WBPWD/AE/KMCESD/NIQ-136/24-25

Amount

A. Distribution wiring: Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Make: R.R Kable / Polycab / Havells/Glostar/KEI) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. Bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. 175mmx100mmx65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish.

A)Average run 8 mtr. [2(c)/E-14]

B) Average run 10 mtr. [2(e)/E-14]

C) Average run 12 mtr. [2(g)/E-14]

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Make: R.R Kable / Polycab / Havells/Glostar/KEI) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required. [1(a)/E-14]

2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

2 x 36/0.3 (4 sqmm) + 1 x 22/0.3 (2.5 sqmm) ECC

2 x 36/0.3 (6 sqmm) + 1 x 22/0.3 (4 sqmm) ECC

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. [9/F-9] .

Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make]on wall, ceiling with saddles and other accessories as required and mending good damages to building works. [7/E-16]

20mm size

25mm size

Fixing of existing dismantled pvc rigid conduit pipe with precession made saddle on wall/ ceiling.

B--BDB,PDB,VTPN ETC Supplying and fixing 415V, TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. (Make-L&T/Schneider/ABB/Siemens)

Supplying and fixing 415 V Four Pole MCCB of Breaking capacity 25kA/35kA in existing Vertical DBs including necessary connection as per GS (Make-Legrand/L&T/Schneider/ABB/Siemens).

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection as perGS (Make-Legrand/L&T/Schneider/ABB/Siemens)

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connections per GS (Make-Legrand/L&T/Schneider/ABB/Siemens)

Fixing only SPN MCBDB (4 to 16 way) on flat iron frame on wall [3/C-1]

Fixing only TPN MCBDB in Sheet Steel enclosure (4 to 12 way) on flat iron frame on wall. [4/C-1]

C. Plug , Sockets & Board:--- Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Make: R.R Kable / Polycab / Havells/Glostar/KEI) to 240 V 6A 5 pin plug point incl. S&F 240 V 6A 3 pin type plug socket & switch (Anchor) as per gs [4(a)/E-15].

On Board

Supply & Fixing 240V, 2 nos. 6A Piano Key socket and switch (MK: Anchor) on sheet metal switch board concealed in wall incl. S & F 175 x 100 x 65mm MS (16SWG) switch board and Bakelite/Perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting Bakelite/Perspex cover, incl. Ph, N, E Cu Bar and making necessary connections as required as to GS.[10(b)/E-4 + {2x(14(a)/E-5)}+{2x(15(a)/E-5)}].

Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket (MK: Anchor) with separate 3 nos. 6 A & 1 no. 20A Piano key type switch with indicator & 16A SPMCB (Brand : Havells) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and Bakelite/Perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting Bakelite/Perspex cover and making necessary connections as required [25/E-7].

Supply & Fixing 240V, 20A, plug socket with separate 20 A Piano key type switch (Anchor) and 1 no. 6A Piano Key socket with switch on sheet metal switch board concealed in wall incl. S & F 200 x 150 x 65mm MS (16SWG) switch board and Bakelite/Perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting Bakelite/Perspex cover, incl. Ph, N, E Cu Bar and making necessary connections as required as to GS.[10(c)/E-4 + 14(a)/E-5 + 15(a)/E-5 + 14(b)/E-5 + 15(b)/E-5 ]

Supplying & Fixing CRC sheet metal (16 SWG) JB-cum- Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on Bakelite/Hard Rubber insulator over the MS welded chairs incl. Bakelite /Perspex /coloured Perspex (wall matching colour) top cover 3 mm thick flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works. [10/E-4].

150mmx100mmx65mm

200mmx150mmx65mm

175x100mmx65mm

240 mm x 200 mm x 65 mm

Supplying & Fixing sheet metal inspection box (16 SWG) of the following sizes flushed in wall by housing the same after cutting brick wall incl. making earthing attachment, painting and mending good damages to building works. [11/E-4]

150 mm x 100 mm x 65 mm

175 mm x 100 mm x 65 mm

200 mm x 150 mm x 65 mm

Supply & Fixing Bakelite / Perspex top cover on existing switch board by Brass screws after making housing for switch by cutting Bakelite / Perspex cover and making necessary connections as required. [12/E-4]

150mmx100mmx65mm

200mmx150mmx65mm

175x100mmx65mm

100mmx100mmx65mm

240mmx200mmx65mm

Supply & Fixing 240 V 6 A Piano key type switch (Make-Anchor penta/ Havell's Reo) on existing sheet metal switch board having Bakelite/Perspex top cover by screws after making housing for switch by cutting Bakelite/Perspex cover and making necessary connections as required. [14(a)/E-5].

Supply & Fixing 240 V 16/20 A Piano key type switch (Make-Anchor penta/ Havell's Reo) on existing sheet metal switch board having Bakelite/Perspex top cover by screws after making housing for switch by cutting Bakelite/Perspex cover and making necessary connections as required.[14(b)/E-5]

Supply & Fixing 240 V, 6A plug socket (Make-Anchor penta/ Havell's Reo) , without switch & plug top, on existing sheet metal switch board with Bakelite/Perspex top cover by screws after making housing for plug by cutting Bakelite/Perspex top cover and making necy. connections with PVC wire and earth continuity wire etc. [15(a)/E-5]

Supply & Fixing 240 V, 20 A plug socket (Make-Anchor penta/ Havell's Reo) , without plug top and switch, on existing sheet metal switch board with Bakelite/Perspex top cover by screws after making housing for combined plug switch by cutting Bakelite/Perspex top cover and making necy. connections with PVC wire and earth continuity wire etc.. [15(b)/E-5]

Fixing only fan regulator on existing sheet metal switch board with Bakelite/Perspex top cover by screw after making housing for regulator knob by cutting Bakelite/Perspex top cover incl. making necy. connections etc. [19(a)/E-6].

Supply & Fixing Socket type fan regulator (Step type)(Make-Anchor penta/ Havell's Reo) on existing sheet metal switch board with Bakelite/Perspex top cover by screw after making housing for regulator knob by cutting Bakelite/Perspex top cover incl. making necy. connections etc. [18(a)/E-6]

D. Supply of cables :--- Supplying and Delivery of following sizes Al. armoured PVC/XLPE cable (make-- Havells/Gloster/KEI/Polycab/RR kable) as mentioned below :

4 core 35 sqmm

4 core 25 sqmm

E. Laying of cables :--- Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire , making holes etc. as necy. mending good damages and painting. [2(b)/F-1]

Laying of cable from 3/3½ core 35 sqmm to 50 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting. [2(c)/F-1]

Laying of cable from 3/3½ core 50 sqmm to 95 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting. [2(d)/F-1]

Laying of cable above 3½ core 90 sqmm and upto 3½ core 150 sqmm on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. As necy., mending good damages and painting

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : vide pg no F-4 item no. 7.C

4 core 35 sqmm

4 core 25 sqmm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solder less socket (Dowels make), tapes, anticorrosive paste & jointing materials . vide pg no F-5 item no. 8a & 9 :

4 core 35 sqmm

4 core 25 sqmm

F. Fixing of Light Fittings :--- Fixing only single/twin fluorescent light fittings suspended 25 cm bellow the ceiling with 2 No. 20mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp (125mmx125mm) as per GS [17/C-2].

Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length as per G S Vide page no C2 Item no 16

Fixing only single /twin fluorescent light fitting complete with all accessories directly on wall /ceiling/HW round block and suitable size of MS fastener

G. Fixing of fans :--- Supplying & Fixing MS fan clam of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting – (As per Drawing no. 475 of PWD Specification Book – May 1991) [29/D-4].

Fixing only cabin fan on wall/ceiling by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter:

S/D 4feet single commercial LED type fluroscent light fittings (make-- Philips TMC 502 1xT-LED 22W/ CG Eco-I IGP161LT8-16 1XT8/Wipro WIO921208P/Bajaj BLRB-DB-118) complete with all accessories with 1X18/20 Wt LED tube lamp corresponding to(Make- Philips MAS LED Tube 1200mm 18W 865 T8 I, 2100lm/ Crompton LT8-20-865-(2) ULTRON/ Wipro LL13-181-65SESL1-G1/Bajaj BLRB 20W CW LED)

S/D 4feet twin commercial LED type fluroscent light fittings (make-- Philips TMC 502 2xT-LED 22W/ CG Eco-I IGP161LT8-16 2XT8/ Wipro WIO922208P) complete with all accessories with 2X18/20 Wt (Make-Crompton LT8-20-865-(2) ULTRON/ Bajaj BLRB-DB-118) LED tube lamp corresponding to (Make- Philips MAS LED Tube 1200mm 18W 865 T8 I, 2100lm / Crompton LT8-20-865-(2) ULTRON/ Wipro LL13-181-65SESL1-G1/ Bajaj BLRB 20W CW LED)

Special Terms and Conditions 1. It is stated that the above work place is existing COVID Hospital, In case of any mishap or accidental to any staff that deputed by the agency the whole responsibility is to be borne by the concern agency. 2. The Agency shall be responsible for provisioning of all COVID safety measures including regular sanitiziation of work places, vaccination of employees and compliance of stated directive and COVID appropriate norms. 3. All the issues related to the safety of the staffs should be taken care by the agency itself. (Defect Libilities period for 01 year from the date of completion of work) (Rate should be quotated including all taxes and duties)

A.K.ENTERPRISE (BID ID -6085445)

MOON LIGHT (BID ID -6080075)