Brand Type Unbranded

M and L FOR 75mm thick cement concrete type D 2 1.4.8 (40mm graded aggregate) etc complete all as specified.

M & L for 100 mm thick, Cement concrete type B 2, 1.2.4 (40mm graded aggregate), etc completed all as specified.

Cement concrete (1.2.4) type B-0 using 12.5mm graded stone aggregate as in coping including necessary formwork complete all as specified.

Chequered cement concrete tiles 30cm x 30cm x 25mm thick in floors path set, jointed & pointed in neat cement slurry using grey cement and no pigment laid over and including 15mm thick screed bed in cement mortar (1.6) including necessary cutting as per site requirement complete all as specified.

Providing and laying at or near ground level factory made kerb stone of M 25 grade cement concrete in position to the required line , level and curvature,jointed withcement mortar 1.3 ( 1 cement 3 coarse sand ) , including making joints with or without grooves ( thickness of joints except at sharp curve shall not to more than 5 mm) , including making drainage opening whereever required complete.

Providing and laying 60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour , design & pattern as in footpath , parks , lawns,drive ways or light traffic parking etc. of required strength , thickness & size/shape, made by table vibratory method using PU mould , laid in required colour & pattern over and including 50 mm thick compacted bed of fine sand , compacting and proper embedding/laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator,filling joints with sand andcutting of paver block as per required size and pattern,finishing and sweeping extra sand.

Providing and laying 80 mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour , design & pattern as in footpath , parks , lawns,drive ways or light traffic parking etc. of required strength , thickness & size/shape, made by table vibratory method using PU mould , laid in required colour & pattern over and including 50 mm thick compacted bed of fine sand , compacting and proper embedding/laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator,filling joints with sand andcutting of paver block as per required size and pattern,finishing and sweeping extra sand.

Demolition of cement concrete (unreinforced) in ground floors and pavings not excceding 15cm thickness (above or below ground level) all as specified.