BARC/CED/ET/28/2021-2022 Dated 14.09.2021

Amount

From 0.00 to 1.50 m depth from Average Ground Level

From 1.50 to 3.00 m depth from Average Ground Level

From 0.00 to 1.50 m depth from Average Ground Level

From 1.50 to 3.00 m depth from Average Ground Level

From 0.00 to 1.50 m depth from Average Ground Level

From 1.50 to 3.00 m depth from Average Ground Level

Providing and constructing Random Rubble masonry using approved Rubble stone in foundation and plinth in C.M 1:6 (using crushed sand) including raking out joints or simultaneous flush pointing below ground level / plinth level, curing etc. complete as per drawings and specifications.

Providing and constructing Random Rubble masonry using approved Rubble stone in super structure (above plinth) in C.M 1:6 (using crushed sand) including raking out joints or simultaneous flush pointing above ground level / plinth level and up to and including 20 m height including scaffolding, curing etc. complete as per drawings and specifications.

Supplying , cutting to shape and fixing specified diameter UPVC pipes as per IS 4985 in RR Masonry/ RCC walls for weep holes complete all as per drawings and as specified at site.

90 mm dia UPVC Pipes

110 mm dia UPVC Pipes

Providing and laying in position cement concrete of 1:4:8/M-5 (1 cement, 4 crushed sand, 8 graded stone aggregate of maximum size 20 / 40 mm) including consolidation, finishing, curing etc. complete as per specifications and drawings but excluding the cost of Form work shuttering, centering complete at all levels

Providing and laying in position cement concrete of 1:2:4/ M-15 with minimum cement content 320 Kg/Cum (1 cement, 2 crushed sand, 4 graded stone aggregate of nominal size 20 mm) including consolidation, finishing, curing etc. complete as per specification and drawings but excluding the cost of Formwork shuttering, centering and steel reinforcement at all Levels

Providing and laying in position Reinforced Cement Concrete (RCC) of grade M-30 using 20mm maximum size aggregates and crushed sand of approved quality including admixtures of approved brand and quality (plasticiser or super plasticiser) if required, including weigh batching, mechanical mixing, transporting, placing, vibrating, consolidation, finishing, curing etc. complete but excluding the cost of centering, shuttering and reinforcement complete as per specifications.

Up to Plinth Level.

Extra for RCC/PCC Using Ready Mix Concrete from outside project area including transporting and pumping from approved batching plants.

Supplying, stacking and laying of 230 mm thick rubble soling stones as under floor base including packing with smaller stone and compacting, ramming including spreading and consolidation of blinding material, moorum etc. complete all as per specifications and as directed by the Engineer-in-charge

Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-30 grade made with strong vibratory compaction and approved size, shape, design laid in required colour and pattern over and including 50 mm thick compacted bed of crushed sand, filling the joints with crushed sand etc. all complete as -per the direction of the Engineer-in-charge

Providing Reinforcement Steel for reinforced cement concrete at all levels including supplying, preparation of bar bending schedules, cutting, bending, transporting, fixing, tieing in position with PVC coated G.I binding wire, all labour charges, cost of cover blocks in specified grade of concrete etc. complete as per specifications and drawings. Steel supplied by the contractor

Using TMT bars of specified grades of all sizes. TMT bars to be supplied by the contractor from the own plants of SAIL, RINL or TATA make only using virgin materials

Providing, centering, shuttering Form work using steel plates, timber planks for all types of structures including necessary strutting, proping, staging, supports, bracings etc. and deshuttering the same after the specified time all as per drawings, specifications and as directed by the Engineer-in-charge at all levels .

For Sub Structure.

Providing and fixing GI chain link fabric fencing Made of GI wire of dia 4 mm of required width in mesh size 50 x 50 mm including strengthening with 2mm dia wire or nuts, bolts and washers as requeid complete as per direction of Engineer-in-charge.

Fencing with RCC post placed at required distance, embedded in cement concrete blocks every 15th post, last but one end post and corner post shall be strutted on both sides and end post one side only, provided with horizontal lines and two diagonals of barbed wire 9.38 kg per 100 metres (min) between the two posts fitted and fixed with G.I. staples on wooden plugs or G.I. binding wire tied to 6 mm bar nibs fixed while casting the post etc. complete as directed by the Engineer-in-charge. (cost of RCC posts, struts, earth work and concrete to be paid for separetely) : Payment to be made per metre cost of total length of barbed wire used

With S.S. barbed wire 12 swg

Providing, fabricating, erecting & in position CRIMPNET GATE with G.I.tublar frames,50mmX8 g G.I.crimpnet welded on 38mm i/d pipes with angle iron frame,m.s.flat beading to hold crimpnet, M.S.channel supports including pivot type hinges,locking arrangements,tower bolts,embedding posts in cement concrete 1:3:6 including cost of scaffolding ,excavation,PCC,Formwork & disposal of surplus soil, painting the gate and all steel work with two coat of approved paint over a coat of primer etc. complete genarally as per specification and drawing.( Gate Structural Steel post will be measured under relevant Item)

Providing G.I. Pipes medium Variety(Class B) for CRIMPNET GATE etc. including cutting of pipes as required,bending & welding including painting with two coat of synthetic Enamel paint over a coat of steel primer etc. complete.

Supplying & fixing in position 50 mmX 8 gauge G.I. CRIMPNET welded to pipes withG.I pipe frame using M.S.flat beading of 40mmx8mm to hold CRIMPNET including cost of M.S flats, scaffolding all material & labour etc. complete as per specifications.(Area of CRIMPNET Mesh alone will be measured.) Note: Iron posts, excavation, concrete, etc will be paid under relevant items.

Providing and fixing Stainless steel concertina barbed tape coil of 600 mm dia. made from stainless steel ribbon tape of 0.5 mm thickness, 19 mm width stretching the coil to 9 m approximate, fixing the coil with clips between "Y" armed and MS angle posts 2.44 m high from ground level, including supplying and fixing SS galvanized clips etc. complete as per manufacturer's specification and including painting by dipping method the concrtina tape coil with two coats of synthetic enamel paint of approved shade and make over a coat of approved primer at fabrication shop, before bringing the material to the site and fixing in position etc. complete as directed by the Engineer-in-charge.

600/ 610 mm Dia Concertina coils

Providing and Painting two coats of synthetic enamel paint on steel surfaces of approved brand and manufacture to give an even shade over a primer coat.including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge

Providing FLUSH pointing on stone masonry with cement moratr 1:3 using crushed sand as per specifications and as directed at site by the Engineer-in-charge

Providing and laying non pressure NP2 class RCC Hume pipes of approved make, with collars jointed with stiff mixture of cement mortar in the proportion of 1:2, laying to the levels, slopes and as per the drawings and specifications and as directed by the Engineer-in-charge including testing of joints etc. complete.

300 mm Dia RCC Hume pipe class Np2

Providing Structural steel work using angles, channels, joists and other sections, welded and / or bolted in built up sections for trusses , structural steel floors, frame works, monorails and other structures including supplying, cutting, welding, fabricating, hoisting, fixing in position, applying a priming coat of approved steel primer etc. complete all as per specifications, drawings and as directed by the Engineer in charge .

Up to and including 300 mm Joists, 350 mm channels, and below sections Using materials manufactured by SAIL/ RINL/ TATA or any other approved brands of BARC confirming to IS 2062. All test reports to be provided along with the supply of the materials.

Demolishing Stone rubble masonry (In cement mortar) manually / by mechanical means carefully without damaging adjacent structures including stacking of serviceable materials and disposal of unserviceable materials within 100 m lead as per direction of Engineer-in-charge

Providing, laying , jointing, fixing and testing heavy quality ( (ISI Marked C-Class) Galvanised Iron pipes and ISI marked fittings like, tees, elbows, bends, unions, nipples,reducers etc. as required for the work, including testing the pipes and fittings for 10.00 Kg / Sq.Cm hydralic pressure with a minimum period of two hours duration with clean water, including cutting , threading, jointing with hemp yarn, white lead, jointing teflon tape, chasing walls and making good by filling with concrete 1:3:6, complete all as per specifications and drawings, including two coats of anti corrosive bitumastic paint, all as directed by the Engineer-in-charge. Pipes with ISI marked 'C' -Class heavy quality pipes of approved make.

15 mm dia G.I pipe

20 mm dia G.I pipe

25 mm dia G.I pipe

Supplying and fixing Cast Iron Man hole or Cast Iron Steps cover of approved make and weight as specified in the drawings or as directed by the Engineer in charge.

Supplying and stacking of grade stone aggregate at site of size range

53 mm to 22.4 mm size stone aggregate

Providing and fixing dry stone pitching 22.5 cm thick laid in required profile with hammer dressed stones having no side less than 15 cm, with minimum depth of 20 cm including preparing the bedding surface etc. all complete as directed by the Engineer-in-charge

Preparation and consolidation of sub-grade (Proof Rolling) with power roller of 8 to 10T capacity including excavating earth to an average thickness of 22.5 cms depth, dressing to camber and consolidating with road roller including making good the undulations etc. and rerolling the subgrade and disposal of surplus earth within a lead of 200 m

Providing and laying, spreading and compacting granular sub-base (GSB) material 300 mm thick (150 mm thick in each layer) compacted layer of crushed sand, murrum, gravel crushed stone and combination there of as per specification including spreading on the prepared sub grade, maintaining the required slope and grade and cross fall (camber) etc. complete as directed by the Engineer-in-charge (Compacted thickness only will be measured and paid for.)

Providing, laying, spreading and compacting hand broken/ crushed stone aggregate, 250 mm thick Wet Mix Macadam including premixing of material with water in mixing plant for Wet Mix Macadam, carriage of mixed material by tipers to the site and laying material in uniform thickness and laying by mechanical paver including rolling with road roller 8.10 tonne capacity in stages to proper grade and camber spreading and brooming etc. complete as directed by the Engineer-in-Charge (Compacted thickness only will be measured and paid for.)

Providing laying bituminous macadam of thickness 50 to 75 mm as directed on prepared surface with spcified graded crushed stone aggregate for profile corrective base / binder course including loading of aggregate with FE loader, hot mixing of stone aggregates and bitumen in hot mix plant, transporting the mixed material by tippers to paver and laying the mixed material with paver to the requied level and grade and rolling with road rollers, as per specification to achieve the proper compaction but excluding the cost of primer / tack coat with bitumen of 60/70 grade (VG 20) @ 3.5% (percentage by weight of total mix)

Providing and laying dense bituminous concrete of thickness 25 to 40 mm as directed on prepared surface with specified graded stone aggregate for wearing course including loading of aggregate with FE loader and hot mixing of bitumen with filler and stone aggregate in hot mix plant transporting the mixed material by tippers to paver and laying the mixed material with mechanical paver finisher fitted with electronic sensing device to the requied level and grade and rolling with road rollers, as per specification, to achieve proper compaction but excluding cost of primer / tack coat with bitumen of grade 60/70 (VG 20) @ 7% (percentage by weight of total mix)

Providing and applying tack coat using hot straight run bitumen of grade 60/70 (VG 20) including heating the bitumen, spraying the bitumen mechanically / manually, cleaning and preparing the existing road surface as per specifications On WBM / WMM @ 0.75 kg / sqm

Providing and laying seal coat average 9.00 mm thiclness of premixed fine aggregate (passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade 60/70 (VG 20) bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface including rolling and finishing with road roller all complete.

Painting road surface marking with Thermoplastic paint hot applied to give uniform finish with Glass beeds / power Topping, on bituminous surface in white / yellow shade including cleaning the surface of all dirt, scales, oil, grease and other foreign material etc complete as directed by the Engineer-in-charge

Thermoplastic paint on bitumen sufaces

Providing and applying tack coat using hot straight run bituumen of grade 60/70 (VG 20) including heating the bitumen, spraying the bitumen mechanically / manually, cleaning and preparing the existing road surface as per specifications On bituminous surface @ 0.50 kg / sqm

Shree Enterprises

Shreeyash Construction

RESHMA CONSTRUCTION

SUNIL CONSTRUCTION

UCC INFRASTRUCTURE PVT LTD

JAIHIND ROAD BUILDERS PVT LTD