CONSTRUCTION OF TOILETS IN DEFERENT LOCATIONS AND IMPROVEMENT OF BATTERY CHARGING ROOM IN TECHNICAL AREA AT AF STATION GORAKHPUR

Amount

Excavation in trenches in soft/loose soil not exceeding 1.5 metre wide & not exceeding 1.5 metre depth for foundation etc and getting out, complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc. 25 cm in soft/loose soil complete all as specified and directed.

Removing excavated material to a distance exc 250 mtrs and n.exc. 500 mtrs and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

M/L PCC type D-2 1:4:8 (40 mm graded aggregate) as in foundation filling, sub base and mass concrete complete all as specified and directed.

M&L RCC M-25 design mix as in beams, cantilevers, lintels over 1.5m span etc complete all as specified and directed.

M&L RCC M-25 design mix as in foundation, footing, base of col, beam, lintel ,plinth beam, bases for column etc complete all as specified and directed.

M&L RCC M-25 design mix for columns and etc complete all as specified and directed.

M&L RCC M-25 design mix for slab and chajjas etc complete all as specified and directed.

M&L for use and waste form work to sides of concrete foundation, footing, bases of columns and similar works in vertical or to batter of fair finished surfaces complete all as specified and directed.

M&L for use and waste form work to sides of concrete columns and similar works in vertical or to batter of fair finished surfaces complete all as specified and directed.

M&L for use and waste form work to soffits of suspended slabs such as roof slabs, floor slabs, landings, Chhajja, and similar work n. exc. 200 mm thick, rough finished surface of complete all as specified and directed.

M&L for use and waste form work to sides of concrete beam, side and soffits of plinth beam and similar works or to batter of fair finished surfaces complete all as specified and directed.

M&L for brick work with sub class 'B' bricks old size straight or curved on plan exceeding 6 metre mean radius built in CM 1:6 complete all as specified and directed.

M&L for brick work with sub class B bricks old size laid straight or curved in plan any radius half brick thick wall built in cement mortar 1:4 complete all as specified and directed.

S&F mild steel TMT bar 10 mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for foundations, columns, beams and slabs hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clip complete all as specified and directed.

S&F mild steel TMT bar 8mm dia, cut to length, bent to shape required including cranking, bending, spirally for hooping for foundations, columns, beams and slabs hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clip complete all as specified and directed.

S&F mild steel TMT bar 8 to 10 mm dia, cut to length, bent to shape required including cranking, bending, spirally for hooping for stirrups hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clip complete all as specified and directed.

M&L for rendering 15mm thick in CM 1:6 on fair faces and of brick work or concrete surface finishing the surface even and smooth without extra cement complete all as specified and directed.

M&L for 15 mm thick rendering on fair faces of brick work or concrete surface in cement mortar 1:4 mixed with water proofing compound, finished even and smooth without using extra cement complete all as specified and directed. Note:- Water proofing compound shall be measured and paid separately as supply only.

M&L for rendering 5mm thick in CM 1:4 on ceiling surface and finishing the surface even and smooth without extra cement complete all as specified and directed.

Supply only integral liquid water proofing compound complete all as specified and directed. Make:- Dr Fixit Pidiproof LW+ or equivalent in specified make.

M&L for non skid ceramic coloured joint free tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed.

M&L for joint free glazed ceramic coloured tiles 350x250x7 /450x350x7mm thick for work on vertical surface such as skirting, dado, set & jointed in cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed.

M&L for screed bed or bedding layer in CM 1:6, 15mm thick complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of wall or concrete surfaces in CM 1:4 finished rough for wall tiling complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base of floor complete all as specified and directed.

M&L for hard core of broken stone or boulders of gauge n.exc 63 mm deposited spread and leveled in layers n.exc 15 cm thick watered and rammed to a true surface complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-2 using 40mm graded mechanically crushed stone aggregate as in plinth protection finished even and smooth without using extra cement with & including 10mm wide, 30mm deep joints at the rate of 3.00 mt centre to centre and at every turning & filling the joints with bitumen & sand mixture complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded mechanically crushed stone aggregate as in benching, padding, coping etc including necessary form work complete all as specified and directed.

M&L for moorum filling in floors or paving, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L for Anti termite treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed.

M&L for Anti termite treating the soil under plinth protection at the rate of 5 liter of emulsion per square metre of surface area complete all as specified and directed.

M&L for treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying three coat of white wash complete all as specified and directed.

M&L for preparation of new surfaces and applying three coat of white wash on ceiling complete all as specified and directed.

S&F Factory made solid PVC Chowkhat /Door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5 mm thick rigid PVC foam sheet coloured, reinforced with 19x19mm MS square tube of 19 gauge including rubber gasket, PVC fasteners, screws, brackets as per SSR Part-II (2010) complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rails on either side & as gap insert for top rail & bottom rail. Paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing as mentioned in SSR-2010.

S&F 100mm long type C-21, Butt hinges, extruded aluminum alloy with galvanized mild steel hinge pin, anodised complete all as specified and directed.

S&F aluminum handle cast type anodized size 125 mm long, complete all as specified and directed.

S&F Aluminimum anolised barrel tower bolt of extruded section 150mm long, complete all as specified and directed.

S&F 250mm long Aluminium anodized sliding door bolt with hasp & staple (bolt type) fixing clips of sheet cast or extruded section & fixing bolts, sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

S&F GI tubing, 15 mm bore 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F GI tubing, 20mm bore 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F 500 ltrs capacity rotational moulded polyethlene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

S&F ball valves, high pressure, with polythene float and fly nut complete, screwed for iron pipe 20mm bore or brass ferrule complete all as specified and directed.

S&F bib tap 15mm bore, chromium plated fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.

S&F stop valve 15mm bore, cast copper alloy, with long shank and cup screwed down, high pressure, with crutch of butterfly handle, screwed both ends for iron pipes or for unions complete all as specified and directed.

S&F stop valve 20mm bore, cast copper alloy, with long shank and cup screwed down, high pressure, with crutch of butterfly handle, screwed both ends for iron pipes or for unions complete all as specified and directed.

S&F low level flushing cistern PVC 10 ltrs capacity with all internal fittings, bracket and 32mm bore PVC flush pipe, complete all as specified and directed.

S&F angle cock, long shank fancy type C.P. cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions and fixed 15mm bore complete all as specified and directed.

S&F PVC connections 15 mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F vitreous china wash basin white flat back type of size 550x400mm including brackets complete all as specified and directed.

S&F CP waste coupling 32mm dia complete all as specified and directed.

S&F 15mm bore dia of pipe pillar taps cast copper alloy with capstan heads, chromium plated screwed down high pressure with or without lattered hot or cold with long screwed shanks and fly nuts serewed for iron pipe complete all as specified and directed.

S&F Vitreous china semi pedestal pattern, EWC, Anglo Indian type, white including fixing bolts, but excluding flushing cistern and flush pipe and connection to drain (or out going pipe) etc. complete and making good to floor complete all as specified and directed.

S&F vitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete incl urinal spreader and providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 complete all as specified and directed.

S&F 32mm bore PVC waste pipe complete all as specified and directed.

S&F PVC (SWR) 75mm pipes single socketed in any length with rubber ring joints walls complete all as specified and directed.

S&F PVC (SWR) pipes 110mm single socketed in any length with rubber ring joints complete all as specified and directed.

S&F PVC (SWR) 75mm bend complete all as specified and directed.

S&F PVC (SWR) 110mm bend complete all as specified and directed.

S&F PVC (SWR) floor trap 75mm dia plain with PVC grating including jointing with solvent cement complete all as specified and directed.

S&F PVC (SWR) gully trap 125/110mm setting and jointing with solvent cement complete all as specified and directed.

S&F PVC(SWR) vent cowl 75mm dia bore complete all as specified and directed.

S&F brass chromium plated tubular towel rail 20mm dia 600 mm long, fixed complete all as specified and directed.

S&F CP toilet paper holder fixed to wall complete all as specified and directed.

S&F chromium plated Jet spray health faucet with 1 Meter PVC Tube and hook complete all as specified and directed.

S&F PTMT grating doom 100mm dia complete all as specified and directed.

M&L for powder coated anodised aluminium (sliding/ hanging type) windows/ventilator with frame size 60x40x2.00mm thick and shutter with section bearing bottom 25x18x1.50, top 39.4x17.7 X1.50 mm ( suitable for moving over three track fixed over top of frame work, top and side section of size 61.6 x 31.75x1.5mm and bearing bottom track of size 61.6x 31.75x1.5mm or fixing with hinges steel wire cloth 0.36mm nominal dia of wire and average width of aperture1.4 mm including necessary aluminium jointing cleats, glazing cleats, rubber packing anodised shape beading, screws etc with 5mm thick tinted/ plain glass in panels incl anodised aluminium grill with all fittings & fixture complete all as specified and directed.

Material and labour for providing roof treatment complete all as specified and directed with followings:- (a) M&L plastering 10 mm in CM 1:4 using 100% course sand on roof including WPC @ 3%by weight of cement) (b) Applying a coat of bitumen primer @ 0.50 ltrs/sqmts and allow to dry. (c) Applying one coat of hot blown bitumen grade 85/25 @ 1.20 Kg/sqmts. (d) Applying and laying polymeric water proofing membrane weight not less than 3 kg/sqmts. (e) Applying aluminium paint one coat.

M/L PCC type C-2 1:3:6 (40 mm graded aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M&L for concrete bed to drain pipes of 150mm internal dia pipe in PCC 1:3:6 type C-2 using 40 mm graded stone aggregate including packing under ,and haunching against sides of pipes after they are laid and tested complete all as specified and directed.

M&L for 150 mm internal dia salt glazed stone ware drain pipes laid in trenches and jointed complete all as specified and directed.

M&L for cutting into existing manhole for connecting drains, making good to drain pipes and rendering and cutting out existing benching for forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required for 150 mm integral dia of pipes complete all as specified and directed.

M&L for brick work with sub class 'B' bricks old size straight or curved on plan exceeding 6 metre mean radius built in CM 1:4 complete all as specified and directed.

M&L for precast cement concrete 1:2:4 type B-1 using 20mm graded mechanically crushed stone as in cover slab for manholes etc, set and jointed in cement mortar 1:4 including necessary form work complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified .

M&L for cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in roof kerb or mud stops, rounded or chamfered on edges surface finished even and smooth without using extra cement, mixed with liquid water proofing compound @100 ml per 50 Kg of cement bag complete all as specified and directed. Note: WPC will be measured and paid separately.

M&L for 40mm thick cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in roof padding to maintain proper slope mixed with water proofing compound @ 3% by weight of cement, complete all as specified and directed. Note:-WPC will be measured & paid separately)

M&L for 10 mm thick rendering on fair faces of brick work or on concrete surface in CM 1:3 finished surface even and smooth without using extra cement mixed with liquid water proofing compound @100 ml per 50 Kg of cement bag complete all as specified and directed. Note: WPC will be measured and paid separately.

M&L for providing roof treatment as per latest zonal specification specified:- (a) Applying a coat of bitumen primer @ 0.25 ltrs/sqmts and allow to dry. (b) Applying one coat of hot blown bitumen grade 85/25 @ 1.20 Kg/sqmts. (c) Applying APP modified polymeric membrane of weight not less than 3.0Kg/Sqm laid and bonded to the sub strata by heat process, over laps of 100mm shall be sealed/fused by flame torch application as per manufacturer instructions.

M&L for 40 mm thick brick tiles laid over 15 mm thick screed in CM 1:4 as bedding layer using 100% coarse sand jointed including jointing and pointing the tile in CM 1:3 mixed with linseed oil @ 5% by weight of cement complete all as specified and directed.

Taking down cement or cement lime plaster any description on brick or stone walls, etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified as directed.

M&L for preparation of new plastered surface of wall and applying two coat of cement base paint in camouflage pattern over a coat of primer complete all as specified and directed.

M&L for complete removal of existing treatment by scrapping, washing, rubbing down & stopping etc of old painted surfaces and applying two coat of cement base paint in camouflage pattern over a coat of primer complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying two coat of oil emulsion distemper over a coat of primer complete all as specified and directed.

M&L for complete removal of existing treatment by scrapping, washing, rubbing down & stopping etc of old painted surface of wall and applying two coat of oil emulsion distemper over a coat of primer complete all as specified and directed.

M&L for preparation of new plastered surface of ceiling and applying two coat of oil emulsion distemper over a coat of primer complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins, pillars etc but excluding ashlar facings, dressed stone work and pre-cast articles complete all as specified and directed.

Demolition of RCC of any description and in any position not other wise specially provided for reinforcement cut as required to facilitate demolition complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for 25mm thick cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sub base of floor, complete all as specified and directed.

M&L for machine cut pre polished Kota stone slab 18 to 20mm thick (minimum size 30cmx 45cm) as in flooring, laid over and including cement screed bed 20 mm thick in cement mortar 1:4, and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polishing complete all as specified.

M&L for 18-20mm thick marble stone tile (Makrana white) including rubbing, polishing and necessary moulding complete fixed over 15mm thick screed bed in CM 1:4 and pointing with white cement 1:2 using marble dust admixture to pigment to match the surface complete all as specified and directed.

All as per item No. 96 but as in skirting/ dado or on vertical surfaces laid over and including screed bed 10 mm thick in cement mortar 1:4.

S&F non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18sqm and n.exc. 0.38 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15 mm thick screed bed in cement mortar 1:6 etc complete all as specified and directed.

S&F acid resistant tiles 15mm thick, vitreous ceramic, unglazed, set, jointed and pointed in chemical resistant mortar, resin type, in floors, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15 mm thick screed bed in cement mortar 1:4 etc complete all as specified and directed.

All as per item No. 99 but as in skirting/ dado or on vertical surfaces laid over and including screed bed 10 mm thick in cement mortar 1:4.

Taking down chawkhats or frame with shutter (without taking out shutter from the frame exc 1.50 sqm and n.exc 4 sqm each and removing from site complete all as specified and directed.

Taking down shutter of any description n.exc 1 sqm each and removing from site complete all as specified and directed.

M&L second class hard wood plain, solid, chowkhat and frames wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified as directed.

S&F 35mm thick 2nd class hard wood factory made plain framed panel shutter (2 panel) with lock rail and panel of 9mm BWP commercial ply or 12 mm veneered particle with commercial veneering on both faces . The size of rail & style as per IS 1003 (Part I) kiln seasoned and chemically pressure treated .

M&L for second class hard wood glazed and skeleton shutter 30mm thick, factory made, open rebated and prepared to receive glass/gauge etc, with sash bars, mitered and rebated, with edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass/gauge etc, sizes of stiles, rails etc as specified in Section 8, clause 8.24(b) of SSR part-I (2009).

S&F 100mm size mild steel butt hinges, medium weight cold rolled complete all as specified and directed.

S&F 75mm size mild steel butt hinges, medium weight cold rolled complete all as specified and directed.

S&F Aluminimum anolised barrel tower bolt of extruded section 100mm long, complete all as specified and directed.

S&F extruded aluminium alloy handles, fabricated type, anodised of size 100mm, complete all as specified and directed.

S&F extruded aluminium alloy handles, fabricated type, anodised of size 150mm, complete all as specified and directed.

S&F 300mm long Aluminium anodized sliding door bolt with hasp & staple (bolt type) fixing clips of sheet cast or extruded section & fixing bolts, sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

S&F 150 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor complete all as specified and directed.

S&F 4mm thick sheet glass, ordinary quality and glazing with wooden beads/oil putty in square n.exc 0.5 sqm in each pane complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of wood or wood based materials of any description, not other wise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel of any description, over 10cm in width or girth and apply two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F mild steel flat iron 25x3mm as in hold fasts etc, confirming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in filling of hold fast hole complete all as specified and directed.

Taking down rain water/vent pipe of any description including fittings etc complete all as specified and directed.

S&F PVC(SWR) vent cowl 110mm dia bore complete all as specified and directed.

S&F PVC (SWR) junction single, (Single T) equal or unequal 110mm dia bore complete all as specified and directed.

Taking up or down steel tubing and connections 15mm bore complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern EWC including trap, seat cover, including connection to trap /drain and to flushing pipe anti syphonage pipe etc complete including making good floor complete all as specified and directed.

S&F in repair 10 Litre capacity PVC low level flushing cistern with ball valve and handle / push button, 32mm dia PVC flush pipe complete all as specified and directed.

S&F in repair vitreous china wash basin white flat back type of size 550x400mm including cutting for and pinning in ends of brackets including 32mm dia chromium plated waste coupling, PVC waste pipe, brackets all as specified and as directed.

S&F in repair soap dish CP any size complete all as specified and directed.

S&F in repair 15mm bore pillar taps CP brass chromium plated fancy type screwed down high pressure with chromium plated screwed shanks and fly nuts complete screwed for iron pipe in repairs complete all as specified and directed.

S&F in repair toilet paper holder complete all as specified and directed.

S&F in repair brass chromium plated tubular towel rail 20mm dia 600 mm long, fixed complete all as specified and directed.

S&F in repairs sheet glass shelf assembly consisting of 5.50mm thick glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F in repair concealed stop/angle cock 15 mm bore fancy type, chromium plated, with long shank and cup, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair PVC connection 15mm size with PTMT nuts, of length 450mm complete all as specified and directed.

S&F in repairs 15 mm bore bib tap brass chromium plated fancy type with crutch or butterfly handle screwed down, screwed for iron pipe complete all as specified and directed.

S&F in repairs grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed.

S&F in repair vitreous china urinal half stall size 590x390mm complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, flush pipe, grating and union for discharge pipe (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.

M&L for non asbestos 4mm thick fiber cement building boards fixed or laid/inserted to aluminium frame work with screws as in false ceiling fixed in ceiling flat or sloping including aluminium anodised snap grid frame work of size 605x605mm for false ceiling with hanging arrangement of 6mm dia G .I. wire (upto 1200 mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40x3 mm size and 60mm long and expansion hold fasteners 12.50mm dia 40mm long including taking out old ceiling complete all as specified and directed.

M&L for one light/fan point controlled by one switch point wiring with (FRLS) flame retardant low smoke PVC insulated unsheathed cable 1.5 sqmm with multistranded copper conductor, in and including non metallic PVC concealed conduit not less than 20mm dia with fittings, including all tees, bell mouth tube ends and fixing accessories such as couplers, saddles, pipe hooks etc including provision of sunken pressed steel GI terminal boxes of not less than 1.6mm wall thickness, concealed in wall with modular top cover and plate including (FRLS) flame retardant low smoke PVC insulated copper earth conductor 1.50sqmm connected to common earth and earth dolly complete all as specified and directed.

S&F switch piano, flush type 5 amp, single pole, one way 240 volt complete all as specified and directed.

S&F ceiling rose surface bakelite, 65X50 mm three terminals complete all as specified and directed.

S&F 20 watt LED light fitting engineering plastic batten with white acrylic cover LED light (integrated LED channel) natural white, energy saving complete with its all accessories internally perwired and including connecting up with twin core twistered flexible copper conductor cable of suitable size complete all as specified and directed. Make:- Havells Cat part No.LHEXBXPNIN1W020 or equivalent in Bajaj /CG.

S&F 9 watt LED light fitting engineering plastic batten with white acrylic cover LED light (integrated LED channel) natural white, energy saving complete with its all accessories internally perwired and including connecting up with twin core twistered flexible copper conductor cable of suitable size complete all as specified and directed. Make:- Havells Cat part No.LHEXBXPNIN1W009 or equivalent in Bajaj /CG.

M&L for sub main wiring with 2 Nos single core PVC insulated unsheathed 4.0 sqmm stranded copper conductor cable and 1 No single core PVC insulated-unsheathed 2.5 sqmm stranded copper conductor cable for earth continuity, drawn in & including suitable PVC casing & capping /PVC pipe with all fittings ISI mark complete all as specified and directed. Note:- (length of 2 No 4.0 sqmm conductor cable, 1 No 2.5 sqmm conductor earth continuity cable and accessories shall be measured as one unit length)

S&F sheet metal enclosure distribution board SPN 2 ways complete all as specified and directed.

S&F MCB SP 6 to 32 Amp 240 volts 10 KA breaking capacity 'C' curve complete all as specified and directed.

S&F MCB SPN 40 Amp 240 volts 10 KA breaking capacity 'C' curve complete all as specified and directed.

S&F exhaust fan (air freshener) single phase 230/240 volt AC 250mm sweep with louvers, plastic body, including cutting holes of suitable size in wall, grouting of nuts and bolt etc required for fixing fan and making connection with twisted copper flexible wire 23/0.0076 mm complete all as specified and directed.

S&F integral building security LED light fittings with pressure dia cast aluminium of 25 watts and including and connecting up ceiling rose and fittings with 3 core, PVC insulated multistranded copper conductor cable of 1.5 Sqmm complete all as specified and directed. Make:- BAJAJ Model No. BRLEP 25W LED or equivalent in Havells/CG.

S&F brackets made out of 32mmm dia medium grade GI pipe 1.50 mtr long bent to shape and size fixed on location using new 2 nos 30x5mm FI clamps made to shape incl nuts, bolts & washers complete all as specified and directed.

Taking down carefully copper/aluminium point wiring light/ fan/ bell/ socket or power complete (fittings such as switches, sockets, ceiling rose, pendent holders, light fittings etc are to be measured separately) and/or drawing out from existing conduit/ batten and making good disturbed surfaces of walls/ floors/ ceilings complete all as specified and directed.

M&L for one light/fan point controlled by one switch point wiring with (FRLS) flame retardant low smoke PVC insulated unsheathed cable 1.5 sqmm with multistranded copper conductor, in and including non metallic PVC concealed conduit not less than 20mm dia with fittings, including all tees, bell mouth tube ends and fixing accessories such as couplers, saddles, pipe hooks etc including provision of sunken including provision for modular box including (FRLS) flame retardant low smoke PVC insulated copper earth conductor 1.50sqmm connected to common earth and earth dolly complete all as specified and directed.

All as per item No. 150 above but for one socket outlet 3/5 pin 5/6 amps independent controlled by one switch.

All as per item No. 150 above but for one socket outlet 3/5 pin 5/6 amps independent controlled by one switch on same board.

M&L for point wiring with (FRLS) flame retardant low smoke PVC insulated unsheathed cable 2.5 sqmm with multistranded copper conductor, in and including non metallic PVC concealed conduit not less than 20mm dia with fittings, including all tees, bell mouth tube ends and fixing accessories such as couplers, saddles, pipe hooks etc including provision of sunken for modular box including (FRLS) flame retardant low smoke PVC insulated copper earth conductor 1.50sqmm connected to common earth and earth dolly complete for 3 pin 15 Amps socket independent. Note for item Nos 150 to 153:- (i) Rate quoted shall be inclusive of cutting chases and making good the disturbed surfaces to match the existing surface. (ii) Sunken box, cover plate with frame, Switches, Socket outlet, call bell, bell push and fan regulators shall be measured and paid separately.

S&F modular switch single pole 1 way, 1 module, 6 Amp complete all as specified and directed.

S&F modular switch single pole 1 way, 2 module, 16 Amp complete all as specified and directed.

S&F modular socket out let multipurpose 6A -2/3 pin, SP 1 way 2 module complete all as specified and directed.

S&F modular socket out let multipurpose 6A/16A-2/3 pin, SP 1 way 2 module complete all as specified and directed.

S&F modular fan regulator 240 V electronic type 2 module complete all as specified and directed.

S&F modular white cover plate with frame 3 module complete all as specified and directed.

S&F modular white cover plate with frame 4 module complete all as specified and directed.

S&F modular white cover plate with frame 6 module complete all as specified and directed.

S&F modular metal flush box made of 1.6mm thick GI 3 module complete all as specified and directed.

S&F modular metal flush box made of 1.6mm thick GI 4 module complete all as specified and directed.

S&F modular metal flush box made of 1.6mm thick GI 6 module complete all as specified and directed.

S&F in replacement 20 watt LED light fitting engineering plastic batten with white acrylic cover LED light (integrated LED channel) natural white, energy saving complete with its all accessories internally perwired and including connecting up with twin core twistered flexible copper conductor cable of suitable size complete all as specified and directed. Make:- Havells Cat part No.LHEXBXPNIN1W020 or equivalent in Bajaj /CG.

S&F in replacement recess mounting LED luminaire of size 2'x2' white 36 watt, 230 volts for POP ceiling with driver connector block etc complete with all accessories prewired and including connecting up with twin core twisted flexible copper conductor of suitable size complete all as specified and directed. Make:- Havells Cat part No. PLUTONEO2X2PLR or equivalent in Bajaj /CG.

S&F in replacement 9 watt LED light fitting engineering plastic batten with white acrylic cover LED light (integrated LED channel) natural white, energy saving complete with its all accessories internally perwired and including connecting up with twin core twistered flexible copper conductor cable of suitable size complete all as specified and directed. Make:- Havells Cat part No.LHEXBXPNIN1W009 or equivalent in Bajaj /CG.

S&F in replacement integral building security LED light fittings with pressure dia cast aluminium of 25 watts and including and connecting up ceiling rose and fittings with 3 core, PVC insulated multistranded copper conductor cable of 1.5 Sqmm complete all as specified and directed. Make:- BAJAJ Model No. BRLEP 25W LED or equivalent in Havells/CG.

M&L for replacement sub main wiring with 2 No single core PVC insulated unsheathed 4.0 sqmm stranded copper conductor cable and 1 No single core PVC insulated-unsheathed 2.5 sqmm stranded copper conductor cable for earth continuity, drawn in & including suitable PVC pipe with all fittings ISI mark complete all as specified and directed. (length of 2 No 4.0 sqmm conductor cable, 1 No 2.5 sqmm conductor earth continuity cable and accessories including chase cutting shall be measured as one unit length)

M&L for replacement sub main wiring with 2 No single core PVC insulated unsheathed 6.0 sqmm stranded copper conductor cable and 1 No single core PVC insulated-unsheathed 4.0 sqmm stranded copper conductor cable for earth continuity, drawn in & including suitable PVC pipe with all fittings ISI mark complete all as specified and directed. (length of 2 No 6.0 sqmm conductor cable, 1 No 4.0 sqmm conductor earth continuity cable and accessories including chase cutting shall be measured as one unit length)

S&F exhaust fan single phase 230/240 volt AC 300mm sweep, 1400 RPM, metal body, including cutting holes of suitable size in wall, grouting of nuts and bolt etc required for fixing fan and making good to match the existing surface and making connation with twisted copper flexible wire 23/0.0076mm and writing MES No with black paint complete all as directed. Make: Havells/ Bajaj/ Almonard

S&F in replacement factory made epoxy powder coated distribution board double door TP& N 4 ways (VTPN MCB DB) with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knock outs complete all as specified and directed.

S&F in replacement MCCB,4 pole, 100 Amps , 16 KA current rating conforming to IEC-609472 & IS-139473 to be fixed in distribution board complete all as specified and directed.

S&F in replacement factory made epoxy powder coated distribution board SPN 8 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts complete all as specified and directed.

S&F in replacement MCB, SP, 10 to 32 Amps, 'C' curve, 10 KA breaking capacity, 240 volts complete all as specified and directed.

S&F in replacement MCB, SPN, 32 to 40 Amps, 'C' curve, 10 KA breaking capacity, 240 volts complete all as specified and directed.

S&F in replacement sheet metal enclosures with socket plug top and MCBs with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified.

S&F in replacement MCB changeover two way centre off changeover switch, DP, 63 Amps, 'C' curve, 10 KA breaking capacity, 240 volts complete all as specified and directed.

M&L in replacement for earthing complete as in replacement with galvanized steel earth plate 60cmx60cmx6 mm thick buried vertically in ground to depth not less than 2.25 metres below ground level, with top edge of earth plate not less than 1.5 m below ground level, connected to earth lead GI 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and connection to main switch board of panel, including watering pipe GI 20 mm bore light grade, including protection pipe GI medium grade 15mm bore for earthing lead, wire mesh, funnel, salt, charcoal dust, excavation and refilling pit with PCC 1:2:4 type B1, precast RCC cover using XPM reinforcement weighing not less 4kg/sqm in lieu of CI cover and frame all as shown in electric plate of SSR part-I (2009), including testing on completion all as directed.

DEEP ENTERPRISES

ANIRUDH ENTERPRISES