Loading
Loading…
Loading…
Tender Value
₹22.9 L
EMD Value
₹45,800
Closing Date
14 Apr 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
TENDER
62 conditions · 10 needing a document upload
All Optional documents to be submitted before signing of Contract Agreement/or at the time of submission of Bid
List of documents which are to be submitted by the tenderer along with their offer failing which the tender shall be summarily rejected.
If Bid Security is submitted through mode of Bank Guarantee then submission of scanned copy of the Bank Guarantee towards Bid Security of the bid on e-tendering portal (IREPS) and original of above Bank Guarantee before closing date of submission of bids (i.e. excluding the last date of submission of bids) as per Para-5 of Instructions to Tenderers (ITT) in Chapter- 2 and Para-6, Annexure-I in Chapter-2 of Annexed Document.
Technical Eligibility Criteria as per Para 10.1 & Para 17.15.1 of Chapter-2
Financial Eligibility Criteria as per Para 10.2 & 17.15.2 of Chapter-2 along with Certificate issued from Chartered Accountant.
Bid Capacity as per Para 10.3 & 17.15.3 duly filled up Annexure- G, Chapter-7 of Annexed Document.
Certificate as per the proforma enclosed vide Annexure-A and an additional certificate in case of other than Company/Proprietary firm, Annexure-A-1 shall also be submitted by the each member of a Partnership Firm/ Joint Venture (JV)/ Hindu Undivided Family (HUF)/ Limited Liability Partnership (LLP) etc. as the case may be as per Annexure-A1 vide Chapter-7 of the Annexed Document.
Power of attorney duly notarized and in favour of a single individual should be submitted. As per Para 14,15, 17 & 18 of SGCC.
List of important documents which are to be submitted by the tenderer along with their offer.
Certificate of familiarization to the work site as per Chapter-6 of the Annexed Document.
Certificates regarding contractual payments received, along with duly filled up Annexure-B, Chapter-7 of Annexed Document, to this effect which may be an attested Certificate from the concerned department/client or Audited Balance Sheet duly certified by the Chartered Accountant duly supported by Audited Balance Sheet.
List of Plant & Machinery available on hand and proposed to be inducted and hired for the tendered work as per the format vide Annexure-D, Chapter-7 of Annexed Document.
List of personnel/organization on hand and proposed to be engaged for the tendered work as per the format vide Annexure- E, Chapter-7 of the Annexed Document.
Details of works completed/substantially completed during previous 07 years ending last day of month previous to the one in which tender has been invited as per the format vide Annexure-F, Chapter-7 of the Annexed Document.
All documents reflected as Mandatory in the Commercial Compliance are to be submitted other wise the offer is liable to be rejected.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Please submit the Certificate of familiarization to the work site as per Chapter-6 of the Annexed Document.
Please submit copy of Certificate as per the proforma enclosed vide Annexure-A, Chapter-7 of the Annexed Document. An additional certificate in case of other than Company/Proprietary firm, Annexure-A-1 shall also be submitted by the each member of a Partnership Firm/ Joint Venture (JV)/ Hindu Undivided Family (HUF)/ Limited Liability Partnership (LLP) etc. as the case may be. Non-submission of the Certificates by the bidder shall result in summarily rejection of his/their bid. It shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self attested by which they/he is qualifying the Qualifying Criteria mentioned in the Tender Document.
Please submit details of the constitution of Firm i.e. Proprietary Firm/Partnership Fm/HUF/JV/Company Registered under Companies Act-2013/Limited Liability Partnership/Registered Society & Registered Trust etc along with signed Annexure-C, Chapter-7 of the Annexed Document. And also submit the following mandatory supporting documents such as copies of Partnership Deed, Power of Attorney, Memorandum of Articles, Articles of Association, Authorisation, Certificate of Incorporation, Certificate of Registration, Deed of Formation, Memorandum of Understanding, JV Agreement etc as applicable under Para 14, 15, 17 & 18 of Annexure-I, Chapter-2 of Annexed Document. Important Note:-(a)The Power of Attorney duly Notarized shall be submitted even if such specific person is authorized for above purpose through Partnership Deed/Memorandum of Understanding/Article of Association or such other document. (b) In case one or more of the members of JV is/are partnership firm(s)/ Proprietary Firm/ HUF/ Companies/ LLP Firm(s)/ Society(s)/ Trust(s), the required documents of each individual member of JV shall be submitted along with the documents to be submitted on behalf of the JV. (c) Non-submission of above documents (except PAN Card & Undertaking regarding not blacklisted/debarred from participation of tenders/contracts) or submission of incomplete documents shall lead to summarily rejection of the offer.
Please submit copy of the PAN Card.
Please submit list of Plant & Machinery available on hand and proposed to be inducted and hired for the tendered work as per the format vide Annexure-D, Chapter-7 of Annexed Document. Non-compliance with this condition liable to result in the tender being rejected.
Please submit list of personnel/organization on hand and proposed to be engaged for the tendered work as per the format vide Annexure-E, Chapter-7 of the Annexed Document. Non- compliance with this condition liable to result in the tender being rejected.
Please submit details of works successfully completed or substantially completed during last 07 years ending last day of month previous to the one in which tender has been invited as per the format vide Annexure-F, Chapter-7 of the Annexed Document. Non-compliance with this condition is liable to result in the tender being rejected.
The tenderer(s) are required to upload the information as per Annexure-G of Chapter-7, Annexed Document duly signed by the tenderer(s) and verified by Chartered Accountant since the information is required to evaluate the bid capacity of the tenderer(s) for tenders valuing more than Rs. 20 Cr. However, the tenderer(s) may submit any additional information, if they desire so. In case, the tenderer(s) failed to submit the minimum required information as per Annexure-G of Chapter- 7 along with the offer or submit in any other format omitting required information essential to work out Bid capacity, his/their offer shall be rejected summarily. This information is to be based on Annexure-B & Annexure-G1, Chapter-7 of Annexed Document.
Please submit the required information for evaluation of Bid Capacity as per Annexure-G1, Chapter-7 of the Annexed Document.
Please submit the information regarding association of Railway Officers with tenderer(s) in reference to Clause 16, Chapter-2 of Annexed Document along with the declaration as per the format vide Annexure-H, Chapter-7 of the Annexed Document. Also non-submission of information required as per Clause 16 (a), (b) & (c) of Chapter-2 in Annexed Document, contract is liable to be dealt in accordance with provision of Clause 43 of Chapter-3 (Clause 62 of General Conditions of Contract).
Please submit list of court cases as per the format vide Annexure-I, Chapter-7 of the Annexed Document.
Please submit list of arbitration cases as per the format vide Annexure-J, Chapter-7 of the Annexed Document.
Please submit broad plan of execution of work as per the format vide Annexure-K, Chapter-7 of the Annexed Document.
Please submit details of other credentials/facilities as per the format vide Annexure-N, Chapter-7 of the Annexed Document.
Please submit your bank details i.e. Name of Bank along with Bank Branch Code, Accounts Number as appearing in the cheque book, IFSC Code and PAN Number, duly certified by the authorised official of the bank, to facilitate payment through ECS/NEFT/RTGS as per Annexure-O of Chapter-7 of Annexed Document. In lieu of Bank Certificate, scanned copy of a cancelled cheque may be attached for verification of the above particulars
If Bid Security is submitted through mode of Bank Guarantee then please upload scanned copy of the Bank Guarantee (as per Specimen Format at Annexure-Q, Chapter-7 of Annexed Document) submitted towards Bid Security original of which should be delivered in person to the official nominated as indicated in the tender document before closing date of submission of bids.(That is excluding the last date of submission of bids). Non submission of scanned copy of Bank Guarantee with the bid on e-tendering portal (IREPS) and/or non submission of original Bank Guarantee within above specified period shall lead to summary rejection of bid. In case of the Bid Security deposited through e- payment gateway, then the same should be confirmed by the tenderer.
Please submit the option for taking payment through Letter of Credit (LC) arrangement for tenders having advertised cost of Rs. 10 lakhs and above. For details refer Clause-7, Chapter- 4 of Annexed Document.
Please submit the required certificate (duly certified by a Cost Accountant /CA)as per Clause 8.9(b), Chapter-4 of Annexed Document.
Please submit the Tender Form i.e. Annexure-I of Chapter-2 of Annexed Document.
Electrification of Goomties, FOB in connection with new coaching complex line between Mancheswar - Bhubaneswar new Station in KUR Division of East Coast Railway.
ETELCONBBST-380ER
ETELCONBBST-380ER
Open
Works - General
6 Months
Khordha, Odisha
₹0
₹45,800
14 Apr 2026
16 Mar 2026
31 Mar 2026
113 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 22,90,728.3 | ||
| — | 480.00 | — | — | ||
| Supply and laying of 25mm outer dia (medium) PVC conduit pipe. | — | — | — | 32,188.8 | |
| — | 40.00 | — | — | ||
| Supply and laying of 32mm outer dia (medium) PVC conduit pipe. | — | — | — | 3,986.8 | |
| — | 56.00 | — | — | ||
| Supply and fixing of PVC circular box/RJ box /square junction box on wall/roof/truss. | — | — | — | 2,452.8 | |
| — | 8.00 | — | — | ||
| Supply & Erection of Fan Hook cylindrical box in the roof at the time of casting. | — | — | — | 437.2 | |
| — | 8.00 | — | — | ||
| Supply of BLDC ceiling fan of 1400mm sweep with down rod as per latest BIS. | — | — | — | 47,720 | |
| — | 8.00 | — | — | ||
| Supply & fixing of modular electronic stepped regulator on control board. | — | — | — | 3,231.44 | |
| — | 8.00 | — | — | ||
| Erection of ceiling fan/wall mounting fan including connection. | — | — | — | 165.68 | |
| — | 6.00 | — | — | ||
| Supply of exhaust fans 300mm sweep, 1400 RPM with louvers shutter. | — | — | — | 15,965.04 | |
| — | 6.00 | — | — | ||
| Erection of exhaust fan by groove cutting, louver's shutter fixing including connection. | — | — | — | 1,323 | |
| — | 58.00 | — | — | ||
| Supply & fixing of Ceiling rose. | — | — | — | 790.54 | |
| — | 52.00 | — | — | ||
| Supply of 20watt,4ft LED Tube Light Fittings Complete With Batten, With Polycarbonate Housing And Integrated Electronic Driver And All Accessories. | — | — | — | 64,484.68 | |
| — | 52.00 | — | — | ||
| Erection of Bracket light/ TFL/CFL /LED fitting including connection. | — | — | — | 2,503.8 | |
| — | 24.00 | — | — | ||
| Concealed/surface wiring with (2x6+1x2.5sqmm) copper wire 1100 volt grade (without pipe laying) on truss/roof/wall/ structure. | — | — | — | 4,253.52 | |
| — | 96.00 | — | — | ||
| Concealed/surface wiring with (2x4+1x1.5 sqmm) copper wire 1100volt grade (without pipe laying) on truss/roof/wall/ structure. | — | — | — | 10,632 | |
| — | 360.00 | — | — | ||
| Concealed/surface wiring with (2x2.5+1x1.0 sqmm) copper wire 1100 volt grade (without pipe laying) on truss/roof/wall/ structure. | — | — | — | 26,269.2 | |
| — | 32.00 | — | — | ||
| Concealed/surface wiring with (2x1.5+1x1.0 sqmm) copper wire 1100 volt grade (without pipe laying) on truss/roof/wall/ structure. | — | — | — | 1,630.72 | |
| — | 6.00 | — | — | ||
| Supply and erection of 32A/40A, DP MCB 10KA C series with metal enclosure. | — | — | — | 4,449.78 | |
| — | 16.00 | — | — | ||
| Supply of LED street light luminaire 70 watt with all accessories. | — | — | — | 63,200 | |
| — | 16.00 | — | — | ||
| Erection testing and commissioning of Street light fitting in SST/GRP /GI octagonal pole/structure/bldg. | — | — | — | 2,938.72 | |
| — | 9.60 | — | — | ||
| Supply & fixing of 40mm inner dia GI pipe(medium grade) duly bend(1.2Mtr long each). | — | — | — | 3,611.23 | |
| — | 8.00 | — | — | ||
| Earthing. | — | — | — | 19,731.6 | |
| — | 120.00 | — | — | ||
| Supply & fixing of GI flat 50x6/25x6/25x5mm. | — | — | — | 4,954.8 | |
| — | 66.00 | — | — | ||
| Modular point wiring (without supply and laying of pipe) with (2x 1.5) Sq.mm 1100V grade PVC insulated flexible copper conductor cable (for phase and neutral) and (1x1) sq.mm 1100V grade PVC insulated flexible copper conductor cable (for earth) in the concealed/ surface PVC conduit pipe/casing & caping with 10A flush modular type switch, supply of 10A flush modular type switch for one way switch as per approved list) where ever required, ceiling rose and modular type plate cover to MS switch control box . The price excludes supply & laying of PVC conduit pipe/casing & caping. | — | — | — | 31,840.38 | |
| — | 10.00 | — | — | ||
| Modular wiring on board 10A plug point 250 volts including testing and commissioning. The wiring shall be done with (2x2.5) Sq.mm 1100V grade PVC insulated FRLS flexible copper conductor cable (for phase and neutral) and (1x1) sq.mm 1100V grade PVC insulated FRLS flexible copper conductor cable of green colour (for earth). The control switch 10A Fire retardant modular type as per approved list and 10A 5 pin socket as per approved list) to be fixed on common anodized MS switch board including labour charges etc. | — | — | — | 4,745.5 | |
| — | 2.00 | — | — | ||
| Concealed/surface wiring (without supply and laying of pipe) for separate plug point 10A 250V modular type long run with (2x2.5 )Sq.mm1100V grade PVC insulated flexible copper conductor cable (for phase and neutral ) and (1 x 1) sq.mm1100V grade PVC insulated flexible copper conductor cable(for earth)with supply of Modular Switch 10A,250V AC (mylinc) as per approve list, 5 pin Modular Socket 10A,250V AC as per approved list on 3way module metal box and 3way module plate. The price excludes supply &laying of PVC conduit pipe/casing &caping. | — | — | — | 1,848.28 | |
| — | 8.00 | — | — | ||
| Concealed/surface wiring (without supply and laying of pipe) for separate plug point 20A 250V modular type with (2x4)Sq.mm1100V grade PVC insulated flexible copper conductor cable (for phase and neutral ) and (1 x 1.5) sq.mm1100V grade PVC insulated flexible copper conductor cable(for earth)with supply & fixing of 20A Modular Switch,5pin modular socket on 4 Module Metal flush box ,modular plate 4 module .The price includes supply & fixing of 20 A one way switch of as per approved list and 10A/20A socket as per approved list) .The price excludes supply & laying of PVC conduit pipe/casing & caping. | — | — | — | 10,095.76 | |
| — | 4.00 | — | — | ||
| Supply and erection of Power units complete with 4 module plate, 20 Amps starter, 25Amps socket and 25 Amps Plug, on 4 module box. For AC Point. | — | — | — | 3,140.28 | |
| — | 4.00 | — | — | ||
| Supply & fixing of 3Nos 10A 250V modular sockets controlled by 1No.20A 250V switch on board including connection. | — | — | — | 1,040.72 | |
| — | 2.00 | — | — | ||
| Supply & installation of precision ACs of 2TR capacity with high performance split type cooling units suitable for critical technology/equipment room. | — | — | — | 7,37,051.04 | |
| — | 2.00 | — | — | ||
| Supply & erection of 5/7.5 KVA single phase A.C Voltage stabilizer. | — | — | — | 7,812.42 | |
| — | 4.00 | — | — | ||
| Supply, fixing, connecting & commissioning of 8 way SPN DB (double door)with I/C 1x32 A MCB DP, 10KA C series, O/G 10x6A/10A/20A MCB SP 10KA C series. | — | — | — | 12,341.68 | |
| — | 2.00 | — | — | ||
| Supply, erection, testing and commissioning of 6way distribution box (acrylic window)with I/C:1x32A MCB DP,10KA C series, O/G:10x16A MCB SP 10KA C series. | — | — | — | 5,582.68 | |
| — | 4.00 | — | — | ||
| Supply and erection of indoor type single phase Junction box (size-400x300x200mm) with copper bus bar 100A capacity with 1x40A MCB DP 10KA C series as incoming. | — | — | — | 8,248.24 | |
| — | 1616.00 | — | — | ||
| Laying of Railway supplied LT XLPE Single cable laying along the road/track of different sizes. | — | — | — | 5,80,354.08 | |
| — | 260.00 | — | — | ||
| Laying of Railway supplied LT XLPE Double cable laying along the road/track of different sizes. | — | — | — | 1,52,656.4 | |
| — | 376.00 | — | — | ||
| Laying of Railway supplied LT XLPE cable across the road through 150 mm dia concrete pipe of different sizes. | — | — | — | 2,08,360.4 | |
| — | 218.00 | — | — | ||
| Laying of Railway supplied LT XLPE of different sizes in the air/culvert. | — | — | — | 6,184.66 | |
| — | 60.00 | — | — | ||
| Cable laying through G.I.pipe 50/65 Dia/PVC pipe (without supply of PVC/GI pipe) / PVC pipe (Railway supplied) | — | — | — | 1,524 | |
| — | 74.00 | — | — | ||
| Along the concrete floor/black top road by cutting floor/black top road through G.I pipe(without supply of GI pipe) | — | — | — | 5,353.9 | |
| — | 42.00 | — | — | ||
| Supply and fixing of 50mm inner dia (medium grade) G.I pipe | — | — | — | 13,853.28 | |
| — | 18.00 | — | — | ||
| Supply & fixing of GI pipe 65 mm dia (Medium). | — | — | — | 11,242.62 | |
| — | 16.00 | — | — | ||
| Cable Route Marker | — | — | — | 711.52 | |
| — | 8.00 | — | — | ||
| Supply of GI octagonal pole 6m long single arm with inbuilt junction box and foundation accessories. | — | — | — | 1,03,169.68 | |
| — | 5.12 | — | — | ||
| Foundation materials : Digging of pit, casting of foundation 1Mx1Mx1.5M,1MX1MX2M, 0.8MX0.8MX1M with stone ballast of size 40mm. and down for erection of R.S.joist/GI octagonal pole/SST pole with supply of cement, mortar and sand with ratio 1:3:6 and 12mm. thick cement plastering. | — | — | — | 20,915.15 | |
| — | 8.00 | — | — | ||
| Erection of RS Joist/GI Joist /GI octagonal pole/SST pole./WPB pole/PSC pole etc. | — | — | — | 1,295.84 | |
| — | 24.00 | — | — | ||
| Earthing of support (Coil type) | — | — | — | 5,038.56 | |
| — | 2.00 | — | — | ||
| Preparation of details wiring diagram, power supply diagram and as erected drawings for station building/Goomty/running room. (Per Unit= Per Bldg) | — | — | — | 3,941.08 | |
| — | 4.00 | — | — | ||
| Supply, fixing, connecting & commissioning of 4 way SPN DB with 4x20A MCB SP 10KA. | — | — | — | 10,053.08 | |
| — | 2.00 | — | — | ||
| Supply & fixing of 63A Manual changeover switch with cover. | — | — | — | 21,405.2 | |
| — | 4.00 | — | — | ||
| Dismantling of SST pole/RS joist./GI Joist/PSC pole and return to consignee's store. | — | — | — | 1,390.8 | |
| — | 4.00 | — | — | ||
| Dismantling of CLS panel/wall transportation of the same to consignee's store | — | — | — | 339.28 | |
| — | — | — | feeder | ||
| — | — | — | panel | ||
| — | 60.00 | — | — | ||
| Dismantling of LT cable and transportation of the same to consignee's store. | — | — | — | 1,441.8 | |
| — | 8.00 | — | — | ||
| Dismantling of TFL/CFL/LED fittings and transportation of the same to consignee's store. | — | — | — | 167.2 | |
| — | 8.00 | — | — | ||
| Dismantling of celling fans/exhaust fans and transportation of the same to consignee's store. | — | — | — | 167.2 | |
| — | 16.00 | — | — | ||
| Dismantling of streetlight fitting and transportation of the same to consignee's store. | — | — | — | 494.24 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Tender document
ATTACHMENT
T-380ERAnnexedDocument.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .