PROVISION OF CHAIN LINK FENCING IN FRONT OF BLDG NO T 55 OF 110 INF BN TA MADRAS AND PROVISION OF 12x GEYSERS AND 12 x EXHAUST FAN IN SINGLE OFFRS ACCN AT FD REGT MADUKKARAI AND CERTAIN REVENUE AND MINOR WORK AT COIMBATORE UNDER GE WELLINGTON

Amount

Excavating in post holes (or similar holes) each in hard / dense soil not exceeding 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, all as specified and directed

PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundations of fencing post all as specified and directed.

Mild steel work as in posts, struts etc in fencing including cutting tops to shapes as directed, drilling holes, notching for wire, etc flat iron fillets (for securing wire mesh etc) including all necessary drilling bolting or reveting etc, and similar work confirming to Fe 290 Gde E-165 all as specified and directed.

Preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer all as specified and directed.

Supply only Chain link fencing including line wires, any mesh size and type of standards rails straining bolts, etc including provision of binding wire complete all as specified and directed.

Fixing only chain link fencing including line wire, any mesh, size and type to any type of strandard rails, straining bolts, etc including provision of binding wire, all as specified and directed.

Point wiring with multistranded copper conductor 1.5 sq mm nominal cross-sectional area single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No. in and including medium grade, PVC conduit and accessories on wall/roof/floor etc, ISI marked with mild steel/pressed steel sunken box (with earth dolly) duly painted with two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer internally. and two coats of black bituminous paint over a coat of red oxide primer externally, covered with 3 mm thick plastic laminated sheet cover for fixing of switches, (rates includes for cutting the existing wall for fixing box and making good as per existing surface with cement mortar and touching with existing colour of wall) socket and fan regulators etc, including PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth duly One Exhaust fan point controlled by one switch 5 Amp one way complete all as specified and directed

Switch Piano flush type single pole one way 5 Amp 240V, 50Hz AC, ISI marked all as specified and directed

Ceiling rose, surface bakelite, 65 X 50 mm two to three terminals ISI marked all as specified and directed

Exhaust fan, heavy duty 300mm sweep with louvers, 1400 RPM and connection up including provision of copper flexible 3 core cable of size 0.5 Sqmm and PVC connector block cutting holes into or through brick wall / stone masonry wall built in cement mortar approx 350mm in round with good surface and material in fixing or MS nut and bolts with check nuts duly welded a piece of MS rod / flat iron on head of bolts of size 10mm long 04 Nos for exhaust fan mounting and 8mm x 80mm long for fixing of exhaust fan louvers. After that repair the dismantled portion of wall with cement mortar 1:3 and match with existing surface and apply 3 oats of white wash/ colour wash as per existing wall if inside at house and applying two coats of cement base paint over a coat of primer at external wall of house (outside wall) all as specified and directed.

Water heater storage type, electric supplied and installed complete of capacity 25 ltrs grouting 04 Nos of M12 x 100 mm bolt with hole fasr welded on top of head of the bolts in stone / brick massionary wall with 1.4 CM and making good surface as per exising wall for water geyser all as speified and directed. Make : Havells GHWASESWH025 senzo and equivalent to crompton / V-Guard / Recold as approved by GE.

Gunmetal, globe or gate valves 15mm dia heavy duty conforming to IS-778 with iron wheel head, screwed both ends for iron pipe all as specified and directed.

Bib taps,15 mm bore chromium plated fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified and as directed.

PVC wire breaded heavy duty / cold water connection pipe with brass check nuts on both ends with PVC washer complete of suitable size of dia and 45 cms long all as specified and directed.

Tube medium grade galvanised of 15mm dia with all fittings, fixed to walls and ceilings or laid in floor complete with necessary clamps or saddles all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and getting out in hard / dense soil for laying of UG cables, etc all as specified and directed.

Removing excavated materials to a distance not exceeding 50mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point all as specified and directed.

Returning, filling in, spreading, levelling, watering and ramming in layers not exceeding 25cm in any type of soil all as specified and directed.

MCCB TPN 63 amps 25KA including termination with suitable legs all as specified and directed.

Supply & Laying XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cable heavy duty with aluminium conductor 1100 volts grade cross sectional area 50 Sqmm 3.5 core laid in trenches, walls, roofs complete all as specified and as directed.

Supply & Laying XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cable heavy duty with aluminium conductor 1100 volts grade cross sectional area 6 Sqmm 2 core laid in trenches, walls, roofs complete all as specified and as directed.

GI tubing 40mm dia bore light grade for protection of cable fixed in wall or laid in trenches including taking down existing tube all as specified and directed.

Cutting the existing bituminous surface road including returning filling in and making good with material and labour for PCC 1:3:6 type C1 using 20mm graded stone aggregate to match with the existing surfaces all as specified and directed.

Sand Cushioning to PVC cable with using "M" sand dry gently punning below / around cable all as specified and directed.

Burnt bricks sub class B of old size laid dry in trenches for cable protection all as specified and directed.

Air cooled split unit Air Conditioner electric driven, single phase of capacity of 1.5 TR, BEE 5 star rated all as speified and directed.

Voltage stablizer 4 KVA, 240 volts all as specified and directed. Make : V-Guard/ Microtech or equivalent as approved GE

KUMAR AGENCIES

p.chinnasamy