Supply erection and commissioning of New Pump for flood protection works Rd 31000-L of KahanaurDisty in W.S Mech Division

Amount

upply, Erection & Commissioning of 10 C/s axial/Mix Flow Water lubricated Vertical Pumps of 10 Cs. Discharge at 1440 RPM at static head of approx 6.0 Mtr. with Y body, including MS Bend including flange welding,Strainer, SS Nut & Bolts etc, replacement of old girders with civil work complete in all respect as per site requirement with epoxy coating & as per approved spec. of the department

Supply, Erection & Commissioning of solid shaft Motor of capacity 60 HP, 1440 rpm, 3 Phase, 415 Volt+- 10%, with eficiency class IE2 suitable for fitment with 10 Cs. V.T axial/mix flow pump type vertical flange mounted as per approved specifications of the department

Supply, erection and commissioning of LTDB of 400 Amp. Capacity including att accessories as one incomer of MCCB (400 Amp. ) with 2 No. outgoing of 250 Amp & 1 No. outgoing of 150 Amp. MCCB and 63Amp MCB for lighting loads indicators, relays, meters, push buttons, bus bars etc. suitabte for operation of 2 No. motors of 60 HP & 1 No. motors of 30 HP capacity with a stand of MS channel (1' up from floor) including cable required from LTDB to starter as per site requirement & as per approved specifications of the department.

Supply, Erection & Commissioning of fully automatic ATS Starter suitable for 60 HP motor with suitable contactor for main transformer/star, interlinking busbar of suitable size complete in all respect with degree of protection IP-54 complete with small items like air coolerd ATS, Thimbles, nut bolt, lugs, etc with capacitor bank 12 KVAR, outgoing indicator, having MPR & all types of protections i.e.UV/OV/ over current, phase imbalance/phase reversal protection, locked rotor, dry run etc, Digital meters, Push buttons, bus bars, capacitor bank, seperate relay for single Phase protection etc. complete in all respect with 3 phase submersible Cu cable of suitable size from starter to motor & LTDB to starter suitable for open fields operation of 1 No. Motor of capacity of 60 HP with a stand of MS channel with canopy having suitable operating height above the kachha/Pakka fioor as per approved specifications of the department.

Supply, Erection & Commissioning of M.S delivery Pipe 258.9 mm inner dia.made of MS Plate both end flanged (in >= 6 Mtr Pieces) as per approved specification & Make. (Including SS Nut & Bolt, Rubber packing & other fitment accessory required)

Supply, Erection & Commissioning of M.S delivery Pipe 341.4 mm inner dia both end flanged (in >= 6 Mtr Pieces) as per approved specification & Make. (Including SS Nut & Bolt, Rubber Sheet 1/8" & other fitment accessory required)

Supply, Erection & Commissioning of M.S delivery Pipe 20" dia both end flanged (in >= 6 Mtr Pieces) as per approved specification & Make. (Including SS Nut & Bolt, Rubber Sheet 1/8" & other fitment accessory required)

Providing complete double side chemical earthing or plate earthing with 2 earth pits on both sides of Sump Well by boring & lowering 1.5" GI pipe, filling boring with charcoal, copper strips, salt & fixing base plate or chemical earthing & connecting this main earthing through copper strips /wires up to motors & panel confirming to IS-3043 & as per site requirement.

Providing & laying LT Armoured PVC aluminium cable of size 185 sq. mm, 3 ½ core conforming to IS 7098 -1985 as per approved makes.

M/s KRP Engineering Pvt. Ltd.