CWE/GGN/GT-24/2025-26 SPECIAL REPAIR TO BOUNDARY WALL AT AFS ARJANGARH UNDER GE (AF) GURGAON

Amount

Demolition of brick work or rubbled stone masonry including all quoins arches , pillars etc built in cement mortar and including removal from the site complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and including removal of debris and rubbish from the site complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks old size straight or curved on plan exc 6.0 m mean radius built in cement mortar (1:6) complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks (except bricks) old size straight or curved on plan exc 6.0 m mean radius built in cement mortar (1:4) complete all as specified and directed.

M&L for 15 mm thick plastering in two layers (10+5) mm in cement mortar (1:4) on brick or concrete surfaces including rendering on fins, fascias, chajja, parapets etc and finishing the surfaces even and fair (without using extra cement), top layer shall be with WPC as per manufacturer's instruction and complete all as specified and directed. Note: WPC shall be measured and paid separately.

M&L Preparing of new surface of wall and applying two coats of exterior emulsion paint (Camouflage pattern)over a coat primer on walls complete all as specified and directed by Engineer-in-charge. complete all as specified and directed.

Supply only integral water proofing compound ISI Marked complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description complete all as specified and directed.

Taking down barbed wire fencing of any description and in any position fixed to RCC/steel posts complete all as specified and directed. Note : Each row shall be measured separately.

S&F Mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes for notching of wire, etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Complete all as per item No.10 here-in-before but fixing only complete all as specified and directed.

S&F in repair re-inforced punched concertina coil of 600 mm dia in stressed position hot dip galvanized steel wire coated with CLR anti corrosive paints making diamond shape with the help of drove tail clips (18 SWG ) , the concertina coil is to be fixed with barbed wire at points where coil touched the bottom barbed wire with the help of lug rings(24 SWG ) including all fittings like fasteners clips , steel lug rings etc complete all as shown in drg complete all as specified and directed.

S&F galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc complete all as specified and directed. Note : Each line wire to be measured.

M&L for prepration of new Steel surfaces of any description, not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

M & L Cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregates as in benching for manholes, bands, coping, bed plate and for embedding rungs etc. with slightly chamfered or rounded angles including necessary form work, if any, and finishing exposed surface even and smooth without using extra cement complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings etc complete all as specified and directed.

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified etc complete all as specified and directed.

Fixing only sheeting (any thickness) Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified etc complete all as specified and directed.

M&L Preparing of new surface of wall and applying two coats of exterior emulsion paint over a coat primer on walls complete all as specified and directed.

M&L Preparing of old painted surfaces of steel of any description and girth, not otherwise described and treated with one coat of synthetic enamel paint complete all as specified and directed.

M&L for 100 mm thick cement concrete type D-2 1:4:8 with ) using 40 mm graded stone aggregates) as in sub base of flooring etc complete all as specified and directed.

Providing and laying 60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved , design & pattern as in footpath , parks , lawns,drive ways or light traffic parking etc. of required strength , thickness & size/shape, made by table vibratory method using PU mould , laid in required colour & pattern over and including 25mm thick compacted bed of fine sand , compacting and proper embedding/laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator,filling joints with sand andcutting of paver block as per required size and pattern,finishing and sweeping extra sand complete all as specified and directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line , level and curvature,jointed withcement mortar 1:3 (1 cement : 3 coarse sand ) , including making joints with or without grooves ( thickness of joints except at sharp curve shall not to more than 5 mm) , including making drainage opening whereever required complete all as specified and directed.

M&L Preparing of new concrete surfaces and applying two coats of synthetic enamel paint over priming paint plaster coat complete all as specified and directed.

Net Contract Sum will be after deducting Sch of Credit of Rs 4,18,040.00

M/S Rohit Enterprises (BID ID -3450985)

Phogat Builders (BID ID -3445127)

Parveen Builders (BID ID -3444799)

M/s GANJOO AND CO (BID ID -3445075)