Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.8 LAdmitted-Finance | ₹5.8 L | L1 | Admitted-Finance |
| 2 | L2₹5.9 L+₹7,080 (1.21%)Admitted-Finance | ₹5.9 L+₹7,080 (1.21%) | L2 | Admitted-Finance |
| 3 | L3₹6.0 L+₹13,080.30 (2.24%)Admitted-Finance | ₹6.0 L+₹13,080.30 (2.24%) | L3 | Admitted-Finance |
| 4 | L4₹6.3 L+₹47,223.60 (8.10%)Admitted-Finance | ₹6.3 L+₹47,223.60 (8.10%) | L4 | Admitted-Finance |
| 5 | L5₹6.3 L+₹50,692.80 (8.69%)Admitted-Finance CW 545 SANJAY GANDHI TRANSPORT NAGAR NEW DELHI 110042 | NORTH | DELHI | 110042 | ₹6.3 L+₹50,692.80 (8.69%) | L5 | Admitted-Finance |
| Sl No | Description | Qty | Unit | JAI DURGA ENGINEERS AND CONTRACORS L6 | HYDROCON ENGINEERS L7 | P.K. Electricals L3 | Devraj Enterprises L5 | paramount systems L2 | Gupta Brothers L1 | Tushar Engineers L4 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.01 | Supply of 7.5 HP Submersible Pump Set fitted with dynamically balanced impeller mounted on stainless steel shaft with protection sleeve having stage bowls of closed grained bronze impeller complete in C.I Body. The pump will be directly coupled to required wet type induction motor of speed 2900 RPM suitable for operation on 3-4, 415V, 50Hz, AC supply, Discharge: 200 LPM, Head: 90 mtr, Stage 10. Make of Pump: BS/KSB/SU/As approved by DJB | 3 | Nos. | 96,000 ₹1,13,280 Lowest | 1,21,500 ₹1,43,370 | 1,14,240 ₹1,34,803.2 | 1,03,500 ₹1,22,130 | 1,39,500 ₹1,64,610 | 1,05,000 ₹1,23,900 | 98,700 ₹1,16,466 |
| 1.02 | Supply of Hut Type Feeder Piller Automatic LT Panel board suitable for 415 Volts, 3 phase, 50 Hz, 4 wire system for operation of up to15 HP submersible set, made out of not less than 2mm thick CRCA for load bearing members, and 1.6 mm for doors of panel, totally enclosed, dust and vermin proof floor mounted type The panel size 760mmX1360X300mm and having 1)63 AMP Change over-1No.2)63 AMP TPN MCCB-1 No.3) AMP. Meter 0-50 A-1No.4) Volt Meter-1No.5)Amp.& Volt Meter Selector Switches- 1 Set. 6) Auto Manual+ Light+ Control MCB SP 6 Amp- 1 No. each 7) CT-3Nos 8) push button ON/OFF light-2nos each 9)5 KVR Shunt capictor-1No. 10) Aluminum Bus bar size 25 mmX6mm-1 set. 11)15HP Star Delta Starter a) 32 Amp power contactor 3No b) Over load Relay 14-23 Amps. 1 No. c) Star deltaTimer 1 No. d) QT Timer -24 Hours -1 No. c) Motor protection relay flush mounting with display with thermal O/L, short circuit, earth fault, phase loss, unbalance, phase reversal, locked rotor protection 1 No. Make of accessories:-L&T/C&S/AE/as per DJB approved | 3 | Nos. | 1,56,000 ₹1,84,080 | 1,27,500 ₹1,50,450 | 1,35,660 ₹1,60,078.8 | 1,14,000 ₹1,34,520 | 1,23,000 ₹1,45,140 | 1,05,000 ₹1,23,900 | 89,100 ₹1,05,138 Lowest |
| 1.03 | Supply-Of M.S. Clamp of 600 mm Length, duly fabricated out-of 12.5 mm thick, 50 mm wide M.S.Plate for holding the Pipe of 50 mm dia. | 3 | Nos. | 2,670 ₹3,150.6 | 1,500 ₹1,770 Lowest | 3,213 ₹3,791.34 | 5,040 ₹5,947.2 | 3,000 ₹3,540 | 3,000 ₹3,540 | 3,900 ₹4,602 |
| 1.04 | Supply Of G.I. Pipe 50mm dia, Medium-class, each of 3" Meters Long, duly threaded on both ends, welded & fitted with G.I./ M.S. Flange of minimum thickness 6 mm on both ends with a Slot for Submersible-Cable. Welding of M.S Strips at both ends on flange. Make of Pipe: Jindal / TATA. | 60 | Nos. | 1,41,000 ₹1,66,380 | 1,65,000 ₹1,94,700 | 1,20,000 ₹1,41,600 Lowest | 1,35,000 ₹1,59,300 | 1,23,000 ₹1,45,140 | 1,20,000 ₹1,41,600 Lowest | 2,34,000 ₹2,76,120 |
| 1.05 | Supply of three core flat cable with bare bunched copper conductor insulated & sheathed with PVC for submersible pump motor with voltage grade upto 1100V of 4.0 sq mm. size in 100mtr. Roll. Make: Finolex/Havells/CCI | 3 | Roll | 42,000 ₹49,560 | 67,500 ₹79,650 | 74,970 ₹88,464.6 | 67,500 ₹79,650 | 45,000 ₹53,100 | 48,000 ₹56,640 | 480 ₹566.4 Lowest |
| 1.06 | Supply Of Tail-piece of Medium-Class G.I.-Pipe 500 mm Long with one-end threaded, as per out-let of Pump and another-end flanged, as per size of G.I. Pipe 50 mm dia. Make of Pipe: Jindal/TΑΤΑ. | 3 | Nos. | 2,700 ₹3,186 | 1,500 ₹1,770 Lowest | 2,856 ₹3,370.08 | 7,350 ₹8,673 | 3,000 ₹3,540 | 3,000 ₹3,540 | 3,900 ₹4,602 |
| 1.07 | Supply-Of G.I. Bend 90° x 50 mm dia, having Flange at both-ends One side M.S. Flange and other side G.I flange. | 3 | Nos. | 3,000 ₹3,540 | 1,500 ₹1,770 Lowest | 3,213 ₹3,791.34 | 1,680 ₹1,982.4 | 3,000 ₹3,540 | 3,000 ₹3,540 | 3,600 ₹4,248 |
| 1.08 | Supply-Of Nut-Bolts, %" dia of different size i.e. 1.5" & 2.5" Long, threaded of good quality. | 30 | Kg | 2,850 ₹3,363 Lowest | 3,000 ₹3,540 | 3,570 ₹4,212.6 | 3,600 ₹4,248 | 3,000 ₹3,540 | 3,000 ₹3,540 | 3,300 ₹3,894 |
| 1.09 | Supply-Of Rubber-packing for 50mm dia Flange. | 60 | Nos. | 1,260 ₹1,486.8 | 6,000 ₹7,080 | 1,440 ₹1,699.2 | 2,400 ₹2,832 | 1,200 ₹1,416 | 900 ₹1,062 Lowest | 1,140 ₹1,345.2 |
| 1.10 | Supply-Of Bore-Cover Plate of Size: 200 mm dia, made out from 6 mm 3 thick M.S.-Sheet in 2-Halves and a Circular-Hole of 50 mm dia in center with Locking arrangement by Nuts & Bolts. | 3 | Nos. | 3,300 ₹3,894 | 1,500 ₹1,770 Lowest | 3,213 ₹3,791.34 | 2,940 ₹3,469.2 | 3,600 ₹4,248 | 3,600 ₹4,248 | 7,500 ₹8,850 |
Tender Value
Refer Docs
EMD Value
₹16,900
Closing Date
28 May 2026, 11:15 amClosed
EE ENM M-7
DELHI JAL BOARD MU BLOCK PITAMPURA, DELHI-34
SIC of newly bored tube wells at J 38 Kirti Nagar M 35 Kirti Nagar F 12 Kirti Nagar in AC 25
2026_DJB_291744_5
NIT No. 03(2026-27)M-VII
Open Tender
Miscellaneous Works
Item Rate
30 days
EE ENM M-7
Please refer Tender documents.
3 documents required · 3 mandatory
₹500
Account No 50448339804
₹16,900
Yes
4 Jun 2026
21 May 2026
28 May 2026
21 May 2026
28 May 2026
21 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1.01 | Supply of 7.5 HP Submersible Pump Set fitted with dynamically balanced impeller mounted on stainless steel shaft with protection sleeve having stage bowls of closed grained bronze impeller complete in C.I Body. The pump will be directly coupled to required wet type induction motor of speed 2900 RPM suitable for operation on 3-4, 415V, 50Hz, AC supply, Discharge: 200 LPM, Head: 90 mtr, Stage 10. Make of Pump: BS/KSB/SU/As approved by DJB | 3 | Nos. | 80 | ₹240 |
| 1.02 | Supply of Hut Type Feeder Piller Automatic LT Panel board suitable for 415 Volts, 3 phase, 50 Hz, 4 wire system for operation of up to15 HP submersible set, made out of not less than 2mm thick CRCA for load bearing members, and 1.6 mm for doors of panel, totally enclosed, dust and vermin proof floor mounted type The panel size 760mmX1360X300mm and having 1)63 AMP Change over-1No.2)63 AMP TPN MCCB-1 No.3) AMP. Meter 0-50 A-1No.4) Volt Meter-1No.5)Amp.& Volt Meter Selector Switches- 1 Set. 6) Auto Manual+ Light+ Control MCB SP 6 Amp- 1 No. each 7) CT-3Nos 8) push button ON/OFF light-2nos each 9)5 KVR Shunt capictor-1No. 10) Aluminum Bus bar size 25 mmX6mm-1 set. 11)15HP Star Delta Starter a) 32 Amp power contactor 3No b) Over load Relay 14-23 Amps. 1 No. c) Star deltaTimer 1 No. d) QT Timer -24 Hours -1 No. c) Motor protection relay flush mounting with display with thermal O/L, short circuit, earth fault, phase loss, unbalance, phase reversal, locked rotor protection 1 No. Make of accessories:-L&T/C&S/AE/as per DJB approved | 3 | Nos. | 80 | ₹240 |
| 1.03 | Supply-Of M.S. Clamp of 600 mm Length, duly fabricated out-of 12.5 mm thick, 50 mm wide M.S.Plate for holding the Pipe of 50 mm dia. | 3 | Nos. | 80 | ₹240 |
| 1.04 | Supply Of G.I. Pipe 50mm dia, Medium-class, each of 3" Meters Long, duly threaded on both ends, welded & fitted with G.I./ M.S. Flange of minimum thickness 6 mm on both ends with a Slot for Submersible-Cable. Welding of M.S Strips at both ends on flange. Make of Pipe: Jindal / TATA. | 60 | Nos. | 80 | ₹4,800 |
| 1.05 | Supply of three core flat cable with bare bunched copper conductor insulated & sheathed with PVC for submersible pump motor with voltage grade upto 1100V of 4.0 sq mm. size in 100mtr. Roll. Make: Finolex/Havells/CCI | 3 | Roll | 80 | ₹240 |
| 1.06 | Supply Of Tail-piece of Medium-Class G.I.-Pipe 500 mm Long with one-end threaded, as per out-let of Pump and another-end flanged, as per size of G.I. Pipe 50 mm dia. Make of Pipe: Jindal/TΑΤΑ. | 3 | Nos. | 80 | ₹240 |
| 1.07 | Supply-Of G.I. Bend 90° x 50 mm dia, having Flange at both-ends One side M.S. Flange and other side G.I flange. | 3 | Nos. | 80 | ₹240 |
| 1.08 | Supply-Of Nut-Bolts, %" dia of different size i.e. 1.5" & 2.5" Long, threaded of good quality. | 30 | Kg | 80 | ₹2,400 |
| 1.09 | Supply-Of Rubber-packing for 50mm dia Flange. | 60 | Nos. | 80 | ₹4,800 |
| 1.1 | Supply-Of Bore-Cover Plate of Size: 200 mm dia, made out from 6 mm 3 thick M.S.-Sheet in 2-Halves and a Circular-Hole of 50 mm dia in center with Locking arrangement by Nuts & Bolts. | 3 | Nos. | 80 | ₹240 |
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.44 MB
BOQ_387219.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .