Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | I₹13.4 LAccepted-Finance | I | Accepted-Finance lowest rate quoted | |
| 2 | II₹17.9 LAccepted-Finance | II | Accepted-Finance higher rate quoted |
Tender Value
Refer Docs
EMD Value
₹47,900
Closing Date
14 Mar 2023, 4:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
DCF NALAGARH
DFO OFFICE NALAGARH
Additional and alteration of Divisional Forest Office Nalagarh of Nalagarh Forest Division, HP
2023_FD_70366_1
7740
Open Limited
Civil Works - Buildings
Item Rate
180 days
Forest Division Nalagarh
Please refer Tender documents.
11 documents required · 11 mandatory
₹500
DCF NALAGARH
₹47,900
15 Mar 2023
6 Mar 2023
15 Mar 2023
7 Mar 2023
14 Mar 2023
7 Mar 2023
Amount
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m Collum, Long wall, Short wall, Partition wall.
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level in 1:4:8 Collum, Long wall, Short wall, Partition wall and under floor.
Centering and shuttering including strutting, propping etc.and removal of form for Foundations, footings, bases of columns,etc. for mass concrete.
Centering and shuttering including strutting, propping etc.and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilever
Centering and shuttering including strutting, propping etc.and removal of form for Suspended floors, roofs, landings, balconies and access platform, Chajjas in side wall and Chajjas in front of building
Centering and shuttering including strutting, propping etc.and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts
Centering and shuttering including strutting, propping etc.and removal of form for Edges of slabs and breaks in floors and walls Under 20 cm wide.
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement 1:2:4 Foundations, footings, bases of columns,etc.for mass concrete (Slooping portion, Padastel)
Plinth beams ( under slab, Door window lintals, suspended floor , roofs and landing etc. Collume , pillars pieer etc.
Brick masonary work with 1st class bricks in superstructure above plinth level up to floor V level in all shapes and sizes in 1:6 (Long wall, side and middle wall, Deduction of opening door ,windows, enterance door, windows.
Steel reinforcement for R.C.C. work ready to use "cut and bend" rebars of approved make from factory/workshop to construction site including placing in position and binding all complete upto plinth level.( footing base jali 12mm dia @150 c/c, Collum vertical bars 16mm dia, Collum vertical bars 12mm dia , 8 mm dia rings@150c/c, 8 mm dia rings@150c/c, plinth beams 16 mm dia, plinth beams 12 mm dia, Door level beams 12 mm dia, under slab beam 20 mm dia, 16 mm dia, extra piece of 16 mm dia, RCC Slab @105 kg per cum of cc.
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws (Door and window)
Providing and fixing MS Channel door,window,clerestory window frame manufactured from M.S. Channel section of 75x40 mm including hinges jamb,lock jamb,beed and welded continously with M.S. flat 40x12 mm and cleat for fixing MS. hold fast 40x4mm of length 20cm complete in all respect i/c applying a coat of approved steel primer two coats after pre treatment of the surface or as directed by Engineer-in- Charge including carriage of materials within all leads and lifts.
Providing and fixing wire gauge laminated veneer lumber shutters conforming to IS : 14616, and as per TADS 15 :2001 (Part B) using galvanised wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm as per IS :1568, for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, as per directions of Engineer-in-charge: 35 mm thick shutters qty as per item no.7
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings /wooden frames with rawl plugs screws etc. in Windows,
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) Doors and Windows.
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. Complete 300x16 mm
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete 300x10 mm Doors .
250 x10 mm Windows.
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete 125 mm & 100mm
Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 500x500 mm
Tile work in skirting, risers of steps and dado up to 2 m height over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm, including pointing in white cement mixed with pigment of matching shade complete. Skirting
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter
6 mm cement plaster on ceilling 1:4 (1 cement: 4 fine sand) Chajjas of Side Walls and Chajjas in front of building
15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) (Recesption room, Main Enterance, Hall , Store Room, Outer side Front wall, Outer side wall ( Deduction of door windows, Enterance door, Windows)).
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete qty as p0er item no. 18 and 19
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including water thinnable priming coat with cement primer qty . As per item no. 20
Finishing walls with water proofing cement paint of required shade New work (Two or more coats applied @3.84 kg/10 sqm)
Providing and fixing at all height wall panelling with phenol bonded Bamboo Mat board conforming to IS:13958-1994 including providing and fixing to frame work made of 50mm x 50mm hardwood plugs including cutting brick work and fixing in cement mortar and making good the wall etc. and also providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc. with iron screw 9mm thickness
Providing and fixing at all height false ceiling of 4mm thick phenol bonded Bamboo Mat board (595x595mm) conforming to IS:13958-1994 including providing and fixing of frame work made of GI angle 25x25x0.4 mm thick all around suitably fixed to wall with the help of dash fastener and hanger frame (600x600 c/c) made GI slotted Tee having powder coating on bottom side (30x25x0.3 mm thick for main member & 25x25x0.3 mm for cross member) connected to ceiling with 2.64mm GI wire and anchor fastener at every junction and also including cost of making openings for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed all complete as per direction of Engineer-in-charge in hall
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. ( Chajjas on Windows and Chajjas on Windows).
Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture ( Flush door shutters and Wire guage shutter)
Electricity charges 7.5% of total amount
MADAN SINGH (Govt. Contractor)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .