Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹8,700
Closing Date
29 Oct 2026, 3:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Executive Engineer PWD
Executive Engineer PWD Buildings Construction and Maintenance Division Chengalpattu - 603 001.
Special Repairs to damaged Roof Finish, Joineries and other repair works for Primary Health Center at Padalam in Chengalpattu District.
2026_PWD_714142_1
03 CPT / 02 / 2026-27
Open Tender
Civil Works - Buildings
Percentage
Chengalpattu
Please refer Tender documents.
6 documents required · 6 mandatory
₹0
₹8,700
15 Oct 2026
15 Oct 2026
29 Oct 2026
15 Oct 2026
29 Oct 2026
15 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Dismantling, clearing away and carefully stacking materials useful for reuse the existing Brick / stone masonry in Cement Mortar walls under 3m wall high etc., complete and as directed by the departmental officers. | 0.5 | m3 | 302.96 | ₹151.48 |
| 2 | Dismantling, clearing away and carefully stacking materials useful for re-use of any thickness of Floor Finish and Dadooing walls in cement mortar with mosaic tiles / glazed tiles / cuddapah slab etc., complete. | 189.5 | m2 | 27.31 | ₹5,175.25 |
| 3 | Clean removal of Cement plaster from walls etc., complete and as directed by the departmental officers. | 33 | m2 | 9.06 | ₹298.98 |
| 4 | Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by the departmental officers. | 33 | m2 | 287.04 | ₹9,472.32 |
| 5 | Plain Cement Concrete 1:2:4 (One Cement, Two Crushed Stone Sand and Four Hard Broken Stone Jelly) using 6-10mm ISS metal jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed from the departmental officers.- Mixing by manual means | 12.1 | m3 | 6,080.71 | ₹73,576.59 |
| 6 | Supplying and fixing Stainless Steel (Salem Stainless Steel) Door Frame - Box Section using Stainless Steel Plate with following thickness with the size of 100mm x 60mm with a rebate of 30 / 35mm x 15mm on one side of the frame including supplying and fixing dovetail splayed end stainless steel Hold fast etc including dismantling, making necessary chipping and holes in RCC columns, walls with power drills to the extent required ,including providing concrete 1:2:4 inside the box curing etc complete complying with standard specification and as directed by the departmental officers - SS Door Frame with thickness of 1mm/1.60mm. | 52 | Rm | 1,025.92 | ₹53,347.84 |
| 7 | Repairing and refixing the existing steel Glazed windows (Three Leaves) by removing the steel windows by repairing and refixing the windows replacing by new 3mm pin headed glass, teakwood beading and steel handles labour charges for removing and refixing the steel windows in its original position etc., complete and as directed by the departmental officers. | 22.25 | m2 | 670.65 | ₹14,921.96 |
| 8 | Supplying and fixing of MS grill of approved desgin for grill gate grill works to doors and windows opening ramp etc using necessary mild steel for inner and outer members which should be fixed on edges including priming coat of best approved quality red oxide primer etc., complete and as directed by the departmental officers. | 111 | Kg | 107.81 | ₹11,966.91 |
| 9Supplying and fixing Solid Core flush shutter of following type with thickness with necessary T.W. internal lipping alround conforming to IS 2202-1(1999) including cost of wind appliances and furniture fittings such as 6 Nos of SS 304 Grade Parliament Hinges of Size (125mm x 150mm), 3 Nos. 300x12mm aluminium tower bolt 1 No. 200x12mm aluminium tower bolts 1no. 250x16mm aluminium aldrops, 3 nos. 200mm ‘D’ type aluminium door handle and door stopper with bush etc., complete complying with standard specification and as directed by the departmental officers. | |||||
| 9.01 | Single leaf | 13.9 | m2 | 4,089.18 | ₹56,839.6 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.64 MB
BOQ_857919.xls
BOQ • 0.27 MB
ETN0302.pdf
Tender Documents • 0.58 MB
GeneralCondition.pdf
Additional Documents • 0.49 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .