Providing wooden furnitures for Panchaksharam Guest house in Anupuram Township.

Amount

Providing and placing of Wooden cot of outer size 2050 X 1000mm made up of first class teak wood scantling/planks and 18mm thick BWP plywood of make Green Ply (Green gold) (or) Century ply (Architect ply) with 1mm thick lamination one side and other side finished with Synthetic enamel paint as detailed below including providing necessary SS clamps/bolts for joints, providing 50mm dia PVC solid buffer for all legs, polishing the exposed surface of teak wood with two coats of PU polish, etc., all complete as per drawing and as directed by Engineer-in-charge. Note:- i) The overall size of cot should be 2050 mm (L) X 1000mm (W) X 400 mm (H) and bedstead of 1000 mm (W) X 1150 mm (H). ii) Head side frame shall be fabricated using 2 Nos of teak wood legs of size 75X75mm and Bracing the legs with 75 x 50mm at bedstead joint. Teak wood scantling of size 25 x 25 mm at top and 25 X 25mm at middle. 18mm thick plywood with 1mm thick laminate wood and metal finish shall be embedded in the teak wood frame for 750mm height with two nos of groove in the panel. iii) Leg side frame shall be fabricated using 2 Nos teak wood legs of 75 X 75mm and bracing with 75 X 50mm teak wood scantling. iv) Both the head side and leg side frame shall be jointed with bedstead fabricated using 40 X 100mm teak wood scantlings and braced at centre with 3 Nos of 50 X 50mm teak wood scantlings, jointing usings approved SS clamps. 18mm thick BWP plywood with painting shall be fixed over the frame work using approved screws.

Manufacturing and supplying of Bed side unit of outer size 645(W) X 400(D) X 500(H) mm made up of using 18mm thick BWP plywood of make Green Ply (Green gold) (or) Century ply (Architect ply) with 1mm thick lamination of approved colour/pattern of make Green ply or other approved make of as per drawing including providing 4 nos of PVC buffer at bottom, plywood exposed surface finished with 1mm thick lamination for inner and outer surface etc., all complete as per drawing and as directed by Engineer-in-charge.

Manufacturing and supplying of study table of outer size 900(L) X 600(W) X 750(H) mm made up of using of 18mm thick BWP plywood of make Green Ply (Green gold) (or) Century ply (Architect ply) bearing IS 710 mark and approved colour laminated with 1mm thick lamination of approved make and colour/pattern as per drawing as detailed below including providing one drawer unit, providing required hardware fittings of make EBCO (or) Godrej (or) KICH, providing 6 Nos of 20mm PVC buffer at bottom, etc., all complete as per drawing and as directed by Engineer - In - Charge. Note:- 1) One drawer unit of size 850mm(W) X 550mm (D) X 150mm (H) made up of 18mm thick BWP plywood of approved make and the drawer unit shall be fixed using 550mm long soft close telescopic drawer slides and profile type handle. All external, surface and drawer fascia, drawer box shall be finished with 1mm thick lamination. 2) All exposed surface of table including top, side, drawer fascia ,inside surface shall be finished with 1mm thick lamination of approved make.

Manufacturing and supplying of Teak-Wood wooden chair of size 418(L) X 400(B) X 800(H) mm by using best quality of First class teakwood scantlings and planks of required sizes as per drawings enclosed including polishing on wood surface with two coats PU polish (or) Touch wood polish of approved make, making surface smooth with suitable sand papers, applying filler / sealer coat, PVC buffer etc., all complete as per drawing and standard specifications as directed by the Engineer-in-charge. Note: a) Four legs of size 50 x50mm teak wood scantling braced at seat with 40x40mm teakwood scantling and bottom with 20x40mm teak wood scantling shall be fabricated using tenon or mortise joint. b) Back rest at top shall be fixed with 2 Nos of 20 x 50mm teak wood planks. c) Chair top with 20mm thick best quality of teak wood planks. Top Plank with one longitudinal half lap joint shall be allowed for chair. d) All frame work shall be made using First Class Teakwood and all exposed faces of teak wood frames shall be polished with three coats of PU polish as per specifications. Tolerance for all wood scantling/planks size shall be (±) 5mm.

E.SEKAR CONTRACTOR

s venkatesan civil & electircal contractor

CREATIVE DESIGN & PRODUCTS

Bidder Name

CREATIVE DESIGN & PRODUCTS

s venkatesan civil & electircal contractor

Dynamic Engineers

E.SEKAR CONTRACTOR