate f r o m National/International accredited Laboratory a n d OEM certificate for complience o f BIS/IEC. 19.Warranty:Firm to submit warranty certificate for five year along w ith t h e supply.All fittings shall be fitted as s u r f a c e mounting/recessed m o u n t i n g with twisted twin flexible c o r d o f minimum size 16/0.2 m m copper conductor a s per relevant t e c h n i c a l s p e c i fi c a t i o n . Inspection by- Consignee. | Numbers 900.00 | — | 313.49 | 2,82,141 |
| 50 | Provision of Geyser points having MCB 16 A S/P w ith 3 / 5 p i n 5/15 amps plug points w ith 1.5 sqmm (22/0.3mm) / 2.5 sqmm (36/0.3mm) PVC insulated s i n g l e c o r e unsheathed stranded Copper conductor ISI marked i n recessed PVC pipe o f ISI marked a n d M S switch b o x having w a l l thickness 1 6 S W G w i t h 3 m m thick phenolic laminated sheet cover including providing and fixing 3/5 pin 5/15 Amps socket outlets and 5/15 Amps piano type switch and earthing t h e 3 r d p i n w i t h 16 SWG/(1.5sqmm PVC insulated single core unsheathed stranded Copper conductor) Copper earth wire along with p i p e d u l y clamped a s required and as per relevant technical specification. ( 15 AMP) .Inspection by- Consignee. | Numbers 23.00 | — | 469.84 | 10,806.32 |
| 51 | Supply, installation, testing & commissioning of 2 5 ltrs stationary storage type electric water heater (Geyser) having BEE star rating- 5 star 2018 or latest, Installation : vertical, ABS Body, element wattage - 2kW, Tank capacity - 25 ltrs, conforming t o I S : 2082/1993 w i t h latest a m e n d m e n t c o m p l e t e a n d a s p e r site requirement.Inspection by- Consignee. | Numbers 8.00 | — | 3,247.69 | 25,981.52 |
| 52 | Supply, fixing, connecting and commissioning of 5 K V A s i n g l e phase, automatic Voltage corrector a s p e r IS:8448/1973 a n d latest amendment up to date ,input voltage (Min)-140 Volt, output voltage - 230 Volt +10% with time delay relay. Inspection by- Consignee. | Numbers 16.00 | — | 6,817.05 | 1,09,072.8 |
| 53 | Supply, fixing, connecting and commissioning of P V C d r a i n p i p e o f size 3/4' with split unit. Inspection by-Consignee. | Metre 150.00 | — | 35.73 | 5,359.5 |
| 54 | Supply, fixing, connecting a n d commissioning o f s p l i t A C o f c a p a c i t y 2.0 Ton, Nominal CoolingCapacity (KCal/Hr):6000 suitable for 230 volt, AC 1Phase, Material f o r b o d y o f indoor u n i t : A B S , M i n . Ro o m D i s c h a r g e Air flow (Cum/Hr): 700,Guaranteed C o o i n g Capacity ( M i n ) KCal/Hr: 4275Operation o n ecofriendly refrigerant R-32 o r R-410a,with wall mounting arrangement, confirming toIS:1391 Part-II with latest amendment up to datedStar Rating - 5.Inspection by- RITES. | Numbers 15.00 | — | 56,998.3 | 8,54,974.5 |
| 55 | S u p p l y , fi x i n g , t e s t i n g , connecting andcommissioning o f s t o r a g e type water coolersimilar t o M o d e l S D L X 1 0 0 , Cooling Capacity-170 l i t r e per hour, 380/400 litre S t o r a g e withfoundation/platform & cage. Inspection by- RITES. | Numbers 8.00 | — | 63,725.71 | 5,09,805.68 |
| 56 | S u p p l y , r e p l a c e m e n t , fi x i n g , testing, connectingand commissioning of 72 Wa t t or above LEDstreet lights fittings as per IS:10322. LEDLuminaries:-(1) A complete L E D lighting unitconsisting o f a light source a n d potted drivertogether w i t h p a r t s o f distribute lights,toposition a n d p r o t e c t t h e light source,and t o connect t h e light source t o a branch circuit.The light source itself may be an LED array andLED module, or an LED lamp.(2):- S u p p l i e d LEDluminaries shall confirm to I S : 1 6 1 0 1 ( 2 0 1 2 ) I S : 1 6 1 0 6 ( 2 0 1 2 ) . Light Source(LED) in theLuminaries s h o u l d b e of m a k e : - (1):-NICHIA/CREE/OSRAM/ SEOUL/ PHILIPS/LUMILEDS/LEDNIUM. ( 2 ) : - L E D s to IS:16105(2012).IS:16108(2012), IEC:62471. T y p e L E D : - Highpower LED,SMD(Surface Mountingdevice)/COB(Clip o n board). 1.Input operatingvoltage :-105-295 V A C . 2 : - Normal Vo l t a g e - 2 2 0 V AC,3.Driver type: constant c u r r e n t driverwith s h o r t c i r c u i t protection. 4 . L E D life:- >50000 b u r n i n g hours. 5.Depreciation:- 30%max.after 50000 burning hours.6.Control ofdistribution:-Full c u t off. 7.Surgeprotection:4KV. 8.Drive component :Industrialgrade only.9.Efficiency o f driver e l e c t r o n i c : > 8 5 % . 1 0 . B e a m angle:>=140 degree along withroad and >=80 degree across t h e r o a d . 1 1 . C o l o u r t e m p e r a t u r e : 5000- 6 5 0 0 K . 1 2 . C o l o u r rendering index(CRI):>=75.13.Ingress p r o t e c t i o n :IP- 66.14.Lumen output:>120 lumens/watt.15.Power factor:->0.95.16.Total h a r m o n i c s distortion(THD):-<15%.17.Lamp cover :Toughened glass or UVstabilised poly carbonate. 18.Finishing:Powercoated/Anodized. 1 9 . S e c o n d r y optics:polycarbonate reflector/ p o l y carbonates lens.20.Construction of housing: extrudedaluminum/ CRCA/Pressure die c a s t aluminum.21.Mounting : S u i t a b l e for e x i s t i n g pole/ Truss/Lantern mounted. 22.Certificate:Firm to submitLM 80(In respect of LED used) & LM79 (Inrespect of luminare used) t e s t certificate fromNational/ International accredited Laboratoryand O E M certificate for com plia nc e o f BIS/IEC.23.Warranty:Firm to submit warrantycertificate f o r fi v e yea r along with the supply.All fittings shall be fitted with new suitablebend/elbow with clamp and proper n u t and boltand connection w ith twisted twin flexible cordof minimum size 16/1 . Inspection by- Consignee. | Numbers 150.00 | — | 2,638.37 | 3,95,755.5 |
| 57 | S u p p l y , fi x i n g , t e s t i n g , connecting andcommissioning of 24/36 watt 2x2 LEDlights fittings a s p e r IS:10322 , recessLED Fitting 2 4 / 3 6 watt, suitable forsurface/ recessed m o u n t i n g . LEDLuminaries:-(1) A complete LEDlighting unit consisting of a lightsource and driver together with partsof distribute light, to p o s i t i o n andprotect t h e l i g h t s o u r c e , and t o c o n n e c t t h e l i g h t s o u r c e t o a branch circuit.The light source i t self may bea n LED array a n d L E D module, o r a n L E D lamp.(2):- Supplied LEDluminaries s h a l l confirm toIS:16101(2012) IS :16106 (2012).Light Source (LED) in the Luminariesshould be of make:- (1):- NICHIA/CREE/ OSRAM/ S E O U L / P H I L I P S / L U M I L E D S / L E D N I U M . ( 2 ) : - L E D s to IS:16105(2012). IS:16108(2012), IEC:62471. 1. Inputoperating volta ge : 105-295 V AC.2:- N o r m a l Vo l t a g e - 2 2 0 V A C . 3 . Drivertype: constant current d r i v e r w i t h s h o r t circuit protection. 4.Control ofdistribution:- Full cut off. 5 . Lumens-2880/4320 . 6 . E ffi c i e n c y of driverelectronic: > 85%. 7. Colourtemperature:4000K. 8.Colourrendering index (CRI):>75. 9. Ingressprotection : IP-20. 10.Lumen output:>=120 lumens/ watt @ Max. 350 mAdrive current. 11. Power factor:->0.97. 1 2 . Total harmonics distortion(THD):-<20%. 13.Lamp c o v e r :Acryliccover whichdoes not r e s u l t i n l o s s o fl u m e n s . 1 4 . Finishing: P o w e r c o a t e d / A n o d i z e d . 1 5 . Secondry optics:poly carbonate reflector/ polycarbonate l e n s . 1 6 . Construction ofhousing: extruded aluminum/CRCA/Pressure d i e c a s t aluminum. 17.Mounting: Suitable for surfacemounting/ r e c e s s e d m o u n t i n g . 18.Certificate:Firm to submit LM80 (Inrespect o f L E D used) & LM79 (Inrespect of luminare used) testcertificate from National/Internationalaccredited Laboratory and OEMcertificate f o r c o m p l i e n c e of B I S / I E C . 1 9 . W a r r a n t y : F i r m t o submit warrantycertificate f o r fi v e y e a r a l o n g with thesupply. All fittings shall be fitted assurface mounting/recessed mountingwith twisted twin fl e x i b l e c o r d o f m in im u m s i z e 1 6 / 0 . 2 mm copperconductor a s per relevant t e c h n i c a l s p e c i fi c a t i o n . Material parametersmust remain unchanged during entirewarranty period. Inspection by-Consignee | Numbers 25.00 | — | 1,474.65 | 36,866.25 |
| 58 | Supply and instalation of 1-phase 5 KVA, 120/96 Volt D C input UPS as per I S 16242/ IEC-62040 w i t h Battery B a n k o f 1 2 V , 1 0 N o s . tubular batteries h a v i n g e a c h capacity 1 5 0 A H for Emergency Supply. Inspection by-Consignee. | Numbers 4.00 | — | 1,22,110.8 | 4,88,443.2 |
| 59 | S u p p l y , e r e c t i o n , t e s t i n g , c o n n e c t i n g & commissioning o f 2 0 meter high mast system complete with all accessories 16 nos. luminaries o f 200W LED each Light, including making of f o u n d a t i o n a s p e r recommendation of manufactures along with required materials for making o f foundation and with feeder pillar including all accessories. 20 M high mast with its accessories M a s t s h a f t shall be hot dip galvanized (Single dip) comprising of polygonal pole andwelded base plate h o t d i p galvanized head framewith clamps, nuts & bolts for fixing sixteen luminaries and CG box etc. (01 Job) A rising & lowering mechanism with winch Lenten carriage head frame, S S wire, Ro p e cable & power tools with 1.5 HP motor. (1 Job). Supply, erection, testing, c o n n e c t i n g and commissioning of 1 6 nos. luminaries o f 200W LED including all accessories. (01Job). Supply of M 3 0 f o u n d a t i o n b o l t s o f s i z e - 8 5 0 mm manufactured from special steel C/W nuts, washers anchor plates & template f o r above mast including e a r t h i n g arrangement with electrode of 40 mm dia ""B"" class GI pipe of 3.0 mtrs long as per Drg. No. Sr. DEE/G/ALD 10/94. ( 0 1 Job). Construction o f s u i t a b l e shallow foundation w ith M 2 0 grade concrete for 20M highmast considering the SBC as 10/T sqmtr at 2 mtr depth with all materials & labour (01 Job). Supply of twin dome aviation observation light with 2Nos L E D array lamp. ( 0 1 set) Supply & installation o f separate control panel i n front offeeder pillar housing suitable control circuit with timer & AVR for the operation of the mast. It shall also consist o f suitable control f o r the power tool motors with suitable foundation. Inspection by- RITES. | Numbers 4.00 | — | 5,25,584.33 | 21,02,337.32 |
| 60 | Supply, fixing, testing and commissioning of surface mounted/flush type power unit complete with 4 modular plate, 25 A MCB, starter, plug & socket for AC. Inspection by- Consignee. | Numbers 40.00 | — | 654.47 | 26,178.8 |
| 61 | Supply, fixing, testing and commissioning of wall mounted distribution board (TPN MCB - Incoming & SP MCB - Outgoing), made up of steel sheet, phosphatised power painted complete with neutral link, earth point, Din rail conforming to IS:13032 & 8623 of reputed make with following items of matching make to be fixed in distribution board confirming to IS:8828 :1996 or latest, IE rules and site requirement. TPN MCB 63 Amps 10kA "C" series = 01 Nos. (incoming) SP MCB 6-32Amps 10kA "C" series= 18 Nos. (outgoing). Inspection by-Consignee. | Numbers 3.00 | — | 5,460.36 | 16,381.08 |
| 62 | Supply, fixing, testing and commissioning of DP RCBO's 10 (2P, 30 mA) Amp outgoing confirming to IS: 12640-2,IEC-61009-1 or latest. Inspection by-Consignee. | Numbers 5.00 | — | 2,520.12 | 12,600.6 |
| 63 | Supply, fixing, testing and commissioning of DP RCBO's 16 (2P, 30 mA) Amp outgoing confirming to IS: 12640-2,IEC-61009-1 or latest. Inspection by-Consignee. | Numbers 5.00 | — | 2,520.12 | 12,600.6 |
| 64 | Supply, fixing, testing and commissioning of DP RCBO's 20 (2P, 30 mA) Amp outgoing confirming to IS: 12640-2, IEC-61009-1 or latest. Inspection by-Consignee. | Numbers 5.00 | — | 2,520.12 | 12,600.6 |
| 65 | Supply, fixing, testing and commissioning of DP RCBO's 25 (2P, 30 mA) Amp outgoing confirming to IS: 12640-2, IEC-61009-1 or latest. Inspection by-Consignee. | Numbers 5.00 | — | 2,520.12 | 12,600.6 |
| 66 | Supply, fixing, testing and commissioning of DP RCBO's 32 (2P, 30 mA) Amp outgoing confirming to IS: 12640-2, IEC-61009-1 or latest. Inspection by-Consignee. | Numbers 5.00 | — | 2,830.19 | 14,150.95 |
| 67 | Supply, fixing, testing and commissioning of wall mounted/recessed LT Double door 4Way distribution board made up of steel sheet, phosphatised powder painted complete with neutral link, earth point, Din rail and prewired with following items to be fixed in distribution board and site requirement. Inspection by- Consignee. | Numbers 2.00 | — | 329.86 | 659.72 |
| 68 | Supply, fixing, testing and commissioning of wall mounted/recessed LT Double door 6Way distribution board made up of steel sheet, phosphatised powder painted complete with neutral link, earth point, Din rail and prewired with following items to be fixed in distribution board and site requirement. Inspection by- Consignee. | Numbers 2.00 | — | 498.08 | 996.16 |
| 69 | Supply, fixing, testing and commissioning of 380 mm sweep, 1400 rpm (approx) propeller type exhaust fan complete as per IS, IE rule & site requirement conforming to IS Specification. Inspection by-Consignee. | Numbers 5.00 | — | 3,265.19 | 16,325.95 |
| 70 | Supply, fixing, testing, connecting and commissioning of 300 mm sweep Exhaust Fan suitable for 230 volts, 50 Hz AC supply, 1400 RPM heavy duty with wiring and flexible PVC pipe as required. Inspection by-Consignee. | Numbers 5.00 | — | 1,565.53 | 7,827.65 |
| 71 | Supply, fixing, connecting and commissioning of Hot and cold split AC of capacity 1.5 Ton, Nominal Cooling Capacity (KCal/Hr): 6000 suitable for 230 volt, AC 1 Phase, Material for body of indoor unit: ABS, Min. Room Discharge Air flow (Cum/Hr): 700, Guaranteed Cooing Capacity (Min) KCal/Hr: 4275 Operation on ecofriendly refrigerant R-32 or R-410a, with wall mounting arrangement, confirming to IS:1391 Part-II with latest amendment up to dated Star Rating -5. Inspection by- Consignee. | Numbers 4.00 | — | 46,788.72 | 1,87,154.88 |
| 72 | Supply and laying of B class, 50 mm dia, GI pipe of for cable riser/road crossing as required and a s p e r r e l e v a n t t e c h n i c a l specification. Inspection by-Consignee. | Metre 110.00 | — | 115.9 | 12,749 |
| 73 | Supply, fixing, testing and commissioning of complite set aluminium die cost flange, corona and coupling to mount various type of fixure with 30 mm steel single bent pipe . Inverted of p o s t t o p mounting i s possible . Suitable for classic steel pole .Inspection by-Consignee. | Numbers 20.00 | — | 6,350.73 | 1,27,014.6 |
| 74 | Supply and erection with proper foundation Victoriya bollards aredecorative cost iron ornamental bollards with medium pumkins. The bollards are painted with black PU paint. 18 to 26 watt retrofit LED lamp with transparent/Milky glass.Inspection by- Consignee. | Numbers 25.00 | — | 3,983.26 | 99,581.5 |
| 75 | S u p p l y o f A u t o c h a n g e O v e r p a n e l forCLS 1 0 K V A 6 0 A / 6 3 A c a p a c i t y as perRDSO specificationno.TI/SPC/PSI/CLS/0023. Inspection by-Consignee. | Numbers 2.00 | — | 32,958.89 | 65,917.78 |
| 76 | Erection, Testing commissioning of Autochange Over panel for CLS 10KVA60A/63A capacity as per RDSOspecification no.TI/SPC/PSI/CLS/0023. | Numbers 2.00 | — | 1,658.32 | 3,316.64 |
| 77 | Supply, installation, testing and commissioning o f 6 3 A M P M C C B 35KA, 240V, 5 0 H Z with suitabledistribution b o x o f IP-65 o f size 300x 300x 170mm.Inspection by-Consignee. | Numbers 2.00 | — | 5,996.35 | 11,992.7 |
| Schedule total | ₹1,29,18,268.54 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .