SPECIAL REPAIR TO BLDG NO T09 AT 226 COY ASC DEPOT AREA PROVN OF TOILET FACILITIS PROVN OF 2 X TOILET BLOCK ADJESTANT TO BLDG NO G30 G40 AT COD FOR STAFF AT AOC OFFICERS MESS PROVN OF RAIN PROTECTION SHED AND MISC WORK HOUSE NO P42 AT KIRBY PLACE

Dismantaling corrugated, semi corrugated AC sheeting etc any gauge, thickness, or similar pattern roof covering including ridges all as specified and directed.

S & F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of sky blue/ sea green colour having tensile strength of 550 MPa as in roof covering, fixed with self tapping screws/ J hooks if required complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.

Taking down wooden roof trusses, coupled rafters or trussed beams etc,(above 4 m & upto 8 mtrs),complete all as specified

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. confirming to Fe -290 (Gde E-165) complete all as specified.

M&L preparation new steel Surfaces of any des-cription, over 10cm in width or girth, not otherwise described two coat synthetic enamel paint over a coat of red oxide primer all as directed and specified.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as sepcified and directed

S & F GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20mm and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre /intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section of 0.55mm thickness having kurled web of 50mm and flange of 26mm each lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre complete size of grid 605 x 605mm all as specified and directed

S&F Providing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 5 m above floor level, over GI grame strips with 10 mm gap in between and reinforced with rabbit wire mesh fixed to GI frame made out of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25mm long self drilling and tapping screws having philips head with under head cutter at 200mm center to centre including finishing the joints of face with specially formullated jointing compound and 48 mm wide fibre tape to provide seamless finish of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete as per manufacturer instruction.

M&L for machine cut kota stone slab flooring 18-20 mm thick over 20mm thick cement screed bed using cement mortar (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including Pre- polishing complete all as specified.