Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.9 LAccepted-AOC PLOT NO 46 WARD NO 08 OPPOSITE RADIO TOWER SAGAR ROAD TILAK NAGAR BIKANER 334003 RAJ | BIKANER | BIKANER | RAJASTHAN | 334003 | ₹35.9 L | L1 | Accepted-AOC Due to lowest bidder. |
| 2 | L2₹39 LRejected-Finance B 22 152 STREET NO 1 14 BABA FARID NAGAR BATHINDA 151001 PB | BATHINDA | PUNJAB | 151001 | ₹39 L | L2 | Rejected-Finance Due to not lowest bidder. |
| 3 | L3₹39.4 LRejected-Finance PEMASAR ROAD WARD NO 04 UDASAR BIKANER RAJASTHAN 334022 | BIKANER | RAJASTHAN | 334022 | ₹39.4 L | L3 | Rejected-Finance Due to not lowest bidder. |
| 4 | L4₹39.5 LRejected-Finance | ₹39.5 L | L4 | Rejected-Finance Due to not lowest bidder. |
| 5 | L5₹40.3 LRejected-Finance 77 KAILASH PURI BIKANER RAJASTHAN PIN 334001 | BIKANER | RAJASTHAN | 334001 | ₹40.3 L | L5 | Rejected-Finance Due to not lowest bidder. |
| Sl No | Description | Qty | Unit | vikas builders L6 | SUBHAM ENTERPRISES L3 | M/S BUDHRAM BISHNOI L1 | Beenu Co. Company L5 | HARPREET SINGH CONTRACTOR L2 | BIG B CONSTRUCTION L4 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Taking down chowkhats or frames not exc. 1.50 sqm each but with shutter (w/o taking of shutter from the frame ) including Windows /ventilators complete all as specified and directed by Engg In Charge ( The cost of making good the surface of wall /floor with matching the existing surface either tile or plastered surface whatever exist on ground is including in the unit rate of item) | 50 | Each | 160 ₹8,000 | 50 ₹2,500 | 159 ₹7,950 | 140 ₹7,000 | 150 ₹7,500 | 100 ₹5,000 |
| 2.00 | Taking down chowkhats or frames exc. 1.50 sqm and not exc 4 Sqm each but with shutter (w/o taking of shutter from the frame ) complete all as specified and directed by Engg In Charge ( The cost of making good the surface of wall /floor with matching the existing surface either tile or plastered surface whatever exist on ground is including in the unit rate of item) | 40 | Each | 210 ₹8,400 | 50 ₹2,000 | 199 ₹7,960 | 150 ₹6,000 | 200 ₹8,000 | 130 ₹5,200 |
| 3.00 | Taking down shutters of any description n.exc 1 Sqm each and removal from site complete all as specified and directed by Engg In Charge ( The cost of making good the surface of wall /floor with matching the existing surface either tile or plastered surface whatever exist on ground is including in the unit rate of item) | 100 | Per leaf | 75 ₹7,500 | 50 ₹5,000 | 69 ₹6,900 | 90 ₹9,000 | 70 ₹7,000 | 70 ₹7,000 |
| 4.00 | Taking down door shutter of any desc exc 1 sqm but not exc 2 sqm and refixing in the same opening including repairs and easing/adjustment to existing shutter complete all as specified and directed by Engg In Charge ( The cost of making good the surface of wall /floor with matching the existing surface either tile or plastered surface whatever exist on ground is including in the unit rate of item) | 200 | Per leaf | 160 ₹32,000 | 50 ₹10,000 | 89 ₹17,800 | 200 ₹40,000 | 150 ₹30,000 | 100 ₹20,000 |
| 5.00 | Taking down door shutter of any desc exc 1 sqm but not exc 4 sqm and romoving to store complete all as specified and directed by Engg In Charge ( The cost of making good the surface of wall /floor with matching the existing surface either tile or plastered surface whatever exist on ground is including in the unit rate of item) | 50 | Each | 115 ₹5,750 | 50 ₹2,500 | 129 ₹6,450 | 115 ₹5,750 | 110 ₹5,500 | 110 ₹5,500 |
| 6.00 | Resecuring and easing & adjusting without taking down shutters of any description upto 4.0 Sqm each including all fittings complete all as specified and directed by Engg In Charge | 50 | Per leaf | 200 ₹10,000 | 50 ₹2,500 | 149 ₹7,450 | 150 ₹7,500 | 200 ₹10,000 | 115 ₹5,750 |
| 7.00 | Taking down and refixing Aluminium Door / window /Ventilator including chowkhat if required and carrying out necessary repairs , securing rails ,tightening scews ,hinges etc and same including repair of rubber bedding , aluminium clip, adjustment of glass, repair of floor spring or hydraulic door closer with oiling or greesing etc including adjusment of horizontal or middle style.complete all till the satisfaction of engineer-in-charge ( The cost of making good the surface of wall /floor with matching the existing surface either tile or plastered surface whatever exist on ground is including in the unit rate of item) | 100 | Each | 420 ₹42,000 | 400 ₹40,000 | 629 ₹62,900 | 350 ₹35,000 | 400 ₹40,000 | 130 ₹13,000 |
| 8.00 | Hacking out old broken glass (any thickness size quality or desc.) from wooden frames or stone conc. or brick surrounds glazed with putty or fixed with beads complete all as specified and directed by Engg In Charge. | 570 | Sqm | 120 ₹68,400 | 10 ₹5,700 | 49 ₹27,930 | 20 ₹11,400 | 50 ₹28,500 | 15 ₹8,550 |
| 9.00 | S & F Sheet glass/frosted glass 3 mm thick ordinary quality and glazing with oil putty in square not exc.0.5sqm in each pane all as specified. | 570 | Sqm | 600 ₹3.4 L | 600 ₹3.4 L | 459 ₹2.6 L | 550 ₹3.1 L | 450 ₹2.6 L | 500 ₹2.9 L |
| 10.00 | S&F 18/19 mm thick single side Pre laminated PVC Boards suitablely fixed in kitchen cabinets/Cupboards,frames, partitions and shelves of built in cup boards,almirahs and similar work etc. of any finish complete all as specified and as directed. | 370 | Sqm | 2,600 ₹9.6 L | 2,800 ₹10.4 L | 1,859 ₹6.9 L | 2,690 ₹10.0 L | 2,300 ₹8.5 L | 2,500 ₹9.3 L |
Updated dates
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
20 Nov 2025, 6:00 pmClosed
GE(N) Bikaner
GE(N) Bikaner (Raj)-334001
REPAIRS TO JOINERY WORK AND CONNECTED ITEMS OF ZONE B OF AGE BR-I (LESS COMPREHENSIVE MAINT) UNDER GE(N) BIKANER AT MIL STN BIKANER
2025_MES_726220_2
GE (N) BKN-TOKEN/21/2025-26
Open Tender
Miscellaneous Works
335 days
Bikaner
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE(N) Bikaner
₹98,000
Yes
12 Jan 2026
28 Oct 2025
27 Nov 2025
28 Oct 2025
20 Nov 2025
6 Nov 2025
Amount
Taking down chowkhats or frames not exc. 1.50 sqm each but with shutter (w/o taking of shutter from the frame ) including Windows /ventilators complete all as specified and directed by Engg In Charge ( The cost of making good the surface of wall /floor with matching the existing surface either tile or plastered surface whatever exist on ground is including in the unit rate of item)
Taking down chowkhats or frames exc. 1.50 sqm and not exc 4 Sqm each but with shutter (w/o taking of shutter from the frame ) complete all as specified and directed by Engg In Charge ( The cost of making good the surface of wall /floor with matching the existing surface either tile or plastered surface whatever exist on ground is including in the unit rate of item)
Taking down shutters of any description n.exc 1 Sqm each and removal from site complete all as specified and directed by Engg In Charge ( The cost of making good the surface of wall /floor with matching the existing surface either tile or plastered surface whatever exist on ground is including in the unit rate of item)
Taking down door shutter of any desc exc 1 sqm but not exc 2 sqm and refixing in the same opening including repairs and easing/adjustment to existing shutter complete all as specified and directed by Engg In Charge ( The cost of making good the surface of wall /floor with matching the existing surface either tile or plastered surface whatever exist on ground is including in the unit rate of item)
Taking down door shutter of any desc exc 1 sqm but not exc 4 sqm and romoving to store complete all as specified and directed by Engg In Charge ( The cost of making good the surface of wall /floor with matching the existing surface either tile or plastered surface whatever exist on ground is including in the unit rate of item)
Resecuring and easing & adjusting without taking down shutters of any description upto 4.0 Sqm each including all fittings complete all as specified and directed by Engg In Charge
Taking down and refixing Aluminium Door / window /Ventilator including chowkhat if required and carrying out necessary repairs , securing rails ,tightening scews ,hinges etc and same including repair of rubber bedding , aluminium clip, adjustment of glass, repair of floor spring or hydraulic door closer with oiling or greesing etc including adjusment of horizontal or middle style.complete all till the satisfaction of engineer-in-charge ( The cost of making good the surface of wall /floor with matching the existing surface either tile or plastered surface whatever exist on ground is including in the unit rate of item)
Hacking out old broken glass (any thickness size quality or desc.) from wooden frames or stone conc. or brick surrounds glazed with putty or fixed with beads complete all as specified and directed by Engg In Charge.
S & F Sheet glass/frosted glass 3 mm thick ordinary quality and glazing with oil putty in square not exc.0.5sqm in each pane all as specified.
S&F 18/19 mm thick single side Pre laminated PVC Boards suitablely fixed in kitchen cabinets/Cupboards,frames, partitions and shelves of built in cup boards,almirahs and similar work etc. of any finish complete all as specified and as directed.
S & F Piano Hinges mild steel ,bright finish width of flaps open in 40mm all as specified and directed by engineer in charge
S&F stainless steel catcher of superior quality all as specified and directed by Engg In Charge.
S&F stainless steel fancy type bright finish handles fixed with screw of 125 mm/150 mm size all as specified
S & F in repairs stainless steel tubular curtain/drapery rod 25 mm dia ( in length as directed) with & including pair of projecting type fancy stainless steel brackets fixed at both ends with PVC rawl plug & steel screws on wall/beam complete all as specified and as directed .
S&F 1.25 mm thick Pressed steel frames of size 125mm x 60mm for doors including necessary fixing lugs, hinges, lock strike plate, etc and including PCC as filling back of chowkhat/frame complete as specified. ( The cost of making good the surface of wall /floor with matching the existing surface either tile or plastered surface whatever exist on ground is including in the unit rate of item)
S&F 1.25 mm thick Pressed steel frames of size 105mm x 60mm for doors including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified ( The cost of making good the surface of wall /floor with matching the existing surface either tile or plastered surface whatever exist on ground is including in the unit rate of item)
S&F Butt hinges of size 100mm Stainless steel (ISI marked) including welding to frame where required complete all as specified and as directed.
S&F Flush Shutters 35 mm thick , solid core construction, with block board core and plywood face panel , commercial type on both side complete. Including edges of door covered with teak bid and makng provision for fixing mortice lock if required and hinges including both face is covered with decorative face veneer with lipping /frame to match complete all as specified and directed.
S & F IInd class hard wood glazed and skeleton shutters 35mm open rebated and prepared to receive glass, gauze etc, without sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR Part I section 8, clause 8.24 (a) supplied and fixed to chowkats all as specified.
S&F MS 300 mm long ordinary rat tail rod pattern springs incl roller & roller plate complete all as directed.
S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples
S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor; overall length of cover plate 140 mm complete.
S&F SS tower bolts ,150 mm length all as specified.
S&F SS sliding door bolt, plate type 250 mm all as specified
S&F SS handle, size 150 mm, all as specified
Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube all as specified and approved ( The cost of making good the surface of wall /floor with matching the existing surface either tile or plastered surface whatever exist on ground is including in the unit rate of item)
S&F factory made solid panel PVC door shutter with MS square tube 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC sheet stirip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top,lock and bottom rail on either side & as gap insert for top rail & bottom rail .panelling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement S&F in the frame at site as per specification.
S&F Powder coated aluminum door / window /Ventilator frames/shutter ,other sections for doors , windows , ventilators with one or more rebates , channel for sliding shutters , grills etc including jointing cleats for fixing etc , complete all as specified.
S & F aluminium glazing clip with rubber gasket of suitable size and thickness as required at site for fixing glass in aluminium door/windows/ventilator complete all as specified and directed by Engineer-in-Charge.
S&F sheet glass 5.5 mm thick ordinary quality & glazing with rubber gasket in squares in each pane as in aluminium door/window /Ventilator complete all as specified and directed by Engineer-in-Charge.
S&F 150 mm powder coated Aluminium,tower bolts of extruded section all as specified.
S&F Powder coated aluminum handle cast type 100 mm /150 mm /200mm size all as spfd and directed.
S&F Powder coated 75mm/100 mm size butt hinges , type C21 extruded aluminum alloy ISI marked all as spfd.
S & F brass 4 lever mortice lock, vertical type size 100 mm suitble for aluminium door complete all as specified and directed by Engineer-in-Charge.
S&F framed work such as grills ,framed guard bars barred iron doors ,ladders,Cooler stand, angle frame ,framed balusters railings and similar work conforming to Fe290 Gde -E-165 all as specified.
S & F for door closer hydraulically regulated , designation No 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 KG and fixed complete all as specified and directed by Engineer-in-Charge.
S & Fixing Double action floor spring hydraulically regulated any type all as specified ( The cost of making good the surface of wall /floor with matching the existing surface either tile or PCC/ plastered surface whatever exist on ground is including in the unit rate of item)
M&L for preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of red oxide primer.
M&L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) as specified
M&L for welding in repairs n.exc 2.5 cm in length and not exceeding 6 mm thick of metal complete all as specified and directed by Engineer-in-Charge.
Supply and fixing factory made uPVC white colour Three track three panels sliding window/two track two panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules ofelasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). → Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made all as specified and directed .
All as per item No-45 above but single extruded & size of WPC Chowkhat/frame of size 65 x 125mm ditto
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge including supply and fixing following items : (a) Stainless Steel (304 Grade) Finished Butt Hinges 100mm - 3 nos. per leaf (Table 6 of BIS 12817-2020) BIS marked. (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 nos per leaf as per table 1, dia of bolt 12mm as per BIS 15833.
(c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos. per leaf (d) Stainless Steel (304 Grade) Finished Sliding Bolt 300 mm - 1 no. per leaf, 16mm dia as per BIS marked clause 3(iii) of BIS 15834-2020. (e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 nos. per leaf
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type glazed/gauge skelton door shutter of size 30 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws including S&F of stainless steel 304 Grade (natural finish) wire cloth, all as per direction of Engineer- In- Charge including supply and fixing following items :
(a) Stainless Steel (304 Grade) Finished Butt Hinges 100mm -3 nos. per leaf (Table 6 of BIS 12817-2020) BIS marked. (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 nos per leaf as per table 1, dia of bolt 12mm as per BIS 15833. (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos. per leaf (d) Stainless Steel (304 Grade) Finished Sliding Bolt 300 mm - 1 no. per leaf, 16mm dia as per BIS marked clause 3(iii) of BIS 15834-2020. (e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 nos. per leaf (f) Stainless Steel (304 Grade) wire cloth fixing as per manufacture (g) 300mm mild rat tail rod pattern springs including roller and, roller plate
Attending complaints of rolling shutters or iron gate of any type any height and any length making functional by providing greasing oiling , welding etc.including taking down rolling shutters/iron gate or hood if required complete all as specified and as directed.
HARPREET SINGH CONTRACTOR (BID ID -3473488)
SUBHAM ENTERPRISES (BID ID -3478630)
BIG B CONSTRUCTION (BID ID -3473849)
Beenu Co. Company (BID ID -3479038)
vikas builders (BID ID -3473936)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.66 MB
tendedocument21.pdf
Tender Documents • 2.07 MB
BOQ_825481.xls
BOQ • 0.79 MB
Download all tender documents and submit your bid