PROVN OF TOILET BLOCK NEAR BLDG NO AL-78 AT 16 JAT AND CERTAIN SANCTIONED WORK IN AREA OF AGE BR-II AND MIL STN BARABANKI UNDER GE (EAST) LUCKNOW.

Amount

Excavation in trenches not exceeding 1.5 M wide and not exceeding 1.5 M in depth for foundation, trenches etc and getting out in soft/loose soil complete all as specified and directed.

Removing of excavated materials to a distance 1.5km and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and directed.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil complete all as specified and directed.

Earth filling under floor, including spreading, leveling, watering and well ramming in layers n.exc 25 cm in soft/loose soil complete all as specified and directed. Note : earth obtaind from excavation under item No 1 & 2 shall be use.

Surface excavation not exc 30cm deep and averaging 15cm deep and getting out hard/dense soil complete all as specified and directed.

Excavating in post holes in soft/loose soil (or similar holes) each n exc 0.5 cu.m. getting out, returing, filling in and ramming earth or broken ruble mixed with earth around, in layers not exceeding 25 cm , watering, and removing surplus soil to a distance not exc 50 M and making good surface complete all as specified and directed.

M&L for cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate as in foundations filling, sub base and mass concrete filling, etc complete all as specified and directed.

M&L for mild steel TMT bars 10 mm dia and over as in reinforcement cut to length, bent in shape required including cranking, bending, spirally hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Description all as per item No 8 above but mild steel TMT bar 6 mm to 8 mm dia.

Description all as per item No 8 above but 5 mm dia and over up to and including 10 mm dia in stirrups, spacers and binders

M&L for RCC M-25 (using 20 mm graded stone aggregate) as in foundations, footings, plinth beams; bases forcolumns, etc.complete all as specified and directed.

M&L for RCC M-25 (using 20 mm graded stone aggregate) as in Column, pillars, piers, posts and struts etc complete all as specified and directed.

M & L for RCC M-25 (using 20 mm graded stone aggregate) as in roof slabs, shelves etc complete all as specified and directed.

M & L for RCC M-25 (using 20 mm graded stone aggregate) as in chhajas, roof beam, bands, lintel beam, etc complete all as specified and directed.

Use & waste formwork to sides of concrete in foundations, footings, bases of columns, sides and soffits (if any) plinth beams, and similar work complete all as specified and directed.

Use & waste formwork to sides of concrete of pillars, posts, struts, piers, columns etc complete all as specified and directed.

Use & waste form work to soffits of roof slabs, floor slabs and similar work not exc 200 mm thick fair finished surfaces (flat) complete all as specified and directed.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed.

M&L for Formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed.

M&L for formwork to edges of concrete flats, roofs and sides of RCC/ PCC bands in walls, and similar work exc 10cm but not exc 20cm wide complete all as specified and directed.

Ditto as per item 20 but exc 5 cm but not exc 10cm wide complete all as specified and directed.

M & L brick work with fly ash bricks, straight or curved on plan exc 6M mean radius, old size brick built in cement mortar 1:6 complete all as specified and as directed.

M&L for brick work with fly ash bricks, straight or curved on plan to any radius as in half brick thick wall built in CM 1:4 complete all as specified and directed.

M & L PCC 1:2:4, type B-0, with 12.5mm stone aggregate 40 mm thick in Damp Proof Course to horizontal or vertical surfaces including necessary formwork using water proofing compound as per manufacture's instruction complete all as specified and directed.

M&L for plastering 15 mm thick in CM 1:4 on fair faces of brick or concrete surfaces, finished the surface even and smooth with using WPC @ 2% by weight of cement (Note- WPC shall be measured and paid separately)

M&L for rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces complete all as specified and as directed.

M&L for 15mm thick cement plaster on other than fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth complete all as specified and directed.

M & L rendering 5mm thick in CM 1:3 as in ceiling ,soffits of slab and finish the surface even and smooth without using extra cement complete all as specified and as directed.

M&L for 100mm thick PCC 1:5:10 type E-2 using 40mm graded stone aggregates as in sub base of floors complete all as specified and directed.

M&L for 25 mm thick PCC 1:2:4 type B-0 using 12.5mm graded stone aggregates as in base of floors, finished the surface even and rough complete all as specified and directed.

M & L glazed ceramic joint free coloured tiles in vertical surfaces 600x300x7mm thick, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick screed bed in cement mortar 1:3 complete all as specified and directed.

M & L coloured Non Skid ceramic jointless tiles 300x300x7mm thick in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer with CM 1:4 complete all as specified and directed.

M & L for non skid joint free coloured ceramic tiles 7 to 8 mm thick (square or rectangular area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sq in floor including 15 mm thick screed bed or bedding layer of cement mortar 1: 4 set and jointed in neat cement slurry and pointed in coloured cement to match with the colour of tiles complete all as specified and directed.

M & L for non skid joint free coloured ceramic tiles 7 to 8 mm thick (square or rectangular area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sq in floor including 15 mm thick screed bed or bedding layer of cement mortar 1: 4 set and jointed in neat cement slurry and pointed in coloured cement to match with the colour of tiles over neat cement slurry 3kg/sqm complete all as specified and directed.

All as per srl No 35 above but as in skirting /dado etc laid over and including 10 mm thick screed bed in cement mortar 1:3 complete all as specified and directed.

M&L for 20 mm thick granite for (of any type) machine cut and polished in steps, jambs, pillar window cill, cooking plateform etc laid over 15 mm thick screed bed in CM 1:4 , bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in plinth protection laid in bays not exc 1.5m with expansion joints 30x10mm filled with mixture of hot bitumen and sand, finished the surface even and smooth without using extra cement complete all as specified and directed

M&L for hard core broken stone of gauge n. exc. 63mm, deposited, spread and levelled in layers n. exc. 15cm thick, water and rammed to a true surface complete all as specified and directed.

Supply only integral water proofing compound (ISI marked) complete all as specified and directed.

M & L for preparing new plastered or unplastered wall surfaces and applying two coats of oil -emulsion distemper over a coat of putty and alkali resistant priming paint complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying three coat of white wash complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coat of white wash complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall applying two coats of cement based paint over one coat of Primer complete all as specified and directed.

S&F 15mm dia tubes medium grade galvanised, with all fitting and fixed complete to walls/ ceilings/ concealed or laid in floors complete all as specified and directed.

S&F 20 mm Tubes medium grade galvanised with all fitting and fixed complete to walls/ ceiling / concealed or laid in floors complete all as specified and directed

S&F 500 Ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top)in white colour triple layered, hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed

S&F 20 mm dia brass gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F Vitreous China wash hand basin under counter type oval shape of size 550x400mm including brackets complete all as specified and directed.

S & F 15 mm dia pillar taps cast copper alloy with capstan heads chromium plated screwed down hidh pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.

S & F PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F 32 mm bore waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement complete all as specified and directed.

S & F 32 mm bore Low density polyethylene pipes for Wash hand basin etc complete all as specified and directed.

S&F Vitreous China urinals, half stall type (flat back), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including spreader, 60mm long brass screws, pointing around urinal back in cement; fixing with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed

S&F vitreous china wash down water closet pan pedestal pattern, including P/S trap and connection to drain (or outgoing pipe) and pvc seat cover including jet spray excluding flushing cistern and flush pipe complete all as specified and directed

S&F Vitreous china sqatting pan, Orissa pattern, size 580 x 440 mm white , with integral foot rests including trap (excluding flushing cistern and flush pipe ) complete all as specified and directed

S&F PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets of capacity 10 litre ISI marked complete all as specified and directed. Make :- Commander/Hindware/Jindal

S & F 20 mm dia float valve high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe with fly nuts complete all as specified and directed.

S & F 15 mm bore Bib taps cast copper alloy chromium plated fancy type with crutch or butterfly handle sc-rewed down screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F brass chromium plated shower rose 125 mm size with or without swivel joints including fixing to steel pipe or union complete all as specified and directed

S & F 15 mm bore Stop valves (angle type) cast copper alloy chrominum plated fancy type screwed down high pre-ssure with crutch or but terfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

Description all as per item no 62 above but concealed type for shower complete all as specified and directed.

S&F health faucet(hand shower) 8 mm dia, 1 m long flexible metal tube and wall hook/holder in polished crome complete all as specified and directed.

S & F 75 mm dia PVC (SWR) floor trap, plain with CP grat-ing including joint-ing with solvent cement complete all as specified and directed.

M&L soap dish with glass tray fixed to wall with plug and chromonium plated brass screw embedded in the wall complete all as specified and directed.

S&F Brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F CP Brass toilet paper holder of superior quality complete all as specified and directed.

S&F CP Brass Jet spray with hand hold arrangement incl 1.5 m long flexible pipe with hook of superior quality complete all as specified and directed.

S&F CP Grating doom of 125 mm dia complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed

S & F 75 mm bore PVC (SWR) bends any radius complete all as specified and directed

S & F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed

S & F 110 mm bore PVC (SWR) junction single T, equal or unequal complete all as specified and directed.

S & F110 mm bore PVC (SWR) vent cowl complete all as specified and directed.

S & F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and directed.

S&F Factory made soild PVC profiled panel door shutter 28mm thick with integral skin as frame & 3mm thick high pressure compact laminate on both side of approved colour as infill, with'C type Gl or 40 x 20 x19 of MS pipe as stiffner complete all as specified and directed.

S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

S&F steel windows with side hung shutters glazed or gauged including projection type hinges with steel handle and steel peg stay complete with glazing bars dovetailed and welding complete as specified and directed.

S&F Mild steel Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work including drilling conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F steel work as for post including guset plate of suitable size welded at both ends for anchoring and for fixing of purlin and rafter including special shaped washers etc complete all as specified and directed.

S&F 200 mm long aluminum anodised barrel tower bolts of extruded section with stainless steel srews complete all as specified and directed.

S&F 150mm long aluminium handles, cast type, anodized and fixed complete all as specified and directed.

S& F 100 mm size butt hinges, medium weight, stainless steel, and fixed complete all as specified and directed

M&L butt hinges,extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed 100 mmlong, type B-21

S&F 3 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complet all as specified and directed

S&F stainless steel steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed

M&L for two coats of synthetic enamel paint over a coat of Red oxide primer over steel surfaces including preparation of surfaces all as specified and directed.

M&L for cement concrete type B-1 1:2:4 as in cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets, copings, surface channels and drains, benching of man holes, laid to shape and slope and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

M&L PCC 1:4:8 type D-2, using 40mm graded stone aggregate as in bed of drain pipe including packing under and haunching against the sides of pipes after they are laid and tested for 150mm dia of pipe complete all as specified and directed.

M&L for 150 mm dia salt glzed stoneware drain pipes grade ‘A’ laid in trenches and jointed in cm 1:1 complete all as specified and directed.

M&L for providing pre-cast RCC 1:2:4 type B1 using 20 mm graded stone aggregate as in landings, cover slab (for man holes and drains) including necessary form work set in CM 1:4 complete all as specified and directed.(Note :- Reinforcement shall be measured and paid separately)

Construction of Septic tank of 50 user's all as shown in drawing No (as per CELZ TD-217 Sheet No 1/2 & 2/2) complete all as specified and directed.

Construction of Soak well of size 1.20 Mtr dia and 4.50 Mtr deep all as shown in drawing No (CELZ TD-576 Sheet No 1/2 & 2/2) complete all as specified and directed.

M&L 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in sub base of floor complete all as specified and as directed.

S&F 60 mm thick, machine pressed rubber moulded, glossy coloured, precast conctete interlocking paver block any shape and size of M-35 grade of approved shade laid over 25mm thick sand cushion and filled with fine sand complete all as specified and directed.

M & L for roof treatment with polymeric membrance for non approachable roof as under:- (a) M&L for plastering 10mm in CM 1:4 using 100% course sand on roof incl WPC 3% by weight of cement. (b) Applying one coat of bituminous primer @ 0.3 ltrs/Sqm over prepared surface. (c) Applying one coat of hot blown bitumen grade 85/25 @ 1.2 Kg/Sqm. (d) Supply and lying plymeric water proofing membrane weight not less than 3 Kg/Sqm and minimum 3mm thick laid on primed surface by torched. (e) Applying one ocat of hot blown bitumen grade 85/25 @ 1.2 Kg/Sqm (f) Applying bitumen based aluminium paint in two coats @ 0.10 ltr/Sqm.

Taking down cement or cement lime plaster on brick walls etc including raking out joints, hacking for key scrubing down with water etc complete all as specified and directed.

Demolition of cement concrete not exc 15 cm thickness (below and above) ground floor complete all as specified and directed.

Demolition of brick/stone masonary incl all quoins, pillars etc, built in cement mortarcomplete all as specified and directed.

M & L second class hard wood, solid, straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S & F 35mm thick 2nd class hard wood Glazed & Skeleton shutters open rebated & prepare to receive glass, gauge etc with sash bars, but divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers etc in window, ventilator etc, sizes of member of shutter as specified in SSR Part I ,section 8, clause 8.24(b) fitted to chowkats complete all as specified and directed.

Cutting holes in brick walls built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required, Depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall exc half brick wall but not exc one brick complete all as specified and directed.

S & F MS work as in stays, steps, hooks, holdfasts, wind ties including sequring bolts etc complete all as specified and directed.

Dismantling of asbestos cement (corrugated, semi corrugated etc.) sheets in roof coverings complete all as specified and directed.

Dismentling timber scantling under 40 sq cm in section, framed in any position complete all as specified and directed.

S&F rolled mild steel section as in main and cross beam, hip and jack rafters; purline where connected to common rafter and running rail and guides for sliding door;fixed with angle cleat or other connecting plates conforming to 410-W (Gde-E-250) quality A complete all as specified and directed.

S&F 0.50 thick (total coated thickness) pre-colour, pre-profiled (Galvalume/Zinkalume) sheets as in roof, wall cladding, north light curves, fixed with zinc coated self drilling fastener including EPDM washer complete laid with one corrugation side laps and min 150mm end lap laid to slope complete all as specified and directed.

M&L for cement concrete type C2 1:3:6 (40 mm graded stone aggregate) in surface channels and drains complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified and directed.

M&L for preparing old decorated surfaces of wall by brooming down or steel wire brushing including cornices,pilasters etc and applying one coat of white wash complete all as specified and directed.

M&L for preparing old decorated surface of wall by brooming down,scrapping down smoke soot,moulds,moss and trading oil and greasy spots,washing,rubbing down,stopping distempered surface and applying one coats of oil bound distemper white or tinted complete all as specified and directed.

M&L for preparing old decorated surfaces by brooming down or steel wire brushing,scrappingdown smoke soot mould, moss and treading oil and greasy spots from plasterd or unplasterd surfaces of ceiling including cornices,pilasters etc and applying one coats of white wash complete all as specified and directed.

M&L preparing old painted surfaces of wood and wood based materials of any description over 10 cm in width or girth and applying one coats synthetic enamel paint complete all as specified and directed.

M&L for one coat of painting with synthetic enamel paint on old steel surface(previously decorated) for grill,guard bars and other steel surface etc including preparation of surface complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and as directed .

Taking down and fefixing in same opening after easing of shutter of any description exc 1.00 sqm and not exc 2.00 sqm each complete all as specified and as directed .

M&L for preparing of new wooden surface of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

Material and labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, FRLS copper conductor cable with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 20mm dia or higher, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and replacement of sunk zinc coated pressed steel terminal box of 1.60mm thick with 3mm thick plastic laminated sheet top cover, brass screws, cup washers etc and making good to the disturbed surfaces to match the existing complete all as specified and directed for one light / fan point controlled by one switch.

All as per srl item No 120 here-in-before but one 3 pin socket outlet, 05 Amps, independent with cable 1.5 Sq mm size.

All as per srl item No 120 here-in-before but one 3 pin socket outlet 05 Apms point on the same board with other switches with cable 1.5 Sq mm size.

All as per srl Item No 120 here-in-before but one 3 pin socket outlet, 15 Amps, independent with cable 2.5 Sq mm size.

Supply and fixing switch piano flush type, single pole, one way, 05 Amps complete all as specified & directed.

Supply and fixing socket outlet 2 in 1, 3 pin, 05 Amps complete all as specified & directed.

Supply and and fixing switch socket combination 2 in 1, 3 pin, 05 and 15 Amps, flush type, universal complete all as specified & directed.

Supply and fixing lamp holder, PVC / Polycarbonate type with back plate suitable for batten fittings complete all as specified & directed.

Supply and fix in replacement of integrated LED bulk head fitting 10 Watt, 6500K with IP 65 protection comprises of high pressure die cast aluminium housing, polycarbonate cover, etc complete all as specified and directed. Make : Havells, Cat No : HEXAFT10WLED857SSYMBOPC, or Equevalent in philips / Insta power

Supply and fix in replacement of single side connection LED T8 tube light rod 20 Watt, 6500K of four feet long into and including LED tube light fixture of four feet long with T8 push fit type holders, connector block, end caps, etc including connecting up complete all as specified and directed. Make : Havells, Cat NO REGALBATTENT8UPT01X22WSSBS & PHOTONULTRA1213T8SSTL20WLED865SPC or Equevalent in philips / Insta power

Supply and fix in replacement of LED security light fitting 45 watt, 5700K with IP 66 protection comprises of a pressure die cast aluminium housing, heat resistance toughened glass, LED lenses, surge protector, electronic driver, etc and all accessories pre-wired including connecting up with PVC insulated copper conductor cable 1.5 Sq mm, 3 core as required for connections and 32 mm bore light grade G. I. tube mounting bracket of 1.5 metre in length, bend to shape at 140 degree in ‘L’ shape and fixed to wall by means of 02 nos. of 40 x 5 mm flat iron clamps, nuts, bolts and washers etc complete all as specified and directed. Make : Havells Cat No ENDURAPEARLNEOSL 45 WLED 757 SASYTOPC or Equevalent in philips / Insta power

Supply and fix ceiling rose, 3 phase / PVC / polycarbonate, isolated body complete all as specified directed.

Material and labour for wiring for circuit / sub main wiring with 2 x 4.0 Sq mm alongwith 1 x 2.5 Sq mm earth wire of FR PVC insulated copper conductor, single core cable drawning into PVC concealed conduit including cutting chases for concealed conduit wiring and making good complete all as specified & directed.

Supply and fixing single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB, 240 volt, 20 Amps complete all as specified & directed.

Supply and fix sheet metal enclosure distribution board, single pole and neutral, AC, 240 volts, 08 way with 200 Amps rated bus bar and double door complete all as specified and directed.

Supply and fixing of MCB, SP, AC, 240 volts of 06 to 32 Amps capacity complete all as specified & directed.

Supply and fixing of MCB, DP, AC, 240 volts of 32 Amps capacity complete all as specified & directed.

Supply, laying, testing and commissioning LT underground XLPE insulated, armoured heavy duty electric cable with aluminium stranded conductor, 1100 volt grade conforming to IS-1554 and ISI marked of cross sectional area 16 Sq mm 02 core size in trenches, on wall, road crossing through protection pipe etc. complete all as specified and directed.

M&L sand cushioning with dry fine sand including filling, spreading, levelling in layers in cable trench with approved quality of sand for protection of under ground cable complete all as specified and directed.

Supply and laying 50 mm bore galvanised steel tubes with all fittings, light grade laid in trenches for cable protection complete all as specified and directed.

Supply and laying common burned clay bricks sub class B designation of old size bricks complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in electrical plate No 3 on serial page No 497 of SSR part I - 2009 and connected to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40mm thick in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 75mm center to center both way with 12mm dia lifting handle and pit / chamber in PCC 1:3:6 type C1, Angle iron 40mmx40mmx3mm frame for pit cover including testing on completion complete all as specified and directed.

M/S S S A ASSOCIATES

M/S Reliance Construction