Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L11₹29.2 LAccepted-AOC LODHI NAGAR NEAR TEACHERS COLONY GALI NO 4 MAHOLI ROAD MATHURA U P 281004 | MATHURA | MATHURA | UTTAR PRADESH | 281004 | L11 | Accepted-AOC ACCEPTED | |
| 2 | L2₹30.6 LRejected-Finance | L2 | Rejected-Finance NOT LOWEST BIDDER | |
| 3 | L3₹37.0 LRejected-Finance | L3 | Rejected-Finance NOT LOWEST BIDDER | |
| 4 | L4₹37.9 LRejected-Finance B 68 MOTIKUNJ MATHURA 281001 UP | MATHURA | UTTAR PRADESH | 281001 | L4 | Rejected-Finance NOT LOWEST BIDDER | |
| 5 | L5₹40.0 LRejected-Finance | L5 | Rejected-Finance NOT LOWEST BIDDER |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
23 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Maj Mathews M Shepherd
Mathura
REPAIR REPLACEMENT OF JOINERY IN MAP ACCN UNDER GE (W) MATHURA
2023_MES_598794_1
8300/1153/E8
Open Tender
Civil Works
Item Rate
180 days
GE (WEST) Mathura
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (West) Mathura
₹80,000
Yes
25 Jul 2023
26 May 2023
24 Jun 2023
26 May 2023
23 Jun 2023
11 Jun 2023
Amount
Taking down chowkhats with shutter (without taking off shutters from the frame) area n.exc. 1.50 Sqm each complete all as specified and directed.
Taking down chowkhats with shutter (without taking off shutters from the frame) area exc. 1.50 Sqm but n.exc 4.00 sqm each complete all as specified and directed.
Taking down shutter only of any description exc 1 sqm but n. exc 2 sqm each complete all as specified and directed.
S&F Pressed steel frame made out of MS Sheet 1.25mm thick for doors of size 125 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of priming complete all as specified and directed. Note:- During fixing of chowkhat, surface shall be make good in plumb with existing finishies like cement plaster simlar wall tiles, floor tiles etc as per site requirement.
S&F Pressed steel frame made out of MS Sheet 1.25mm thick for doors of size 105 x 60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of priming complete all as specified and directed. Note:- During fixing of chowkhat, surface shall be make good in plumb with existing finishies like cement plaster simlar wall tiles, floor tiles etc as per site requirement.
M&L for PCC (1:3:6) type C-0 using 12.5 mm graded stone aggregate as in filling of pressed steel frame complete all as specified and as directed.
S&F 35mm thick plain framed panelled door shutter, factory made (any number of panels) of 2nd class hard wood with lock rail and panels of 9mm thick BWP commercial ply or 12mm thick veneered particle board with commercial veneering on both faces including 2nd class hard wood kail beading 20mm wide tapering from 10mm to 5 mm on one side of shutter & fitted to chowkhats. The size of rail and style shall be as per IS –1003 (Part-I) (wood shall be kiln seasoned and chemically pressure treated) complete all as specified and directed.
S&F 35mm thick factory made glazed and skeleton shutters of 2nd class HW with partially panel shutter open rebated and prepared to receive glass / gauze etc edges or framing plain chamfered or rounded fitted with cut or mitred beads for securing glass etc as specified in SSR pt-1 section 8.24 (a) complete all as specified and directed.
M&L for 30mm thick flush shutter solid core construction with block board core & ply wood face panels, commercial type on both faces complete all as specified and directed by Engineer-in-charge.
S&F Factory made PVC single door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as per specification and drawing of SSR Part-I and the door frame to be fixed to the wall using MS screw 75mm long with PVC fastener as per manufacturer's, instruction complete all as specified and directed.
S&F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (stile:), with particle board core and 2,4 or 6 raised panel design with 5mm thick Moulded PVC Sheet on the front Face & 5mm Plain colour PVC sheet on back face, fixing in frame at site complete specification & drawing as per SSR.
S&F sheet glass ordinary quality 4mm thick and glazing with oil putty or wooden beads in shape n.exc 0.50 Sqm in each pane including hacking out old unserviceable sheet glass complete all as specified and directed.
S&F sheet glass ordinary quality 4mm thick and glazing with oil putty or wooden beads in shape n.exc 0.50 Sqm in each pane complete all as specified and directed.
S&F in repair stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F 100mm long stainless steel Butt hinges fixed complete all as specified and directed.
S&F 200mm stainless steel barrel tower bolts with bright bolt and fixed complete all as specified and directed.
S&F 150mm long stainless steel handles, oval type complete all as specified and directed.
S&F 300mm stainless steel sliding door bolts, bolt type with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.
S&F 150mm Anodised aluminium anodised barrel tower bolt of extrude section and fixed complete all as specified and directed.
S&F Anodised aluminium 150mm handles, cast type complete all as specified and directed.
S&F 140mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.
S&F Factory made steel windows with side hung shutters including projecting type hinges with steel handle & steel peg stay complete with glazing bars, dovetailed or welded and also including painting the exposed steel surfaces with one shop coat of Zinc-Chromate primer complete all as specified and directed.
S&F Factory made steel windows with side hung shutters including projecting type hinges with steel handle & steel peg stay complete without glazing bars, dovetailed or welded and also including painting the exposed steel surfaces with one shop coat of Zinc-Chromate primer complete all as specified and directed.
S&F factory made steel ventilator with top hung shutter including hinges , steel peg stay complete all as specified and directed.
S&F mild steel framed work as grills, gratings etc with end of bars shouldred and / or rivited or forged into spikes, framed guard bar barred iron door ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to Fe-290, Gde-E-165, complete all as specified and directed.
S&F mild steel framed work as in doors / gates / steel frames etc. of angle or other section with gusset plates, rails, braces, etc, complete, drilled for fixing of steel sheeting or other covering including necessary welding etc and fixing in position of quality Fe 290 (Gde E-165) complete all as specified and directed by Engineer-in-charge.
S&F in repairs curtain rod, stainles steel of 20mm dia with fixing brackets stop rollers etc fix complete all as specified and directed.
Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.
M&L for Rendering 15mm thick on other than fair faces of brick work or concrete surfaces in cement mortar (1:6) and finished surface fair and even complete all as specified and as directed.
M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces finished fair and even in CM (1:4) mixed with liquid water proofing compound complete all as specified and directed. Note : Liquid WPC shall be measured and paid sapertaly.
M&L for preparation of new plastered surface of wall and applying two coats of cement base paint complete all as specified and directed.
M&L for complete removal of existing treatment on walls and applying two coat of cement base paint including preparation of surface complete all as specified and directed.
M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper over a one coat of chalk whitening on walls complete all as specified and directed.
M&L for complete removal of existing treatment and preparation of old surface of walls and applying two coat of distemper oil emulsion distemper on wall incl applying a coat of wall care putty to achieve smooth finish to wall etc complete all as specified and directed.
M&L for preparation of old distempered surfaces of walls and applying one coat of distemper oil emulsion white or tinted, complete all as specified and directed by Engr-in-Charge
Supply only liquid water proofing compound complete all as specified and directed.
M&L for preparation of new steel surfaces of any description not otherwise described not exc 10 cm width or girth and applying two coats of synthetic enamelled paint over one coat of red oxide primer complete all as specified and directed.
M&L for preparation of steel surface already treated with primer over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.
M&L for preparation of old steel surfaces of any description or girth over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.
M&L for painting to new wood or wood based surfaces of any description not otherwise described over 10 cm in width or girth including preparation of surfaces, priming with pink primer (one coat) finished with two coats of synthetic enamel paint complete all as specified & directed.
M&L for preparation of old painted wooden /wood based materials surfaces of any description , not otherwise described ,over 10 cm width or girth and painting one coat with synthetic enamel including cleaning, stopping and rubbing down and removing all drops , dirts and splashes etc.complete all as spcified.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and emoving rubbish off premises complete all as specified and directed.
M&L Non skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match with and including 15mm thick screed bed in cement mortar (1:6) for laying floor finishes complete all as specified and as directed.
M&L for glazed ceramic tile 450x300x7 mm thick etc set and jointed in neat cement slurry and pointd in white or coloured cement on vertical surface over 10mm thick cement plaster in CM (1:4) complete all as specified and directed.
M&L MS work conforming to Fe-290 (Gde E-165) as in bands, straps, clamps, hold fasts, rungs, handles of manholes and other similar articles including two coat of black bituminous paint complete all as specified and directed by Engineer-in-Charge.
S&F powder coated aluminium anodised door frame and shutter of section as under and providing 5.50mm thick tinted gass with and including each shutter to be provided with aluminium fittings such as aluminum butt hinges 100mm- 03 Nos, Aluminum handles 150mm- 02 Nos, Aluminium tower bolts 150mm- 02 Nos, rubber neopran beadding, glazing clips and one lock four lever with duplicate keys in each opening and 01 No hydraluic door spring etc including taking down old aluminium shutter with chowkhat complete all as specified and directed. (a) Outer Frame - 100x50x1.20mm (b) Shutter - 90x50x1.20mm (c) Top, middle & Bottom rail 90x50x1.20mm etc.
Taking down aluminium door/window of any size/any description and refixing in the same opening after tightening , easing/change the section as required , including fitting the rubber packing aluminium snap beading resetting floor/hydraulic door closer/spring etc complete all as specified and directed.
S&F powder coated aluminium window using 63mmx38mmx1.6mm chowkhats with 48mmx48mmx1.6mm openable section as in shutter including ornamental aluminium grill, 5.5mm thick glass panes of approved make with rubber for fixing glass and including builders hardware such as aluminium handles 100mm-02 Nos, tower bolts 100mm-02Nos, hooks and eye-02 Nos 150mm, butt hinges 100mm 04 Nos etc complete all as specified and directed.
S&F in repairs door closer hydraulically regulated designation No. 3 universal type cast iron body suitable for door shutters of 851 to 1000mm in width and fixed complete all as specified and directed.
S&F 100mm Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and directed.
S&F 300mm mild steel (Helical door spring) ordinary rat tail rod pattrern spring including roller and roller plate complete with necessary welding work complete all as specified and directed.
S&F mild steel Door seal for doors upto 1000mm long and thickness not less than 1mm complete all as specified and directed.
Karman Infra Projects
BHARDWAJ CONSTRUCTIONS
M/s Hoti Lal Contractor
R N AGRAWAL
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .