Special repairs to Bldg No. P-12 and P-13 of KV No. 4 under GE East Jalandhar Cantt.

Amount

Dismantling of brick tiles or terracing tiles laid bedded and pointed in cement mortar in single layer on roofs complete all as specified and directed by Engineer-in-charge.

Demolition of mud in roofs any thickness including plastering and leeping (weather full thickness removed or part there of) complete all as specified and as directed by engineer-in-charge.

Material & labour for cutting grooves in brick wall 75 mm wide and 65 mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified.

Material & labour for wire brushing and cleaning top surface of cement concrete , including flashing and juction of parapets etc complete all as specified and directed.

Material & labour for brushing with neat cement slurry with 3 kg of cement per sqm complete all as specified and directed.

Material & labour for PCC (1:2:4) type B-0 (using 12.5 mm graded stone aggregate) as in lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands plinth cources, roof kerbs or mud stops, benching, coping, bed plates, parapets, water throughs and the like etc including weathering, slightly rounded or chamfered angles throating etc complete including necessary form work complete all as specified and directed.

Material & labour for 10mm thick cement plaster in cement mortar (1:3) on brick or concrete surfaces with water proofing compound and finishing the surface even and fair including cleaning the roof top by scrapping down with water etc complete all as specified and directed.

Material & labour for bitumen primer applying on plastered surface of roofs @ 0.4 Kg / sqm for use in waterproofing and damp proofing treatment complete all as specified and directed.

Material & labour for applying evenly a tack coat of hot blown industrial bitumen 85/25 at the rate of 1.2kg/sqm as a bonding in two coats , one on primed surface and second on APP based polymeric membrane including cleaning surface complete all as specified.

M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid on primed surface by torching with blow lamp application complete all as specified. complete all as specified and directed.

M&L for cement concrete tiles 250mm x 250mm x 22mm thick, machine pressed set jointed and pointed in neat cement slurry with grey cement and pigments over and including 15 mm thick screed bed in CM 1:4 complete all as specified and directed.

Demolition of cement concrete in ground floor and paving n. exc. 15cm thickness (below or above ground level) complete all as specified and directed.

Material & labour for 75mm thick PCC (1:3:6) type C-1 ( using 20mm graded stone aggregate) as in plinth protections and path etc finishing the concrete surfaces even and fair without using extra cement & joint filled with bitumen sand mixer complete all as specified and directed.

Material & labour for 40mm thick PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate), as in floor finishing the surface even and smooth without using extra cement complete all as specified & directed.

Demolition of brick work or stone masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc complete all as specified and directed.

Material & labour for brick work with sub class 'B' bricks, old size, straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar (1:6) complete all as specified and directed.

Taking down cement plaster/ terrazzo cast in situ of any description thickness including racking out joints hacking for key, scrubbing down with water etc. and removing rubbish complete all as specified and directed.

Material & labour for 15mm thick cement plaster in cement mortar (1:6) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified

Material & labour for 15mm thick cement plaster in cement mortar (1:4) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified

Material & labour for 5mm thick cement plaster in cement mortar (1:3) as on ceiling, soffits of RCC shelves, surfaces finished even and smooth without using extra cement complete all as specified and directed.

Dismantling asbestos cement (corrugated or semi corrugated etc) sheets in roof coverings complete all as specified and directed.

Supply & fix pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified & directed.

Supply & fix pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified & directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) of any thickness incl cover fillets etc complete all as specified and directed.

Material and labour for 4mm thick asbestos fibre cement plain building boards fixed to frame work with screws as in flat ceiling complete all as specified and directed

Supply and fix rolled sections as in framing for cladding, glazing, ceiling frame work, suspenders and the like fixed with angle cleats and connecting plates etc including a coat of red oxide primer complete all as specified and directed.

Material & labour for preparation of newly plastered or unplastered surface of walls and applying two coats of cement base paint complete all as specified and directed.

Material & labour for preparation of new plastered surface of ceiling and applying three coats of white washing complete all as specified and directed.

Material & labour for preparation of newly plastered surface of walls and applying two coats of oil bound distemper over one coat of priming on plastered and other surfaces complete all as specified and directed.

Supply & fix rotational moulded polythene water storage tank triple layer, ISI Marked of capacity 500 litre cylindrical vertical with closed top hoisted in position including dismantling of existing tank of any description complete all as specified and directed.

Supply & fix rotational moulded polythene water storage tank triple layer, ISI Marked of capacity 1000 litre cylindrical vertical with closed top hoisted in position including dismantling of existing tank of any description complete all as specified and directed.

Supply & fix ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball complete screwed for 20mm bore dia of iron pipe or brass ferrule complete all as specified (Minimum weight 210 grams) complete all as specified and directed.

Taking up or down 15mm dia bore old steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 20mm dia bore old steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

Supply and fix galvanised iron tubes 15mm bore, medium grade with & including all fittings fixed to wall, ceilings and or laid in floors etc complete all as specified and directed.

Supply and fix galvanised iron tubes 20mm bore, medium grade with & including all fittings fixed to wall, ceilings and or laid in floors etc complete all as specified and directed.

Demolition and breaking up drain pipes AC/PVC not exc 150mm dia set in cement mortar incl all fittings complete all as specified and directed.

Supply & fix 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including necessary cutting chasing etc. complete all as specified and directed.

Supply & fix PVC (SWR) 110mm bore bends any radius complete all as specified and directed.

Taking down chowkhats or frame with shutter (with or without taking off shutter from the frame) area n exc. 1.5 Sqm each for doors and windows complete all as specified and directed.

Taking down chowkhats or frame with shutter (with or without taking off shutter from the frame) area exc 1.5 Sqm but n. exc 4 sqm each for doors and windows complete all as specified and directed.

Supply and fix mild steel framed work as in doors chowkhats or frames, cooler stand or other section with gusset plates, rails, braces, etc. using steel conforming to Fe-290 Gde-E-165 complete including drilled for fixing of steel sheeting or other covering; doors, door frames, chowkhats etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing including necessary cutting drilling and welding etc complete all as specified and directed.

Supply and fix 35mm thick factory made plain framed, panelled shutters (two panels), with lock rail and panels of 9mm thick BWP commercial ply or of venered particle board 12mm thick with commercial veneering on both faces with rails and style of 2nd class hard wood. The size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

Supply and fix 2nd class hard wood factory made glazed and skeleton shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in clause 8.24 (a) of SSR Part-I; supplied and fitted to chowkhats complete all as specified and directed.

Supply & fix 125 mm size mild steel butt hinges, ISI marked, medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and directed.

Supply & fix mild steel sliding door bolts 300mm long stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

Supply & fix MS pressed handles, oval type, stove enameled black 150mm size complete all as specified and directed.

Supply & fix MS barrel tower bolt ISI marked 200mm long stove enameled black with bright bolt and fixed complete all as specified and directed.

Supply & fix Steel windows 1.25 mm thick Box type (primer coated) ERW hollow ‘P’ section of size 60mm x 25mm single rebated comprises of glazed skeleton shutter EWR Sec 50mmx20mm and 1mm thick and two open able leaf consisting two Nos sash bar of ‘T’ section 20mm x 3mm complete welded to frame with one vertical mullion of EWR box type ‘T’ section of size 60mmx25mm and 1.25mm thick including cuttings holes and making good dismantled portion in PCC (1:2:4) type B1 using 20mm graded stone aggregate including following fittings welded to framed shutter :- (a) Holdfasts 150mm long 12mmx3mm made to shape per window -04 Nos, (b) Handle of Z Sec 20mmx25mm, 100mm long per leaf-01 No, (c) MS tower bolt 150mm long per leaf -02 Nos, (d) ‘Z’ sec 20mm x 25mm, 100 long stopper per leaf -01 No, (e) Cleat 55 mm long of hollow square 15mmx20mmx63mm welded to hinges per leaf -01 No, (f) MS pintal hinges of size 75mmx12mm per leaf -02 Nos, (g) Fabrication and fixing arrangement as per drawing No CEJZ/TD/1019, Sh 1/3 to 3/3 and No. CEJZ/TD/1020, Sh 1/3 to 3/3.

All as per srl item No. 49 here in before but of gauged shutter complete all as specified and directed.

All as per srl item No. 49 here in before but as in ventilator fixed type complete all as specified and directed. Note for item No. 49, 50 & 51 :- Drg No. CEJZ/TD-1019 & 1020 are not being uploaded and the same can be seen in office of CWEJRC on any working da and Glass / wire gauge and grills/guard bars shall be measured and paid separately.

Supply and fix mild steel framed work as in guard bars/grills, grating etc with end of bars shouldered and/ or riveted or forged in to spikes and similar works including one shop coat of zinc chromate primer complete conforming to Fe-290, Gde E-165 all as specified and directed.

Supply and fix galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

Supply and fix 4 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

Material & labour for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Material & labour for preparation of new steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Material & labour for complete removal of existing treatment on walls by washing, rubbing down and stopping etc and applying two coats of oil bound distemper over one coat of primer complete all as specified and directed.

Material & labour for preparation of old plastered surface of ceiling and applying two coats of white wash complete all as specified and directed.

Material & labour for complete removal of existing treatment on walls by washing, rubbing down and stopping etc and applying two coats of cement base paint on plastered and other surfaces complete all as specified and directed.

Material & labour for preparation of ceiling board and applying three coats of white washing complete all as specified and directed.

Material & labour for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Material & labour for providing precast cement concrete 1:2:4 type B-1 (20mm graded stone aggregate) as in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex, stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar complete with joints to match complete all as specified and directed.

Supply and fixed in repair 0.63mm plain, galvanised iron sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified & directed.

Material & labour for PCC coping 1:2:4 type B-1 (using 20 mm graded stone aggregate) at crumple joints (roof top) complete all as specified and directed.

M&L for 25mm thick pre-formed filler for expansion joints in crumple joints complete all as specified and directed by Engineer-in-charge.

Material & labour for 15mm thick cement plaster in cement mortar (1:3) over PCC coping in crumple, finished even and smooth without using extra cement complete all as specified

Material & labour for mild steel high yield strength TMT bars 10 mm dia and over cut to length bent to shape required, including cranking, hooking ends, bending and binding with and including MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

Material & labour for mild steel high yield strength TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, spacers, binders etc cut to length bent to shape required, including cranking, hooking ends, bending and binding with and including MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

Material & labour for RCC 1:2:4 (using 20mm graded aggregate) as in slabs supported on walls, beams and columns in floor, roof etc & like complete all as specified and directed.

Material & labour for bricks work as in half brick thick wall using sub class `B’ bricks straight or curved on plan to any radius built in cement mortar 1:4 exceeding 6m radius complete all as specified and directed.

M&L for expanded metal, not exc 4 kg/Sqm cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples and fixed to wood or steel members with nut and bolts or fixed to RCC work or ceiling surfaces complete all as specified and directed.

Excavation in post holes (or similar holes) in soft/loose soil, each n.exc 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm thick & removing the surplus spoil to a adistance not exc. 50m away from starting point complete all as specified and directed.

Dismantling structural steel work including doors, gates etc but excluding framed trusses complete all as specified and directed.

Supply and fix mild steel rolled section as in roof trusses (framed), trussed, purlins, crane grantries, rails and fastening and heavy brackets framing (Beam, tee, channel or flat section) includng distant pieces cleats etc conforming to Fe-410. Gde-E-250 including one shop coat of zinc chromate primer paint a (incl preparation of surface) before fabrication all as specified and directed.

Demolition of reinforced cement concrete in ground floor and paving n. exc. 15cm thickness (below or above ground level) complete all as specified and directed.

Material & labour for use and waste of formwork to soffits of suspended slabs /shelves/ chajjas etc. not exceeding 200mm thick (horizontal or slopping) & rough finished surfaces of concrete complete all as specified

Supply & fix rolled mild steel work for compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc. conforming to Fe 410-W Gde E-250 complete all as specified and directed.

Material & labour for PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) as in foundation filling, mass filling for posts/struts etc complete all as specified and directed.

Supply and fix in repair galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/metal frames glazed with putty or fixed with beads complete all as specified and directed.

Material & labour for preparation of old painted steel surfaces of any description, over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.

Fixing only 4mm thick asbestos fibre cement plain building boards fixed to frame work with screws as in flat ceiling complete all as specified and directed

Roughening old surface of concrete floors by picking, sweeping cleaning and washing down with water to clean the surface and brushing the neat cement slurry with 3 kg per Sqm and Material & labour for 18-20mm thick machine cut kota stone slab 550mmx550mm/600mmx600mm laid in floors, slabs and steps etc jointed with grey cement slurry mixed with pigments to match the shade of the slab including cutting, rubbuing and polishing over and including screed bed 15mm thick in cement mortar (1:6) complete all as specified and directed. Note - Kota stone for step shall be in single piece.

Material & labour for 18-20mm thick machine cut kota stone slab as in vertical surfaces such as dado/ skirting/pillars/risers of stair case etc jointed with grey cement slurry mixed with pigments to match the shade of the slab including cutting, rubbing and polishing over and including 10 mm thick in cement mortar (1:4) complete all as specified and directed. Note - Kota stone for risers of step shall be in single piece.

Taking down carefully existing point wiring of any type (i.e. wooden surface conduit casing capping or concealed conduit) complete for light or fan or socket or power etc on wooden batten or in conduit including fittings and accessories like switches, sockets, wooden board and making good disturbed portion to match with existing complete all as specified and directed.

