Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.8 LAccepted-AOC | L1 | Accepted-AOC Successful bidder | |
| 2 | L2₹26.1 L+₹1.2 L (4.99%)Rejected-Finance | L2 | Rejected-Finance Not lowest tender |
Tender Value
Refer Docs
EMD Value
₹66,600
Closing Date
27 Jul 2023, 6:00 pmClosed
GE AF Sambra
GE AF Sambra ATS Sambra Belgaum 591124
REPAIR MAINTENANCE OF WATER PUMPING INSTALLATIONS WATER TREATMENT PLANTS PUMPING AND DISTRIBUTION PIPE LINES AT AIR FORCE STATION SAMBRA
2023_MES_606385_1
8789/E8
Open Tender
Civil Works
Item Rate
180 days
GE AF Sambra
Please refer Tender documents
8 documents required · 8 mandatory
₹500
GE AF Sambra
₹66,600
Yes
11 Sept 2023
28 Jun 2023
29 Jul 2023
28 Jun 2023
27 Jul 2023
14 Jul 2023
Amount
Excavation in trenches not exceeding 1.5 metre wide and mot exceeding 1.5 metre in depth and getting out in Hard/dense soil including making the bottom of trenches levelled for proper laying of pipe line, foundation etc or for shafts, cesspits, manholes, pier hole etc not exceeding 10 sqm on plan and getting out in Hard/dense soil as as specified and as directed.
Removing the excavated material not exc 50 M and depositing where directed at a level not exc 1.5 above the starting point in soil complete all as specified and as directed.
Returning and filling including spreading, levelling watering and well ramming in layers not exceeding 25 CM in soil complete all as specified and as directed.
Taking up Cast/Ductile iron water main of size any dia including all fittings for spigot and socket ends and lead joints including burning out lead joint and recovering lead complete all as specified as directed. Note :- Excavation earthwork shall be measured and paid seperately
Supply and lay Ductile iron pipe, spigot and socket with Rubber joints, class K-7, laid in trenches complete all as specified and as directed of following sizes:- Note :- (i) Excavation earthwork shall be measured and paid seperately. (ii) DI specials will be measured and paid seperately.
300 mm dia bore.
250 mm dia bore.
200 mm dia bore.
150 mm dia bore.
100 mm dia bore.
80 mm dia bore.
S & F Ductile iron fitting for spigot and socketted ductile iron pipe such as bend, tees, pieces, joint piece single branches, junction collar branches, cap plug etc for size 100 mm to 200 mm dia pipes complete all as specified and as directed.
All as per item No 06 herein before but exceeding 200 mm to 300 mm dia bore
M & L run lead jointing of Cast Iron pipes including necessary excavation and earth work as required for carrying out lead jointing for following size of CI pipes with spigot and socket ends complete all as specified and as directed :-
300 mm dia bore.
250 mm dia bore.
200 mm dia bore.
150 mm dia bore.
100 mm dia bore.
80 mm dia bore.
S & F Unplasticised PVC pipes for water supply of pressure rating 10 kgf/sqcm laid in trenches of following sizes all as specified and directed:-
50 mm dia bore
40 mm dia bore
25 mm dia bore
M & L Construction of brick massonry valve pit chamber of inner dimension 100x100x100 cms suitable for sluice valves upto 100mm size with following specification :- (i) Necessary earthwork excavation & 100mm thick PCC 1:4:8 type D-2 for foundation (ii) Brick work 230mm thick in cm 1:4 & plastering 15mm thick in CM 1:4 both side (iii) Coping 75mm thick in PCC 1:2:4 type B-1, incl necessary form work finished with 2 coats of cement base paint over a coat of self primer. (iv) MS sheet cover of thickness 3.15mm on 50x50x6.0 mm angle iron framework with 2 hinges 100mm size including two coats of synthetic enamelled paint over a coat of red oxide primer with making provision of locking arrangement (v) Demolition of old valve pit
S & F in repair Galvanised Iron tubing, medium grade with all new connections and fittings such as tees, bends, elbows, short pieces, connector back nuts, diminishing pieces, caps, plugs unions etc for following size of pipes complete all as specified and as directed :-
100 mm dia bore.
80 mm dia bore.
50 mm dia bore.
40 mm dia bore.
25 mm dia bore
20 mm dia bore.
15 mm dia bore.
S & F in repair gun metal globe or gate valve with iron wheel bead screwed both ends for iron pipe complete of following size :-
15 mm dia.
20 mm dia.
25 mm bore.
40 mm bore.
50 mm dia.
M & L Cutting the existing pipe and making new connection, screwing existing steel tubing for alteration or addition including all necessary fittings/fixtures and necessary excavation and earth work complete all as specified and directed for following :-
15 mm dia.
20 mm dia.
25 mm dia.
40 mm dia.
50 mm dia.
Taking down unserviceable GI pipe line / UPVC pipe line of following size from the trenches all as specified & directed. Note :- Excavation earthwork shall be measured and paid seperately
100 mm dia bore.
80 mm dia bore.
50 mm dia bore.
40 mm dia bore.
25 mm diabore
20 mm dia bore.
15 mm dia bore.
S&F in repair sluice valve class PN-I heavy duty with flanged ends having high stainless steel spindle , cast iron wheel duly marked with shut down and open direction confirming to IS-14846-2000 and fixing up by providing rubber insertion sheet,nut, bolt, washer etc complete of following sizes:-
80 mm dia CI sluice valves.
100 mm dia CI sluice valves.
150mm dia CI sluice valves.
200mm dia CI sluice valves.
250 mm dia CI sluice valves.
S&F in repairs Non return butterfly valves of size 150mm dia complete all as specified and as directed.
S&F in repairs Non return butterfly valves of size 100mm dia complete all as specified and as directed.
M & L Taking down the pump set from motor unit by disconnecting carefully and dismantling, opening complete pump set, cleaning, replacing of unserviceable parts such as gun metal bushes, rubber packing, M S Nut, Bolts, rubber coupling (spider), Air valve and other worn out parts etc and re-assembling, installing back on original position, testing for smooth running complete all as specified and as directed for following capacity of pumps :- Note :- Spare parts replaced shall be measured and paid separately
Centrifugal pump set of 30 HP capacity.
Centrifugal pump set of 20 HP capacity.
Centrifugal pump set of 15 HP capacity.
Centrifugal pump set of 10 HP capacity.
Centrifugal pump set of 7.5 HP capacity.
Centrifugal pump set of 5 HP capacity.
Submersible pump set of 10 HP capacity
Submersible pump set of 20 HP capacity
M & L Overhauling of motor unit, 3 phase, 415 volts by taking down, dismantling and opening completely, cleaning internal parts thoroughly, replacing minor parts such as nut bolts, washers, terminal plate, cable lugs and greasing including insulating materials, varnishing, heating, reassembling reinstalling and testing complete all as specified and as directed for the following capacity of motor :- Note:- Unit rate quoted shall be deemed to include for minor unserviceable parts as mentioned/ required for repairs. All other major spares as specified hereinafter will be measured and paid separately
Centrifugal pump set of 30 HP capacity.
Centrifugal pump set of 20 HP capacity.
Centrifugal pump set of 15 HP capacity.
Centrifugal pump set of 10 HP capacity.
Centrifugal pump set of 7.5 HP capacity.
Centrifugal pump set of 5 HP capacity.
Submersible pump set of 10 HP capacity
Submersible pump set of 20 HP capacity
M & L Rewinding electric motor by taking down, disconnecting cable connection, dismantling complete motor, removing burnt copper wire & rewinding with super enamel copper wire including E class insulating material, varnishing, heating etc, re-assembling, installing back on original position and testing for smooth functioning etc complete all as directed for the following capacity:- Note :- Unit rate quoted shall be deemed to be included S & F of minor parts as required . All other major spares as specified hereinafter will be measured and paid separately.
Centrifugal pump set of 30 HP capacity.
Centrifugal pump set of 20 HP capacity.
Centrifugal pump set of 15 HP capacity.
Centrifugal pump set of 10 HP capacity.
Centrifugal pump set of 7.5 HP capacity.
Centrifugal pump set of 5 HP capacity.
Submersible pump set of 10 HP capacity
Submersible pump set of 20 HP capacity
Supply and Fix in repair brass impeller set suitable for following capacity centrifugal pump set complete all as specified and as directed.
Centrifugal pump set of 30 HP capacity.
Centrifugal pump set of 20 HP capacity.
Centrifugal pump set of 15 HP capacity.
Centrifugal pump set of 10 HP capacity.
Centrifugal pump set of 7.5 HP capacity.
(f) Centrifugal pump set of 5 HP capacity.
Submersible pump set of 10 HP capacity
Submersible pump set of 20 HP capacity
Supply and Fix in replacement pump shaft suitable for centrifugal/ monoblock pump set for following capacity of motors complete all as specified and as directed.
30 HP to 20 HP Capacity
15 HP to 05 HP Capacity
Supply and Fix in replacement bearing suitable for centrifugal pump set of following capacity of pump set complete all as specified and as directed.
Centrifugal pump set of 30 HP capacity.
Centrifugal pump set of 20 HP capacity.
Centrifugal pump set of 15 HP capacity.
Centrifugal pump set of 10 HP capacity.
Centrifugal pump set of 7.5 HP capacity.
Centrifugal pump set of 5 HP capacity.
Submersible pump set of 10 HP capacity
Submersible pump set of 20 HP capacity
Supply and Fix in repair bush for main shaft drive suitable for pump set of following capacity complete all as specified and as directed.
Centrifugal pump set of 30 HP capacity.
Centrifugal pump set of 20 HP capacity.
Centrifugal pump set of 15 HP capacity.
Centrifugal pump set of 10 HP capacity.
Centrifugal pump set of 7.5 HP capacity.
Centrifugal pump set of 5 HP capacity.
Submersible pump set of 10 HP capacity
Submersible pump set of 20 HP capacity
S & F in repair Volt meter, 3 Phase, 0 to 500 Volt, complete all as specified and as directed.
S&F in repair Ammeter (Ampere meter), 0 to 500 Amps complete all as specified and as directed.
Supply and Fix in repair Cast Iron gland cap with gland rope including nut bolts, washers suitable for centifugal / mono block pump set to match with the existing for following capacity complete all as specified and as directed.
Centrifugal pump set of 30 HP capacity.
Centrifugal pump set of 20 HP capacity.
Centrifugal pump set of 15 HP capacity.
Centrifugal pump set of 10 HP capacity.
Centrifugal pump set of 7.5 HP capacity.
Centrifugal pump set of 5 HP capacity.
Submersible pump set of 10 HP capacity
Submersible pump set of 20 HP capacity
S&F in replacement Rubber coupling suitable for 10 HP to 30 HP pump set complete all as specified and as directed.
S&F in replair fully automatic star delta (FASD) starter type ML-3 including timer, over load relay, single phase preventor, required wiring etc complete all as specified and as directed.
All as per item No.27 herein before but type ML-2.
All as per item No. 27 above but type ML- 1.5
S & F in repair contactor, type ML-3, 230 Volts, 40 Amps complete all as specified and as directed.
S & F in repair contactor, type ML-2, 230 Volts, 32 Amps complete all as specified and as directed.
S & F in repair contactor, type ML-1.5, 230 Volts, 25 Amps complete all as specified and as directed.
S & F in replacement thermal timer, type GT 200, operation voltage 230 Volt, 5-10 Amp, 50 Hz complete all as specified and as directed.
S&F in repair MCCB Triple Pole 200 Amp capacity, 35 KA including replacement of worn out lugs, crimping with new lugs, connecting up complete all as specified and as directed.
S&F in repair MCCB Triple Pole 100 Amp capacity, 25 KA including replacement of worn out lugs, crimping with new lugs, connecting up complete all as specified and as directed.
S&F in repair MCCB four Pole 63 Amp capacity, 25 KA including replacement of worn out lugs, crimping with new lugs, connecting up complete all as specified and as directed.
M & L Pre-cast cement concrete 1:2:4, type B1, using 20mm graded stone aggregate as in solid block masonry exceeding 10cm in width and setting in CM 1:6 complete all as specified and as directed.
S & F in repair Foot valve ball type threaded with strainer of size 100 mm dia complete all as specified and as directed.
S&F in repair Foot valve ball type threaded with strainer of size 80 mm dia complete all as specified and as directed.
S & F Pressure gauge, stainless steel 4"dia, -1 bar to +1 bar pressure measurement connectted to suction side of pump set complete all as specified and as directed.
S&F Pressure gauge, stainless steel 4"dial, 0 bar to +16 bar pressure measurement connectted to delivery side of pump set complete all as specified and as directed.
M&L for cutting /breaking of cement concrete path or bituminous road of any thickness with or without reinforcement for taking up/down of GI/CI pipes and connection and making good to surface by PCC (1:2:4) type B1 using 20 mm graded stone aggregates complete all as specified as directed.
M/s.GOODWILL ELECTRICALS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .