SPECIAL REPAIRS TO BUILDING No 2 UTILITY IN ELSEC UNDER GE I RND RCI, HYDERABAD

Amount

Taking down cement plastering of any description from any height complete including disposal of debris to a distance all as directed by Engineer in Charge.

M&L, 15mm thick rendering in cement mortar 1:4, on brick/concrete surface finished even and smooth without using extra cement mixed with integral water proofing compound as per manufacturer's instructions complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately.

M&L, 15mm thick rendering in cement mortar 1:6, on brick/ concrete, in any height, finished even and smooth without using extra cement complete all as specified and directed.

M&L, 5mm thick rendering in cement mortar 1:3, on ceilings of concrete surfaces, in any height, finished even and smooth without using extra cement including taking down cement plaster complete all as specified and directed.

Supply only integral water proofing compound (ISI marked) complete all as specified and directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing the rubbish off the premises complete all as directed.

M&L, coloured double charged vitrified tiles in floors of size 600 x 600 x 9 to 10mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including screed bed or bedding layer 15mm thick in CM 1:6 laying in floors complete all as specified and as directed complete all as specified and as directed. Note: Shade and design/pattern of tiles shall be as directed by GE.

M&L, 9 to 10mm thick double charged coloured vitrified tiles in skirting of size 600 x 100mm, set and jointed in neat cement slurry and pointed in coloured cement to match shade of tile over and including 10mm thick backing coat in CM 1:3 complete all as specified and as directed.

M&L, 7 to 8mm thick 300 x 300mm coloured, joint free Non skid ceramic tiles, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including screed bed or bedding layer 15mm thick in CM 1:6 laying in floors complete all as specified and as directed. Note: Design of tiles shall be as approved by GE

M&L, coloured glazed ceramic tiles of size 450 x 300mm, 6 to 7mm thick in dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 10mm thick backing coat in CM 1:3 complete all as specified and as directed. Note: Design of tiles shall be as approved by GE

M&L, 18 to 20mm thick machine cut coloured granite, factory polished, in flooring, bedded and jointed with grey cement slurry over screed bed or bedding layer 15mm thick in CM 1:4 and pointed with white cement with admixture of pigment to match the shade of granite stone complete all as specified and as directed

M&L, 12 to 18mm thick machine cut coloured granite, factory polished, in skirting/dado, laid over and including cement screed bed 10mm thick in CM 1:3 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone complete all as specified and as directed

M&L, 20-25mm thick machine cut kota stone slab in flooring laid over and including 20mm thick cement screed in CM 1:6, jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L, 75mm thick PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in plinth protection, laid in bays, bay area not exceeding 2Sqm, each finishing the surface even and smooth including necessary formwork and filling the joints with mastic filling comprising 1 part of heated bitumen and 3 parts of sand (all by weight complete all as specified and directed.

Demolition of brickwork or stone masonry including all quoins, arches, pillars, etc., built in cement mortar complete all as directed by Engineer-in-charge.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete including disposal of debris to a distance all as directed by Engineer in Charge.

M&L, brickwork with sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:4 complete all as specified and directed.

M&L, PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.

M&L, PCC 1:3:6, type C-1 using 20mm graded stone aggregate as in drain, surface channels and benching including necessary formwork complete all as specified and directed.

Extra for forming fair finished drain or channel of 30cm inner girth in cement concrete, using extra cement including forms moulds mitred / stopped ends etc., complete all as specified and as directed.

M&L, PCC 1:2:4, type B-0 using 12.5mm graded stone aggregate as in roof curbs, coping and platform to water tanks and the like including necessary formwork, weathering, slightly rounded or chamfered angles and throating and other similar works complete all as specified and directed.

M&L, 100mm thick PCC 1:4:8 type D-2 in sub base using 40mm graded stone aggregate finishing the surface even and rough including necessary formwork complete all as specified and directed.

M&L, 60mm thick, M-35 Grade, machine pressed precast concrete interlocking coloured paver block with grey cement and pigments any shape and size conforming to IS 15658-2006 laid over 50mm thick crushed stone sand filling including watering and consolidation complete all as specified and directed.

Taking down chowkhat or frames (without taking off shutters from the frames) not exceeding 1.5Sqm complete all as directed.

Taking down chowkhat or frames (without taking off shutters from the frames) exceeding 1.5Sqm but not exceeding 4Sqm each complete all as directed.

Taking down shutters of any description from the frames exceeding 1Sqm but not exceeding 2Sqm complete all as directed.

S&F 1.25mm thick Pressed steel frames for doors of size 105mm x 60mm with one or more rebates including necessary fixing lugs. hinges, lock strike plate, etc., complete, as specified

S&F 1.25mm thick Pressed steel frames for doors of size 125mm x 60mm with one or more rebates including necessary fixing lugs. hinges, lock strike plate, etc., complete, as specified

S&F, 30mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides and one face is covered with decorative face veneer with lipping complete all as specified and directed.

S&F, 2mm thick mica lamination sheeting, decorative type on flush shutter fixed with adhesive including necessary lipping/frame to match the surface complete all as specified and directed.

S&F, 30mm thick second class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauze, etc., complete all as specified and directed. Note: Sizes of members of shutters as specified in SSR Part I,

S&F, in opening solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified and as directed.

S&F, Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of mild steel tubes for top & bottom rails, mild steel frames shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the mild steel frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement all as specified and directed.

S&F, 300mm long aluminium anodized sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

S&F, 100mm size stainless steel butt hinges, medium weight complete all as specified and as directed.

S&F, 150mm size, extruded aluminium anodized handles, fabricated type, complete all as specified and as directed.

S&F, 150mm long (overall length of cover plate) floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor complete all as specified and as directed.

S&F, aluminium (Die cast) body door closer hydraulically regulated, designation No, 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80Kg complete all as specified and as directed.

S&F, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or stainless wire staples complete all as specified and as directed.

S&F in repairs, Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden or metal frames, or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and directed.

S&F, 5.5mm thick sheet glass reflective type, plain and glazing with oil putty in square not exceeding 0.5sqm in each pane complete all as specified and as directed.

S&F, 5.5mm thick figured glass, pin head type and glazing with oil putty in square not exceeding 0.5sqm in each pane complete all as specified and as directed.

Taking down rain water pipes (any size or pattern) fixed to walls, including all fittings, heads, shoes, bends, swan necks, etc., (measured overall as fixed along the centre line over fittings and accessories), complete all as directed.

S&F, 110mm dia PVC(SWR) pipes, ISI marked, single socketed in any length with rubber ring joints fixed to walls with PVC clamps as rain water pipe complete all as specified and as directed.

S&F, 110mm bore PVC(SWR) junction single, (Single T) equal or unequal complete all as specified and as directed.

S&F, 110mm bore PVC(SWR) bends any radius with access door complete all as specified and as directed.

S&F in repairs, 1000litres capacity triple layered rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

Disconnecting existing tanks of capacity exceeding 1000 litres and not exceeding 2000 litres setting aside (or lowering if required) for repairs, cleaning and removing all scale and dirt etc., from tanks and from mouths of circulating pipes and hoisting as required, reconnecting and refixing in position complete all as directed.

S&F in repairs, 25mm dia Gun metal, globe or gate valves with iron wheel head, ISI marked screwed both ends for iron/GI pipe and fixed complete all as specified and as directed.

S&F in repairs, 15mm bore angular stop valve, cast copper alloy, chromium plated fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron/GI pipe or for union complete all as specified and directed. Make: Jaquar model No KUP-CHR-35053PM or equivalent in Parryware or Hindware

S&F in repairs, 15mm bore Pillar taps, cast copper alloy, fancy type, chromium plated, screwed down high pressure with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. Make: Jaquar model No KUP-CHR-35001PM or equivalent in Parryware or Hindware as approved by GE

S&F in repairs, 15mm bore bib taps with wall flange, cast copper alloy with crutch or butterfly handle, fancy type, chromium plated, screwed down, screwed for iron/GI pipe or for brass ferrule complete all as specified and directed. Make: Jaquar model No KUP-CHR-35037PM or equivalent in Parryware or Hindware as approved by GE

S&F in repairs, 25mm bore premium PTMT Ball valves, high pressure, with polythene float and fly nut complete, screwed for iron/GI pipe or brass ferrule complete all as specified and directed.

S&F in repairs chromium plated urinal spreader complete all as specified and as directed..

S&F in repairs, PVC connections 15mm size with PTMT nuts of length 600mm, complete all as specified and directed.

S&F in repairs, 10 litres, PVC valve less, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed. Make: Jaquar model No WHC-WHT-184NT or equivalent in Parryware or Hindware as approved by GE

S&F in repairs, vitreous china flat back Urinal of size 475 x 315 x 715mm, white, including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing grating and union for discharge pipe etc., waste coupling of PTMT (half or full threaded) for 32mm bore dia of discharge pipe (minimum weight shall be 45gms) complete all as specified and directed. Make: Jaquar model No URS-WHT-13259 or equivalent in Parryware or Hindware as approved by GE.

S&F in repairs, vitreous china wash hand basin white 595x400x195mm size including cutting for and pinning in ends of brackets including brackets, PVC waste pipe and coupling of suitable size complete all as directed. Make: Jaquar model No FNS-WHT-40701 or equivalent in Parryware or Hindware as approved by GE

S&F in repairs, vitreous china coupled wash down water closet (pedestal pattern) with cistern, UF soft close seat cover, hinges, fixing accessories and accessories set, white including connecting to trap and to flushing pipe complete including fixing to floor with bolts complete all as specified and directed. Make: Jaquar model No OPS-WHT-15751S250UF + OPS-WHT-15201 or equivalent in Parryware or Hindware as approved by GE

S&F in repairs, vitreous china squatting pan, ‘Orissa’ pattern of size 630 x 450mm, white, with integral foot rests, including connection to trap, and to flushing pipe, antisyphonage pipe, etc., complete including provision of cement concrete bedding in 1:5:10 and making good to floor complete all as specified and directed.

S&F in repairs, mild steel chromium plated towel rail, 'D' shaped, 20mm dia, 600mm long, premium quality complete all as directed.

S&F in repairs, cast iron floor trap, 100mm dia outlet, with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate complete all as specified and as directed.

S&F in repairs, 15mm bore steel water tubing, medium grade, ISI marked, galvanized, including all fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc., laid in trenches or fixed to walls and ceilings or laid in floors complete all as specified and directed.

All as per item No 65 above but 20mm bore of pipe.

All as per item No 65 above but 25mm bore of pipe.

Cutting chases not exceeding 10cm girth to brick walls for concealed water tubing and making good cutting in cement mortar 1:3 complete all as directed.

M&L, preparation of old plastered surfaces of walls including cornices, pilasters etc., and applying one coat of distemper oil emulsion complete all as specified and directed.

All as per item No 69 above but for ceiling surfaces.

M&L, preparation of old decorated ceiling surfaces and applying one coat of white wash complete all as specified and directed.

Complete removal of existing treatment from external surfaces of walls thoroughly by machine grinding, scrapping, rubbing/wire brushing, sand papered and watering with jet etc., and applying two coats of water proof external wall care putty and making surface even and smooth to receive external emulsion and applying two coats of weather proof anti algal exterior acrylic emulsion paint (100% acrylic), premium quality, over a coat of primer all as per manufacturer's instruction complete all as specified and as directed.

M&L, preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L, preparation of old painted steel surfaces of any description, over 10cm in width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L, preparation of new wooden surfaces of any description, not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L, preparation of new steel surfaces of any description, over 10cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

Dismantling of sheets in roof coverings (corrugated, semi corrugated etc.,) any material including ridges complete all as directed.

S&F, Roof trusses (framed), trussed, purlins, crane gantries rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc., conforming to Fe 410W (Grade E-250) quality 'A' complete all as specified and directed.

S&F, Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet / trapezoidal steel sheet 0.50mm base metal thickness of any colour having tensile strength of 550MPa as in roof covering/cladding to wall, fixed with self tapping screws and EPDM washers complete all as specified and directed.

S&F, Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550MPa as in ridges, hips, valley gutters, drip and straight flashings, fixed with self tapping screws and EPDM washers complete all as specified and directed.

S&F, l.25mm thick, class 3 galvanized mild steel sheet in eaves gutters, half round moulding with rounded edges of 300mm dia approximately or as required at site complete all as specified.

S&F in repairs, Venetian blinds of approved make, vertical type using 100mm wide fabric blinds of approved colour/ shade and pattern including operating arrangement such as chord/ thread, counter weight, connecting chain etc., and necessary fittings complete all as specified and directed.

S&F in repairs, metallic fibre acoustical suspended ceiling system with Mina Tuff (Micro look) edge tiles with silhouette exposed grid. The tiles hold have humidity resistance (RH) of 99%, NRC upto 0.6, light reflectance 88%, Thermal conductivity K=0.052-0.057 w/m K, colour white, fire performance class-I (BS476 part 6 & 7) in module size of 600 x 600 x16mm with bio block coating on the face of the tile, impact resistant and suitable for green building application, with recycled content of 63%. The tile shall be laid on silhouette profile grid system with 15mm white/black colour and with a web height of 38mm and load carrying capacity of minimum 11.68Kgs/Sqm Silhouette, main runner & cross tees to have mitred ends & "Birds mouth" notches to provided mitred cruciform junction. Make : Armstrong, Saint Gobain

S&F, powder coated aluminium frame for doors, windows, ventilators or partitions with one or more rebates including joining cleat for fixing etc., fabricated complete to receive sheet glass and prelaminated board complete all as specified and as directed.

S&F, powder coated aluminium door shutters with aluminium section weighing not less than 0.55Kg/m including necessary joining cleats glazing clips, anodized aluminum snap beading, screws etc., complete all as specified and as directed.

S&F, 5mm thick Tinted coloured glass ordinary quality exceeding 0.50Sqm in each pane complete all as specified and directed.

S&F, 100mm size Butt hinge, extruded anodized aluminium alloy with galvanized mild steel hinge pin, type C-21 complete all as specified and as directed.

S&F, aluminium door Lock seven lever vertical type brass body, 100mm long with duplicate key complete all as specified and directed. Make: Godrej, Link, Harrison

S&F, standard EPDM rubber beading for fixing of glass in partitions or doors or windows complete all as specified and directed.

S&F, aluminium Deco grill of design DG-202 complete all as directed.

Taking down copper/aluminium point wiring from surface/concealed conduit for light, fan, socket or power complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc., removing materials from site and making good disturbed surfaces of walls, floors, etc., to match with the existing complete all as directed.

M&L, Point wiring complete with FRLS PVC insulated unsheathed cable 1100V grade conforming to IS-694, 1.5 Sqmm (nominal area) multistranded with copper conductor drawn through and including non metallic rigid PVC conduit, medium grade, of minimum 20mm dia (ISI marked) and conduit accessories concealed in walls/floors/ceilings/roofs etc., with modular metal flush boxes made out of 1.6mm mild steel sheet with modular plate and frame for mounting of switches, socket outlets, regulators etc., complete including provision of FRLS PVC insulated unsheathed 1.5Sqmm solid copper conductor as earth continuity conductor and connecting to common earth dolly complete all as specified and directed for the following:- Note: Quoted rate shall be deemed to include cost of Modular flush boxes, cover plate and frame.

One light/fan point controlled by one, one way switch, 5/6 Amps

One socket outlet, 3 pin, 5/6Amps, controlled by one way switch on same board with other switches.

One socket outlet, 3 pin, 5/6Amps, on independent board controlled by one way switch.

All as per item No. 92 above but with 2.5Sqmm FRLS cable for 5pin 15Amps socket outlet on independent board and 2.5Sqmm FRLS cable for the earth continuity conductor

All as per item No. 92 above but with 4Sqmm FRLS cable for 5pin 15Amps socket outlet on independent board and 4Sqmm FRLS cable for the earth continuity conductor

S&F, Modular Switch 1 way 6Amps, 1 Module, 240V, ISI Marked complete all as specified and directed

S&F, Modular Switch 1 way 16Amps, 1 Module, 240V, ISI Marked complete all as specified and directed.

S&F, Modular Socket, 6Amps - 2/3 pin combined, 2 Module, ISI Marked complete all as specified and directed.

S&F, Modular Socket, 6/16Amps - 2/3 pin combined, 2 Module, ISI Marked complete all as specified and directed.

S&F, Ceiling rose, surface type Bakelite, three terminal 65x50mm, ISI marked complete all as specified and directed.

S&F, electronic fan regulator 120watt, 2 module 240V 50Hz complete all as specified.

S&F, Telephone socket, 1 module including modular flush box with plate and frame complete all as specified.

S&F, 15watt LED surface mounting luminaire suitable for wall/ceiling surfaces with CRCA powder coated housing with high transmittance polystyrene opal diffuser, IP20 IK03 and high efficiency long life LEDs as light source, powdered by electronic driver complete with all accessories all as specified. Make: Havells Cat No PLUTOSURFACE1X1PLS15WLED 840S or techno commercially equivalent of Phillips / Wipro

S&F, 34Watt LED flat panel for recess mounting luminaire CRCA powder coated housing suitable for Armstrong/grid ceiling with high transmittance polystyrene opal diffuser, IP20 and high efficiency long life LEDs as light source, powered by independent isolated electronic driver complete with all accessories complete all as specified. Make: Havells Cat No PLUTONEO2X2PLR34WLED840S or techno commercially equivalent of Phillips / Wipro

S&F, universal batten for fixing T5/T8 LED tube rods including polycarbonate housing bright LED polycarbonate tube light with very high efficacy suited for installation in T8 fitting with G13 lamp holders complete all as specified. Make: Havells Cat No REGALBATTENT8UPTO1X22WSSB SWH and PHOTONULTRAE2.01213T8SSTL20WLED865 SPC or techno commercially equivalent of Phillips / Wipro

S&F, universal batten for fixing T5/T8 LED tube rods including 2 No polycarbonate housing bright LED polycarbonate tube light with very high efficacy suited for installation in T8 fitting with G13 lamp holders complete all as specified. Make: Havells Cat No REGALBATTENT8UPTO 2X22WSSB SWH and PHOTONULTRAE2.01213T8SSTL20WLED865 SPC or techno commercially equivalent of Phillips / Wipro

S&F, suspension mounting 36W LED luminaire with primary suspension system including main cable and jointing kit complete with all accessories including driver pre-wired complete all as specified. Make: Havells Cat No DESTELLO50LP/S36WLED857S PMMAWH with main cable and suitable jointing kit or techno commercially equivalent of Phillips / Wipro.

S&F repairs, CRCA sheet metal enclosure with metal clad plug and socket single phase with a two pin and earth plug & socket suitable for surface/flush mounting, 240V, 20Amp capacity controlled by and including one No 20Amp MCB SP 10KA complete all as specified and directed.

S&F in repairs, CRCA sheet metal enclosure with metal clad plug and socket three phase with a five pin and earth plug & socket suitable for surface/flush mounting, 415V, 63Amp capacity controlled by and including one No 63Amp MCB TPN 10KA complete all as specified and directed. Make for item No 105 & 106: Legrand/Siemens / L&T / IndoAsian / C&S / Schneider

S&F in repairs, factory made sheet metal enclosure distribution board (MCB DB) SPN 12Way, with 100amps rated copper bus bar, neutral link and earth bar, metal door, powder coated, suitable for use on 240V, 50Hz supply, IP 43 IK 09 protection, MCBs used as out going, making good disturbed surfaces to match with existing complete all as specified and directed.

S&F in repairs, factory made sheet metal enclosure distribution board (MCB DB) SPN 8Way, with 100amps rated copper bus bar, neutral link and earth bar, metal door, powder coated, suitable for use on 240V, 50Hz supply, IP 43 IK 09 protection, MCBs used as out going, making good disturbed surfaces to match with existing complete all as specified and directed.

S&F in repairs, factory made sheet metal enclosure distribution board (MCCB DB) TPN 12Way, with 250Amps rated copper bus bar, neutral links and earth bar, double door vertical type, powder coated, suitable for use on 415V, 50Hz supply, MCCB as incomer and MCBs as outgoing IP 43 IK 09 protection, making good disturbed surfaces to match with existing complete all as specified and directed.

S&F in repairs, factory made sheet metal enclosure distribution board (MCCB DB) TPN 8Way, with 250Amps rated copper bus bar, neutral links and earth bar, double door vertical type, powder coated, suitable for use on 415V, 50Hz supply, MCCB as incomer and MCBs as outgoing IP 43 IK 09 protection, making good disturbed surfaces to match with existing complete all as specified and directed. Make for item No 107 to 110: Legrand/Siemens / L&T / IndoAsian / C&S / Schneider as approved by GE

S&F, 4pole 200Amp MCCB with adjustable thermal and magnetic settings, 50Hz, 25KA rupturing capacity at 415volt, conform to IEC -60947-II/ IS-13947-II complete all as specified. Make: Legrand CAT No 4202 18 or equivalent in Siemens / L&T /C&S /Schneider/IndoAsian(Optipro)

S&F, 4pole 100Amp MCCB with adjustable thermal and magnetic settings, 50Hz, 16KA rupturing capacity at 415volt, conform to IEC -60947-II/ IS-13947-II complete all as specified. Make: Legrand CAT No 4200 15 or equivalent in Siemens / L&T /C&S /Schneider/IndoAsian(Optipro)

S&F, MCB, SP, 6 to 32Amps, 10KA, 240volts, ISI marked complete all as specified and directed. Make: Legrand Cat No 4085 87 to 4085 95 or equivalent in Siemens / C&S /Schneider / IndoAsian(Optipro) as approved by GE

S&F, MCB SPN, 40 to 63Amps, 240volts, 10KA, ISI marked complete all as specified and directed. Make: Legrand Cat No 4086 18 to 4086 20 or equivalent in Siemens /C&S /Schneider / IndoAsian(Optipro) as approved by GE

M&L, Sub main wiring with 2 single core 6Sqmm 1100 Volts grade, FRLS PVC insulated, unsheathed cable, copper conductor, multistranded drawn through and including rigid PVC conduit, medium grade of minimum dia 25mm along with accessories concealed in walls/floors and fixed on concrete surfaces etc, including provision of FRLS PVC insulated 6sqmm copper conductor as earth continuity conductor and connecting to common earth dolly, taking down old wiring and making good disturbed surfaces to match with existing complete all as specified and directed. Note: Two runs of cable, one run of earth continuity conductor and one run of PVC conduit shall be measured as unit length.

M&L, Earthing complete with galvanized steel earth plate electrode of size 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below the normal ground level) with top edge of plate not less than 1.5m below normal ground level connected to GI wire 4mm dia as earth lead by means of bolts, nuts, washers and check nuts made out of galvanized iron or steel all as shown on Electrical Plate No. 3 of SSR Part-I including testing on completion, taking down old earthing complete all as specified and directed.

Note: The unit rate shall also include for earth work in any type of soil, PCC (1:3:6) type C1 chamber, RCC 1:2:4 type B-1 using 20mm graded stone aggregate, 50mm thick cover slab reinforced with 6 Nos of 8mm dia TMT bars both ways, funnel with watering pipe 20mm dia medium grade, GI protection pipe medium grade 15mm dia and wire mesh complete in addition to item No. 1(a) to (e) of preamble (Notes) under sub-heading earthing, specified on Sl. Page No. 422 of SSR Part-II.

SHAH ENTERPRISES

Anjana corporation

V.H.Constructions