Material & labour for concealed point wiring complete with single core 1.5 Sqmm (nominal area) PVC insulated and unsheathed cable 1100 volts multistranded, copper conductor cable (FRLS) drawn through and including PVC concealed conduit not less than 20mm dia bore medium grade (ISI marked) and accessories like bends, tees, junction boxes etc, fix on wall or ceiling surfaces all as specified including 1.5 sqmm , FRLS, copper multistranded cable as earth wire including sunken pressed steel terminal boxes and bakelite white/ coloured top sheet cover 3.0 mm thick , for One light point / fan point controlled by one way switch incl cutting chases in wall/surface any type of civil wk with making good to disturbed surfaces complete all as specified and directed.

All as per description of srl item No 87 here-in-before but socket out let 3 pin, 5 Amp on independent board with other switch complete all as specified and directed.

All as per description of srl item No 87 here-in-before but socket out let 3 pin, 5 Amp on same board with other switch complete all as specified and directed.

All as per description of srl item No 87 here in before but using 2.5 sqmm (nominal area) FRLS PVC insulated unsheathed multi stranded copper conductor single core cable drawn through in and including PVC rigid non metallic concealed conduit including with FRLS PVC insulated unsheathed multi stranded copper conductor single core cable 2.5 sqmm for continuous earth continuity conductor and connecting for earth dolly for 3 pin socket out let 15 Amps. complete all as specified and directed

S&F in replacement switch piano flush type 5 amps, 230 volts single pole one way complete all as specified and directed.

S&F in replacement socket outlet 5 amps, 5 pin flush type complete all as specified and directed.

S&F in replacement socket outlet 15 amps, 3 pin flush type complete all as specified and directed.

Supply and fix ceiling rose surface type bakelite 65 x 50 mm three terminal PVC / Polycarbonate isolated body complete all as specified.

Supply & fixing sub main wiring with two run of single core FRLS PVC insulated unsheathed multistranded copper conductor of size 4 sqmm in and including PVC rigid concealed conduit medium grade size not less than 25 mm dia including FRLS PVC accessories complete incl cutting and chasing and making good etc incl one run of 4 sqmm FRLS PVC insulated unsheathed multi stranded copper conductor cable to common earth and connected to earth dolly complete all as specified and directed. Note: Three runs of 4 sqmm S/C cable main & one run of FRLS PVC conduit 25 mm will be measured as one unit.

Supply and fix in replacement sheet metal enclosures for DB's with copper bus bar double door class IP-43 epoxy coated inside and outside 12 way SPN 230 volts complete all as specified and directed.

Supply and fix in replacement sheet metal enclosures for DB's with copper bus bar double door class IP-43 epoxy coated inside and outside 8 way SPN 230 volts complete all as specified and directed.

Supply and fix in replacement MCB SP 6 to 32 Amp, 240 volts,10 KA, C-curve complete all as specified and directed.

Supply and fix in replacement MCB SPN 20 to 32 Amp, 240 volts,10 KA, C-curve complete all as specified and directed.

Supply and fixing in replacement decco ultra slim square profile 20 watt LED lighting fixure with extruded polycarbonate body environmental friendly energy efficient, made of self ballasted LED batten with PC diffuser integral/ inbuilt electronic driver , beam angle > 120 degree wide light distribution and lumen output should be at least 1800 lumen with a CCT of 6000K, power factor should be greater than 0.9 with all accessories and connecting up complete with 3 core flexible cable white of size 23/0.0076 complete all as specified and directed. Make: Havells Cat Part No LHEXACP7UN1NW020 or equivalent makes as mentioned in group 1 of Appx 'B'

Supply and fix in replacement batten holder insulated body ISI marked complete all as specified and directed

Taking down and refixing ceiling fans of any make, any size and any type after painting of fans complete (as per previous colour) with synthetic enamel paint by spraying including filling cavities with filler after cleaning all dust etc including replacement of flexible wire, rubber reel, nuts, bolts complete all as specified and directed.

Supply and fix in repairs fan regulator, electronic type, five steps socket type single phase, including connection complete all as specified and directed.

Supply and fix in repairs energy saving & environmental friendly long life versalite pressure die-cast aluminium luminaire with high power 35 watt 5000K LEDs building security lights as light source and high efficiency electronic driver BIS approved having IP 65 protection (Min) 10 KV surge protection, power factor more than 0.95 complete pre-wired and product should be made in India including bracket made out of GI pipe 25mm dia bent to shape and clamp 40x6mm FI with nut bolts. complete all as specified and directed. Note (i) Contractor shall provide 2 years written manufacturer's warranty for the LED fixture complete including driver from the certified date of completion. (ii) Contractor shall produce LM-79 & LM-80 report of NABL accredited laboratory from manufaturer.

Material and labour for earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick burried directly in ground (not less than 2.25 mtr deep below ground level) with top edge of theplate not less 1.5 mtr deep below normal ground level connected to GI earth wire 4 mm dia connected to earth plate by means of nut, bolts, check nut & washer of galvanized iron or of steel, GI earth wire will be protected by 15 mm dia GI pipe 'light grade', watering pipe 20 mm dia GI 'light grade', GI wire meshed funnel, alternate layer of char coal and salt on all side to earth plate upto thickness of 150 mm, filling of black cotton soil in earth pit upto ground level, PCC chamber recessed for and including RCC cover with handle including all necessary excavation & earth work, earth wire connected to O/H continuous earth wire on pole, testing the earthing after completion complete all as specified and directed. Note :- (I) Earth pit shall be constructed 50cm from the side of excavation to avoid sinking of pit (II) PCC chamber shall be (1:3:6) using 20mm graded stone aggregate and 50mm thick RCC (1:2:4) type B-1 cover slab reinforced with 8mm dia TMT steel bars @ 100mm c/c both ways complete all as specified and directed. .

Supply and fix in replacement DB's 4 way vertical TPN double door with bus bar rated 200 Amps, including MCCB as incomer, 100 Amps 4 pole 415 volts with capacity 16 KA and MCB SP 6-32 amps 10 KA in outgoing circuit complete pre-fitted with neutral bar and earth bar and prewired complete with PVC insulated FRLS copper conductor wire of suitable size, complete all as specified and directed.

Supply & fixing in replacement sub main wiring with two single core FRLS PVC insulated unsheathed multistranded copper conductor of size 6 sqmm in and including PVC concealed conduit medium grade size not less than 25 mm dia including PVC accessories complete incl cutting chasing and making good disturbed surface etc incl one run of 6 sqmm FRLS PVC insulated unsheathed multistranded copper conductor cable to common earth and connected to earth dolly completed all as specified and directed. Note: Three runs of 6 sqmm FRLS PVC insulated stranded copper conductor S/C cable & one run of PVC conduit 25mm will be measured as one unit.

Supply and fixing in replacement sub main wiring with two runs of single core FRLS PVC insulated cable with copper conductor stranded and sheathed of size 10 sqmm, two runs in and including PVC concealed conduit medium grade of size not less than 25mm dia including PVC accessories complete incl cutting and chasing and making good etc incl one run of 10 sqmm FRLS PVC insulated unsheathed multi stranded copper conductor cable to common earth and connected to earth dolly complete all as specified and directed. Note : Three runs of 10 sqmm PVC insulated stranded copper conductor S/C cable & one run of PVC conduit 25mm will be measured as one unit.

Supply and laying PVC sheathed heavy duty electric LT cable XLPE insulated armoured and with aluminium conductor 1100 volt grade 10 sqmm 2 core laid in trenches in floor, in ducts, through pipe or fixed along the pole including taking out of old cables any size, any type complete all as specified and directed. Note:- 1. Excavation, earth work, sand cushioning, and brick protection shall be measured and paid for separately. 2. Rate of necessary lugs, thimbles and jointing material shall be included in unit rate.

Supply and laying PVC sheathed heavy duty electric LT cable XLPE insulated armoured with aluminium conductor 1100 volt grade 25 sqmm 4 core laid in trenches in floor, in ducts, through pipe or fixed along the pole including taking out of old cables complete all as specified and directed. Note:- 1. Excavation, earth work, sand cushioning, and brick protection shall be measured and paid for separately. 2. Rate of necessary lugs, thimbles and jointing material shall be included in unit rate.

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc for laying of cable getting out in soft/loose soil complete all as specified and directed.

Returning filling in including spreading,levelling,watering, well ramming in layers not exc 25 cm each complete all as specified and directed.

Removal of surplus soil to a distance not exc 50 m and deposited where directed at a level not exc 1.5m above the starting point complete all as specified and directed.

Supply and spread river sand in trenches as cable cushioning 8 cm below the cables and 15 cm above the cables all as directed and directed Note : Punned down thickness of 18cm shall be measured.

M&L for brick protection using old size sub class 'B' bricks, laid flat dry but adjoining to each other laid length wise perpendicular to the axis of cable complete all as directed and directed

Supply and lay GI tubing light , grade 40mm bore with all necessary fittings laid in trenches under road crossing in floors complete all as specified and directed.

KULDEEP SINGH

NATIONAL BUILDERS

SARASWATI CONSTRUCTION CO

M/S Kuldip Construction Co.

nitin trading company

yash paul gupta