Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.3 LAccepted-AOC | L1 | Accepted-AOC AWARD OF CONTRACT | |
| 2 | L2₹32.6 L+₹2.3 L (7.44%)Rejected-Finance 1ST FLOOR PRABHA SHOPPING COMPLEX OLD PAHARGAON DOLLYGUNJ PORT BLAIR SOUTH ANDAMAN ANDAMAN NICOBAR 744103 UDYAM AN 01 0000143 | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744103 | L2 | Rejected-Finance Being not the lowest | |
| 3 | L3₹36.1 L+₹5.8 L (19.0%)Rejected-Finance 254 MG ROAD LAMBA LANE JUNGLIGHAT PORT BLAIR SOUTH ANDAMAN ANDAMAN AND NICOBAR ISLANDS 744103 | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744103 | L3 | Rejected-Finance Being not the lowest |
Tender Value
₹38.5 L
EMD Value
₹77,000
Closing Date
14 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer (P) North
GE (P) North, Port Blair
PROVISION OF DUG WELL AT OTM COMPLEX, VIJAY NAGAR HUT BAY
2023_MES_598997_2
8152/E8
Open Tender
Civil Works
Item Rate
180 days
GE (P) North, Port Blair (Hut Bay
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Garrison Engineer (P) North
₹77,000
Yes
26 Aug 2023
24 Jul 2023
21 Aug 2023
24 Jul 2023
14 Aug 2023
31 Jul 2023
24 Jul 2023 - 30 Jul 2023
Amount
Site clearance in soft / loose soil complete all as specified and directed.
Rough excavation not exceeding 1.5 m deep and getting out in soft / loose soil complete all as specified and directed.
Excavating over areas, exc 1.5 m deep and not exceeding 3 m deep and getting out in any type of soil complete all as specified and directed.
Excavating over areas, exc 3 m deep and not exceeding 4.5 m deep and getting out in any type of soil complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.
M&L for PCC 1:3:6 type D2 using 40mm graded aggregate as in foundation filling and mass concrete complete all as specified and directed.
Pre-cast Type C1 1:3:6, 20 mm graded aggregate cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar CM 1:4 complete all as specified and directed.
M&L for 15 mm thick rendering on fair surfaces of block masonry in CM 1:4 complete all as specified and directed.
M&L for prepration of newly plastered surfaces and applying two coats of cement base paint complete all as specified and directed.
M&L for TMT bars 5 to 10mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L for RCC (Nominal Mix) type B1 (1:2:4) using 20mm graded aggregate in beams, cantilevers, bressummers , lintel ,wall band etc complete all as specified and directed.
M&L for fair finished surfaces curved Formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC / PCC bands in walls complete all as specified and directed.
M&L for hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
S&F framed work such as grills, gratings, etc.. with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.
S&F rolled sections Fe- 290 (Gde E- 165) as in main and cross beams, fixed with angle cleats or other connecting plates complete all as specified and directed.
M&L for PCC 1:2:4 type B1 using 20mm graded aggregateas in coping finished fair and even complete all as specified and directed.
M&L for MS work such as rungs, handles to wall, etc. complete all as specified and directed.
Supply, Installation, testing & commissioning centrifugal monoblock pumping set for head 22m and discharge capacity of 980 LPM, 3 Phase, 415 V, electric driven, 3000 rpm, harizontal suction, cast iron body with steel shaft, including foundation as per the OEM recommendation and connecting with inlet outlet, including aluminium alloy sheet cover with handle to protect over the pump sets of suitable size complete all as specified and directed. Make: Kirloskar, KDS830+ +
Supply and fix 80mm dia cast iron foot Valve conforming to IS 4038 complete all as specified and as directed.
Supply and fix 80 mm dia cast iron reflux valve, with by-pass arrangement complete all as specified and as directed.
Supply and laying GI Pipe of size 80 mm, medium grade including fittings in trenches complete all as specified and as directed.
Supply and laying GI Pipe of size 50 mm, medium grade including fittings in trenches complete all as specified and as directed.
Supply and laying GI Pipe of size 40 mm, medium grade including fittings in trenches complete all as specified and as directed.
Supply and laying GI Pipe of size 25 mm, medium grade including fittings in trenches complete all as specified and as directed.
Supply and fix sluice valve of size 80 mm dia confirming to IS, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed with suitable reducers complete all as specified and directed.
Supply and fix stop valve of size 25 mm dia confirming to IS, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed with suitable reducers complete all as specified and directed.
Supply, installation, testing and commissioning outdoor LT feeder Distribution Panel suitable for 3 phase, 4 wire, 415 volts to Hz supply system with suitable size and powder coating, dust/vermin proof. The panel shall CPRI approved factory fabricated made with 3.15 mm thick CRCA sheet for outer shell and inner shell made out of 2mm thick CRCA sheet, double door with front and back openable with locking arrangement, provision of thereaded earthing stud at bottom, inner shell completely vermin proof and to accommodate incoming / outgoing MCCB, MCBs, change over switch and TPN Aluminium bus bar of rating 1.5 Times of Incomer MCCB and extension links of rating not less than 1.5 times the rated capacity of the respective MCCBs. The TPN busbar and extensions link shall be insulated with colour coated heat shrinkable sleeves and shall be mounted on epoxy resin insulator. The MCCB shall be provided with copper Spreader link of suitable rating. All control wires shall be with 2.5 sqmm multistanded copper conductor wire and shall be properly bunched, tied ferruled for proper identification and crimped with suitable size of lugs. The panel shall be mounted on 50x50x5mm angle iron stand of height 45cm above ground level and 45cm embedded in ground, danger notice plate having conventional symbol of bone and skull be provided. The panel shall be consist of the following accessories:- (i) MCCB 4 Pole 63 Amp 50 Hz, 415 V , 35 kA - 1 Nos, (In commer). (ii) MCB 4 Pole 16 Amp, 50 Hz , 415 V, 25 kA, - 3 Nos ( for pumps - 02 & spare 01). (iii) Provision of starter - 02 No for 7.5 HP Pump Set (iv) Indicating lights R, Y, B all as specified and directed.
M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of earth plate not less than 1.5m below normal ground level, including provision of GI earth strip 32x6 mm as earthing lead connected by means of bolts, nuts, check nuts and washers of galvanized iron or steel, provision of 40mm dia GI pipe medium grade for GI strip protection connected from earth plate electrode to main switch board, provision of 20mm dia GI pipe medium grade for watering arrangement and PCC 1:3:6 type C1 chamber, MS funnel, wire gauge, 50mm thick RCC 1:2:4 type B1 for earth pit cover with 6 Nos x 8 mm dia high strength deformed steel TMT bars on both ways, including necessary excavation in any type of soil, returning, filling in, removal of surplus soil to a distance n.exc. 50m, provision of charcoal and salt complete all as shown in electrical plate No.3 of Schedule Part-I 2009 all as specified and as directed.
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core all as specified and as directed.
Excavation in trenches not exc 1.5 mtr wide & not exc 1.5 mtr in depth & getting in soft/ loose soil complete all as specified and directed.
M&L for river sand/ stone dust/ robo sand in trenches as sand cushioning to UG cable including spreading levelling and consolidation complete all as specified and directed. (Note:- Cosolidated sand thickness are to be measured).
M&L for unreinforced precast concrete cable cover class LV type 1 flat of size 250x150x40 mm all as specified and as directed.
Island Agency
Kakolil Trade Agencies
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .