Construciton of Hostel Building and Acedemic Block in Kasturba Gandhi Avasiya Vidhyalaya Moth Jhansi

Amount

Main Building (Academic Building )

Dismantaling brick work or stone work in lime or cement mortar and including stacking of materials as per directed by Engineer-in-charge with in a distance of 60 mt.

Excavation in foundation in black cotton soil (in Bundelkhand area) including lift upto 1.5 m. and lead upto 30 m. and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by Engineer-in-charge a distance of 30 m. from the foundation (Drain/Edging).

Cement concrete in 1:4:8 with cement, sand and (22.40-43)mm granite stone ballast (crusher broken) in foundation including supply of all materials, labours and T&P etc. required for proper completion of work.

R.C.C. work with cement approved course sand and 2 cm (3/4)” gauge approved stone ballast in the proportions of 1:1½;3 in Plinth bend excluding supply of reinforcement and its bending but including its fixing and bending the same with 24 B.W.G.G.I. Binding wire and including necessary centering and shuttering etc. and also including Supply of all materials, labours and T&P etc. required for proper completion of work binding wire cost being including in the item but for Raft foundation

First Class bricks works in 1:6 cement and coarse sand of 1.25F.M. mortar in foundation upto plinth supply of all materials, labour and T&P etc. required for proper completion of the work including providing scaffolding rope, chahlies fixing and removal. in foundation.

R.C.C. work with cement approved course sand and 2 cm (3/4)” gauge approved stone ballast in the proportions of 1:1½;3 in Plinth bend excluding supply of reinforcement and its bending but including its fixing and bending the same with 24 B.W.G.G.I. Binding wire and including necessary centering and shuttering etc. and also including Supply of all materials, labours and T&P etc. required for proper completion of work binding wire cost being including in the item but for G_Plinth Bend

Supply and filling of Earth in plinth also including supply of all materials, labour and T&P etc. required for proper completion of the work.

Supply and filling of stone dust also including supply of all materials, labour and T&P etc. required for proper completion of the work.

Cement concrete in 1:4:8 with cement, sand and (22.40-43)mm granite stone ballast (crusher broken) in foundation including supply of all materials, labours and T&P etc. required for proper completion of work.

First Class bricks works in 1:6 cement and coarse sand of 1.25F.M. mortar in above plinth supply of all materials, labour and T&P etc. required for proper completion of the work. But in super structure in 230mm wall including providing scaffolding rope, chahlies fixing and removal. In Super Structure.

First Class bricks works in 1:4 cement and course sand of 1.25F.M. mortar in above plinth supply of all materials, labour and T&P etc. required for proper completion of the work. But in super structure in 115mm wall including providing scaffolding rope, chahlies fixing and removal. In Super Structure work.

R.C.C. work with cement approved course sand and 2 cm (3/4)” gauge approved stone ballast in the proportions of 1:1½;3 in outer work excluding supply of reinforcement and its bending but including its fixing and bending the same with 24 B.W.G.G.I. Binding wire and including necessary centering and shuttering etc. and also including Supply of all materials, labours and T&P etc. required for proper completion of work binding wire cost being including in the item but for R.C.C. work.Column

R.C.C. work with cement approved course sand and 2 cm (3/4)” gauge approved stone ballast in the proportions of 1:1½;3 in outer work excluding supply of reinforcement and its bending but including its fixing and bending the same with 24 B.W.G.G.I. Binding wire and including necessary centering and shuttering etc. and also including Supply of all materials, labours and T&P etc. required for proper completion of work binding wire cost being including in the item but for R.C.C. work. Lintel & Sunshed

R.C.C. work with cement approved course sand and 2 cm (3/4)” gauge approved stone ballast in the proportions of 1:1½;3 in outer work excluding supply of reinforcement and its bending but including its fixing and bending the same with 24 B.W.G.G.I. Binding wire and including necessary centering and shuttering etc. and also including Supply of all materials, labours and T&P etc. required for proper completion of work binding wire cost being including in the item but for R.C.C. work. RCC for Beam

R.C.C. work with cement approved course sand and 2 cm (3/4)” gauge approved stone ballast in the proportions of 1:1½;3 in outer work excluding supply of reinforcement and its bending but including its fixing and bending the same with 24 B.W.G.G.I. Binding wire and including necessary centering and shuttering etc. and also including Supply of all materials, labours and T&P etc. required for proper completion of work binding wire cost being including in the item but for R.C.C. work.R.C.C. Slab

First Class bricks works in 1:6 cement and coarse sand of 1.25F.M. mortar in above plinth supply of all materials, labour and T&P etc. required for proper completion of the work. But in super structure in 230mm wall including providing scaffolding rope, chahlies fixing and removal. In Super Structure.

Providing and laying damp proof course 4.0cm thick with cement concrete 1:2:4 (1Cement: 2 Coarse sand : 4graded gtone aggregate 10mm nominal size) and curing complete. 2. Painting on D.P.C. with two coats of air blown bitumen 85/50 or 85/25 @ 1.70 kg/sqm approx including cost of fuel if any.

Providing & laying “Brick bat Coba” 100 mm thick laid with M-150 class brick bat coba 7.50 cm thick with gap of 15mm to each other 20mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with aerelic cement concrete water proofing compound filled gaps of coba & top of coba mortar mixed with water proofing compound in 1:4 cement and coarse sand mortar finished smooth & top mashed false square 30cmx30cm and side wall parapet shall be monotypic plaster wall upto 30cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand and masonry coba with top finishing plaster mixing with acetic water proofing compound @ 2% by weight & including supply of all materials labour T&P etc. required for proper completion of work and as per direction of E.I.C.

Supply of M.S. angle iron door, windows, ventilator frame made of approved M.S. angle iron wroght to required form including drilling hole, welding and reciting where necessary and also including supply of all materials, such as steel hinges of required size, nut & bolts etc. and also including all taxes, wastage and one coat of red oxide paint complete in all respect as per direction of Engineer in charge for proper completion of work at site of work.

Providing and fixing of M.S. angle iron Z section window (approved Section) with Specified design of grill out side openable design of window and gril as per approved drawing 10mmsq bar 75mm c/c and 3no. bar group @ 75mm and four group in horizontal including providing stay and one coat of red oxide primer excluding glass pans.

10mm thick plaster with cement mortar over brick work minimum thickness not to be less than 3/8”(5mm) thick including supply of all materials labour and T&P etc. required for proper completion of the work for proper completion of the work but with cement and approved coarse sand in 1:3 cement & fine sand of 1.25F.M. mortar. (Ceiling plaster)

15 mm thick plaster with cement mortar over brick work minimum thickness not to be less than 3/8”(10mm) thick including supply of all materials labour and T&P etc. required for proper completion of the work for proper completion of the work but with cement and approved coarse sand in 1:6 cement & fine sand of 1.25F.M. mortar. inside

12mm thick plaster with cement mortar over brick work minimum thickness not to be less than 3/8”(10mm) thick including supply of all materials labour and T&P etc. required for proper completion of the work for proper completion of the work but with cement and approved coarse sand in 1:6 cement & fine sand of 1.25F.M. mortar. in outside

20mm thick plaster 1:2 consisting of one cement& two coarse sand liad in panels . Finished with 3mm Floating coat of neat cement including supply of materials labour and T&petc.

Providing and laying of 20mm thick Kota stone flooring over 20mm thick base of Cement mortar 1:4 (1cement: 4 coarse sand) laid over jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete.

Supply and fixing 5mm thick China white Glazed tiles in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry jointing and polishing complete including supply of all materials labour and tools etc. required for completion of the work . (Size of tiles upto 200X300 mm) in flooring (Kajaria, Johnson, Somany, NITCO, AGL of approved design, colour and shade)

Supply and fixing 5mm thick China white Glazed tiles in flooring or in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry jointing and polishing complete including supply of all materials labour and tools etc. required for completion of the work . (Size of tiles upto 200X300 mm) in wall(Kajaria, Johnson, Somany, NITCO, AGL of approved design, colour and shade)

Providing and fixing Granite stone gang cut Mirror polished ove vanity counter and platform

Providing edge Moulding to 18mm thick Marbal stone counters Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by engineer in charge.

Providing and laying of 20mm thick Kota stone flooring over 20mm thick base of Cement mortar 1:4 (1cement: 4 coarse sand) laid over jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete.

Supply and fixing of 35cm (1.1/4”) thick Commercial Quality (Kanju) Sitapur ply or other approved ply wood flush shutters.

S/Fixing of aluminium door frame/Shutter glazed as per specification.

Providing and Fixing Oxidized door fittings

Fixing Panes of glass with equal or equivalent ISI marked quality putty Brads and springs and including supply of all materials and labour ete complete. (3.80 to 4.7mm thick)(Saint Gobain, AIS, Modiguard)

Providing and laying white cement putty of avg. thickness 1mm of approved brand and manufacture over plaster wall (Birla, J.K. Putty)

Weather coat two coat coats------- Finishing walls with Acrylic Smooth exterior paint of required shade 13.46.1 New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) (Nerolac, Asian, Berger)

One Priming coat and two coat Oil bound distemper on new work including supply of all materials, labours and T&P etc. required for proper completion of the work (S.I.No. 649.+650)(Nerolac, Asian, Berger)

Painting or Varnishing on iron works in small areas or new wood work with one coat of ready mixed priming paint & one coat of approved superior quality ready mixed paint or clear synthetic varnish including Supply of all materials labour and T&P etc. required for proper completion of the work. Paint to be used should confirm to the ISI no.103 1950 (In two coat.) wood work.(Nerolac, Asian, Berger)

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.shoe 110mm

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.coupler 110mm

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Bend 87.5 degree

P/F S.S. railing in ramps

Providing & laying of 8 to 10mm thick ivory or light shade Vitrified tiles of 600mmX600 mm size in flooring or skirting laid with 1:3 ( 1cement : 3 Coarse sand) finishing with cement slurry & with pigment grouting & polishing complete i/c supply of all materials, labour T&P required for proper completion of work. in Skiting (Kajaria, Johnson, Somany, NITCO, AGL of approved design, colour and shade)

Providing and injecting chemical for peri constructional Anti-termite and creating and chemical barrier under and around the column pits wall trenches basement excavation top surface if plinth filling jun ction of wall and floor. Along the external per meter of binding expansion joints currounding of pipes and conduit etc. complete. (plinth area of the building at 6313 (part 2013) IMIDACLOPRID SC 30.5 concenterate or any othe approved material sush as Hepthachlor of Chlordane wall be used. The rate of application of chemical em'ulsion shall be as follows :- treatment of top surface of plinth filling 5 liters per sqm.

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. (SAIL, Tata Steel ltd, Jindal Steel & Power ltd and Jindal Saw ltd.)

Apron (Academic Building )

E/W in filling including in ordinary soil , by cartage in embankment to be in 20 cm (8") layers including ramming & dressing the surface to required levels and slopes etc. complete work (253)

Excavation in foundation in black cotton soil (in Bundelkhand area) including lift upto 1.5 m. and lead upto 30 m. and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by Engineer-in-charge a distance of 30 m. from the foundation (Drain/Edging).

First Class bricks works in 1:4 cement and course sand of 1.25F.M. mortar in above plinth supply of all materials, labour and T&P etc. required for proper completion of the work. But in super structure in 115mm wall including providing scaffolding rope, chahlies fixing and removal.

Cement concrete in 1:4:8 with cement, sand and (22.40-43)mm granite stone ballast (crusher broken) in foundation including supply of all materials, labours and T&P etc. required for proper completion of work.

Supply and filling of Sand also including supply of all materials, labour and T&P etc. required for proper completion of the work.

25mm(1½”) thick 1:2:4 plain cement concrete floor with cement, approved coarse sand and 2cm(3/4”) graded approved stone laid in panels finished with 3mm. (1/8”) flooring coat of neat cement or cement and marble dust in 5:1 as specified over removing and over lapping mortar at the joints of panel sand removing any and giving them a uniform finish including Supply of all materials labour and T&P etc. required for proper completion of the work.

First Class bricks works in 1:6 cement and coarse sand of 1.25F.M. mortar in above plinth supply of all materials, labour and T&P etc. required for proper completion of the work. But in super structure in 230mm wall including providing scaffolding rope, chahlies fixing and removal. In Super Structure.

Providing and fixing Chequrred floor tile 300x300mm size in Ramp

Providing and fixing Green Boarrd 8'x4' size

Extra work in lab (Academic Building )

First Class bricks works in 1:4 cement and course sand of 1.25F.M. mortar in above plinth supply of all materials, labour and T&P etc. required for proper completion of the work. But in super structure in 115mm wall including providing scaffolding rope, chahlies fixing and removal. In Super Structure work.

R.C.C. work with cement approved course sand and 2 cm (3/4)” gauge approved stone ballast in the proportions of 1:1½;3 in outer work excluding supply of reinforcement and its bending but including its fixing and bending the same with 24 B.W.G.G.I. Binding wire and including necessary centering and shuttering etc. and also including Supply of all materials, labours and T&P etc. required for proper completion of work binding wire cost being including in the item but for R.C.C. work. R.C.C. Plate form in lab

15 mm thick plaster with cement mortar over brick work minimum thickness not to be less than 3/8”(10mm) thick including supply of all materials labour and T&P etc. required for proper completion of the work for proper completion of the work but with cement and approved coarse sand in 1:6 cement & fine sand of 1.25F.M. mortar. inside

Providing and laying white cement putty of avg. thickness 1mm of approved brand and manufacture over plaster wall (Birla, J.K. Putty)

Providing and laying of 20mm thick Kota stone flooring over 20mm thick base of Cement mortar 1:4 (1cement: 4 coarse sand) laid over jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete.

Providing and fixing cup board shutters with 25 mm thick veneered particle board IS : 3097 marked, exterior grade (Grade I), of approved make, including IInd class teak wood lipping of 25 mm wide x 12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of Engineer-in-Charge.With decorative veneering on one side and commercial veneering on other side

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :100 mm

Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. Triple strip vertical type

Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : size Sink 450X200mm (Parryware, Hindware, Jaguar, Cera, Johnson pedder)

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.75 mm diameter

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 25 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.115 mm nominal dia Pipes

Sanatory Work (Academic Hostel)

Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests (Parryware, Hindware, Jaguar, Cera, Johnson pedder)

Providing and fixing C.P. brass bib cock of approved quality conformingto IS:8931 :15 mm nominal bore (Make :-L&k, ARK, Kohler)

Providing and fixing white vitreous china pedestal type water closet(European type) with seat and lid, 10 litre low level white vitreouschina flushing cistern & C.P. flush bend with fittings & C.I.brackets,40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid (Parryware, Hindware, Jaguar, Cera, Johnson pedder)

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board Size 450X300X150 mm

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore 15 mm Nominal bore(Make :-L&k, ARK, Kohler)

Providing and fixing 600x450 mm beveled edge mirror of superiorglass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washerscomplete. (Saint Gobain & Modiguard, HNG)

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.450 mm long towel rail with total length of 495 mm,78 mm wide and effective height of 88 mm, weighing not less than 170 gms

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.

Providing and fixing PTMT grating of approved quality and colour. 150 mm nominal size square 100 mm diameter of the inner hinged round grating

Providing and fixing G.I. pipes complete with G.I. fittings and clamps,i/c cutting and making good the walls etc.Internal work - Exposed on wall 15 mm dia nominal bore (Tata, Jindal, Surya GI Pipe Fitting)

Providing and fixing G.I. pipes complete with G.I. fittings and clamps,i/c cutting and making good the walls etc.Internal work - Exposed on wall 20 mm dia nominal bore (Tata, Jindal, Surya GI Pipe Fitting)

Providing and fixing G.I. pipes complete with G.I. fittings and clamps,i/c cutting and making good the walls etc.Internal work - Exposed on wall .25 mm dia nominal bore (Tata, Jindal, Surya GI Pipe Fitting)

Providing and fixing G.I. pipes complete with G.I. fittings and clamps,i/c cutting and making good the walls etc.Internal work - Exposed on wall . 32 mm dia nominal bore(Tata, Jindal, Surya GI Pipe Fitting)

Providing and fixing G.I. Union in G.I. pipe including cutting andthreading the pipe and making long screws etc. complete (New work) : 25 mm dia nominal bore (Tata, Jindal, Surya GI Pipe Fitting)

Providing and fixing G.I. Union in G.I. pipe including cutting andthreading the pipe and making long screws etc. complete (New work) :32 mm dia nominal bore(Tata, Jindal, Surya GI Pipe Fitting)

Providing and fixing gun metal gate valve with C.I. wheel of approvedquality (screwed end) :32 mm nominal bore (ARK, Kohler ,L&k)

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (Sintex or as approved by Engineer-in Charge)

Providing, laying and jointing PVC SWR pipes of Type A as per IS 13592 of approved make for soil, waste and vent pipes with solvent joints including necessary fittings like bends, tees, Y, hanger bars of required length at regular intervals etc,including cutting and making good masonry or concrete floor, walls for taking the pipelines outside the building into the ducts / crossing of beams and testing of pipelines, Fixing at wall/ceiling level supported by galvanized steel clamps & hangers etc. Making proper connection with joint as required as per manufacturer. Cutting, chases / holes in floors / walls / slab including making good the walls, ceiling etc. all complete as per specifications and as directed by the engineer incharge.110mm Dia PVC SWR Pipe Type'A'

Providing, laying and jointing PVC SWR pipes of Type A as per IS 13592 of approved make for soil, waste and vent pipes with solvent joints including necessary fittings like bends, tees, Y, hanger bars of required length at regular intervals etc,including cutting and making good masonry or concrete floor, walls for taking the pipelines outside the building into the ducts / crossing of beams and testing of pipelines, Fixing at wall/ceiling level supported by galvanized steel clamps & hangers etc. Making proper connection with joint as required as per manufacturer. Cutting, chases / holes in floors / walls / slab including making good the walls, ceiling etc. all complete as per specifications and as directed by the engineer incharge.75mm Dia PVC SWR Pipe Type'A'

RAIN WATER COLLECTION FILTER TANK & BORING Size 3.00x3.00x3.00 (Academic Hostel)

Earth work in exavation in tank

Lean concrete in 1:4:8 in base

Brick work in drain in 1:4 cement :sand mortar

Pcc in 1:2:4 top layer over wall

20mm plaster in 1:3 cement sand morter with neat cement finish

Rcc in 1:1.5:3

Providing cutting bending MS bar rainforcement (1%)

Providing and filling stone grit

Providing and filling coarse sand

Tube well boring 150mm dia by rig machine

Providing and fixing PVC Casing pipe

Providing and fixing Filer jali

RAIN WATER HARESTING CHAMBER 45X45 Cm size (Academic Building )

Earth work in exavation in tank

Lean concrete in 1:4:8 in base

Brick work in drain in 1:4 cement :sand mortar

Pcc in 1:2:4 top layer over wall

20mm plaster in 1:3 cement sand morter with neat cement finish

Rcc in 1:1.5:3

Providing cutting bending MS bar rainforcement

Providing and laying NP2 Pipe in Rain water pipe line 150mm dia

making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : For pipes 100 to 250 mm diameter

Providing and fixing of G.I. Pipe 32 mm dia B class meadium

Septic Tank (50 user) (Academic Building )

earthwork exavation

sand Filling in foundation

pcc 1:4:8 cement sand nominal size40mm

Brickwork 1:4 cement & sand

20 mm plaster 1:3 cement sand mortar 597

Rcc 1:1.5:3 cement sand morter 20 mm nominal size(284)

40 mm pcc 1:2 cement sand 20 mm nominal size(665)

steel bar 1% Of slab (504)

Providing and fixing C.I. man hole chamber 600x600mm size in slab (19.18.1)

Providing and fixing C.I. vent pipe 100mm dia

Providing and fixing c.i. cowel guard 100mm dia

Providind and fixing 150mm dia inlet and out let pipe

Soke Pit (Academic Building )

Earth work in excavation in foundation/tank

Brick work in 1:3 cement:sand mortar in soak pit

Supply and filling of Brick bat bat in soak pit

R.c.c. work in 1:1.5:3 cement:sand:stone grit in Slab and beam

Providing cutting beding MS bar Reinforcement in slab @2%

Providind and fixing 150mm dia inlet and out let pipe

Main hole 600X600 (Academic Building )

earthwork exavation()

pcc 1:4:8 cement sand nominal size40mm

Brickwork 1:4 cement & sand

20 mm plaster 1:3 cement sand mortar

40 mm plaster 1:2:4 cement sand mortar

Rcc 1:1.5:3 cement sand morter 20 mm nominal size

cutting & binding of for steel

15 mm plaster 1:6 cement sand mortar

Electrical Work (ACADEMIC BUILDING)

Wiring point for light with 1.50 sq. mm. FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit pipe partly concealed in the wall,and partly laid in slab along with the reinforcement before concreting complete with 1.50 sq mm FRLSH PVC insulated multi strand copper conductor cable as earthwire drawn inside the conduit,piano type switch& ceiling rose/ angle/batten holder on 3 mm thick phenolic laminated backelite sheet etc. complete in all respects, as directed including matching colour wash.

Wiring point for fan/fresh air fan with 1.50 sq. mm. FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit pipe partly concealed in the wall,and partly laid in slab along with the reinforcement before concreting complete with 1.50 sq mm FRLSH PVC insulated multi strand copper conductor cable as earthwire drawn inside the conduit,piano type switch& ceiling rose on 3 mm thick phenolic laminated backelite sheet etc. complete in all respects, as directed including matching colour wash.

Wiring point for plug with 1.50 sq. mm. FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit pipe partly concealed in the wall,and partly laid in slab along with the reinforcement before concreting complete with 1.50 sq mm FRLSH PVC insulated multi strand copper conductor cable as earthwire drawn inside the conduit,piano type switch& socket on 3 mm thick phenolic laminated backelite sheet etc.complete in all respects, as directed including matching colour wash.

Wiring point for Exhaust fan with 1.50 sq. mm FRLSH PVC insulated mulatistrand single core copper conductor cable in PVC conduit pipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting complete with 14 SWG copper earth continuity wire, 15 Amp.piano type switch and ceiling rose on 3 mm thick phenolic laminated bakelite sheet etc. complete in all respects including matching colour wash.

Supply and fixing of Switch box 200 x 250 x 65 mm size of approved make made up of 1.00 mm thick ISI marked G.P. sheet all 4 corners folded & spot welded for screw and holes plugged with PVC Nylon caps. Two or more holes for pipe entry of 25.4 mm or upper and lower sides of the box. Holes Should be semi - shuttered type and fitted with heavy brass earth Piller duly screwed & brand name should be embossed. Box flushed in wall including cutting of brick work, fixing it to the level with cement sand mortar, including matching colour wash with s/o all materials, labour and T & P required for proper completion of work as directed at site by the Engineer in charge.

S/W of submain with two number 4.00 sq. mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in PVC conduit pipe concealed in wall, and partly laid in slab along with reinforcement before concreting with one number 2.50 sq mm FRLSH PVC insulated multi strand copper conductor cable as earth continuity wire drawn in conduit. respects.

S/F of 32 Amp. Four pole Change over switch on 25 mm x 25 mm x 3 mm angle iron frame , including the cost of labour, T&P,painting and other material required for proper completion of the work as per direction and satisfaction of Engineer in charge.

Supply & laying of aluminium conductor PVC insulated armoured served sheated cables 1100 Volt grade at a depth of 750 mm below ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M S clamps of suitable size or as directed by the Engineer-Incharge, complete in all respeted.The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 16 sq. mm x 4 core

S/F of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. comolete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge. 16 sq. mm x 4 core

S/F fo palm or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tape and making connection etc. comolete in all respect.as per direction of Engineer - Incharge. 16.00 sq.mm.

Supply and laying of 25 mm x 3 mm G.I. strip from earth electrode directly in the ground as required complete in all respects.

Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length 2000 mm, Length up to 2000 mm, outer pipe dia 50 mm , inner dia 25 mm , terminal dia 12 mm, outer G I pipe of 16 SWG and inner G I pipe of 12 SWG with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of rateining capacity along with 30 cm square C.I. frame with hinged cover and masonary housing (from electrode terminal to switch board cost of 25 x 3 mm G I strip will be extra) Make: As approved in U.P.P.W.D. & C.P.R.I. Certified.

S/F of 6 - 32 Amp. SP MCB (10KA) C Curve , CAT-A

S/F of 32 Amp. DP MCB (10KA) C Curve , CAT-A

S/F of 40 Amp. FP MCB (10KA) C Curve , CAT-A

S/F Surface/ flush mounting 12 ways SPN distribution board with additional metal door without MCB complete in all respect and as directed at site by Engineer in charge. CAT - A

S/F Surface / flush mounting 6 ways TPN distribution board with additional metal door without MCB complete in all respect and as directed at site by Engineer in charge. CAT - A

Supply and fixing danger board fabricated from 10 gauge. M.S. Sheet as per I.E. Rules.

S/F of 16 SWG M.S. durm with louvers duly painted including making hole in the wall for exhaust fan and finishing properly complete in all respects .

S/F of crimping, solderless, copper tin electroplated lugs of Dowells / Ismail make suitable for 1.5 sq. mm. To 6 sq.mm cables, including tapping with insulating tape, complete in all respect.

S/F of Power plug with 15 Amp./ 250 V flush type switch and 5 pin 15A / 250 V flush type universal socket in suitable M S box of 175 mm x 100 mm x 50 mm size with phenolic laminated bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer.

S/F of Hexagonal fan box with hexagonal / Round G P fan box of approved make made up of 1.00 mm thick ISI marked G P sheet spot welded four to eight holes for pipe entry of 25.40 mm on upper and lower sides of the box . Holes should be semi shuttered type with 0.50 mm G. P. sheet made upper and lower cover duly screwed fitted with 300 mm round zinc coated M. S. Bar x 12 mm and brand name should be embossed. Fixing with wiring conduit laid in the R.C.C. roof before concreating along with supply of all material, labour, T&P etc. required for proper completion of the work.

S/F of electronic fan regulator 120 - 280 V. ISI marked, on the existing switch board including making connections, required material, labour T/P etc.for proper completion of work to the satisfaction of Engineer in charge of work.

S/F of Recess / Surface / Pendent mounting round 15 to 18 watt LED Down lighter having powder coated die cast aluminium housing with heat sink, diffuser / Reflector and driver set complete in all respects. CAT - AAA

S/F of LED Tube light with batten suitable for up to 1 x 22 watt LED tube light including tube on surface complete in all respects. Cat. AAA

S/F of LED Street Light fitting having die cast aluminium body and diffuser with driver set suitable for 45 watt to 50 watt, confirming to IP 66 protection complete in all respects. CAT - AAA

S/F of Ceiling fan 1200 mm sweep, Double ball bearing , Capacitor type ISI marked complete. etc. Usha / Crompton Greaves / Bajaj / Khaitan make.

S/F of Exhaust fan (Not fresh air fan) 300 mm sweep, Double ball bearing complete on the existing hole with suitable size of rag bolts, nuts and washers etc. Complete in all respects. Usha / Crompton Greaves / Bajaj make.

S/F of Exhaust fan 450 mm sweep, Double ball bearing ISI Marked complete on the existing hole with suitable size of rag bolts, nuts and washers etc. Complete in all respects. Usha / Crompton Greaves / Bajaj make.

S/F of Bakelite fan box sheet on existing fan box complete in all respects.

S/F of 32mp / 415 Volt Rewireable Type (kit-kat) Fuse unit- 3 No. & 1 No. Neutral link on T.W. wooden board with the help of ragbolt / hold fastner complete in all raspects.

S/F of LED Bulb 12 - 15 watt. Bajaj / Crompton / Philips make.

S/L of G.I. Pipe 50 mm B class for laying of cable in road or on wall with the help of M S 'C' clamp and rag bolt or hold fastner.

Supply and fixing of 3 phase, 100amp , Aluminium Bus bar chamber of approved make complete including required labour , material and T & P For proper completion of work.

SITC OF 30 watt all in one integrated Solar street light without hybdid switch Bajaj / Havells make with 6.meter long G.I. Pipe , B class including painting , foundation,and erection with anticlimbing device, complete including required labour, T & P for proper completion of work.

Fire Extinguisher work at kasturba gandhi vidhaylay ( Acadmic building)

Supply and fixing of fire extinguisher, ABC Type 4.00 kg. capacity (ISI Marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.

Supply and fixing of C02 type fire extinguisher 4.5kg. capacity (ISI Marked IS : 2878 & TAC approved) complete with initial charge and wall bracket along with supply of all materials and labour for proper completion of work.

GROUND FLOOR (Hostel Building)

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.

Cement concrete in 1:4:8 with cement, sand and 4cm .(1.5") gauge Approved granite stone ballast (crusher broken) in foundation including supply of all materials, labours and T&P etc. required for proper completion of work.

R.C.C. work with cement approved course sand and 2 cm (3/4)” gauge approved stone ballast in the proportions of 1:1½;3 in Plinth bend excluding supply of reinforcement and its bending but including its fixing and bending the same with 24 B.W.G.G.I. Binding wire and including necessary centering and shuttering etc. and also including Supply of all materials, labours and T&P etc. required for proper completion of work binding wire cost being including in the item but for Raft foundation

Sand Filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8 km (5 miles) from the side of work and including watering , dressing etc. rate to including cost of all material, labour and T&P etc. required for proper completion of the work .(rate is including royality.)

First class brick work in 1:6 cement and fine sand of 1.25 FM. Mortar in foundation and plinth including supply of all materials , labour and T& P etc. required for proper completion of the work.

First class brick work in 1:6 cement and fine sand of 1.25 FM. Mortar in foundation and plinth including supply of all materials , labour and T& P etc. required for proper completion of the work.

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. up to floor five level,excluding cost of centering, shuttering, finishing and reinforcement :.R.C.C. Footing in M20

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. up to floor five level,excluding cost of centering, shuttering, finishing and reinforcement :R.C.C. Column in M20

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. up to floor five level,excluding cost of centering, shuttering, finishing and reinforcement : R.C.C. Plinth Bend

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. up to floor five level,excluding cost of centering, shuttering, finishing and reinforcement :R.C.C. Lintel Beams

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. up to floor five level,excluding cost of centering, shuttering, finishing and reinforcement : R.C.C. Loft in M20

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. up to floor five level,excluding cost of centering, shuttering, finishing and reinforcement : R.C.C. Stair in M 20

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. up to floor five level,excluding cost of centering, shuttering, finishing and reinforcement : R.C.C. Slab Beam in M 20

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns,pillars, piers, abutments, posts and struts etc. up to floor five level,excluding cost of centering, shuttering, finishing and reinforcement : G.F. R.C.C. Slab in M20

Supply and filling of carted earth under plinth by tractor trolly with watering ramming etc complete.

Sand Filling in Plinth including supply of necessary quantity of sand from a distance not exceeding 8 km . ( 5 miles ) from the from the site of work and including watering dressing etc. Rate to including cost of all material , labour and T&P etc. required for proper completion of the work .( Rate is including Royality)

Cement concrete in 1:4:8 with cement, sand and 4cm .(1.5") gauge Approved granite stone ballast (crusher broken) in foundation including supply of all materials, labours and T&P etc. required for proper completion of work.

40 mm thick cement concrete flooring with concrete hardener topping,under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarsesand : 4 graded stone aggregate 20 mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardenermix : 2 graded stone aggregate 6 mm nominal size) by volume, hardeningcompound mixed @ 2 litre per 50 kg of cement or as per manufacturer’sspecifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.

First class brick work in 1:6 cement and fine sand of 1.25 FM. Mortar in Super str. including supply of all materials , labour and T& P etc. required for proper completion of the work. But in super structure . Including necessary cutting and moulding of brick as required and also including honey comb brick work , thickness of wall not to be less than 1.5 brick thick . Add extra labour & but for wall of one brick (230mm) thick .add for extra labour.

First class brick work in 1:4 cement and fine sand of 1.25 FM. Mortar in Super str. including supply of all materials , labour and T& P etc. required for proper completion of the work. But in super structure . Including necessary cutting and moulding of brick as required and also including honey comb brick work , thickness of wall not to be less than 1.5 brick thick . Add extra labour & but for wall of half brick (4 1/2")(115mm) thick .add for extra labour.

6-10 mm ceiling plaster in 1:3 cement:sand mortar inluding all material labour T&P and safloding omplete

15 mmplaster in 1:6 cement:sand mortar in rough surface inluding all material labour T&P and safloding complete . Including internal rounded angles chamfers and rounded angles not exceeding 80 mm . In girth and finished even and smooth .

12 mmplaster in 1:6 cement:sand mortar in rough surface inluding all material labour T&P and safloding complete . Including internal rounded angles chamfers and rounded angles not exceeding 80 mm . In girth and finished even and smooth .

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Matt finish Rectified flooring in toilet floor (Kajaria, Johnson, Somany, NITCO, AGL of approved design, colour and shade)

Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.dado/skirting in toilet (Kajaria, Johnson, Somany, NITCO, AGL of approved design, colour and shade_)

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Entrance Door (ED) Aluminium door

Sliding Door

Providing and fixing of M.S. angle iron Z section window (approved Section) with Specified design of grill out side openable design of window and gril as per approved drawing 10mmsq bar 75mm c/c and 3no. bar group @ 75mm and four group in horizontal including providing stay and one coat of red oxide primer excluding glass pans.

Supply and fixing of 32cm (1.1/4”) thick Commercial Quality (Kanju) Sitapur ply or other approved ply wood flush shutter doors.

Two coats of enamel paint over one coat of primer to give an even shade Door Painting two coat enemal paint

20mm Bearing plaster in 1:3 cement:sand mortar with neat finish including supply of materials labour and T&P etc. required for proper completion of the work.

Two coat oil bound distemper Distempering with dry distemper of approved brand and manufacture (two or more coats) of required shade on new work, over and including water thinnable priming coat to give an even shade.Two Coat Oil bound distempar inside(Nerolac, Asian, Berger)

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade New work Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm Two coat weather coat Apex/ultima (Nerolac, Asian, Berger)

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.(Birla, J.K. Putty)

Providing cutting bending MS bar Reinforcement in RCC Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.

2 cm.(3|4") thick cement plaster in dedo or skirting in 1:2 consisting of part yf cement and 2 parts of apporved coarse sand laid in panels. Finished with 3mm.(1|8") floating, coat of neat cement or cement and marble dust in ratio 5:1 including supply of materials labour and T&P etc. required for proper completion of the work.

Providing and fixing Glass pan equal or equivalent I.S.I marked quality putty . Drands and springs and including supply of all material and labour etc. complete.in window /ventilator (4.8 to 5.7 mm thick) (Saint Gobain, AIS, Modiguard)

Supply & fixing glavanished Mosquitos proof,heavey quality iron wire gauge or expanded metal of heavey quality over windoes and i/c supply and fixing of C.P. teak wood/Ms flat battens 8 cm X 1 cm (3"X3/8") and i/c supply of necessary screws, all materials, labour and T&P etc. required for proper completion of the work.

Providing and fixing on wall face Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes 110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Shoe 110mm

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Coupler 110mm

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5°

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand)and making good the wall etc. complete.

Providing and fixing Oxidized door fittings

Plinth Protection (Hostel Building)

Sand Filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8 km (5 miles) from the side of work and including watering , dressing etc. rate to including cost of all material, labour and T&P etc. required for proper completion of the work .(rate is including royality.)

First class brick work in 1:4 cement and fine sand of 1.25 FM. Mortar in foundation and plinth including supply of all materials , labour and T& P etc. required for proper completion of the work.

Cement concrete in 1:4:8 with cement, sand and 4cm .(1.5") gauge Approved granite stone ballast (crusher broken) in foundation including supply of all materials, labours and T&P etc. required for proper completion of work.

cement concrete flooring 1:2:4 (1 cement ;2 corse sand :4 graded stone aggregate of size 20 mm nominal size ) laid in one layer finished with floating cost of neat cement (40 mm thick floor)

Providing and fixing glass strips in joints of terrazo/ cement concrete floors.

Providing and fixing Granite stone in water quash platform and 600 high in wall Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge

Providing and laying of 20mm thick Kota stone flooring over 20mm thick base of Cement mortar 1:4 (1cement: 4 coarse sand) laid over jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete.

Providing and laying of 20mm thick Kota stone flooring over 20mm thick base of Cement mortar 1:4 (1cement: 4 coarse sand) laid over jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete.

Providing & laying of 8 to 10mm thick ivory or light shade Vitrified tiles of 600mmX600 mm size in flooring or skirting laid with 1:3 ( 1cement : 3 Coarse sand) finishing with cement slurry & with pigment grouting & polishing complete i/c supply of all materials, labour T&P required for proper completion of work. in Skiting (Johnson, Kajaria, Asian, Somany, NITCO)

FIRST FLOOR (Hostel Building)

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :and super structure in M20 R.C.C. Column

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :and super structure in M20 R. C. C. Lintel Beams

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :and super structure in M20 R. C. C. Loft & Chajja

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :and super structure in M20 R.C.C. Stair

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :and super structure in M20 R.C.C. Slab Beam

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :and super structure in M20 F.F. R.C.C. Slab

40 mm thick cement concrete flooring with concrete hardener topping,under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarsesand : 4 graded stone aggregate 20 mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardenermix : 2 graded stone aggregate 6 mm nominal size) by volume, hardeningcompound mixed @ 2 litre per 50 kg of cement or as per manufacturer’sspecifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.

First class brick work in 1:6 cement and fine sand of 1.25 FM. Mortar in foundation and plinth including supply of all materials , labour and T& P etc. required for proper completion of the work. But in super structure . Including necessary cutting and moulding of brick as required and also including honey comb brick work , thickness of wall not to be less than 1.5 brick thick . Add extra labour & but for wall of one brick (230mm) thick .add for extra labour.

First class brick work in 1:4 cement and fine sand of 1.25 FM. Mortar in foundation and plinth including supply of all materials , labour and T& P etc. required for proper completion of the work. But in super structure . Including necessary cutting and moulding of brick as required and also including honey comb brick work , thickness of wall not to be less than 1.5 brick thick . Add extra labour & but for wall of half brick (4 1/2")(115mm) thick .add for extra labour.

Brick work with Class-150 class bricks instead of Class-75 informing to IS: 2222 -1991 in superstructure above plinth level upto floor five level in cement mortar 1:4 (1 cement : 4coarse sand) :115MM THICK WAL Half Brickwork For S. F. Parapet

6-10 mm ceiling plaster in 1:3 cement:sand mortar inluding all material labour T&P and safloding complete

15 mmplaster in 1:6 cement:sand mortar in rough surface inluding all material labour T&P and safloding complete . Including internal rounded angles chamfers and rounded angles not exceeding 80 mm . In girth and finished even and smooth .

Mild Steel or iron work in havy sizes such as trusses; builts up gates, door frames, record racks roof worek, giltes etc. wrought to required form including drilling holes, rivetting or welding where necessary , and also including supply of steel, bolts , nuts etc. & their fixing required for prpper completion of the work.

Providing and fixing of M.S. angle iron Z section window (approved Section) with Specified design of grill out side openable design of window and gril as per approved drawing 10mmsq bar 75mm c/c and 3no. bar group @ 75mm and four group in horizontal including providing stay and one coat of red oxide primer excluding glass pans.

Supply and fixing of 32cm (1.1/4”) thick Commercial Quality (Kanju) Sitapur ply or other approved ply wood flush shutter doors.

Two coats of enamel paint over one coat of primer to give an even shade

2 cm.(3|4") thick cement plaster in dedo or skirting in 1:2 consisting of part yf cement and 2 parts of apporved coarse sand laid in panels. Finished with 3mm.(1|8") floating, coat of neat cement or cement and marble dust in ratio 5:1 including supply of materials labour and T&P etc. required for proper completion of the work.

12 mmplaster in 1:6 cement:sand mortar in rough surface inluding all material labour T&P and safloding complete . Including internal rounded angles chamfers and rounded angles not exceeding 80 mm . In girth and finished even and smooth .

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (Birla, J.K. Putty)

Two coat oil bound distemper Distempering with dry distemper of approved brand and manufacture (two or more coats) of required shade on new work, over and including water thinnable priming coat to give an even shade.Two Coat Oil bound distempar inside (Nerolac, Asian, Berger)

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications;-Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @0.75 ltr /10 sqm (Nerolac, Asian, Berger)

Providing and fixing 10 mm thick 300x300mm resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge. (Kajaria, Johnson, Somany, NITCO, AGL of approved design, colour and shade)

Providing and laying rectified Glazed Ceramic Wall tiles of size 300x450mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigments etc., complete.(Kajaria, Johnson, Somany, NITCO, AGL of approved design, colour and shade)

Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin-charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mmsquare 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge :

Providing cutting bending MS bar Reinforcement in RCC Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.

20mm Bearing plaster in dedo or skirting 1:2 cement:sand mortar with neat finish including supply of materials labour and T&P etc. required for proper completion of the work.

Providing and fixing Glass pan equal or equivalent I.S.I marked quality putty . Drands and springs and including supply of all material and labour etc. complete.in window /ventilator (4.8 to 5.7 mm thick) (Saint Gobain, AIS, Modiguard)

Supply & fixing glavanished Mosquitos proof,heavey quality iron wire gauge or expanded metal of heavey quality over windoes and i/c supply and fixing of C.P. teak wood/Ms flat battens 8 cm X 1 cm (3"X3/8") and i/c supply of necessary screws, all materials, labour and T&P etc. required for proper completion of the work.

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Shoe 110mm

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Coupler 110mm

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5°

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand)and making good the wall etc. complete.

Providing and fixing Oxidized door fittings

Mild Steel or iron work in havy sizes such as trusses; builts up gates, door frames, record racks roof worek, giltes etc. wrought to required form including drilling holes, rivetting or welding where necessary , and also including supply of steel, bolts , nuts etc. & their fixing required for prpper completion of the work.

Fixing of Mild Steel or iron work in Heavy sizes such as trusses, Builts up gates, door frames, record racks roof work, glltes etc. wrought to required form including drilling holes, rivetting or welding where necessary, and also i/c supply of steel, bolts nuts etc. & their fixing required for proper completion of work.

Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 m dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge

Providing and laying of 20mm thick Kota stone flooring over 20mm thick base of Cement mortar 1:4 (1cement: 4 coarse sand) laid over jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete.

Providing and laying of 20mm thick Kota stone flooring over 20mm thick base of Cement mortar 1:4 (1cement: 4 coarse sand) laid over jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete.

Providing and fixing glass strips in joints of terrazo/ cement concrete floors.

Sanitry work (Hostel Building)

Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : (Parryware, Hindware, Jaguar, Cera, Johnson pedder)

Providing and fixing C.P. brass bib cock of approved quality conformingto IS:8931 : 15 mm nominal bore ( ARK, Kohler ,L&k)

Providing and fixing white vitreous china pedestal type water closet(European type) with seat and lid, 10 litre low level white vitreouschina flushing cistern & C.P. flush bend with fittings & C.I.brackets,40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid (Parryware, Hindware, Jaguar, Cera, Johnson pedder)

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps (Parryware, Hindware, Jaguar, Cera, Johnson pedder)

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 250 mm. (Neelkanth, Nirali)

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore (ARK, Kohler ,L&k)

Providing and fixing 600x450 mm beveled edge mirror of superiorglass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washerscomplete. (Saint Gobain & Modiguard, HNG)

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 450 mm long towel rail with total length of 495 mm,78 mm wide and effective height of 88 mm, weighing not less than 170 gms

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.

Providing and fixing PTMT grating of approved quality and colour.150 mm nominal size square 100 mm diameter of the inner hinged round grating

Internal work - Exposed on wall (Hostel Building)

Providing and fixing G.I. pipes complete with G.I. fittings and clamps,i/c cutting and making good the walls etc. 15 mm dia nominal bore (Tata, Jindal, Surya GI Pipe Fitting)

Providing and fixing G.I. pipes complete with G.I. fittings and clamps,i/c cutting and making good the walls etc. 20 mm dia nominal bore(Tata, Jindal, Surya GI Pipe Fitting)

Providing and fixing G.I. pipes complete with G.I. fittings and clamps,i/c cutting and making good the walls etc. 25 mm dia nominal bore(Tata, Jindal, Surya GI Pipe Fitting)

Providing and fixing G.I. pipes complete with G.I. fittings and clamps,i/c cutting and making good the walls etc. 32 mm dia nominal bore (Tata, Jindal, Surya GI Pipe Fitting)

Providing and fixing G.I. Union in G.I. pipe including cutting andthreading the pipe and making long screws etc. complete (New work) : 20 mm dia nominal bore(Tata, Jindal, Surya GI Pipe Fitting)

Providing and fixing G.I. Union in G.I. pipe including cutting andthreading the pipe and making long screws etc. complete (New work) : 32 mm dia nominal bore(Tata, Jindal, Surya GI Pipe Fitting)

Providing and fixing gun metal gate valve with C.I. wheel of approvedquality (screwed end) : 32 mm nominal bore (ARK, Kohler ,L&k)

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (Sintex or as approved by Engineer-in Charge)

Providing, laying and jointing PVC SWR pipes of Type A as per IS 13592 of approved make for soil, waste and vent pipes with solvent joints including necessary fittings like bends, tees, Y, hanger bars of required length at regular intervals etc,including cutting and making good masonry or concrete floor, walls for taking the pipelines outside the building into the ducts / crossing of beams and testing of pipelines, Fixing at wall/ceiling level supported by galvanized steel clamps & hangers etc. Making proper connection with joint as required as per manufacturer. Cutting, chases / holes in floors / walls / slab including making good the walls, ceiling etc. all complete as per specifications and as directed by the engineer incharge. 110mm Dia PVC SWR Pipe Type'A'

Providing, laying and jointing PVC SWR pipes of Type A as per IS 13592 of approved make for soil, waste and vent pipes with solvent joints including necessary fittings like bends, tees, Y, hanger bars of required length at regular intervals etc,including cutting and making good masonry or concrete floor, walls for taking the pipelines outside the building into the ducts / crossing of beams and testing of pipelines, Fixing at wall/ceiling level supported by galvanized steel clamps & hangers etc. Making proper connection with joint as required as per manufacturer. Cutting, chases / holes in floors / walls / slab including making good the walls, ceiling etc. all complete as per specifications and as directed by the engineer incharge. 75mm Dia PVC SWR Pipe Type'A'

Supply & fixing 100 dia inlet 75 mm (3”) outlet PVC Floor trap ( Supreme / Prince) first quality, ISI marked and supported with brick masonry seat as per site requirement with standard practice including cost and conveyance of all materials, taxes, labour charges etc, complete and as directed by the as direcyted by the Engineer-in-charge.

Providing and fixing C.P. Health faucet (spray Nozzle) of approved quality for European water closet conforming to IS:8931 a) 15 mm nominal bore

Construction of Septick tank 100 USER Size as per ISI sstandered 5.70x2.10x1.70 (Hostel Building)

Earth work in excavation in foundation/tank

Base concrete in 1:4:8 cement:sand:stone ballast

Brick work in 1:4 cement:sand mortar in septick tank wall

Brick work in 115mm wall in 1:4cement:sand mortar baffle wall

R.c.c. work in 1:1.5:3 cement:sand:stone grit in Slab and beam

Providing cutting beding MS bar Reinforcement in slab

20mm plaster in 1:3 cement:sand mortar with neat cement finish

P.c.c. in 1:2:4 cement:sand :stone grit in base to making slope

Providding and fixing C.I. man hole chembar 600x600mm size in slab

Providing and fixing C.I. vent pipe 100mm dia

Providing and fixing c.i. cowel guard 100mm dia

Providind and fixing 150mm dia inlet and out let pipe

Construction of Soak pit (Hostel Building)

Earth work in excavation in foundation/tank

Brick work in 1:3 cement:sand mortar in soak pit tank wall

Supply and filling of Brick bat bat in soak pit

R.c.c. work in 1:1.5:3 cement:sand:stone grit in Slab and beam

Providing cutting beding MS bar Reinforcement in slab

Providind and fixing 150mm dia inlet and out let pipe

Construction of man hole 45x45 cm size complete (Hostel Building)

Earth work in excavation in foundation/tank

Base concrete in 1:4:8 cement:sand:stone ballast

Brick work in 1:4 cement:sand mortar in septick tank wall

R.c.c. work in cover of man hole

Providing cutting bending MS bar reinforcement

20mm plaster in 1:3 c:sand mortar with neat finish

drain 25x15 cm size complete (Hostel Building)

Earth work in excavation in foundation/tank

Base concrete in 1:4:8 cement:sand:stone ballast

Brick work in 1:4 cement:sand mortar in septick

20mm plaster in 1::2 cement:sand mortar with neat finish

CONSTRUCTION OF TUBE WELL BORING AND INSTALLATION OF SUB.PUMP (Hostel Building)

Tube well Boring 4.5" dia by heavey Rig machine

Providing of 6 kg/cm2 Kisan make Casing pipe

Providing and fixing of KSB make submersiable Three phase 7 stage 1/2 HP pump(m.R.)

Providing and fixing starter pannel board

Providing and fixing of of sub. Cable

Providing and fixing of M.S.clamp

Providing and fixing of G.I. Pipe 32 mm dia B class meadium

Installation of pump labour/fixing

making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : For pipes 100 to 250 mm diameter

Providing and fixing of G.I. Pipe 32 mm dia B class meadium

Supply and laying of 80mm thick precast inter Lock concrete block manufacturing by Rubber Mouleded making each in size and shape (35No. Per sqm.) of minimum compressive strength 300kg/sqm over 40mm thick average stone dust with joints 3 mm thick with stone dust including labour and tempring & sweeping etc. complete to work. (Road)

Providing and laying GSB below paver bricks road

Laying and consolidation of WBM

Providing and mixing Stone dust for binding WBM20% of Stonen ballast

Electrical Work (Hostel Building)

Wiring point for light with 1.50 sq. mm FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit pipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting complete with 1.50 sq. mm FRLSH PVC insulated multi strand copper conductor cable as earthwire drawn inside the conduit, piano type switch & ceiling rose / angle / batten holder on 3 mm thick phenolic laminated backelite sheet etc. complete in all respects, as directed including matching colour wash.

Wiring point for two way light with 1.50 sq. mm FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit pipe partly concealed in the wall, and partly laid in slab along with the reinforcement before concreting complete with 1.50 sq. mm FRLSH PVC insulated multi strand copper conductor cable as earthwire drawn inside the conduit, piano type switch & ceiling rose / angle / batten holder on 3 mm thick phenolic laminated backelite sheet etc. complete in all respects, as directed including matching colour wash.

Wiring point for fan/fresh air fan with 1.50 sq. mm FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit pipe partly concealed in the wall, and partly laid in slab along with the reinforcement before concreting complete with 1.50 sq. mm FRLSH PVC insulated multi strand copper conductor cable as earthwire drawn inside the conduit, piano type switch & ceiling rose on 3 mm thick phenolic laminated backelite sheet etc. complete in all respects, as directed including matching colour wash.

Wiring point for plug with 1.50 sq. mm. FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit pipe partly concealed in the wall,and partly laid in slab along with the reinforcement before concreting complete with 1.50 sq mm FRLSH PVC insulated multi strand copper conductor cable as earthwire drawn inside the conduit,piano type switch& socket on 3 mm thick phenolic laminated backelite sheet etc.complete in all respects, as directed including matching colour wash.

Wiring point for Exhaust fan with 1.50 sq. mm FRLSH PVC insulated mulatistrand single core copper conductor cable in PVC conduit pipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting complete with 14 SWG copper earth continuity wire, 15 Amp.piano type switch and ceiling rose on 3 mm thick phenolic laminated bakelite sheet etc. complete in all respects including matching colour wash.

Supply and fixing of Switch box 200 x 250 x 65 mm size of approved make made up of 1.00 mm thick ISI marked G.P. sheet all 4 corners folded & spot welded for screw and holes plugged with PVC Nylon caps. Two or more holes for pipe entry of 25.4 mm or upper and lower sides of the box. Holes Should be semi - shuttered type and fitted with heavy brass earth Piller duly screwed & brand name should be embossed. Box flushed in wall including cutting of brick work, fixing it to the level with cement sand mortar, including matching colour wash with s/o all materials, labour and T & P required for proper completion of work as directed at site by the Engineer in charge.

Supply and fixing of Switch box 200 x 250 x 65 mm size of approved make made up of 1.00 mm thick ISI marked G.P. sheet all 4 corners folded & spot welded for screw and holes plugged with PVC Nylon caps. Two or more holes for pipe entry of 25.4 mm or upper and lower sides of the box. Holes Should be semi - shuttered type and fitted with heavy brass earth Piller duly screwed & brand name should be embossed. Box flushed in wall including cutting of brick work, fixing it to the level with cement sand mortar, including matching colour wash with s/o all materials, labour and T & P required for proper completion of work as directed at site by the Engineer in charge.

S/W of submain with two number 2.50 sq. mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm heavy duty (2 mm thick ) PVC conduit pipe concealed in wall, and partly laid in slab along with reinforcement before concreting with one number 1.50 sq mm FRLSH PVC insulated multi strand copper conductor cable as earth continuity wire drawn in conduit. respects.

S/W of submain with four number 2.50 sq. mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 25 mm dia heavy duty (2 mm thick ) PVC conduit pipe concealed in wall, and partly laid in slab along with reinforcement before concreting with one number 1.50 sq mm FRLSH PVC insulated multi strand copper conductor cable as earth continuity wire drawn in conduit. respects.

S/W of submain with two number 4.00 sq. mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in 20 mm dia heavy duty (2 mm thick ) PVC conduit pipe concealed in wall, and partly laid in slab along with reinforcement before concreting with one number 2.50 sq mm FRLSH PVC insulated multi strand copper conductor cable as earth continuity wire drawn in conduit. respects.

S/W of submain with four number 10.00 sq. mm FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable in PVC conduit pipe concealed in wall, and partly laid in slab along with reinforcement before concreting with two number 6.00 sq mm FRLSH PVC insulated multi strand copper conductor cable as earth continuity wire drawn in conduit. respects.

S/F of 100 Amp. Four pole Change over switch on 40 mm x 40 mm x 6 mm angle iron frame. Includingthe costof labour T & P, painting and other material required completion of the work as per direction and satisfaction of Engineer in charge.

Supply & laying of aluminium conductor PVC insulated armoured served sheated cables 1100 Volt grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps of suitable size or as directed by the Engineer-Incharge, complete in all respeted.The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 35.00 sq. mm x 3.50 core

S/F of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. comolete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge. 35.00 sq. mm x 3.50 core

S/F fo palm or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tape and making connection etc. comolete in all respect.as per direction of Engineer - Incharge. 25.00 sq.mm.

S/F fo palm or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tape and making connection etc. comolete in all respect.as per direction of Engineer - Incharge. 35.00 sq.mm.

Supply and laying of 25 mm x 3 mm G.I. strip from earth electrode directly in the ground as required complete in all respects.

Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length up to 2000 mm, outer pipe dia 50 mm , inner dia 25 mm , terminal dia 12 mm, outer G I pipe of 16 SWG and inner G I pipe of 12 SWG with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of rateining capacity along with 30 cm square C.I. frame with hinged cover and masonary housing (from electrode terminal to switch board cost of 25 x 3 mm G I strip will be extra) Make: As approved in U.P.P.W.D. & C.P.R.I. Certified.

S/F of 6 - 32 Amp. SP MCB (10KA) C Curve , CAT-A

S/F of 40 Amp. DP MCB (10KA) C Curve , CAT-A

S/F of 63 Amp. 4 Pole MCB (10KA) C Curve , CAT - A

S/F surface/ flush mounting 8 ways SPN distribution board without MCB complete in all respect and as directed at site by Engineer in charge. CAT - A

S/F surface/ flush mounting 12 ways SPN distribution board without MCB complete in all respect and as directed at site by Engineer in charge. CAT - A

S/F Surface / flush mounting 6 ways TPN distribution board with additional metal door without MCB complete in all respect and as directed at site by Engineer in charge. CAT - A

Supply and fixing danger board fabricated from 10 gauge. M.S. Sheet as per I.E. Rules.

S/F of 16 SWG M.S. durm with louvers duly painted including making hole in the wall for exhaust fan and finishing properly complete in all respects .

S/F of crimping, solderless, copper tin electroplated lugs of Dowells / Ismail make suitable for 1.50 sq. mm To 10.00 sq.mm cables, including tapping with insulating tape, complete in all respect.

S/F of shock treatment chart duly framed with glass and supported from back with hard board or soft board with supply of all material labour T&P for proper completion of work.

S/L of 1800 mm x 900 mm x 12 mm thick chequred rubber matting of tested quality.

S/F of power plug with 15 Amp. / 250V flush type switch and 5 pin 15 Amp./ 250 V flush type universal socket in suitable M.S. box of 175 mm x 100 mm x 50 mm size with phenolic laminated bakelite sheet cover 3mm thick fixed with brass machine screw and cup washer.

S/F of Hexagonal fan box with hexagonal / Round G P fan box of approved make made up of 1.00 mm thick ISI marked G P sheet spot welded four to eight holes for pipe entry of 25.40 mm on upper and lower sides of the box . Holes should be semi shuttered type with 0.50 mm G. P. sheet made upper and lower cover duly screwed fitted with 300 mm round zinc coated M. S. Bar x 12 mm and brand name should be embossed. Fixing with wiring conduit laid in the R.C.C. roof before concreating along with supply of all material, labour, T&P etc. required for proper completion of the work.

S/F of electronic fan regulator 120 - 280 V. ISI marked, on the existing switch board including making connections, required material, labour T/P etc.for proper completion of work to the satisfaction of Engineer in charge of work.

S/F of Recess / Surface / Pendent mounting round 15 to 18 watt LED Down lighter having powder coated die cast aluminium housing with heat sink, diffuser / Reflector and driver set complete in all respects. CAT - AA.

S/F of LED Tube Light Batten Fitting suitable for up to 1 x 22 Watt LED tube light on surface complete in all respects. CAT - AA.

S/F of LED Street Light fitting having die cast aluminium body and diffuser with driver set suitable for 45 Watt to 50 Watt. confirming to IP 66 protection complete in all respects. CAT - AA.

S/F of Ceiling fan 1200 mm sweep, Double ball bearing , Capacitor type ISI marked complete. etc. Usha / Crompton Greaves / Bajaj / Khaitan make.

S/F of Exhaust fan (Not fresh air fan) 300 mm sweep, Double ball bearing complete on the existing hole with suitable size of rag bolts, nuts and washers etc. Complete in all respects. Usha / Crompton Greaves / Bajaj make.

S/F of Exhaust fan 450 mm sweep ISI Marked heavy duty, Double ball bearing complete on the existing hole with suitable size of rag bolts, nuts and washers etc. Complete in all respects. Usha / Crompton Greaves / Bajaj/ panasonic make.

S/F of Bakelite fan box sheet on existing fan box complete in all respects.

S/F of 100 Amp / 415 Volt Rewireable Type (kit-kat) Fuse unit- 3 No. & 1 No. Neutral link on wooden board with the help of ragbolt / hold fastner complete in all raspects.

S/F of LED Bulb 12 - 15 watt. Bajaj / Crompton / Philips make.

S/F of water tight oblong bulkhead fitting of approved make complete with prismatic glass holder rubber gasket, G.I. Guard etc.

S/F of 35.00 sq. mm x 4 core umarmoured cable ISI marked for connection with G.I. support wire complete in all respects.

Fire Extinguisher work

S/F of fire extinguisher, ABC type 6.00 kg. capacity (ISI Marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all mateials and labour for proper completion of work.

S/F of fire bucket, round bottom made of G.I.sheet 9 - 11 litres capacity duly painted as per fire brigade design, supported on hanging chained and locked, initially filled with fine river sand, water as per directions of Engineer-in-charge.

JMD INFRASTRUCTURE