HPPTCL/CONTRACTS/TENDERS/ GMCD/ 2024/ 013

Amount

Excavation in Foundations,in all kind of soil and rock , Trenches, roads etc, in Earth Work, in all lifts stacking, the excavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked soil in 15 cm layers, when required into Plinths sides of Foundations etc.consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth within all leads and lifts.as per the directions of Engineer in charge.( Hard rock included)

Providing and Laying 1: 3: 6 (1 Cement: : 3Sand : 6 Graded Stone Aggregate 40 mm nominal size ) and Curing complete excluding Cost of Form Work in Foundation and Plinth

Providing and Laying 1: 4: 8 (1 Cement: : 4Sand : 8 Graded Stone Aggregate 25mm nominal size ) and Curing complete excluding Cost of Form Work in Foundation and Plinth in retaining walls and breast walls etc.

Providing and Laying reinforced Concrete Cement M25 (Design Mix with Graded Stone Aggregate 20 mm nominal size) and Curing complete excluding Cost of Form Work and Reinforcement for Reinforced Cement Concrete Work including admixtures/additives and as per directions of EIC in foundations, footing bases, columns, pillars, equipments foundations, roads etc including erection of foundation bolts wherever required complete in all respects as per the directions of the Engineer-in-charge.

Providing and Laying reinforced Concrete Cement M20 (Design Mix with Graded Stone Aggregate 20 mm nominal size) and Curing complete excluding Cost of Form Work and Reinforcement for Reinforced Cement Concrete Work including admixtures/additives in cable trenches, equipments foundations including erection of foundation bolts wherever required as per the directions of the Engineer -in- charge.

Providing form work with steel plates 3.15 mm thick welded with angle iorn in frame 30x30x5 mm, so as to give a fair finish including centering ,shuttering ,strutting & propping etc. with wooden battens & ballies in all heights and removal of the same.for insite-reinforced concrete & plain concrete work in retaining walls & substructure part of substation components.

Providing & Laying Damp Proof Course 50 mm thick with Cement Concrete , 1: 2: 4 (1 Cement: 2 Sand: 4 Stone Aggregate 12.5 mm nominal size) and Curing complete including applying a coat of hot bitumen ( 80/ 100 or Equivalent) using 1.70 Kg/ sqm on DPC after cleaning the surface.

Providing and Laying Cement Concrete , 1: 2: 4 (1 Cement: 2 Sand: 4 Sand Stone Aggregate 20 mm nominal size) and Curing complete excluding Cost of Form Work in Foundation and Plinth & coping etc.

Providing and Laying 1: 5: 10 (1 Cement: : 5Sand : 10 Graded Stone Aggregate 40mm nominal size ) and Curing complete excluding Cost of Form Work in Foundation and Plinth

Providing Mild / Tor Steel Reinforcement for R. C. C. Work including Bending, Binding and Placing in position complete for all heights. ( Tata , RINL , SAIL)

Providing and laying Brick Work using Common Burnt Clay Bricks in:

Foundation and plinth

Super Structure above Plinth level upto all heights in Cement Mortar 1: 4 (1 Cement: 4 Sand) First Class Bricks

Half Brick Masonry above plinth level upto all heights including providing and laying 2 No. 6mm dia MS Bars at every 4th course of masonry. in C M 1:4 (1 Cement :4 sand) up to all heights and as directed by EIC.

12 mm cement plaster in single coat on rough / fair side of brick /concrete /stone wall for interior plastering up to all heights including arises internal rounded angles chamfers and/or rounded angles not exceeding 80 mm in girth & finished even & smooth (in cement mortar 1 : 4 , 1 cement: 4 sand )

15 mm cement plaster in single coat on rough / fair side of brick /concrete /stone wall for interior plastering up to all heights including arises internal rounded angles chamfers and/or rounded angles not exceeding 80 mm in girth & finished even & smooth (in cement mortar 1 : 4 , 1 cement: 4 sand )

20 mm cement plaster in two coats (8mm + 12mm) on rough / fair side of brick /concrete /stone wall for exterior plastering upto all heights including arise external rounded angles chamfers and/or rounded angles not exceeding 80 mm in girth & finished even & smooth (in cement mortar 1 :4 , 1 cement: 4 sand for 8mm outer layer and 12mm base as 1:4 as above )

6 mm cement plaster to ceiling in cement mortar 1:3 (1 cement :3 sand).

Supplying and Fixing Rolling Shutters of approved Make made of 80 mm x 1.25 mm M. S. Laths interlocked together through their entire length and joined together at the end by End Locks mounted on specially designed Pipe Shaft, with Brackets, Side Guides and arrangements for inside and outside locking with motor operated arrangement but including the cost of the top cover and spring.

Stone soling/ pitching/ filling under floors and for road work / behind retaining wallls as per the directions of EIC

P/L Sand filling under floors as per the directions of EIC including watering and compaction complete.

Providing and laying granite stone in flooring 20 mm (average) thickness base of cement mortar 1:4 (1 cement :4 Sand) laid over and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. 20 mm thick

Rubbing and polishing of Kota stone slab 20 mm average thick .

Providing and laying antiskid vitrified tiles 5.5mm thick in flooring (600x600mm) size except for WC for which size is 300 mm x 300 mm to be used and treads of steps laid on a bed of 20 mm thick cement mortar 1:4 (1Cement: 4 sand) (Double Charged finished with flush pointing with pigment to match the floor finish). ( Kazaria/ Nitco /Somany make )

Providing and laying vitrified tiles 5.5 mm thick ( Double charged) in the walls of kitchen , pantry , W.C ( Kazaria/ Nitco/ Somany make )

Distempering two coats with oil bond washable distemper of approved brand & manufacture of required shade on undecorated wall surfaces to give an even shade over & including a priming coat with distemper primer of approved brand & manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth priming coat with distemper primer.( Asian , Nerolac)

Finishing Wall with Water Proofing Cement Paint of approved Brand and Manufacture and of required Shade on Undecorated Wall Surfaces (Two coats) to give an even Shade after thoroughly Brushing the surface to remove all Dirt, Loose or Softened Paint. ( Asian , Nerolac)

Painting two coats (excluding priming coat ) on new steel & other metal surfaces with enamel paint brushing to give an even shade i/c cleaning the surfaces of all dirt, dust & other foreign matter with enamel paint & other than white.

Providing under layer for plinth protection of 75 mm thick (unconsolidated ) bed dry brick/ stone aggregate 40mm nominal size well rammed and consolidated and ground with fine sand including preparation of ground.

Providing plinth protection 50 mm thick in cement concrete 1:2:4 (1 cement: 2 sand : 4 graded stone aggregate of 20 mm nominal size)

Providing false ceiling as per IS specification in control room and as per the directions of EIC

Providing and fixing factory made uPVC white colour casement/ Casement cum fixed glazed door comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealent shall be paid separately).

For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm).( M/S Veka , M/S Duroplast , M/S Fenesta)

Casement door with top hung ventilator with 3D and S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ±. 0.2 mm and single glazing bead / double glazing bead of appropriate dimension.(Area of door 2sqm to 5 sqm). ( M/S Veka , M/S Duroplast , M/S Fenesta)

Providing and fixing factory made uPVC white colour fixed glazed windows/ ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), , uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately).

For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.)( M/S Veka , M/S Duroplast , M/S Fenesta)

Providing and Fixing in wall lining medium density Fibre board/ UPVC Panel Sheet IS 14587: 1998 marked prelaminted one side decorative lamination and other side balancing lamination with necessary fixing arrangement with necessary Fixing arrangement and screws etc. complete . ( M/S Veka , M/S Duroplast , M/S Fenesta)

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately)

Two track two panels sliding window made of (small series) frame 52 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm)

Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm).( M/S Veka , M/S Duroplast , M/S Fenesta)

Providing & fixing glazing in aluminum doors, windows , ventilators, shutters and partitions etc. with PVC/ Neoprene gaskets etc. complete as per the architectural drawings and the directions of the Engineer -in -charge ( Cost of Aluminum snap beading shall be paid in basic item )

Glazing with glass pans of 5.50 mm thickness (weight not less than 13.75 Kg / Sqm.) Toughened glass for kitchen, toilets etc.

Glazing with glass pans of 5.50 mm thickness (weight not less than 13.75 Kg / Sqm.) double Toughened glass for all rooms except kitchen, toilets etc.

Steel work welded in built up sections, single sections, NG rails, ladders, beam joists, channels including cutting, hoisting, fixing in position and applying a priming coat of red lead paint. (Tata , SAIL)

P/L Crushed stone aggregate of 25 mm size on gratings of Transformer Foundations as per specifications.

P/L Bitumen Joint Sealant in expansion and contraction joints of Concrete roads as per the directions of Engineer in charge .

P/L 25 mm thick Bitumen Impregnated fiber board for expansion joints as per the directions of EIC

ANTIWEED TREATMNET

Providing and Supplying all Labour, Material, Equipments etc. Excavation, Mixing / Injecting Chemicals to achieve the guaranteed effectiveness of Treatment at least upto three years, Rolling, Dressing, Compacting the Excavated Earth within Sub Station Area excluding cement concrete as per the directions of EIC

Providing and laying cement concrete 1:5:10 (1 cement: 5 sand: 10 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of form work in foundation and plinth with the layer of cement slurry 1:6

Site surfacing

Providing, Supplying and laying three layers each of 50 mm thick layerwise of crushed stones having nominal size 20 mm over CC 1:5:10 including compaction as per Specifications.

STORM DRAINAGE SYSTEM

Providing laying (to level or slopes) and jointing reinforced concrete heavy duty non - pressure pipes IS class NP 2 of the following internal diaMtrs. with flush joints including testing of joints complete.

Providing laying (to level or slopes) and jointing reinforced concrete heavy duty non - pressure pipes IS class NP 3 of the following internal diaMtrs. with flush joints including testing of joints complete.

Supplying and Fixing Galvanized Steel Barbed Wire (IS: 278 – 1962 Type – I) weighing 9.38 kg per 100 metres (minimum), Straining and Fixing to any type of Standard Rails, Straining Bolts including securing with and provision of Galvanized Mild Steel Wire, staples or steel pins etc as directed (Posts and struts of wood concrete ,steel etc and straining bolts shall be paid for separately).

P/F Chain link fencing 2.40m height for internal switchyard portion complete in all respects excluding civil works, posts/struts etc as per the directions of EIC complete in all respects.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete.

P/L 100 mm dia PVC pipes (Diplast make to withstand pressure 4 kg/ sqcm & of rigid grade gold range) as per directions of EIC in weep holes of retaining/breast walls/cable trenches etc

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not be more than 5mm), including making drainage opening wherever required complete etc. as per the direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

Providing and laying three course ( as per manufacture 's guidelines ) smart care water proofing treatment with damp proof course with 10 years warranty

Providing laying & spreading and compacting 100mm thick Grade-I stone aggregate of 90mm to 40mm size to water bound macadam specification including spreading in uniform thickness hand packing rolling with thre whell 80-100KN static roller in stages to proper grade & camber applying and booming stone screening /binding material to fill up the interstices of coarse aggregate water & compacting required density grading -1 as per technical specifications by manual means i/c entire carriage of material in all leads and lifts as per the direction of Engineer - in Charge.

Provding laying & spreading and compacting 75mm thick Grade-II stone aggregate 63 to 40mm size to water bound macadam specification including spreading in uniform thickness hand packing rolling with smooth wheel roller 80-100KN in stages to proper grade and chamber and booming stone screening/binding material to fill up the interstice of coarse aggregate watering and compacting to the required density grading -2 as per technical specification by mechanical means including entire carriage of material in all leads and lifts as per the direction of Engineer in charge.

Providing laying & spreading and compacting 75mm thick Grade-III stone aggregate 50 to 25 mm size ot water bound macadam specification including spreading in uniform thickness hand packing rolling with smooth wheel roller 80-100KN in stages to proper grade and chamber and booming stone screening/binding material to fill up the interstice of coarse aggregate watering and compacting to the required density grading -3 as per technical specification by mechanical means including entire carriage of material in all leads and lifts as per the direction of Engineer- in -charge.

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 20 mm nominal bore

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc. 15 mm nominal outer dia Pipes

15 mm nominal dia

20 mm nominal dia

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 25 mm nominal dia

Providing and Fixing Floor Mounted white Vitreous china single piece , double traps, syphonic water closet of approved brand / make , shape and size and and pattern including integrated white vitreous china cistern of capacity 10 litres with dual Flushing system including all Fixtures with seat cover , cistern , Fittings , nuts , bolts and gasket etc including making connection with the existing P/S Trap complete in all respects as per the direction of Engineer in charge . ( Hindware / Cera ,/Jaguar make )

Providing and Fixing water closet squatting pan ( Indian W.C Pan) with 100 mm sand cast Iron P or S trap , 10 litre low level white PVC Flushing cistern , including flush pipe , with manually controlled device ( Handle lever) conforming to IS : 7231 with all Fittings and Fixtures complete , including cutting and making good the walls and Floors : White vitreous China Orissa W.C pan of size 580 x 440 mm with integral foot rests .

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : ( Hindware /Cera /Jaquar make)

One urinal basin with 5 litre white P.V.C. automatic flushing cistern ( Hindware , Cera , Jaguar make )

Providing and Fixing wash basin with C.I Brackets 15 mm C.P brass pillar taps, 32 mmm C.P brass waste of standard pattern , including painting of fittings and brackets , cutting and making good the walls whereever require : White Vitreous China Wash Basin size 630 x 450 mm with a pair of 15 mm C.P brass pillar taps. ( Cera , Hindware , Jaguar)

Providing and Fixing brass bib cock of approved quality : 15 mm nominal bore ( Hindware / Jaguar /Cera)

Providing and Fixing mirror of superior glass ( of approved quantity) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backings: Rectangular shape 453 X 357 mm

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.

Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.

Providing and Fixing PTMT grating of approved quality and Colour : Circular type 100 mm nominal dia

Providing and Fixing C.P Brass angle valve for basin mixer and geyser points of approved quality conforming to IS : 8931 15 mm nominal bore

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 20 mm nominal bore

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 25 mm nominal bore

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 32 mm dia

Providing and Fixing unplasticized PVC connection pipe with brass unions : 30 cm Length 15 mm nominal bore

Providing and Fixing 600 x 120 x 5 mm glass shelf with edges round off , supported on anodised aluminium angle frame with C.P Brass brackets and guard rail complete fixed with 40 mm long screws , eawl

Providing and White vitreous China pedestral for Wash Basin completely recessed at the back for the reception of pipe and Fittings ( Cera / Hindware / Jaguar)

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.

Providing and Fixing on wall Face unplasticised - PVC Moulded Fittings/ accessories for unplasticised - PVC Moulded Fittings/ accessories for unplasticised Rigid PVC rain water / soil waste / vent pipes conforming to IS : 13592 Type A , including jointing with seal ring conforming to IS : 5382 , leaving 10 mm gap for therrmal expansion

Coupler 110 mm dia

Single Tee without Door 110 X 110 X 110 mm

Bend 87.5 degree 110 mm dia

Single Tee with Door 110 X 110X 110 mm

Providing and Fixing PVC floor trap of self ceaning design including fixing with approved adhesive ,cost of cutting and making good the foors etc complete .110mm*75mm

Providing and fixing PVC clamps ISI marked of Approved Design with steel screws and rawal plugs etc complete

Providing and placing on terrace ( at all floor levels) polyethylene water storage tank IS : 12701 marked , with cover and suitable locking arrangement amd making necessary holes for inlet , outlet and over flow pipes and Floating Valve but without Fittings and the base support for the tank . (1000 Litres ) ( Vectus / Sintex make )

Providing and Filling of Brick Bat in Soak pit including Carriage in all respects.

Providing and Fixing PVC Cowl including Carriage of Materials with in all leads and lifts

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.

Providing and Fixing nickel plated M.S pipe curtain rods with nickel plated brackets 20 mm dia ( Heavy type)

Bidder Name

Amount in Words

SULTAN KATOCH (BID ID -465449)

JMM INFRACON (BID ID -453616)

WORLD CONSTRUCTION CO PRIVATE LIMITED (BID ID -454569)

NARESH KUMAR (BID ID -463843)

JMM INFRACON (BID ID -453616)

NARESH KUMAR (BID ID -463843)

WORLD CONSTRUCTION CO PRIVATE LIMITED (BID ID -454569)