BIRED/105/e-NIQ (1st call) of 2024-2025

Amount

SUB-HEAD 1-PVC Rigid Conduit-WIRE LAYING. Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make] of following sizes on wall, ceiling with saddles and other accessories as required and mending good damages to building works. 20 mm size [ 7(a)/ E- 16 ]

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required. i) 3 x(1.5 sqmm) [ 1(b) /E- 9]

ii) 2x(2.5sqmm) + 1x(1.5sqmm) as ECC [ 1(s) /E- 9]

iii) 2x(4 sqmm)+1x(2.5 sqmm) [ 1(v) /E- 9]

iv) 2x(6 sqmm)+1x(4 sqmm) [ 1(y) /E- 9]

Supplying & Fixing solderless Copper socket by crimping of Copper wires. a)1.5 sq mm

b) 2.5 sq mm [9(i) / F-5]

c) 4 sq mm [9(ii) / F-5]

d) 6 sq mm [9(iii) / F-5]

Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (CCurve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. [17/E-19]

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc. [ 5(a) / E-17]

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug top with indicator (Brand approved by EIC) & necy. Connections. [5(b) / E-17]

SUB-HEAD 2--VTPNDB, HTPNDB, SPNDB, S.F.U,Bus-Bar etc. Supplying and fixing double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall as per GS as per direction of EIC. 8 Way ( Up to 160 A ) Make - Seimens, Enclosure (607914) /Siemens/Schneider/L&T,Enclosure or equivalent cat of SIEMENS as approved by E.I.C] [15 / D- 11 ]

4 Way ( Up to 160 A ) Make - Seimens, Enclosure (607914) /Siemens/Schneider/L&T,Enclosure or equivalent cat of SIEMENS as approved by E.I.C] [15 / D- 11 ]

Supplying and fixing double-door Horizontal TPN MCB Distribution Board with IP-42/43 protection, concealed in wall as per GS. i) 4 Way[ Legrand ] [ 14 / D- 10 ]

ii) 6 Way[ Legrand ] [ 14 / D- 10 ]

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall as per GS. i) 2+8 Way[ Legrand ] [ 13 / D- 9 ]

ii) 2+12 Way[ Legrand ] [ 13 / D- 9 ]

Supplying and fixing 415 V Four Pole MCCB of Breaking capacity 25kA/35kA in existing Vertical DBs including necessary connection as per GS [ Make - Legrand / Schneider/L&T/Siemens) as per direction of EIC] i) 125 A [10/ D- 8 ]

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection as perGS [Make-Legrand/ Schneider/Siemens/ Crabtree/ L&T) as per direction of EIC. ] i) 63 A FP [ 6 / D- 5 ]

ii) 40 A DP [ 6 / D- 5 ]

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connectionas per GS (Make-Legrand/ Schneider/Siemens/Crabtree/L&T) as per direction of EIC. i) 6-32 SP [ 7 / D- 6]

ii) 32 A TP [ 7 / D- 6]

iii) 63 A TP [ 7 / D- 6 ]

Supplying and fixing double door sheet steel (16SWG), powder coated cable end box for TPN DB horizontal / vertical / SPNDB enclosure with IP-42/43 as per GS. 4/6/8/12 Way (Vertical/horizontal ) [16/D-12]

Supplying and fixing 415V, TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. [Make- L&T] i) 200 A [4(a)/D-3]

ii) 125A [4(a)/D-3]

iii) 63A [4(a)/D-3]

Supplying and fixing sheet steel (16SWG) cable end box on TPN SFU enclosure with nuts bolts etc incl. powder coated painting. 200/250A [ 5 / D- 5 ]

Supplying & fixing sheet metal (16 SWG) Iron Clad Busbar chambers on angle iron frame on wall, incl. earthing attachment and painting as required – ( As per Drawing no. 470 of PWD Specification Book – May 1991). 4 BARS Dimension of Cu. bars 4 x 20x5mm & Dimension of Sheet Metal Box 500x150mm. 315A [ 4 / D- 13 ]

Installation and fixing of existing Panel on base frame duly made by MS angle iron structure including shifting of the same panel from present location to desired location as per direction of EIC.

SUB-HEAD 3:- CABLES LAYING Supply & delivary of 1.1KV grade 4 core 70 sq. mm. multy stranded alluminium conductor Armoured cable. -[Make- Gloster/ Havells / Polycab/ KEI / As per choice of EIC]. [2 Nos VTPNDB for Old Building]

Supply & delivary of 1.1KV grade 4 core 50 sq. mm. multy stranded alluminium conductor Armoured cable. -[Make- Gloster/ Havells / Polycab/ KEI / As per choice of EIC]. [4 Nos VTPNDB for Old Building]

Supply & delivary of 1.1KV grade 4 core 25 sq. mm. multy stranded alluminium conductor Armoured cable. -[Make- Gloster/ Havells / Polycab/ KEI / As per choice of EIC]. [60 Nos 90 W LED for out door]

Supply & delivary of 1.1KV grade 4 core 16 sq. mm. multy stranded alluminium conductor Armoured cable. -[Make- Gloster/ Havells / Polycab/ KEI / As per choice of EIC]. [60 Nos 90 W LED for out door]

Supply & delivary of 1.1KV grade 4 core 10 sq. mm. multy stranded alluminium conductor Armoured cable. [from Substation building Tto security light] [Make- Gloster/ Havells / Polycab/ KEI / As per choice of EIC].

Supply & Fixing compression type gland complete with brass gland, rubber ring for dust & moisture proof entry and Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials. i) 4 Core 240 Sq. mm [7(d)/F-4 & 8-a(iii)/F-5]

ii) 4 Core 150 Sq. mm [7(d)/F-4 & 8-a(iii)/F-5]

iii) 4 Core 70 Sq. mm [7(c)/F-4&8-b(xvii)/F-5]

iv) 4 Core 50 Sq. mm [7(c)/F-4& 8-b(xvi)/F-5]

v) 4 Core 25 Sq. mm [7(c)/F-4 & 8-b(xv)/F-5]

vi) 4 Core 16 Sq. mm [7(c)/F-4 & 8-b(xii)/F-5]

vii) 4 Core 10 Sq. mm [7(c)/F-4 & 8-b(xi)/F-5]

Laying of cable as below, after cutting floor /pavement / wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish Incl. following size GI [Hot Dip] Wire as Earthing as per GS. From 2.5 sqmm to 35 sqmm incl earthing attachment in 2x 10 SWG GI [Hot Dip] Wire. [5(i)/F-3 & 118/K-3]

Above 35 sqmm to 95 sqmm incl earthing attachment in 2x 4 SWG GI [Hot Dip] Wire. [5(ii)/F-3 & 136/K-3]

Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting. [ 2(b)/ F- 1 ]

Laying of cable from 3/3½ core 35 sqmm to 50 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting. [ 2(c)/ F- 1 ]

Laying of cable above 3½ core 50 sqmm and upto 3½ core 90 sqmm on wall/surface including S & F MS clams with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting. [ 2(d)/ F- 1 ]

Laying of one No. cable upto 35 sqmm in underground trench 460mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed. [ 1(a)/ F- 2 ]

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required. 25 mm Dia [ 11(a)/ F- 6 ]

Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required. 32 mm Dia [ 11(b)/ F- 6 ]

SUB-HEAD 4--ERECTION & INSTALLATION OF STEEL POLE 7M Hot Dip Galvanized Octagonal Pole with round Hot Dip Galvanized Stearing type Arms Bracket for housing 3 or 4 nos. Flood light ,Top Dia. (A/F) 70 mm and Bottom Dia. (A/F) 130 mm. Thickness of the sheet is 3 mm. Base Plate Dimension (LxWxT) 220x220x12 mm. The pole has 4nos M20 Foundation Bolt of length of 700mm; PCD 220mm. Make: Surya Cat. Ref.: SRL-OP-703 or equivalent model of Transrail/ Valmont)

7M Hot Dip Galvanized Octagonal Pole with 1M Hot Dip Galvanized Double Arms Bracket Top Dia. (A/F) 70 mm and Bottom Dia. (A/F) 130 mm. Thickness of the sheet is 3 mm. Base Plate Dimension (LxWxT) 220x220x12 mm. The pole has 4nos M20 Foundation Bolt of length of 700mm; PCD 220mm. Make: Surya Cat. Ref.: SRL-OP-704 or equivalent model of Transrail/Valmont)

7M Hot Dip Galvanized Octagonal Pole with 1M Hot Dip Galvanized Single Arms Bracket Top Dia. (A/F) 70 mm and Bottom Dia. (A/F) 130 mm. Thickness of the sheet is 3 mm. Base Plate Dimension (LxWxT) 220x220x12 mm. The pole has 4nos M20 Foundation Bolt of length of 700mm; PCD 220mm. Make: Surya Cat. Ref.: SRL-OP-705 or equivalent model of Transrail/Valmont)

Charges for providing CC (6:3:1) base block (around the pole) dimension 0.60x0.60x0.76 mt. above ground level, neatly cemented finish (3 mm thick), at the base of pole incl. S&F 3mtr long Earth spike with S&F 20 mm x 3 mm galvanised (Hot Dip) MS flat upto 2 mtr on muffing with GI saddles as required and connection to pole incl. bolts, nuts, washers etc. for street light wiring. [NS]

Fixing only outdoor / street light type fluorescent light fitting or MV light fitting complete with all accessories to be fixed /projected from the wall of the building incl. making holes/providing clamping arrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc.. [C-3(18)]

Supplying and fixing waterproof & dustproof PVC (Poly Carbonate, SMC/FRP) cable loop box[Syntex/similar] having thickness 4-6 mm comprising Neutral Link on DIN rail, 2 Pole 6 A MCB, 4way TPN Connectors Color Red with rubber gasketted, metalic hinged PVC Door or cover with brass machine screws etc., earthing terminal with lug, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. incl. Inter connection with suitable size of copper wire including painting with anticorrosive paint as required / As per Choice of EIC. (300x250x100)mm [NS]

Supplying and fixing pipe protection from ground level to upto loop box (apoxx 1.5Mtr) & fixing with street pole incl. MS clamps with bolts, nuts etc by providing Pvc Storm Water Pipes 1.5'INCH As per Choice of EIC. [NS]

Painting of Steel Tubular Pole and mine Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint. [Upto 9.0 mtr. long pole] One coat of red lead/Zinc chromate priming [7A(a)(i) /H-2]

1st coat of synthetic enamel paint over the primer. [7A(a)(ii) /H-2]

2nd coat of synthetic enamel paint over the 1st coat.[7A(a)(iii) /H-2]

SUB HEAD 5-- Out Door LIGHT Supply of 240V, 36 W E-Topp LED post top lantern with spun aluminium canopy and die cast aluminium with clear acrylic diffuser light luminarie complete with all accessories and equipped with IP66 Protection (Make- Surya , cat no.- SLEPT36WETPP or equivalent model of Philips/Wipro) (With 5 Yrs Warranty)

Supply of 240V, 90 W LED street light with system output of >110 lm/W. Aluminium PDC housing with integrated lens cover that complies with IP66 protection. luminarie complete with all accessories (Make- Surya , cat no.- SLE UL 90W IP66 NGN or equivalent model of Philips/Wipro ) on existing MS Pipe/Mini Pole/Long Pole as per direction of E.I.C. (With 5 Yrs Warranty)

Supply of 240V, 50 W LED street light with system output of >110 lm/W. Aluminium PDC housing with integrated lens cover that complies with IP66 protection. luminarie complete with all accessories (Make- Surya , cat no.- SLE UL 50W IP66 NGN or equivalent model of Philips/Wipro ) on existing MS Pipe/Mini Pole/Long Pole as per direction of E.I.C. (With 5 Yrs Warranty)

Supply of 240V, 100 W LED Flood light with system output of >100 lm/W. Aluminium PDC housing with integrated lens cover that complies with IP66 protection. luminarie complete with all accessories (Make- Surya cat no.- SLE FL 100W IP66 LMS NEO or equivalent model of Philips/Wipro ) on existing MS Pipe/Mini Pole/Long Pole as per direction of E.I.C. (With 5 Yrs Warranty)

Out Door Kiosk (Raw panel): Supply and installation L . T. Feeder Piller Box of suitable size made of 3 mm. thick M . S . sheet and 50 mm. x 50 mm. x 10 mm .angel and 50 mm. x 10 mm. flat iron bar frame duly welded frame having suitable nos. of cable entry and out position & water shedding arrangement with both side opening system with two part door ( made of 3 mm. M S . Sheet ) including railway type locking and extra body locking arrangement including supply and fixing 7 lever Godrej lock with triplicate keys at both ends incl. making necessary interconnections with suitable length and gauge of copper wire having copper sockets in both ends with main switches , BBCs and other components , including providing C . C (4:2:1) base block of suitable size under 3 ft. depth Under the ground level and providing brick foundation of suitable size up to 2 ft. Above the ground level incl. necessary plastering (5 : 1) and 3 mm. thick neat cement finish having provision of cable entry hole for temporary D . G /future connection and providing earthing attachment with suitable nuts bolts washers and powder coated painting with approved smoke grey paint by two coats over one coat of R .O . primer incl. fill up the cable duct of feeder piller box with sand consisting of the following components : -( Feeder Piller Box shuld be manufacture from CPRI approved panel manufactures and befor panel fabrication an Auto Cade drawing of panel should must be submitted for approval to EIC) INCOMING SWITCHES: a) 415V 63 A TPN SFU Sheet Steel enclosure type [ Make - L&T/Siemens/ABB]- 1 No. BUSBAR: 500 V 100 A B B C with 4 Nos. tinned copper bar each phase and neutral on porcelain chair with duly wrarpped with colour PVC tapes Reds, yellow,blue,and black and for phases and neutral identification...1 Set. OUTGOING SWITCHES: 415 V 32 A FP MCB on DIN rail. (LT/Siemens/ABB)- 4 Sets. ) Including necessry Interconnection with appropriate size of flexible FR Cu cable/ wire.

Supply & Fixing Timer DB for intermittent operation of Compound Lights Consisting of following accessories : Double Door IP30-IK08 DB [2 row of 14 M] (Make-Legrand Cat No.-507705) - 1 Nos, Astronomical Digital Time Switch (L&T, Cat No. Astro Mini T2DDT7 1CO) - 1 Nos, 25A FP Contactor having Manual override operation for test & Repair - 1 Nos incl. Inter connection with suitable size of copper wire (Make-Legrand Cat No.-412551) - 1 Nos, FP Isolator 63A- 1Nos, SPMCB 6-32A as per direction of E.I.C.

SUB-HEAD 6 -- EARTHING Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. Long With TATA-Medium GI pipe as per GS [ 2(a)/G-1]

Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) Cl hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe. [3(a)/G-2]

Excavation of soil for installation of Earth Electrode and filling & ramming. (For Soft Soil) [1(a)/G-1]

Extra for treatment of soil by using salt & charcoal or coke for plate electrode [3(b)/G-2]

Connecting the equipments to earth busbar including S & F Solid GI (Hot Dip) wire of size as below as per GS. No.-4 SWG [5(a)(i)/G-2]

Connecting the equipments body to earth busbar including S & F 25 mm x 6 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc. [d/G-3]

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required [4(a)/G-2]

Dismantling charges of existing items i.e. old panel and DBs, Cable etc. and handing over hospital authority.

N.B: i) Payment will be made after availability of fund from concern Department. ii) Payment will be made as per P.W.D norms.

B M ELECTRIC (BID ID -5620379)

M/S. S. D. CHATTERJEE AND CO. (BID ID -5620502)

M/s Joy Durga Electric Repairing Shop (BID ID -5621914)