Balance work of FOB at Delhi Inderpuri Halt in the section of SSE/W/HNZM under ADEN/HNZM.

Item rate for P&F encapsulated retro-reflective signage boards sigle / both sides as per design to be made out of 2mm thick alluminium sheet, face to be fully covered high intensity 1 encapsulated loose type heat activiated rectro reflective sheeting with messages in similar sheeting in colour scheme as approved by site engineer in-charge. The rectro reflective sheeting should be adhered to base substrate by heat lump vacum application. The signages are to be provided with back support frame made of M.S.angle iron of required size. The signages are to be fixed on the provided structures.

Item rate for hiring of pneumatic drill for demolition of CC block, washable apron or 2 any other hard structure complete rate including all ascent, descent crossing of drains, nallah, track and other obstacles including cost of diesel, petrol operator and other incidental charges complete job in all respect, so nothing extra shall be paid whatsoever the case may be

IR for rebate for dismantling steel structure like MS, OH tanks, shed, steel truss, 3 plate, girders etc. the rate includes all labour , loading and disposal of released material, the dismantling work shall be executed without disturbing the existing structure and ensure proper safety precautions at site during the dismantling and leading the released material. All dismantled/ released material will be property of the contractor.

Item Breakup - A-DSR-2021 Items

Item Breakup - B-USSOR-2021 Items

200.00 minimum 1.10 cum bucket capacity Total 171738.00 All items under chapter No.4 i.e. Chapter of Bridge Works- Super Structure (Steel) of NR/DLI USSOR- Item- 2 2021 edition(Corrected upto date) complete for all L&M as per Indian Railways Unified standard Specifications (Formation works, Bridge works & P.Way works) (Corrected upto date). S No. Item Description of Item Unit Qty Rate Amount No DELHI DIVISION-ENGG/NORTHERN RLY Supplying, fabrication, assembling of all types of steel girders of specified spans with structural steel conforming to Quality "B0" Grade Designation E250 conforming to IS:2062, erection / slewing / end launching of steel girders with cranes or any other approved launching methods as per site conditions (not requiring traffic block) on sub- structure including provision of trolley refuges etc., complete as per approved Q A P and drawings conforming to IRS-B1-2001 and other relevant codes and specifications. Note: 1. Detailed fabrication and erection drawings & launching methodology will be prepared by the contractor and got approved from Railway. 2. The rate is all inclusive including launching in position, complete in all respect except cost of (i) Painting / Metalising; (ii) Bearings & (iii) HSFG bolts which shall be paid extra under relevant item. 3. The payment shall be made on the theoretical weight of main components and gusset plates only. 4. Payment Schedule: (i) Receipt of material at site: 40% (ii) Fabrication of girders: 20% (iii) Erection/Launching: 20% (iv) Completion in all respects: 20%

126.00 159122.64 Girder (Steel Work)

2441.00 any length with suitable nuts including DTI washers conforming to IRS-B1-2001 for bridges a n d steel structures with contractors labour, tools and plants and lead and lift etc., complete. Metallizing of steel work of girders with sprayed aluminium after surface preparation by Sand/grit blasting, followed by one coat of etch primer (IS:5666) & one coat of Zinc Chrome primer (IS:104) and two coats of aluminium paint (IS:2339) with all labour, T&P and material as a complete job duly conforming to all relevant specifications and process given under Clause 39 of IRS-B1-2001. Note: Nominal Thickness of sprayed Aluminium coating shall be 150 microns. DFT of Zinc chrome primer shall be 25-30 microns and DFT of each coat of Aluminium paint shall be 12-14 microns.

Sqm Providing road crane of specified lifting capacity with specified jib length revolving type for material handling, assembly & erection of girders/slab/RCC Box etc.

Day DELHI DIVISION-ENGG/NORTHERN RLY

45.00 129732.28 and/or bolted and/or riveted steel work in built up sections, trusses and framed work, staging, racks, Height Gauge etc. for Steel Structures other than bridge girders, using RSJ, tees, angles and channels/flats, plates, gussets, round or square bars, cleats, bolts etc., with contractors own steel including cutting, bending, straightening, drilling, riveting, hoisting, fixing, erecting, welding, bolting etc., with Providing stiffeners wherever required as per approved drawing including applying a priming coat of a approved steel primer with all contractor's materials, labour, tools & plants, lead & lift including crossing of tracks if required etc., complete as per specification and as directed by Engineer-in-charge. Note: The payment shall be made on the theoretical weight of main components and gusset plates only. Total 28847332.04