REPAIRS TO SECURITY WALL, CHAIN LINK FENCING, BARBED WIRE/FENCING AND VIEW CUTTER AT ZONE A AND B AT PATTAN UNDER GE 969 EWS

Amount

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground, complete all as specified and as directed.

Dismantling fencing wire mesh, any type, complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails straining bolts, etc. including provision of binding wire.Complete all as specified and directed by Engr-in-charge. Note : Supplu only chain link fencing and line wire will be measured and paid separately.

Supplied only chain link MS galvanised fencing, any size or type, complete all as specified and as directed.

S&F for Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut,length of bolt ecx 10cm nut n.exc 20 cm long and dia of neck 11 to 15 mm, complete all as specified and as directed.

M&L for two coat of synthetic enamel paint over coat of Red oxide primer over steel surfaces n.exc 10 cm width or girth, complete all as specified and as directed.

Demolition of reinforced cement concrete ( reinforcement cut as required to facilitate demolition) of any description and in any position not other wise specifically provided for, complete all as specified and as directed.

M&L RCC type B1 1:2:4 (20 mm graded stone agg) as in beams,cantilevers, lintels over 1.5 mtr span including necessary form work, complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level), complete all as specified and as directed.

Providing PCC Type C1 1:3:6 (20 mm graded stone agg) as in angle post of wall including necessary form work, complete all as specified and as directed.

M&L PCC 1:3:6 type C-2 using 40mm graded stone agg in foundation and mass concrete, complete all as specified and as directed.

Providing PCC Type B1 1:2:4 (12.5 mm graded stone agg) as in copings of wall, complete all as specified and as directed.

M&L Cement concrete (1:4):8 type D-2 (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete, complete all as specified and as directed.

M&L for Plain cement concrete (1:2:4), type B-1 (using 20mm graded crushed stone aggregate) as in benching, bed plates, coping, mud stop and the like including necessary formwork and finishing all exposed surface of concrete as per clause 4.11.16.2(a) & (d) of SSR Part-I, , complete all as specified and as directed.

M&L for Cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in surface channels, drains etc, complete all as specified and as directed.

M&L for 15 mm thick Screed bed or bedding layer in CM ((1:4)) set and jointed in neat cement slurry and pointed with white or coloured cement to match, complete all as specified and as directed.

M&L Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.06 Sqm but n.exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match etc, complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not other wise provided for, complete all as specified and as directed.

M&L Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming to Fe-290 Gde -E-165, complete all as specified and as directed.

M&L Mild steel angle embeding in concrete and screwing etc.and struts in fencing including cutting tops to shape as directed,drilling holes notching for wire etc.flat iron fillets ( for securing wiremesh etc.) including all necessary drilling bolting or reveting etc. and similar work conforming to Fe-290 Gde -E-165, complete all as specified and as directed.

M&L preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide, complete all as specified and as directed.

Demolition of brick work or stone boulder masonry,built in cement mortar or cement lime mortar including all quions, arches,pillars, chimney works etc, complete all as specified and as directed.

M&L brick work with sub class `B' bricks straight or curved on plan exc 6.0m mean radius built in cement mortar ((1:4)), complete all as specified and as directed.

M&L brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius built in cement mortar 1 :6, complete all as specified and as directed.

M&L brick work (except bricks) obtained from demolitation, with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radious built in cement mortar ((1:6)), complete all as specified and as directed.

M&L for Walling of random rubble uncoursed, well bonded, bedded and solidly hearted, built in cement mortar (1:6), complete all as specified and as directed.

M&L Walling random rubble, uncoursed well bonded, bedded and solidly hearted built in CM (1:4), complete all as specified and as directed.

All as per above item No. 27 above,but except stones, complete all as specified and as directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed.

Dismantling of plain or corrugated steel sheeting any gauge and thickness in roofing covering including Nainital or similar pattern roof covering, complete all as specified and as directed.

Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, (each line wire to be measured) etc, complete all as specified and as directed.

Taking down cement plaster on brick or stone walls etc. Including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed.

M&L 15mm thick plastering on external wall surfaces in cement mortar (1:4) and finished even and smooth without using extra cement, complete all as specified and as directed.

M & L For Rendering 10 mm thick plastering on brick work or concrete surface in CM (1:4) and rendering is to be finished even and smooth w/o using extra cement, complete all as specified and as directed.

M&L for rendering 10mm thick in CM (1:4) on fair faces of brick work or concrete surfaces with WPC, finished even and smooth complete. Without using extra cement (WPC shall be measured and paid separately).

Supply only integral water proofing compound, complete all as specified and as directed.

Preparation of undecorated/old surfaces of walls and applying one coat of oil emulsion, complete all as specified and as directed.

preparation of undecorated/old surfaces of walls and applying one coat of white wash, complete all as specified and as directed.

Preparing newly plastered surfaces and applying two coat of cement base paint over a coat of primer with alkali resistant priming paint, complete all as specified and as directed.

M&L Complete removal existing treatment and preparing of plastered or unplastered surfaces of walls and applying two OBD over a coat of primer, complete all as specified and as directed. .

S&F galvanised 2 strand,steel barbed wire 2.24mm dia barbed with 2 mm dia barb at 75 mm spacings and straining and fixing to any type of standard rails staining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc as directed (each line wire to be measured).

Fixing only in repair galvanised 2 strand,steel barbed wire 2.24mm dia barbed with 2 mm dia barba at 75 mm spacings and straining and fixing to any type of standard rails staining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc as directed (each line wire to be measured).

Restraining & Resecuring inlcuding making good staples of galvanised 2 strand,steel barbed wire 2.24mm dia barbed with 2 mm dia barba at 75 mm spacings and straining and fixing to any type of standard rails staining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc as directed (each line wire to be measured).

M&L Mild steel TMT steel bars 10 mm dia and over, cut to length, bent to shape, as required including cranking,bending spirally for hooping for columns. Hooking ends and binding with and including mild steel wire (annealed not less than 0.9 mm dia), complete all as specified and as directed.

All as per above item No. 44 but 5 mm dia and over up to and including 8 mm dia in stirrups, spacers and binders, complete all as specified and as directed.

M&L Keyed pointing to random or polygonal rubble stone masonry, uncoursed or brought upto courses in cement mortar (1:4), complete all as specified and as directed.

Excavation in trenches in any type of soil, n exc 1.5 M wide and n exc 1.5 M deep for foundation, etc or for shafts, wells, manholes etc n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in any type of soil, complete all as specified and as directed.

Returning filling in incl spreading leveling, watering and well ramming in layers n exc 25 cm, complete all as specified and as directed.

Removing excavated materials n exc 50M and depositing where directed at a level n exc 1.5 M above the starting point, complete all as specified and as directed.

S&F PVC (SWR) pipes 110 mm single socketed, in any length with rubber ring joints, laid in trenches or in floor, complete all as specified and as directed.

S&F in repair PVC (SWR) pipes 110 mm single socketed, in any length with rubber ring joints, fixed to wall, complete all as specified and as directed.

S&F PVC (SWR) pipes 75 mm single socketed, in any length with rubber ring joints, laid in trenches or in floor, complete all as specified and as directed.

S&F in repair PVC (SWR) pipes 75 mm single socketed, in any length with rubber ring joints, fixed to wall, complete all as specified and as directed.

M&L 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and as directed.

S&F of PVC (SWR) bends of 75mm dia any radius, complete all as specified and as directed.

S&F of PVC (SWR) bends of 110mm dia any radius, complete all as specified and as directed.

S&F of PVC (SWR) 75/110mm branch piece,single (single Y) equal or unequal, complete all as specified and as directed.

S&F of PVC (SWR) 75mm dia junction double, Tee, equal or unequal, complete all as specified and as directed.

S&F of PVC (SWR) 110 mm dia junction double,Tee, equal or unequal, complete all as specified and as directed.

S&Fof PVC (SWR) 75mm dia junction double,(double T), equal or unequal, complete all as specified and as directed.

S&Fof PVC (SWR) 110 mm dia junction double,(double T), equal or unequal, complete all as specified and as directed.

S&F of PVC connection pipe 15 mm size with PTMT nuts of length 600mm fixed to GI tubing, complete all as specified and as directed.

S&F of PVC (SWR) vent cowl 75/110mm dia, complete all as specified and as directed.

Demolition and breaking up 75/110mm internal dia of drain pipes (SGSW, AC or Re-inforced concrete) set in cement laid in trenches incl all fittings & accessories, complete all as specified and as directed.

Demolition and breaking up 150mm internal dia of drain pipes (SGSW, AC or Re-inforced concrete) set in cement laid in trenches incl all fittings & accessories, complete all as specified and as directed.

S&F in repairs 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors fixed complete using PVC solvent and necessary testing etc, complete all as specified and as directed.

S&F in repairs 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors fixed complete using PVC solvent and necessary testing etc, complete all as specified and as directed.

M&L PCC 1:3:6 type C-2 conc bed using 40mm graded stone agg to drain pipe including packing under & haunching against the sides of pipe 100 mm dia ( internal) after these are laid in trenches, complete all as specified and as directed.

M&L for concrete bed to drain pipes in PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate including packing under haunching against the sides of pipe after they are laid and tested for 150mm dia, complete all as specified and as directed.

Cutting in to existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for as specified dia of pipe 150mm, complete all as specified and as directed.

Dismantling and disconnecting of existing CI/AC/PVC /soil vent pipe 100 mm bore fixed to wall,laid in trenches incl all fittings & accessories, complete all as specified and as directed.

S & F in repairs vitreous China squatting pan of Orrissa pattern of approved make of size 580 mm X 440 X 260 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe incl lime concrete bedding and connection to antisyphonage pipe etc including making good to floor, complete all as specified and as directed.

Viterous China urinal, flat back of size 465x355x265mm white (minimum) with grating and union for discharge pipe, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal plugs with and including 60mm long brass screws, pointing around urinal back in cement, including 32mm bore PVC waste pipe fixed in repair incl Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms), complete all as specified and as directed.

Mild steel TMT bars 8 mm dia, quality conforming to Grade 415 MPA cut to length , bent to shape required including cranking , bending and binding with mild steel wire (annealed) not less than 0.9mm dia, complete all as specified and as directed.

M & L precast RCC manholes cover in cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate, complete all as specified and as directed.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified of random rubble waling uncoursed or brought of to courses with maximum depression on face from straight edge held against the dressed surface not exceeding 40mm granite and trap stone, complete all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement incl forms, moulds, mitred/stopped ends etc, complete all as specified and as directed.

M&L 15mm thick cement plaster in cement mortar (1:4) on brick/concrete/sonte work surface and finished even and smooth without using extra cement, complete all as specified and as directed.

Demolition of RCC of any description and in any position not other wise specially provided for, complete all as specified and as directed. (reinforcement cut as required to facilitate demolition)

Use and waste of form work flat to roof slab etc, complete all as specified and as directed.

M & L for 80 mm thick Machine pressed precast concrete interlocking paver block with grey cement and pigments any shape and size confirming to IS 15658-2006 M-35 Grade including sand cushioning of 20 mm thick screed bed in cm (1:6) etc, complete all as specified and as directed.

M&L for Sand cushion under interlocking paver block, complete all as specified and as directed.

M & L pre-cast cement concrete type B-1 (1:2:4) as in Kerb stone. Slab cover, etc set in CM (1:4) incl necessary moulds/form work etc, complete all as specified and as directed.

M&L rubber moulded Chequered cement concrete tiles 30cm x 30m x 25mm thick, set jointed and pointed in neat cement slurry in floors with grey cement and pigments over 15 mm thick screed bed in CM (1:4) for laying floor finishes, complete all as specified and as directed.

S&F in repair pre-painted galvalume aluminium zinc coataing GI based profile steel sheet 0.50 mm thick of any colour having tnsile strength of 550 MPA as in roof covering/cladding to wall,fixed with self tappping screw as specified incl dismantling, complete all as specified and as directed.

S&F in repair Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified incl dismantling, complete all as specified and as directed.

Dismantling timber scantlings 40 sqcm and over in section in any position unframed work, complete all as specified and as directed.

S&F in repair 2nd class softwood in scantling clean swan timber framed and fixed to the position to replace old and decayed timber, complete all as specified and as directed.

M&L Weather boarding, 25 mm thick, wrought both sides, V-jointed to give 20mm laps and fixed, complete all as specified and as directed.

Dismantling timber scantlings in fillets, rails,posts rafters,purlins etc under 40 sqcm in section unframed work, complete all as specified and as directed.

M&L for plain fillets square rectangular or triangular in section using 2nd class soft wood clean swan secured with nails exc 13 but n. exc 25 sqcm in section, complete all as specified and as directed.

M&L plain fillets square rectangular or triangular in section using 2nd class soft wood clean swan secured with nails not exc 3 sqcm in section, complete all as specified and as directed.

Dismantling of wall and celling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness inlcuding cover fillets, complete all as specified and as directed.

S&F 6 mm thick insulation consisting of PVC Insulated Panels as in wall/ceiling having expanded polystyrene (EPS) stuck to 2mm thick plain colour PVC sheet duly fitted into the wall as per specifications and drawing Note : Panelling should be rested on L/U shape edge profile of same pattern (PVC/Aluminium)

M&L 4 mm thick Plywood in ceiling, grade BWR,type BB, fixed with screws to timber frame work, complete all as specified and as directed.

M & L 4 mm thick veneered decorative plywood ,grade 1 (with BWR resin) with decorative face veneers on both faces,in wall fixed with screws to timber frame work, complete all as specified and as directed.

S & F second class Softwood 15 mm thickness planed both sides and edges tongued and grooved or rebated,and fixed with nails any situation, complete all as specified and as directed.

M & L for glazed ceramic tiles in vertical surface 600x300x10 mm thick colour and design (as approved) in vertical surface and jointed in neat cement slurry and pointed in whiter or colour cement to match the colour of tiles over 15 mm thick cement plaster using CM (1:4) including dismantling, complete all as specified and as directed.

Taking down chowkats or frames but with shutters (without taking off shutters from the frame) exc 1.5 Sqm and n.exc 4.00 sqm, complete all as specified and as directed.

Taking down chowkats or frames but with shutters (without taking off shutters from the frame) not exc 1.5 Sqm, complete all as specified and as directed.

Taking down shutter of any description area exc. 1 sqm but n. exc. 2 sqm each, complete all as specified and as directed.

Taking down shutter of any description area n. exc. 1 sqm each, complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and as directed.

S&F Sheet glass thickness 3.00 mm,ordinary quality and glazing with oil putty in square not exceed 0.5 sqm in each pane including, complete all as specified and as directed.

S&F 2nd class soft wood glazed and skeleton shutters 35 mm thick , open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats

S&F Plain, framed,panelled shutters thickness 35 mm of 2nd class softwood,(any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, complete all as specified and as directed.

S&F Glazed and skeleton shutters thickness 30 mm,(2nd class softwood), open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of members of shutters supplied and fitted to chowkats if windows, ventilators, etc. are provided with stiles and rails as in SSR Part I, Sectionspecified 8 clause 8.24(b), complete all as specified and as directed.

M&L two coats of synthetic enamel paint over a coat of pink primer including preparation of surface on wooden sruface over 10 cm width or girth, complete all as specified and as directed.

S&F Door closer hydraulically regulated cost iron body designation No 1 universasl type suitable for door shuutters up to 700 mm in width and of weight not more than 35 kgs, complete all as specified and as directed.

S&F Aluminium anodised, barrel tower bolts 100 mm of extruded section and fixed, complete all as specified and as directed.

S&F Aluminium anodised, barrel tower bolts 200 mm of extruded section and fixed, complete all as specified and as directed.

S&F Aluminium alloy, anodised, sliding door bolt 200 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and as directed.

S&F M S Butt hinges 100 mm medium weight, cold rolled mild steel, complete all as specified and as directed.

S&F M S Butt hinges 75 mm medium weight, cold rolled mild steel, complete all as specified and as directed.

S&F Aluminium handles 100 mm , cast type,anodised, complete all as specified and as directed.

S&F Aluminium handles 150 mm , cast type,anodised, complete all as specified and as directed.

S&F floor door stopper long 140 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, complete all as specified and as directed.

S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and as directed.

S &F in repair curtain rod, mild steel, chromium plated fixing with stainless steel brackets and funnels stops, rollers etc, complete all as specified and as directed.

S&F Rat tail (helical) door spring 300 mm long fix/welded with chowkat, complete all as specified and as directed.

S&F sheet glass shelf assembly consisting of 5.5 mm sheet glass shelf 12 cm wide with brass chromium plated bracket guard and 60 cm long, complete all as specified and as directed.

S&F corner sheet glass shelf assembly consisting of 5.5 mm sheet glass shelf 12 cm wide with brass chromium plated bracket guard, complete all as specified and as directed.

Taking down and replacement with 3-layer PP-R polypropylele random copolymer) concealed pipe SDR 7.4 (PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot and cold water supply including all PRR plain & brass threaded polypropylele random fittings fixed complete to walls, ceiling or in floors, complete all as specified and as directed.

S&F in repair brass chromium plated tubular towel rail 20 mm dia D type , 60 mm long between flages, complete all as specified and as directed.

S&F Stop/angle valves 15 mm, cast copper alloy, screwed down,high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed fancy type, chromium plated, complete all as specified and as directed.

S & F Brass CP wall mixer 15 mm for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and as directed.

S&F CP health faucet hand held triggered nozzle and delivers a spray of water with pipe, complete all as specified and as directed.

S&F CP jet spray with flexible tube 1.5 mtr long, complete all as specified and as directed.

S&F vitreous chine wash down water closet pan ( Pedestal pattern) white or coloured excluding flushing cistern and flush pipe and seat cover incl provision of concrete/ white cementing and P or S trap in repairs, complete all as specified and as directed.

S&F in repair vitreous china wash basin, white flat back size 550x400 mm plug, porcelain stopper and incl brackets with waste fittings and connection pipe etc including pedestal, complete all as specified and as directed.

S&F in repairs pillar taps, 15 mm dia cast copper alloy fency type with capstan heads, chromium plated. screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts screwed for iron pipe, complete all as specified and as directed.

S&F Brass CP centre hole basin mixer, complete all as specified and as directed.

S&F for 15 mm bore in repair bib taps, fancy type chormium plated with crutch or butterfly handle screwed down screwed for iron pope or for brass ferrule in repair, complete all as specified and as directed.

S&F in repair stop valves fancy tupe chromium plated screwed down high presure , with crutch or butterfly handle, cscrewed both ends for iron pipe or for unions 15 mm bore, complete all as specified and as directed.

S&F PVC flushing cistern, 10 ltrs capacity, low level including brackets, inlet and outlet PVC pipe and fittings complete fixed in repairs, complete all as specified and as directed.

Note:- Schedule of credit Rs 61,005.00 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents.

MS DUTTA BUILDERS (BID ID -3287162)

M/S MANZOOR AHMAD YATOO (BID ID -3287217)