ADDN ALTN TO SMQs AT MADAMBAKKAM CAMP AT AF STATION TAMBARAM

Amount

Taking up or down 15mm dia steel tubing and connections in wall, ceiling or floor etc complete all as specifed and directed.

All as per item No 1 above but 20 mm dia steel tubing.

S&F 20mm CPVC pipes SDR 11 & plain CPVC SDR 11 fittings, elbows, tee, adapters, union on walls/ ceiling or laying in floors complete all as specified and directed.

All as item No 3 above but outer diameter of pipe 25mm.

S&F gate valve 25 mm dia with iron wheel head, screwed both ends for fixing to iron pipe all as specified and directed .

M&L Fly ash brick with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls in cement mortar 1:4 including demolition of existing brickwork complete all as specified and directed.

Taking down cement plaster, any description on brick walls or on concrete surfaces including raking out joints, hacking for Key, scrubbing down with water, etc, and removing same from the Site(s), complete all as specified and as directed.

M&L for rendering 15mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar in two layers (5mm finishing layer in CM 1:4 over 10mm base layer in CM 1:6 ) rendering 5mm thick in cement mortar 1:4 mixed with water proofing compound at a rate of 3% by weight of cement complete all as specified and directed. Note :- WPC shall be measured and paid seperately

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 5 mm thick in cement mortar 1:3 on concrete surfaces on ceiling finished even and smooth without using extra cement complete all as specified and directed.

Taking down (steel/ wooden) frame any description exc. 1.5 sqm but not exc 4 Sqm each (with out taking off shutter from the frame) incl hardware fittings complete all as specifed and directed.

All as per item 11 but n exc. 1.5 sqm each with shutters and hardware fittings complete all as specifed and directed.

S&F 2nd class hard wood factory made glazed/skeleton shutters 35 mm thick open rebated prepared to receive glass, gauze divided in squares with plain, chamfered or rounded, mitred and rebated sash bars any number with plain, chamfered or rounded, mitred and rebated beads for securing glass gauze etc complete all as specified and directed.

S&F factory made flush shutters 35 mm thick solid core construction with particle board core and 3mm thick BWP Ply wood face panels, commercial type on both sides with 6mm thick and both face covered with decorative face veneer with lipping/ frame to match complete all as specifed and directed.

S&F brass CP 3-in-1 wall mixer for mixing hot & cold water including CP Telephonic and 125mm size brass chromium plated over head shower rose L bend tube and fixing accessories screwed down for iron pipe and fixed complete all as specified and directed. Make Prayag cat part No 8080 / Jaquar/ Parryware or equivalent, complete all as specified and directed.

S&F aluminium die cast door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F factory made flush shutter 25 mm thick solid core construction with block board and plywood face panels, commercial type on both sides and both face covered with decorative face veneer with lipping/ frame to match complete all as specifed and directed.

S& F factory made pre laminated 18mm thick lead free 100% solid WPC (wood polymer composit) sheet one side prelam sheet and other side wood natural colour for cupboard shutter having high natural fiber content 25 to 30 % wood colour sheet with density not less than 600 kg /Cum and WPC to be laminated with PVC foil of min 14 micron thick of approval design bent 90° incl 100% termite/ water proof, fire rertradant, Eco friendly and finish at all edges at level for making edges lipping using binding tape etc as in kitchen cupboard, cabinet etc. complete as per manufacturer's specification and as directed by Engr-in-charge.

M&L for Zinc finished telescopic drawer channel 24 inch long, ball bearing slide for kitchen cabinets and wardrobe complete all as specifed and directed.

S&F SS wire basket (AISI 304 gde ) non magnetic multilayer feuba nickel chorme plated for multipurpose utensils container with storage basket pull out type for utensils size 480x500x150mm of grade 304 with necessary fixing clips etc complete all as specified and directed.

S&F SS wire basket (AISI 304 gde ) non magenetic multilayer feuba nickel chorme plated for multipurpose utensils container with (cup and saucers basket) storage basket pull out type for utensils size 380x500x100mm of grade 304 with necessary fixing clips etc complete all as specified and directed.

S&F SS wire basket (AISI 304 gde) non magnetic multilayer feuba nickel chorme plated for multipurpose utensils container with (Plate Basket) pull out type for utensils size 380x500x100mm of grade 304 with necessary fixing clips etc complete all as specified and directed.

S&F SS wire basket (AISI 304 gde) non magnetic multilayer feuba nickel chorme plated for multipurpose utensils container with (cutlery basket) pull out type for utensils size 380x500x100mm of grade 304 with necessary fixing clips etc complete all as specified and directed.

S&F SS wire basket (AISI 304 gde) non magnetic multi layer feuba nickel chorme plated for multipurpose utensils container with (Grain trolley Basket) pull out type for utensils size 380x500x100mm of grade 304 with necessary fixing clips etc complete all as specified and directed.

S&F SS wire basket (AISI 304 gde ) Non magnetic multi layer feuba nickel chrome plated for multipurpose utensils container with (Bottle puley out basket) pull out type for utensils size 380x500x100mm of grade 304 with necessary fixing clips etc complete all as specified and directed.

S& F Magnetic catcher as approved by GE, fixed with nut and bolt complete all as specified and directed.

S&F factory made solid PVC moulded flush door shutter with wood free EPS, 30mm thick (Style) with 2, 4 or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face & 2 mm thick plain colour PVC sheet on back face, supplying and fixing in frame at site as per specification & drawing, complete all as specified and directed.

S&F for solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube supply and fixing as per specification and drawing complete all as specified and directed.

S&F 100 mm long stainless steel butt hinge with stainless steel screw and fixed complete all as specifed and directed

S&F stainless steel handle of size 150mm fabricated type and fixed complete all as specifed and directed

S & F continous (piano) hinges mild steel, 40mm width of flaps (when open), bright finish or electrogalvanised complete all as specified and directed.

S&F aluminium anodised barrel tower bolt of extruded section 150 mm long and fixed complete all as specifed and directed.

S&F aluminium anodised barrel tower bolt of extruded section 200 mm long and fixed complete all as specifed and directed.

S&F aluminium anodised 300 mm long sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of stainless steel and fixed complete all as specifed and directed.

S&F stainless steel handle of size 150 mm and fixed complete all as specifed and directed.

S&F Floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring 150mm long and fixed complete all as specifed and directed

S&F Mild steel hold fast made of flat iron conforming to 410-0 or Fe-310-0 complete all as specified and directed.

Preparing surfaces of wood and wood based materials, steel and iron work and treating back of chowkats area exc 0.1 Sqm and n.exc 0.5 Sqm each using tar or coal tar / black bituminous paint complete all as specified and directed.

M&L PCC 1:3:6 type C1 (using 20 mm graded agg) as in coping, PCC block for fixing of hold fast, sanitary fittings etc., complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortor bedding (but not backing) removing the rubbish of the premises complete all as specifed and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing rubbish outside the MoD land complete all as specified and directed.

M/L cement concrete type B-0, 1:2:4 ( using 12.5 mm graded aggregate), 25 mm thick as in floors finished rough for floor finishes complete all as specifed and directed.

M/L glazed ceramic coloured tiles in vertical surfaces 450 x 300 x 6-7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match laid over and including 10mm thick backing coat in cement mortar 1:4, complete all as specified and directed.

M/L vitrified dark shade ceramic tiles 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in cement mortar 1:6, complete all as specified and directed.

All as per item No 44 but as in skirting/ dado including 10 mm thick backing coat in cement mortar 1:4.

Rendering 10mm thick in cement mortar 1:3 mixed with and including water proofing compound to sunken portion with proper slope towards outside and finishing cement concrete or brick work at a rate of 3% by weight of cement finished even and smooth with out using extra cement, complete all as specified and directed.

M&L for cement concrete type E2, 1:5:10 (using 40mm graded aggregate) in foundations, filling mass concrete as in sunken floor complete all as specified and directed.

M&L cement concrete type C-1, 1:3:6 (using 20mm graded aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair incl making joints at every 2.5 m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight and complete all as specified and directed.

Cutting chases, pinning in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills, shelves, complete all as specified and directed.

M&L RCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in water tank levelling course /platform/Kitchen shelves and like supported walls including necessary use and waste of form work,exposed surface of concrete shall be finished even and smooth without using extra cement complete all as specified and directed.

Reinforcement 10mm dia and over TMT bars cut to length, bent to shape reqd incl cranking, bendding spirally for hooping, hooking ends and binding with incl MS wire annealed (not less than 0.9 mm dia) and securing with clips fixing as rungs for climbing up to the roof top, complete all as specified and directed.

S&F brass chromium plated tubular towel rails 20mm dia D type 60cm long between flanges with chromium plated bracket and fixed including taking out existing towel rail all as directed. Make Prayag, Jaquar or equivalent complete all as specified and directed.

S&F Rotational moulded polyethlene water storage tank of capacity 1000 litres three layers (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete including 25mm dia ball brass valve high pressure with polythene float including suitable nipple and dismantling & lowering of existing RCC/ PVC tank of any capacity with and including removal of rubbish outside MD land complete all as specified and directed.

S&F vitreous china WHB with Pedestal pattern of size 460x350mm incl GI Brackets, 32 mm CP brass waste coupling with check nut and washers, PVC connectcetion and waste pipe of suitable size including taking out existing WHB complete all as specifed and directed Make Prayag cat part No 4656/ Jaquar/ Parryware/ CERA/ Hindware or equivalent complete all as specifed and directed.

Taking down of old Stainless steel plate rack of any description, cleaning incl minor repairs and refixed to the wall with suitable rawl plugs and screws complete all as specifed and directed.

S & F Harrison rail, mild steel stainless steel (wall thickness min 1 mm) with approved finials and fixing brackets, stops, rollers etc including taking out existing rail complete all as specified by Engr In charge.

S&F15 mm bore CP bib tap long body cast copper alloy fancy type including suitable flangescrutch or butterfly handle screwed down for iron or for brass ferrule including taking out existing bib tap Make prayag cat part No 8208/ Jaquar/ Parryware or equivalent complete all as specifed and directed.

S&F 15 mm bore pillar tap cast copper alloy fancy type including suitable flanges chromium plated screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes including taking out existing pillar tap. Make prayag cat part No 6302-N / Jaquar/ Parryware or equivalent complete all as specifed and dirtected.

Supply & fix 15mm bore angular stop cock, chromium plated , fancy type, including suitable flanges screwed for iron pipe or brass ferrule, including taking out existing stop cock complete all as specified and directed Make Prayag cat part No PR-544 / Jaquar/ Parryware or equivalent complete all as specifed and directed.

S&F 15 mm bore, 2 way CP bib tap long body cast copper alloy fancy type crutch or butterfly handles screwed down for iron or for brass ferrule including taking out existing bib tap. Make Prayag Cat part No 6512/ Jaquar/ Parryware or equivalent, complete all as specifed and directed.

Cutting holes in brick walls in cement mortar for inserting GI pipe and making good dismanlted portion in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required exc half brick but n.exc one brick depth of embedded portion from the face of the wall complete all as specifed and directed.

S&F low density polyethylene pipe (LDPE ) of presssure rating 6 Kg/ cm sq of bore of pipe 40mmx750mm long including taking out existing pipe complete all as specified and directed.

S & F PVC (SWR) soil, waste and vent Pipe 75mm bore (dia), single socketed, in any length with rubber ring joint fixed to wall with suitable clamp deemed included in rate or laid in trenches etc., including taking down/ up unserviceable pipe complete all as specified and directed.

All as per Item No. 64 above but 110mm bore (dia).

PVC (SWR) 75mm bore (dia), bends, any radius with access door and Jointing with Solvent Cement and fixed-in-repairs, complete all as specified and directed.

All as per Item No. 66 above but 110mm bore (dia).

S & F PVC (SWR) 75mm bore (dia), branch piece, single (single Y) equal or unequal with access door and jointing with solvent cement and fixed- including taking out existing pipe complete all as specified and directed.

All as per Item No. 68 above but 110mm bore (dia).

S & F PVC (SWR) vent cowl of bore 75mm including taking out existing pipe complete all as specified and directed.

S & F 8 mm glass conical wall mounted bathroom corner shelf set of three piece adjustable, rust proof, scratch resistant, fixed with ss screws with plugs etc complete all as specified and directed

M/L preparation of new wooden surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed

M & L preparation of newly plastered ceilling and applying distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification two or more coats over a coat of primer over 1 mm thick interior putty complete all as specifed and directed.

M&L for complete removal of existing treatment and washing, rubbing down and stopping of distempered and painted surfaces plastered ceilling and applying Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification two or more coats over a coat of primer and over one mm thick interior putty complete all as specifed and directed.

Material & Labour for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm and over one mm thick exterior putty over new surfaces complete all as specified and directed

M&L for complete removal of plastered surface of wall and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon aditives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm and over one mm thick exterior putty old prepared surfaces complete all as specified and directed

M & L preparation of newly plastered wall and applying distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification two coats over a coat of primer and over one mm thick interior putty complete all as specified and directed.

M & L for complete removal of existing treatment and washing, rubbing down and stopping of distempered and painted surfaces plastered wall and applying Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer of required shade and colour complete, as per manufacturer's specification two coats over a coat of primer and over one mm thick interior putty complete all as specified and directed.

S & F PVC flushing cistern of 10 litres capacity, low or high level with valveless syphonic action and float valve, pull knob including brackets, PVC connection, PVC flush pipe 32 mm dia etc., including taking down flushing cistern complete all as specified and directed. Make Prayag cat part No 501/ Jaquar/ Parryware/ CERA/ Hindware.

S & F Vitreous china wash down water closet pan (Pedestal pattern) white 'P' trap (excluding fixing bolts, flushing cistern and flush pipe) and fixed in position including removing existing pan complete all as specified and directed. Make Prayag cat part No 4019 / Jaquar/ Parryware/ CERA/ Hindware.

S & F Vitreous china squatting pan "Orissa" pattern including P or S trap of size 580X440 mm white with intergral foot rests, excluding flushing cistern including setting the trap and pan in cement/ lime concrete all as directed & including removing existing pan and making good to the disturbed floors and as directed by Engr-in-Charge. Make Prayag cat part No 4055/ Jauqar/ Parryware/ CERA/ Hindware.

S & F PVC water closet seat cover white or black closed pattern with flat bottom and cover with PVC, aluminium or MS chromium plated hinge devices etc incl removing existing cover. Make Prayag cat part No-514 /Jaquar/ Parryware/ CERA/ Hindware complete all as specifed and directed.

S & F 15 mm CP health faucet of 1 Mtr long CP flexible tube with necessary fittings including removing existing faucet. Make Prayag cat part No BEA-87/ Jaquar/ Parryware/ CERA/ Hindware complete all as specifed and directed.

M&L PVC (SWR) floor trap, dia of outlet 75mm plain with grating, including jointing, with solvent cement complete all as specifed and directed.

S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples, including fixing in Aluminium side hund window shutters complete all as specified and directed.

S & F framed work such as in doors or gates of angle or other section with gusset plates, rails, braces, etc, complete, drilled/ welded for fixing of steel sheeting, hinges or other covering fixing complete with Fe-410-W (Gde-E-250-quality-A) including two coat of synthetic enamel paint over a coat of primer complete all as specifed and directed.

M&L 25 mm thick (avg) plain cement concrete 1:2:4, type B-0 bring up to the slope to 1 in 75 by providig light weight meterials such as clinder,light weight congrete etc as required complete all as specifed and directed.

M&L for Rendering 5 mm thick in cement mortar 1:3 mixed with water proofing compound at the rate of 3% by weight of cement on roof surfaces while concrete in green complete all as specifed and directed.

Supply only integral water proofing compound.

M& L Post constructional Antitermite treatment, along external wall below concrete or masonary apron using chemical emulsion @ 2.25 litres per linear metre incl drilling and plugging holes etc in apron complete all as specifed and directed.

M & L Post constructional Antitermite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specifed and directed.

S & F Powder coated aluminium grills (Pattern DG-102 with weight, not less than 3.131 Kg/sqm) for windows, ventilators, etc., including joining cleats etc complete all as specifed and directed.

S&F for pressed steel frame 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., including two coat of synthetic enamel paint over a coat of primer complete as specified supplied and fixed.

S&F for pressed steel frames 125x 60mm for doors with one or more rebates including necessary fixing lugs, MS hinges for internal door, spring operated hinges for outer side door, lock strike plate, etc., including two coat of synthetic enamel paint over a coat of primer complete, as specified, supplied and fixed.

M&L 18-20mm thick single slab Granite slab (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and staircase like including 20 mm thick screed bed in cement mortar (1:4), pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite (providing suitable hole for LPG pipe line for cooking platform) including removal of existing slab complete all as specifed and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specifed and directed.

S&F sink with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including taking down existing sink with board complete all as specified and directed.

Excavation in post holes (or similar holes) in hard/dense soil each n exc 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance n exc 50 m and making good surface complete all as specifed and directed.

M&L for plain cement concrete type C2, 1:3:6 (using 40 mm graded coarse aggregate) in foundations, filling and mass concrete complete all as specified and directed

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as complete all as specified and directed by Engr-in-Charge.

S&F steel work in tubular trusses i.e. truss bottom, top bend, sides, side supports, holding plates, posts and base plate etc including special shaped washers etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 complete all as specified and directed by the Engr-in-Charge.

Removing/ taking down of old detoriated plaster surface from chajja/ lintel/ fins/ facia and the like, fixing of chicken wire mesh with staples or nailing, after cleaning the surface, apply a coat of cement slurry, 10 mm thick rendering in two layers in cement mortar 1:4 mixed with water proofing compound at a rate of 3% by weight of cement including finished even and smooth with out using extra cement, and match the surface with existing including neccesary formwork and scafolding arrangements at a height of bldg G+2 level complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings n. exc. 15cm thickness (below or above ground level) complete all as specified and directed.

M & L for chequered cement concrete tiles 30cm x 30cm x 25cm thick with white cement and pigment, set with white cement and pigments, jointed and pointed in neat cement slurry as in floors with grey cement and pigment over screed bedding 20 mm thick in CM (1:6) complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 ( using 40 mm graded stone aggregate), as in sub base to paving complete all as specified and directed.

M & L for cement concrete (1:2:4) type 'B1' ( using 20 mm graded stone aggregate) as seismic, plinth and similar bands, coping, kerbs, cills, steps, parapets, apex stones, bed plates, kerbs, railings up to 60 cm in height, water troughs and the like rounded or chamfered on edges including necessary form work complete all as specified and directed.

M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm in floors and skirting etc set and jointed in neat cement slurry and pointed in coloured cement complete all as specified and directed.

Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made complete all as specified and directed.

S & F sheet glass of ordinary quality 5.5 mm thick and glazing complete with beads fixed with screws in aluminium shutter square n. exc 0.5sqm in each pane complete all as specifed and directed.

S & F Figured glass, pin head type, 5 mm thick and glazing complete with beads fixed with screws in aluminium shutter square n. exc 0.5sqm in each pane complete all as specifed and directed.

M&L for complete removal of existing WPT course (i.e) bituminous felt broken tiles mud phaska including removing grown vegetation roots etc or any other kind of treatment surface over roof slab and and removing loose mortar & dust particles until to reach sound surface by using mechanical or manual tools and attending the cracks , holes like as weak points by using manufactures instruction .Providing and Laying polymer concrete by adding crystalline internal membrane admixtures by the ratio of (1 bag cement = 500gms crystalline admixtures ) making hunch surface 100mm x 100mm of floor & wall joint area. The surface to be cleaned free from oil grease,wax,dust and other barrier materials.The entire area applied primer as a base layer and over the top placing Fiber mesh & applied entire floor & around wall 1 ft area two coats of water based, UV resistant Elastomeric PU liquid membrane waterproofing coating with required time intervals by using brand ShaliUrethane-BTD.Dilute ShaliUrethane® BTD with water @ 1:1 ratio and use as primer @ 400 gm / m².Apply 1st coat of ShaliUrethane® BTD @ 1 kg (or 0.8 kg) / m² by brush / roller / airless spray while the primed surface is tacky. For faster and smoother application, apply with airless gun. Spread Non-woven Geo-textile fabric or Fiber Glass Tissue / scrimp of 45 GSM with overlaps of 50 mm in both directions when the surface is still tacky; this is optional, to be assessed as per site requirements to achieve higher mechanical properties. Apply 2nd coat of ShaliUrethane® BTD @ 1 kg (or 0.8 kg) / m² by brush / roller / airless spray for final DFT of 1200 micron in two coats (for 1000 microns DFT apply 0.825 kg / m² / coat) complete all as specified and directed.

Preparation of two coats of synthetic enamel paint over one coat of red oxide primer on new steel surfaces of any description, over 10cm in width or girth,not otherwise described.

Taking down ceiling fan and exhaust fan, removing fans and blades to E/M store for keeping in safe custody complete all as specifed and directed.

Taking down Geyser complete and handover to E/M store for keeping in safe custody, complete all as specifed and directed.

Taking down copper/ aluminium point wiring (light, fan, socket or power) complete fittings such as switches, sockets, ceiling rose, pendents, regulators including light fitting any type etc complete as ordered and removing retrieved materials and making good the disturbed surface of wall, floors, ceiling etc. complete all as specified and directed.

M&L Point wiring complete with 1.50 sqmm single core PVC FRLS insulated un-sheathed 1100 volts grade copper conductor single core multi stranded drawn through with and including non metallic rigid PVC conduit accessories concealed on walls, surface on ceiling etc., with suitable clamps/ saddles, including provision of 1.6 mm thick MS pressed steel terminal boxes concealed in wall with 3 mm thick hylam sheet for housing switiches, sockets, fan regulators etc., including one run of 1.50 sqmm PVC insulated copper conductor for continous earth wire and connected to common earth dolly for one light point controlled by one switch.

All as per item No 116 but one light point controlled by two, 2 way switches complete all as specified and directed.

All as per item No 116 but one ceiling fan/ exhaust fan point controlled by one switch complete all as specified and directed.

All as per item No 116 but one socket point on same board with other switches complete all as specified and directed.

All as per item No 116 but one socket point on Independent board complete all as specified and directed.

All as per item No 116 but one call bell point controlled by one bell push complete all as specified and directed.

All as per item No 116 but for one 3/5 pin socket outlet 15 Amps independent with cable 2.5 Sqmm size complete all as specified and directed.

M & L switch piano, flush type, single pole one way 5 Amp complete all as specified and directed.

S&F switch piano flush type, single pole 2 way.5 Amp complete all as specified and directed.

S & F socket out let 2 in 1, 3 pin, 5 amps 240 volts flush type complete all as specified and directed.

S & F switch piano, flush type single pole one way 15 Amp, complete all as specified and directed.

M & L Socket out let 2 in 1, 3 pin, 15 Amp flush type complete all as specified and directed.

M&L Bell push 5 Amps 230 Volts complete all as specified and directed.

M&L call bell 230 volts single pole AC fancy type Ding Dong bell and including taking out unserviceable old bell complete all as specified and directed.

M&L ceiling rose surface PVC insulated three plates "JUMBO' type 240 volts complete all as specified and directed.

M&L switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type 240 volts universal, complete all as specified and directed.

S & F stepped type electronic fan regulator flush type complete all as specified and directed.

M & L angle lamp holder, PVC/ Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F LED Lamp 5W complete all as specified and directed. Make:Havells Cat Part No-LHLDEUEEMC8R005 or equivalent

S & F wall mounted light fitting LED batten, extruded aluminium heat shrink provided for efficient heat dissipation & integrated electronic driver with 20 W LED 6500K (4 ft) lamp including disconnecting, removing existing fitting and connecting into electric circuit and testing complete all as specified and directed by Engineer- in- charge. Make: Havells Cat part No. LUMILINE PLUS +BS20WLED865SPCSS or Equivalent make of Philips/Crompton .

S & F LED light fitting 1x10w bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F Decorative LED wall light fitting made up of high grade engineering plastic material including LED lamp 9 watts complete all as specified and directed. Make : Havells Cat Part No: LHFHCHE1TL1W020 or equivalent

S & F surface and wall mounted 10 Watt LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & intergrated electronic driver including LED lamp including testing complete all as specified and directed by Engineer- in- charge. Make19-09-2024all as per Havells Cat No. LUMILINE PLUS BS10WLED865SPCSSIND or equivalent make in Philips/ Crompton

S&F LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

S&F GI Bracket bend to shape in cold or hot 25 mm bore medium grade and 1.50 M long with suitable MS clamps and nuts bolts etc, for fixing security light fittings to bldgs complete all as specified and directed.

S&F ceiling fan complete with blades, down rods, remote and accessories, 230 V, 1200 mm sweep, min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

S&F electric water heater, storage type and heating element upto 2 KW capacity 25 litre, BEE 5 star rated complete with all accessories such as safety valve, thermostat, NRV, including grouted with suitable size of nut & bolts, making good the surface, including hot water and cold water PVC connection complete all as specified and directed.

S&F exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, copper winding of sweep 250mm and connecting including making suitable holes on wall and provision of cable 3 core of 0 .5 sqmm from ceiling rose to fan complete all as specified and directed.

S&F exhaust fan, steel body AC single phase 230V of size 300mm sweep with blades and frame and louvers complete all as specified and directed.

Taking down the existing unserviceable Main switch/ MCB DB from its position for fixing of new DB and making good the disturbed surface complete all as specified and directed by Engr-in-Charge.

S&F sheet metal enclosure VTPN with MCCB incomer DB, 4 way double door with suitable busbar for provn of MCCB / Isolator complete all as specified and directed. Make : Havells Cat No :DHDLVDOBGSFEO4 or equivalent

S&F 63 A MCCB 415 V,16 KA, 4 Pole fixed type complete all as specified and directed.

S&F MCB Single pole 6-32 amps, 'C' Curve, 10 KA, 240V complete all as specified and directed.

M&L for earthing complete with GI plate electrode 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of plate not less than 1.5m below ground level connected to earth wire 4.0 mm GI strip means of bolts, nuts, washers of galvanized all as shown in electrical plate No.3 of SSR Part-I including necessary excavation and earth work PCC 1:3:6 type C1 chamber, RCC cover in 50mm thick 1:2:4 type B1 with 8mm CTD 140mm centre to centre with suitable handle, watering pipe 20mm dia light grade pipe with funnel, charcoal salt connected to earthing test point including testing and commissioning on completion complete all as specified and directed. Note : The GI wire 4.0 mm and GI earth protection pipe 15 mm upto 7.5 mtr length is deemed included in the unit rate.

Disconnecting, removing carefully 5 nos electronic meter from existing meter box and refixing the same with provision of Hylam sheet size of 900 x 600 x 6 mm for fixing the retrieved meters on the existing meter box complete all as specified and directed. Note : The rate deemed to be include suitable wires for connecting meters to DB.

DANUSH INTERIORS AND CONTRACTORS (BID ID -3129449)

power links (BID ID -3132784)