8830ADDITION ALTERATION TO BLDGS AND COVERED SHED ENCLOSURE AT AF STATION JALAHALLI IN EAST AREA UNDER GE M AF STATION JALAHALLI BANGALORE

Amount

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for and rubbish off the premises complete all as specified and as directed. .

Material and labour for providing cement concrete 1:1.5:3 screed 25mm thick cement concrete mix admixed with fosroc nitoband or equivalent make at 2% by weight of cement, and cleaning the prepared concrete surfaces an applying Fosroc Nitoproof (Min 0.80mm dft) over a priming coat of Nitoproof primer or equivalent products including taking down existing water proofing treatment with tar felt including cement plaster from roof surfaces such as and disposal of the rubbish from the premises beyond 1.50Km out of defends land complete all as specified and directed.

Material and labour Providing cement concrete 1:2:4 type B1 using 20mm graded stone aggregate in roof, chajjas, coping, bed blocks and similar work including necessary form work complete all as specified and directed..

Material and labour for 1st quality non skid coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. laid over and including screed bed or bedding layer ,15 mm thick in Cement Mortar 1:4 including taking down existing tile and removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Material and labour for 1st quality ceramic coloured tiles of size 300x450mmx7 to 8mm thick, on verticals surfaces, set and jointed in neat cement slurry and pointed in coloured cementrendering 15mm thick in cement mortar 1:3 on wall including taking down existing tile with plaster and removing serviceable tiles to store and rubbish off the primises complete all as specified and directed.

Material and labour for rendering 5 mm thick in CM 1:3 on fair faces of brick work or concrete surfaces of ceiling finished even and smooth without using extra cement including taking down cement plaster on walls any description incl racking out joints hacking for key and scrubbing down with water etc and complete all as specified and as directed.

Material and labour for rendering 15 mm thick in CM 1:6 on fair faces of brick work/stone msny finished even and smooth without using extra cement ncluding taking down cement plaster on walls any description incl racking out joints hacking for key and scrubbing down with water etc and complete all as specified and as directed.

Supply and fixing in repair viterous china squatting pan 'Orissa pattern ' size 580 x 440mm white with integral foot rests incl connecting to 'P' or 'S' trap and to flush pipe anti syphonage pipe etc compete including provn of lime concerte bedding and making good to floor all as specified make complete all as specified and as directed. Make : Parryware/ Hindware/ Cera/ Somany

Supply and fixing in repairs PVC low level flushing cistern 10 Lit capacity including necessary brackets incl connecting flush pipe etc and making good the disturbed surfaces all as directed & specified make complete all as specified and as directed. Make : Parryware/ Hindware/ Cera/ Somany

Supply and fixing in repairs viterous china wash basin white flat back size 550 x 400 mm including brackets, waste coupling,waste pipes etc complete all as specified and as directed.

Supply and fixing in repair tubular towel rail brass chromium plated 20 mm dia 'D' type 60 cm long between flanges complete all as specified and as directed. Make : Parryware/ Hindware/ Cera/ Somany

Supply and fixing in repair waste coupling 32 mm dia of PTMT (half or full threaded) minium weight 45 gram complete all as specified and as directed. .

Supply and fixing in repairs PVC flexiable pipe (Connecter) 15 mm dia, 600 mm long with check nut and bolt with washer all as specified

Supply and fixing in repairs PVC waste pipe 32/40mm bore for WHB & Sink

Supply and fixing in repairs grating doom 125mm dia with waste hole of PTMT (Min wt 40 gms).

Supply and fixing in repairs pillar tap with capstan heads chromium palted screwed down high pressure with or without letter 'Hot' or 'Cold' with long screwed shanks and flynuts screwed for galvanised iron pipe and fixed complete for 15 mm bore all as specified. Make: Jaquar/ Prayag/ Zolota/ Leader/ Cera

Supply and fixing in repairs Bib taps short/long body cast copper alloy chromium plated with fancy type handle screwed down screwed for iron pipe or for brass ferrule and fixed complete for 15 mm bore all as specified. Make: Jaquar/ Prayag/ Zolota/ Leader/ Cera

Supply and fixing in repair shower rose chromium plated 120 mm with with 10" arm including fixing to steel pipe of 15 mm bore all as specified. Make: Jaquar/ Prayag/ Zolota/ Leader/ Cera

Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 concealed including elbow,tee,fta,mta and all fittings for 16mm dia on walls/ceiling or laying in floors including taking down up or down 15mm bore steel tubing galvanized and PVC pipes and connection including cleaning for re-fixing or removal from site complete all as specified. complete all as specified

Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 concealed including elbow,tee,fta,mta and all fittings 20mm dia on walls/ceiling or laying in floors including cleaning for re-fixing or removal from site complete all as specified.

Supply and fixing three layer Rotational moulded polyethylene water storage tanks of storage 500L (cylindrical vertical with closed top) hoisted and fixed in position incl tank nipple/adaptor wherever required including taking down of old unserviceable tank complete all as specified and directed. Make: Kavery/ Sintex/ Polycon/ Infra

Supply and fixing in repairs 15 mm dia stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for CPVC pipe complete all as specified and as directed. Make: Jaquar/ Prayag/ Zolota/ Leader/ Cera

Supply and fixing 75mm PVC (SWR) floor trap, plain with CP grating including jointing with solvent cement complete all as specified and directed.

Supply and fixing Sink with drainage board made of stainless steel 1mm thick for kitchen with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever cast iron brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. Make: Diamond/ Nirali/ Parrayware.

Supply and fixing PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to floor/walls bore of pipe 75 mm with PVC clamps and saddles including dismantling of cast iron/RCC/PVC drain pipes jointed in cement mortar and taking out from trenches or walls and all as specified and directed.

Supply and fixing PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to floor/walls bore of pipe 110 mm with PVC clamps and saddles including dismantling of cast iron/RCC/PVC drain pipes jointed in cement mortar and taking out from trenches or walls and all as specified and directed.

Supply and fixing PVC (SWR) bends of any radius with access door bore of pipe 75 mm complete all as specified and directed.

Supply and fixing PVC (SWR) bends of any radius with access door bore of pipe 110 mm complete all as specified and directed.

Supply and fixing PVC (SWR) junction single(single T) equal or unequal with access door bore of pipe 75 mm bore

Supply and fixing PVC (SWR) junction single(single T) equal or unequal with access door bore of pipe 110 mm bore

Supply and fixing PVC (SWR) reducers 110 mm bore

Supply and fixing PVC (SWR) vent cowl bore of 110 mm bore

Supply and fixing PVC (SWR) bends any radius of bore 75 mm bore

Supply and fixing PVC (SWR) bends any radius of bore 110 mm bore

Taking down Chowkhat or frames not exceeding 1.5 Sqm each with shutters(Without taking off shutters from the frames).

Taking down Chowkhat or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each(Without taking off shutters from the frames).

Material & labour 2nd class hardwood plain, solid straight chowkhats and frames, wrought, framedrebated on the solid,rounded or chamfered, puttogether with glue pinned at joints, 2nd class HW.

Supply and fixing factory made, 2nd class hardwood 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated

Supply and fixing factory made, 2nd class hardwood 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats and all as specified and directed.

Supply and fixing Factory made PVC choawkats or frames of size 50x 47mm with wall thickness made out of extruded 5 mm rigid PVC foam sheet mitered at corner and jointed with 2 Nos of 150mm long brackets of 15mm x MS square tube the vertical door prattles to be reinforced with 19 x 19 mm MS square tube of 19 gauge EPDM rubber gasket door frame to be fixed to wall using MS screws of 65/100mm size complete as per manufacture’s specification

Supply and fixing Factory mode 30 mm thick PVC paneled door shutter,,made from MS tube of 19 gauge x 19 mm x 19mm for styles and 15mm x for top & bottom rails, covered with heat molded PVC channel of 5mm thick sheet and 30x 50mm wide to from styles and 5mm thick x 75 mm wide PVC sheet for top rail and lock rail on either side and 5mm thick x200mm wide crass PVC sheet as gap insert for top rail and bottom rail paneling of 5mm thick PVC sheet fitted with MS frames welded/sealed to styles and rails with PVC sheet beading either side jointed together

Supply and fixing steel ventilators with top hung shutter including hinges, steel pegs, stay, MS handles etc complete all as specified and directed including taking down of old existing unserviceable ventilators complete all as specified and as directed. .

Supply and fixing Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded including taking down of old existing unserviceable windows complete all as specified and as directed. .

Supply and fixing Butt hinges, medium weight, cold rolled mild steel, and fixed 100 mm long Stainless steel butt hinges extruded complete all as specified and as directed. ..

Supply and fixing 150 mm size Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed. .

Supply and fixing 300 mm size Aluminium alloy fancy type, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and as directed.

Supply and fixing Extruded Aluminium alloy handles, fabricated type, anodised 150mm

Supply and fixing stainless steel wire cloth of 0.36mm dia of wire and average width of aperture 1.40mm with staples or serviceable fillets complete as directed by EIC

Supply and fixing 4mm thick frosted glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane and all as specified and directed.

Supply and fixing sheet glass ordinary quality 3 mm thick, in squares n.exc. 0.50 Sqm in each pane including. Necessary new oil putty or with existing metal beadings complete.

Material and labour for preparation of new wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint in any tint over a coat of pink primer on new surfaces all as specified and directed.

Material and labour for providing two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description, over 10cm in width or girth,not otherwise described and all as specified and directed. Note for item No 52, 53, 63 and 64 :- (a) Paint, shall be of 1st quality manufactured by the standard firms of make as specified. (b) The contractor shall inform the GE, within three weeks of the acceptance of the tender, the brand/names of the manufacturers of paint proposed to be used in the works and submit samples thereof and obtain prior written approval of GE before their use in works. (c) Paints shall be obtained direct from approved manufacturer or from their authorized agents only of respective brands mentioned below and brought to site in sealed containers. The paint so procured shall be of first quality of any approved make as per list of makes specified. i. Berger Paints (Luxol), ii. Jenson & Nicholson (Brolac), iii. Shalimar Paints(Superlac), iv. Goodlass Nerolac (Nerolac), v. Asian Paints(Apcolite) (d) Unless otherwise specified the tints of paint shall be as approved by the GE . (e) The contractor shall when so required by the GE, produce certificate from the manufacturer or their representative to establish that the brands of paints purchased by the contractor from them, satisfy the requirements of the relevant Indian Standards. Tint of paint, will be approved by the GE. (f) The contractor shall submit samples of the paints proposed for the work along with results of tests conducted in approved laboratory as directed by the Engineer-in-Charge for approval.

Material and labour for aluminium drapery rod fancy type outer dia 25mm with powder coated with alumium brackets of weighing 140gms complete all as specified and directed.

Supply and fixing in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

Supply and fixing inrepair Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours; articles n exc 200 cu. cm each of 2nd class hard wood complete all as specified.

Material and labour for 4mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm each panes including hacxking out old broken glass panes exc 1.5sqm description from wooden or steel frame and all as specified and directed.

Material and labour keyed pointed in CM 1:4 for squared rubbel masonry including racking out joints /points in cement mortar and all as specified and directed.

Preparation of plastered old decorated surfaces of walls including cleaning by brooming down scrapping down smoke & moulds efflorescent salts and applying one coat of white wash on wall surfaces all as specified

Material and labour for preparation of old surfaces of wall including scrapping down, smoke soot, efflorescence salts trading oil and greasy spots etc by applying one coat of white wash on ceiling

Material and labour for preparation of old surfaces of wall including complete removal of existing treatment including washing down and cleaning etc. and applying 3mm thick wall putty on walls and applying two coats of distemper oil emulsion over a coat of priming complete all as specified and directed

Material & Labour for preparation of old decorated surfaces of walls including cornices, pilasters etc (Plastered or un plastered surfaces) and applying One Coats of cement base paint complete all as specified and as directed.

Material and labour for preparation of old wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint in any tint on old surfaces all asspecified and directed

Material and labour for preparation of old surfaces of steel and iron work of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint on old surfaces in any tint complete all as specified.

Excavating in post holes in soft/ loose soil (or similar holes) each n exc 0.5 cu m getting out, and removing surplus soil to a distance n exc 50 m and all as specified and as directed

Material and labour Cement Concrete 1:2:4 type B-2 (using 40 mm graded crushed stone agg as in foundation filling or for mass concrete complete all as specified and directed.

Supply and fixing MS Steel work in tubular trusses and poles including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS.1161-1979 grade St.-240 incl welding all as spfd

Material and labour for 0.50mm thick Pre painted Galvalum aluminium zinc coating GI based corrugated steel sheet AZ150 of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall , fixed with self tapping screws as specified.

Material and labour for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Material and labour for mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 250-w quality B all as specified and directed.

Taking down carefully copper point wiring light, fan, switch, socket, fan regulator etc complete, etc and refixing the same in original alighment after tiling work etc all as per site requirement and making the good disturbed surfaces of walls, floors, etc and matching with existing complete specified and directed by Engr-in-Charge. Note:- (i) While during B/R work removing the existing point wiring, if any damage occured to the existing accesories such as PVC conduit , sunction box, Hylam sheet, wires , switch, socket, fan regulator etc to be replaced with new one without any extra cost .

Material and labour for r point wiring complete with 1.5 sqmm single core PVC insulated, unsheathed fire retacable 1100 volts grade, multi stranded with copper conductor drawn through and incl PVC Conduit with accessories in wall/roof/ceiling etc incl MS modular terminal boxes, concealed surface to walls covered with modular plates with cover etc and 1.5 sqmm PVC insulated, unsheathed copper conductor multistranded cable 1100V grade as earth continuity conductor & connecting to common earth dolly all as specified for Make of Cable : Plaza/ Polycab/ Havells Make of Conduit : Supreme/ Diplast/ Avon Plast Note: (a) Switches, sockets outlets, blanking plate, Light fittngs, fans, bells & regulators will be measured and paid for separetely). (b) Connection of wire with switch, socket shall be through copper thumble (lugs) only.

All as per item No. 72 here in before but for One light point/fan/bell point controlled by one switch

All as per item No. 72 here in before but for one switch socket outlet 3 pin 5 Amps on independent board

All as per Sl No 72 above but Wiring with 4 Sqmm copper multistranded unsheathed cable and 4 Sqmm copper cable for earth continuity conductor controlled by one 15A switch socket independently

Supply and Fix modular switch 1 way 6 amp.1 module. Make : Legrand (Model- Arteor), ABB (Cheiron), Schneider (Ulti)

Supply and Fix modular Socket, 6A - 2/3 pin combined 2 module. Make : Legrand (Model- Arteor), ABB (Cheiron), Schneider (Ulti)

Supply and Fix modular switch 1 way 16 amp.1 module. Make : Legrand (Model- Arteor), ABB (Cheiron), Schneider (Ulti)

Supply and Fix modular Socket, 16A - 2/3 pin combined 2 module. Make : Legrand (Model- Arteor), ABB (Cheiron), Schneider (Ulti)

Supply and fixing Call bell push flush type single pole one way 5 Amps

Supply and fixing in replacement Modular stepped type electronic fan regulator flush type 100 Watts ( Make: Legrand / C&S/ ABB/Schneider .

Supply and fixing replacement Bell Ding-Dong AC 230 V AC complete all as specified and directed. ( Make: Anchor/ Indo Asian / Legrand / (C&S)/Havells.

Supply and fixing in replacement of hylem sheet minimum 3mm thick of broken switch boards suitable size including cutting, fixing switch/socket complete all as per site requirement complete all as specified and directedby Engr-in-charge.

Supply and fixing in replacement of GI Sunken box minimum 2mm thick for fixing hylem sheet, switch and socket on wall surface complete all as per site requirement complete all as specified and as directed by Engr-in-charge.

Supply and fixing PVC ceiling rose two to three plate surface and jumbo type all as specified.

Supply and Fixing in replacement indoor decorative extruded aluminium anodised housing /CRCA sheet steel coated housing (suitably coated to improve resistance against corrosion) LED T8 batten type luminaire (LED batten shall be prewired box type) retrofit solution with and including replaceable retrofit cool day white LED tube rod with well designed aluminium heat sink /aluminium housing for excellent heat dissipation; 4feet (appx) size, high efficiency electronic driver, system wattage 20 watt (lumen output not less than 2000 lumen), power factor more than 0.9, with surge protection device minimum 3KV, colour temperature not less than 5700K, LED driver with constant output voltage and current at input voltage of 140 Volt to 285 Volt AC at 50 Hz, CRI more than 80, glarefree, no UV radiation light fitting with wall mounting arrangement and making connections with PVC insulated copper conductor 3 core cable of 0.5 sqmm complete all as specified and directed. Make : Philips CAt part NO.85395000 /Wipro cat part No. LL13-181-650 for rod and WIO921208 or equivalent in Bajaj

Supply and Fixing in replacement indoor decorative extruded aluminium anodised housing /CRCA sheet steel coated housing (suitably coated to improve resistance against corrosion) LED T8 batten type luminaire (LED batten shall be prewired box type) retrofit solution with and including replaceable retrofit cool day white LED tube rod with well designed aluminium heat sink /aluminium housing for excellent heat dissipation; 2feet (appx) size, high efficiency electronic driver, system wattage 10 watt (lumen output not less than 2000 lumen), power factor more than 0.9, with surge protection device minimum 3KV, colour temperature not less than 5700K, LED driver with constant output voltage and current at input voltage of 140 Volt to 285 Volt AC at 50 Hz, CRI more than 80, glarefree, no UV radiation light fitting with wall mounting arrangement and making connections with PVC insulated copper conductor 3 core cable of 0.5 sqmm complete all as specified and directed. Make : Philips/wipro/Bajaj

Notes for item 86 to 87:- (a) The contractor shall submit to Engineer-in-Charge LM-80 and LM-79 report from the NABL approved lab of LED chip used and luminaire respectively while getting sample and material approved. (b) The contractor shall also submit test report from the manufacture to comply with all requirements and specifications given in the contract. (c) The contractor shall submit warranty certificate from manufacturer for minimum 02 year.

Supply and fixing road lighting building security luminaire of 36 watt LED street light High power LED, with unique peanut lens to ensure uniform distribution, higher spacing between poles and maintenance free system with excellent thermal management including prewired and taking down UNSV street light fittings all as specified and directed, Make : Philips Cat No BRP 409 LED CW 036 MR FG S1 PSU GR/Wipro/Bajaj . Notes:- 1. The contractor shall submit to Engr-in-Charge LM-80 and LM-79 report from the NABL approved lab of LED chip used and luminaire respectively. 2 The contractor shall submit warranty certificate from manufacturer for minimum 2 years.

Supply and fixing Sheet metal enclosure with distribution board SPN 240V Volts 4 ways Double door with 200 amp rated bus bar for provn for MCBs/ Isolators, fixed to wall and making all connections all as directed. Make: Indo Asian / Legrand / ABB.

Supply only single pole MCB 6 to 32 Amps, 240 v, 50 Hz AC suitable for ‘C’ curve, 10 KA breaking capacity conforming to IS 8828 of 1996 all as specified (Make/Model : Lexic MCB of MDS Legrand Cat No :408587 to 408595 / Siemens/ Schnieder.

Supply and fixing MCB SPN 40 Amps rating, 'C' series , 10 KA breaking capacity, 240 V, 50 Hz AC supply including making all connections complete all as specified . Note :- Make : Siemens / Legrand / ABB.

Supply, installation, testing and commissioning of factory made LT Meter Panel board wall mounted made out of CRCA sheet of 2mm thick indoor type totally enclosed weather proof, dust vermin proof with front openable, hinged door locking arrangement mounted on MS clamp welded to panel body duly grouted in wall including provn of Acriylic sheet for meter reading, space for refixing of single phase KWH meter 5-60 Amps -10 Nos AC 230Volts seperate compartment with seperate door with MCB SPN with incl lugs, spacer mounting chanels, rubber gasket, locking knobs, PVC shrinkable sleeves, nut bolts, washers etc, each suitable compartment of every meter and control MCB SPN circuit and epoxy powder coated spray paint with primer, CPRI type tested complete all as per site requirement, specified and directed by Engr-in-charge including the following accessories:- (a) MCCB 100 amps TP pole ,415 Volts, 25 KA fixed thermal and magnetic - 01 No ( as incomer ) (b) R-Y-B phase LED indicating lamp-03 Nos with multifunction meter (c) Copper control wiring in with fuse of suitable size, 150A rated duly insulated common to copper busbar from MCCB and branch busbar /copper cabel rated 63Amp for meter compartment with suitable insulators , lugs ,colour coding . (d) MCB 40 amps SPN, 230 Volts, 16 KA - 10 Nos(outgoing) (e) MCB SPN 16Amps, 230Volts, 10KA-01 No ( Spare/ Stair case outgoing) Note: Re-fixing existing electric meter -10 Nos and to be insured properly matching the qtr Nos before fixing the electric meter.

Material and labour for sub main wiring with PVC insulated unsheathed FRLS cable 1100 volts grade multi stranded copper conductor cable 2 runs of 6 sqmm drawn through in and incl suitable size PVC conduit and all accessories fixed to wall/floors along with 6 sqmm PVC insulated unsheathed copper conductor multi stranded cable 1100V grade as earth continuity conductor and connected to common earth dolly including taking down existing sub main wiring of any size. Note: (a) 2 runs of 6 sqmm cable along with one run of 6 sqmm cable for earth conductor shall be measured as one length (b) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/copper thimbles. Make:- Havells/ Polycab/ Plaza.

Material and labour for Earthing with Galvanised Earth Plate Electrode 600x600x 6mm thick burried directly in Ground (Earth Pit not less than 2.25 Metre below Ground Level) with Top edge of the Plate not less than 1.50 Metre below Ground Level, connected with Galvanised Earth Strip of size 25x6mm by means of Bolts, Nuts, Check Nuts and Washers of GI or Steel and connected Earthing Testing Point/Bus-bar including GI 40mm bore (dia) light grade Protection Pipe, Earth Plate surrounded by a packed thickness of Char Coal or Coke Dust mixed with Common Salt Magnesium Sulphate (1 : 1: 0.5) in alternate layers of not exc 150mm thick, PCC Pit in Cement Concrete 1:3:6 (20mm graded stone aggregate) and Pre-cast RCC Cover Slab of size 350x350x50 mm in Cement Concrete 1:2:4 (20mm graded stone aggregate), reinforced with 10mm dia TMT Bars @ 100mm Centre to Centre in both ways, GI Wire Mesh, Funnel with GI Watering Pipe 20mm bore (dia) medium grade including necessary Excavation in Soft/Loose Soil, Returning, Filling in and Removal of surplus Spoil upto a distance of 50.00 Metre and all as shown in Electrical Plate No. 3 of MES Schedule Part-I and Testing on Completion including taking down old unserviceable one, complete all as per specified and as directed.

Taking down ceiling fan ,sealing cable end ,dismantling the fan blade and kept in safe custody all as per specified .

Material and labour for Hanging/Fixing ceiling fan after servicing and connecting up including provision of cable from ceiling rose or connector to fan all as specified ,and any addn/alteration /threading if required to down rod shall be done by contractor with out any extra cost.

Material and labour painting of ceiling fan complete, insitu with synthetic enamel paint by spraying as per exist color match including filling cavities with filler,one coat after cleaning all dust all as specified.

Material and labour for dismantling the defective ceiling fan motor by taking out burnt copper winding ,rewinding with super enamelled copper wire of existing gauge and weight including replacement of all insulation material and other petty items required for making motor functional all as specified and directed. Note: old burnt U/s copper scrap retrived from old fan @ 0.10 Kg/Each fan is given to contractor as credit.

LAKSHMI CONSTRUCTIONS

chowdeshwariconstructionco

KUZHIKKAL ENTERPRISES

PRACHANIVA CONSTRUCTIONS

SRI LAKSHMI VENKATESHWARA ENTERPRISES

SAI MAX INFRAPROJECTS

SREE BUILDERS

Maruthi constructions

TECKXPERT ENTERPRISES