Creation of 63 KVA Sub Station at Dilawar Colony 2 Mujgund to fed by feeder no. 4 Receiving Station Shalteng pertaining to ESD Zainakote, ED 3rd (Partial Turnkey Basis)

Amount

Creation of 63 KVA Sub Station at Dilawar Colony 2 Mujgund to fed by feeder no. 4 Receiving Station Shalteng pertaining to ESD Zainakote, ED 3rd (Partial Turnkey Basis)

Installation, Testing & Commissioning of 63 KVA,11/0.433,3 phase Distribution Transformers with Bimetallic Terminal Connectors Energy efficient Level-2, (Al. wound) ONAN, Filled with T.Oil as per IS 1180 Part-I of 2014 (including providing of SL Clamps, Jumpers including integration with system) including Transportation, Loading & unloading from Divsional Store to site.(DT to be provided Departmentally)

Supply, installation, testing and commissioning including transportation, loading and unloading of Gapless Surge Arrestor, 9 kV, 10 kA, Lighting Arrestor Set Heavy duty with Polymer Housing, Station type conforming to IEC-99-4 Capable of withstanding Maximum continuous operating voltages (M.C.O.V)

Supply, installation, testing and commissioning including transportation, loading and unloading of 11KV 200 Amperes, Triple pole switches Gang Operated (G.O. Set) conforming: IS-2544, IS: 5340 (Part-III) and SS: 9921 (Part-I -V)

Supply, installation, testing and commissioning including transportation, loading and unloading of 11 KV Horn, Gap (fuse 3-phase 200A) as per Relevant IS.

Supply, installation, testing and commissioning including transportation, loading and unloading of 185mm² (1 Ckt) Single Phase Cable,1.1K V Grade, PVC Insulated Stranded Conductor FRLS type including lugs/Clamps.

Supply, Installation, Testing & Commissioning including digging/excavation up 1.5 meter deep for planting of S.T. poles 9.0 Meter long swaged Type conforming to ST 410 SP-33, IS: 2713 amended up-to date well finished and coated with black bituminous paint upto plant depth and Red-Oxide coated above ground level with earthing arrangement through bolt welded on pole of 14mm diameter, provided at height of 300 mm above the planting depth which should be 1.5ms (SP 33). Top plate 3mm thick fully welded & bottom plate 35cm*35cm, 5mm thick fully welded.

Supply, fabrication and fixing including Transportation, loading Unloading of of G.I Channel Iron / Angle Iron /Flat/F-tops of sizes including clamps/Collars 50 x 6 mm

Supply and fixing of GI Nuts and Bolts full thread of sizes Galvanized as per IS

Supply, Installation, Testing & Commissioning of Earthing of Substation-Excavation of earth pit of dia 650mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as per IS 1239. GI strip for neutral earthing of size 75mm*10mm & 50mm*6mm for connection of transformer body, G.O Set & lightening Arrestor (Including Baby Insulators, if required) as per IS 2629/85, GI nuts & bolts, refilled with earth enhancement materials & earth chamber made of brick masonry with RCC slab cover.

Supply, Installation, Testing and Commissioning of including Transportation, loading Unloading of 11kV Polymeric composite Pin Insulator 12kV, 5kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm

Supply, Installation/fixing including Transportation, loading Unloading of Anti-Climbing Device with Clamps

Supply and Painting of poles with one coat of Red oxide Primer and two coats of Aluminium Paint

Supply and fixing of PG Clamps/wedge Connector

Providing of material & Laying of Cement bottoming 1:2:4 mix as per REC standards 0.5 cum/pole

Supply, Laying, stringing/Installation, testing and commissioning of 50 sqmm ACSR Conductor as per IS.

Supply, installation, testing & commissioning of LT Distribution Box for 63 kVA DTR with MCCB for incomer & SFU's for Outgoing Circuits

Supply, Installation, Testing & Commissioning including digging/excavation up 1.5 meter deep for planting of S.T. poles 8 Mtr. Long Pole ST-410 SP15 , IS: 2713 amended up-to date well finished and coated with black bituminous paint upto plant depth and Red-Oxide coated above ground level with earthing arrangement through bolt welded on pole of 14mm diameter, provided at height of 300mm above the planting depth which should be 1.5 ms (SP 15).Top plate 3 mm thick fully welded & bottom plate 35cm*35cm, 5mm thick fully welded.

Supply, fixing, testing and commissioning of 16KN Polymer Shackle including GI U-Clamp for Shackle insulators

Supply of material and carrying Earthing Complete of ST Pole by GI Pipe 40 mm or GI Rod 20mm 2.5 mtr long through GI Strip.

Providing of material & Laying of Cement bottoming 1:2:4 mix as per REC standards 0.45 cum/pole

Supply and fixing of GI Wire 6 SWG & 8 SWG

M/S BUDOO ELECTRICALS AND SUPPLIERS

KHAN AND CO