Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹11.5 LAccepted-AOC FLAT NO 602 THE ELEPHANT HEAD CGHS LTD PLOT NO 41 OPP AYUSHMAN HOSPITAL DWARKA SECTOR 10 SOUTH WEST DELHI 110075 | SOUTH WEST | DELHI | 110075 | L1 | Accepted-AOC DUE TO L1 | |
| 2 | L2₹12.3 L+₹67,473 (5.79%)Rejected-AOC 13 218 MASJID EXTEN SADAR BAZAR | L2 | Rejected-AOC HIGHER RATE | |
| 3 | L3₹12.9 L+₹1.2 L (10.6%)Rejected-AOC | L3 | Rejected-AOC HIGHER RATE | |
| 4 | L4₹14.4 L+₹2.7 L (23.4%)Rejected-AOC | L4 | Rejected-AOC HIGHER RATE | |
| 5 | L5₹15.0 L+₹3.3 L (28.5%)Rejected-AOC RZ A2 2 CHANAKYA PLACE PART I OPP C 1A BLOCK JANAK PURI NEW DELHI 110059 | NEW DELHI | WEST DELHI | DELHI | 110059 | L5 | Rejected-AOC HIGHER RATE |
Tender Value
Refer Docs
EMD Value
₹40,000
Closing Date
23 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NEW DELHI
GE NEW DELHI, SP MARG NAR ABHM GATE NO 5
REPAIR/ MAINT OF EXTERNAL ELECTRIC SUPPLY IN NAVY AREA UNDER GE NEW DELHI
2023_MES_624346_1
NIT No GE/ND-70/2023-24
Open Tender
Electrical and Maintenance Works
Item Rate
240 days
GE NEW DELHI
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Yes
GE NEW DELHI
₹40,000
Yes
15 Jan 2024
20 Oct 2023
25 Nov 2023
20 Oct 2023
23 Nov 2023
10 Nov 2023
Amount
M & L for excavation by trenchless boring technology for holes under road pavement, hard standing using ultra sound technique and engaging necessary machine suitable for 0.4 Mpa working pressure complete all as specified and directed Note:- marking good the disturbed surface shall deemed to be included in quoted rate.
Supply & Laying in replacement of XLPE LT cable 1100 volts grade heavy duty with XLPE insulated stranded aluminium conductor served with an inner sheathing of PVC Tape armoured with galvanized steel strip or wire and over all PVC Sheathed stranded conductor conforming to IS-7098 (Part-I) with latest amendments laid in tranches/fixed to wall/pole/laid in floor including necessary connections and suitable size of thimbling complete all as specified and as directed by Engineer-in-Charge of the following size. (Note :Required Excavation , returning filling and removing, sand cushioning , brick protection of cable shall be measured and paid under this item of schedule):-
25 sqmm 3.5 core
35 sqmm 3.5 core
50 sqmm 3.5 core
70 sqmm 3.5 core
95 sqmm 3.5 core
240 sqmm 3.5 Core
400 sqmm 3.5 Core
M&L for locating the fault in underground electrical power cable of any length & any type of 1100 grade LT cables, by arranging fault locating Machine & pin point the fault, cutting the cable at fault to fixing the joint including testing of the cable after locating fault and jointing cable including excavation and earth work in any type of soil complete all as specified and as directed. Note: (i) Jointing of cable shall be measured and paid separately under respective item of this Schedule. (ii) If fault is not rectified within 24 hours after receiving Message, the contractor shall be charged penalty for Rs 500/- per hour per complaint and shall be deducted from next payment due to contractor.
Supply , fixing testing and commissioning in replacement of cable joint kit for 1.1 KV grade cable for straingt through joint heat shrinkable type joint complete with jointing material and accessories suitable for following size of XLPE/PVC aluminium conductor cable :-
25 to 35 Sq mm cable of 3.5/ 4 core size
50 to 95 Sq mm cable of 3.5core size
185 to 400 Sq mm cable of 3.5 core size
Material & Labour for road cutting, including excavation, returning filling in, spreading, leveling well ramming in layers, soling with broken boulders/stones, WBM 7.5 cm thick coarse aggregate received from dismentling the existing road, premix, carpeting 25 mm thick using ready mix patch mate material, rolled and compacted for road patch repair work, complete all as specified and directed by Engr-in-Charge.
M&L for supply, erection, testing & commissioning of 8 metre high made out of 3 mm thick galvanized iron sheet hot dip octagonal street light pole in one segment with one longitudinal welding joint including galvanized MS sheet with window/door opening with one MCB SP 6 to 16 Amps & TPN connector block 40 Amps having flash cover including necessary earth work (excavation, returning filling & removal) in soft/loose soil, RCC (grade M20) in foundation as per recommended design of manufacturer considering safe soil bearing capacity at site including suitable size & minimum 04 Nos foundation bolts of minimum dia 22 mm & 750 mm long "J"-type alongwith nuts, washers, anchor plates and templates, 50 mm dia PVC pipe in foundation for entering cable complete including dismantling of PCC pole all as specified. The foundation details shall be as under:- (a) RCC foundation size below GL will be 600 mm x 600 mm x 1300 mm (depth) (minimum) and above GL shall be 300 mm high of same section. (b) Main reinforcement in RCC shall be 20 mm dia 8 Nos TMT steel bars in vertical and stirrups of 8 mm dia @ 190 mm c/c. ( c) Base plate and anchoring plate shall be of minimum size 225 x 225 x 16 mm thick. (d) RCC (grade M20) in foundation. (e) Anchoring bolts shall be of "J"-type 750 mm long and 22 mm dia MS rod. Make: Cat Pt No. HM-1109P of Crompton Greaves or equivalent in L& T/schneider
S&F of single arm bracket of minimum length 1.00 mtr,GI pipe duly fixed with necessary fixing arrangement complete all as specified.
Disconnecting HT supply and taking out ACB of any make and rating 630 Amps to 1250Amp and servicing by cleaning the fix and moving parts, removing dust particles by using high speed blower applying grease / jelly to moving mechanism and moving parts, tightening nut bolts of all the components of ACB and replacement of all unserviceable spares as required, testing commissioning and putting on the supply on load and testing with VI injecting instrument for full load test/calibration for work efficiently in the tripping circuit complete all as specified and directed by Engr-in-Charge. Note:- (i) Spares as required for replacement shall be of the same company as of existing make or as recommended by the Engr-in-charge. (ii) All Measuring equipments and T&P required shall be arranged by the contractor. (iii) any other activity/ minor items not listed/covered here and required during /completing the work for smooth functiong of system will have to be arranged by Contractor himself and for this purpose no extra cost will be paid. (iv) Major Spare parts shall be paid separately under relative item. (vi) A sum of Rs. 1000/- will be recovered from the contractor for non rectification of breakdown/fault or replacement of any unserviceable spares after 12 hours from lodging of complaint telephonically or verbaly. (vii) Thereafter Rs. 600/- will be added every day till rectification of fault or replacement of unserviceable spares complete all as specified and directed by Engr-in-Charge.
S&F in repair Earth Fault protection relay for ACB of capacity 1000 Amps complete all as specified and as directed.
S&F in repair 3 Phase Digital Ammeter including wiring from CT to meter and Bus bar complete all as specified and as directed. Make: As per existing
S&F in repair ON/OFF/Trip/ Ready to close indication including fixing charges and required wiring for ACB 's complete all as specified and as directed.
S&F in repair Breaker Control Switch (TNC) to operate ACB's including fixing charges and required wiring for ACB's complete all as specified and as directed.
Supply only in replacement manual charging handle suitable for LT ACB of any make and rating 630 Amps to 1250 Amps as per existing make and model complete all as specified and directed by Engr-in-Charge.
Supply only in replacement UVR under voltage release coil assembly suitable for LT ACB of any make and rating 630 Amps to 1250 Amps as per existing make and model complete all as specified and directed by Engr-in-Charge.
Supply only in replacement fixed/moving arching contacts suitable for LT ACB of any make and rating 630 Amps to 1250 Amps as per existing make and model complete all as specified and directed by Engr-in-Charge.
Supply only in replacement CT's of suitable ratio for LT ACB of any make and rating 630 Amps to 1250 Amps as per existing make and model complete all as specified and directed by Engr-in-Charge.
Supply only in replacement circuit draw out terminals suitable for LT ACB of any make and rating 800 Amps to 2500 Amps as per existing make and model complete all as specified and directed by Engr-in-Charge.
S&f In replacement of MCCB, 4 pole, 415 volt of capacity 100 amp, Ics=100% Icu, adjustable thermal setting 80-100% with breaking capacity 16 KA including suitable thimbles all as specified Make-L&T/Havells/Legrand,
All as per Srl item No. 19 here-in-before but 125 Amps breaking capacity not less than 36 KA
All as per Srl item No. 19 here-in-before but 200 Amps breaking capacity not less than 36 KA
All as per Srl item No. 19 here-in-before but 250 Amps breaking capacity not less than 36 KA
All as per Srl item No. 19 here-in-before but 400 Amps breaking capacity not less than 36 KA
All as per Srl item No. 19 here-in-before but 630 Amps breaking capacity not less than 50 KA
All as per Srl item No. 19 here-in-before but 3 Pole 63 Amps breaking capacity not less than 16 KA
All as per Srl item No. 19 here-in-before but 3 Pole 100 Amps breaking capacity not less than 16 KA
All as per Srl item No. 19 here-in-before but 3 Pole 125 Amps breaking capacity not less than 16 KA
All as per Srl item No. 19 here-in-before but 3 Pole 160 Amps breaking capacity not less than 36 KA
All as per Srl item No. 19 here-in-before but 3 pole 200 Amps breaking capacity not less than 36 KA
All as per Srl item No. 19 here-in-before but 3 pole 250 Amps breaking capacity not less than 36 KA
All as per Srl item No. 19 here-in-before but 3 Pole 400 Amps breaking capacity not less than 36 KA
S&F in replacement MCB TPN/ Isolator 4P from 63 Amps 415 volts, 'C' Series 10 KA as per site requirement and as directed of approved make. (Make : Legrand/L&T/Havells)
S&F in replacement MCB TPN/ Isolator 4P from 100 Amps 415 volts, 'C' Series 10 KA as per site requirement and as directed of approved make. (Make : Legrand/ABB/Crabtree)
S&F in replacement MCB TP 3P from 63 Amps 415 volts, 'C' Series 10 KA as per site requirement and as directed of approved make. (Make : Legrand/L&T/Havells)
S&F in replacement of decorative LED type post top lanterns luminaire 40 watts, out door type for 360 degree indirect light with resistant to corrosion, glare free having better uniformity complete with suitable driver all as specified. Cat pt No. LPTO-40/CDL of Crompton Greaves make or equivalent in Philips/Havells
S&F in replacement of ARCHNER LED type post top light 45 watts, PDC aluminium housing with opal diffuser,IP- 65 protection ,input voltage 140-270 Volt, 50 HZ ,Total hormonic distortaion less than 10%,CCT- warm white and power factor greater than 0.95 out door type complete with GI decorative light pole of suitable length and size with necessary foundation for fixing the light pole all as specified. Cat pt No for light:-BGCPNP 45 W LED WW of Bajaj make or equivalent in Philips/crompton.
S&F LED bollard luminaire 10 watts, inverted pyramid tripod type with soft 360 degree light out door type having resistant to corrosion with better optics for uniform distribution complete with suitable driver & fixing nuts, bolts & washers all as specified. Cat pt No LBLSN-10CDL of Crompton Greaves or equivalent in Philips/Havells
S & F LED flood light luminaires 40 watts, 230 volts AC, out door type with pressure die cast aluminium housing resistant to impact and corrosion, glare free complete with lamp, driver complete all as specified. Make: CG Philips/Havells .
S & F LED flood light luminaires 90 watts, 230 volts AC, out door type with pressure die cast aluminium housing resistant to impact and corrosion, glare free complete with lamp, driver complete all as specified. Make: CG or equivalent in Philips/Havells .
S&F LED flood light luminaires 120 watt , 230 volt AC, out door type with pressure die cast aluminium housing resistant to impact and corrosion, glare free complete with lamp, driver complete all as specified.Make:Philips/Havells/CG
S & F in replacement of Integral aviation obstruction light luminaires comprising of aluminium housing with polycarbonate encloser including 230 volts, 50 Hz red coloured complete with all fixing accessories including minimum 01 RM medium grade GI tube of 25 mm bore with suitable reducer & suitable PCC foundation and all standard accessories all as specified. Make: Bajaj/Philips/Wipro.
S&F in replacement of LED Street light fitting 45 Watt Highly efficient made of pressure die cast aluminium housing with lens & toughened glass in replacement of old unservicable conventional security light fitting including fixing material ie MS clamp, Nut and bolt,anchor fastner washer etc complete all as directed . Make Havells/CG/Philips).
S&F in replacement of LED Street light fitting 120 Watt Highly efficient made of pressure die cast aluminium housing with lens & toughened glass in replacement of old unservicable conventional security light fitting including fixing material ie MS clamp, Nut and bolt,anchor fastner washer etc complete all as directed . Make Havells/CG/Philips).
S&F in replacement of LED Street light fitting 135 Watt Highly efficient made of pressure die cast aluminium housing with lens & toughened glass in replacement of old unservicable conventional security light fitting including fixing material ie MS clamp, Nut and bolt,anchor fastner washer etc complete all as directed . Make Havells/CG/Philips).
S & F in replacement of ornamental street light 120 Watt, 230 Volt AC ,outdoor type with spun aluminiumdesigner housing with clearacrylic for city beautification with IP 65 protection all as specified and directed by Engineer-In-Charge Cat No HLOSL-04-120-CWL or equivalent model in CG/Havells/Plilips.
Supply and fix sports light fitting 480 watt LED complete with suitable bracket , and fixing arrengment like bracket clamp of philips cat part No:-BVP621 LED504/CW 480W 220-240V NB GM or equivalent to Havell/CG.
S&F inreplacement of LED driver having input voltage as 200-260 Volts AC 50 HZ & output voltage as 12 Volt DC Suitable for 40 to 120 watt LED Fitting driver complete including making proper electic connectioncomplete all as specified Make as per sample
S&F in replacement of LED Fountain light 27 Watt water proof ,adjustable type IP 67 complete with stainless steel housing toughened glass LED lens of multicolour including necessary nut,bolt,anchor,fastner,washer etc complete all as specified and directed.
Supply & fix in replacement of SS fountain nozzle of suitable size (as per sample) for fountain outer ring all as specified and directed by Engr-In-Charge.
M&L for painting of steel tubuler pole after Cleaning and scraping with wire brush complete with two coat of aluminium paint over a coat of red oxide primer and applying one coat of cement base paint on PCC coping complete all as directed
supply and fix in replacement of decorative post top 40 Watt LED light pole with suitable length and size alongwith suitable foundation and nut bolts for fixing the pole and refix the light on newly mounted pole including taking down old rusted/broken pole of any type all as specified and directed by Engr-In-Charge.
Taking out complete 8 Mtr street light pole alongwith street light fitting from existing site and refixing the same pole with new foundation concret , including grouting with new nut bolts, and refixing/reconnecting the street light after completion of fixing of pole work complete all as specified and directed by Engr-in -Charge
M & L for plate earthing complete with galvanized mild steel plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (in earth pit not less than 2.25 meter deep below ground level) with the top edge of earth plate at a depth not less than 1.5 meter below normal ground level, the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15 cm on all sides and including GI strip 25X4 mm up to 7.50 RM bolted (with GI nuts, bolts & check nuts) and riveted to earth (Plate) electrode at one end and connected to main switch board / test point at the other and watering GI pipe (medium grade) 20 mm bore from bottom of earth pit to top of electrode and 40 mm GI pipe light grade for earth strip protection complete with earth pit in PCC 1:2:4 type B0 using 12 mm graded crushed stone aggregate, RCC cover, funnel, wire mesh etc including necessary excavation and earth work in any type of soil, returning filling in and removal of surplus soil all as specified.
Supply, Installation, testing and commissioning in replacement of 4 Pole Automatic Transfer Switch (ATS) 630 Amps, 415 Volts, 50 Hz, automatic/manual type with inbuilt time delay complete with enclosure all as specified. Make: Havells/Equivalent
Supply, installation, testing and commissioning in replacement of 4 pole phase corrector unit 100 Amps, 415 Volts, 50 Hz, automatic/manual type with inbuilt time delay complete with enclosure all as specified. Make: Havells/Universal Switchgear Control/Sinetrac.
S&F thermoplastic cable junction box with metric knock out for cable entry of size 200x160x98mm with 4 Nos of 200A aluminium busbar mounted on insulators, terminal and MCB 10A capacity including fixing with clamp 30x5mm iron flate, nuts, bolts and washer complete including providing of steel conduit of dia 32mm bore of length 1.60 mtr including earth work for taking out of cable and fixing complete all as specified and directed.
Supply only copper thimble ring/pin type of size 6 Sq mm to 10 Sqmm all as specified
Supply only aluminiumn thimble ring/pin type of size 16 Sq mm to 35 Sqmm all as specified
Supply only aluminium thimble ring/pin type of size 50 Sq mm to 120 sq mm all as specified
Supply only aluminium thimble ring/pin type of size 150 Sq mm to 300 sq mm all as specified
S & F in replacement of Auto/ Manual switch for security light panel as per sample
S & F in replacement of timer MCX 31,4 pole, 240 Volt, 50 HZ for security light panel all as specified and directed by Engr-In-Charge.
S & F in replacement of HRC Fuse 20 Amps for security light panelall as specified and directed by Engr-In-Charge.
S & F in replacement of fuse 800 Amps for fuse box all as specified and directed by Engineer-In-Charge.
S&F in replacement Off load Changeover Switch - 200 Amps 415 Volts 50 HZ 4 pole handle operated type inclduing taking down old change over complete all as specified and directed Make: Havells/L&T/Standard.
Supply and fixing in replacement of flexible tricolour/triglow LED rope light of 18 Meter length and wattage capacity of 6 Watt per meter & high brightness for outdoor application (light must be change its colour at equal interval) including driver and its connection complete all as specified and directed by Engr-In-Charge.Cat No/Model No 582183 of philips or equivalent model in wipro/crompton/havells.
verma enterprises
DHAIRYAE ENTERPRISES
J B Electricals
RUCHIKA ENGG.WORKS
SANJEEV ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .