Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.4 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹32.1 L+₹3.8 L (13.4%)Rejected-Finance C O SECTOR 02 HOUSING COLONY CHANNI HIMMAT JAMMU J K PIN 180015 | JAMMU | JAMMU AND KASHMIR | 180015 | L2 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 3 | L3₹33.6 L+₹5.3 L (18.8%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 4 | L4₹35.5 L+₹7.2 L (25.3%)Rejected-Finance 0 PUKHTA BAZAR JAHANGIRABAD RURAL BULANDSHAHR UTTAR PRADESH 203394 | BULANDSHAHR | UTTAR PRADESH | 203394 | L4 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 5 | L5₹36.3 L+₹8.0 L (28.2%)Rejected-Finance | L5 | Rejected-Finance OTHER THAN LOWEST BIDDER |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
4 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NAGROTA
GE NAGROTA
CERATIN MAINT WORKS AT NAGROTA AND TRANSIT CAMP JAMMU UNDER GE NAGROTA
2024_MES_640911_1
GEN-8577/E8
Open Tender
Civil Works
Item Rate
270 days
NAGROTA
CLASS D CATEGORY a i
8 documents required · 8 mandatory
₹500
GE NAGROTA
₹98,000
Yes
11 Mar 2024
6 Feb 2024
6 Mar 2024
6 Feb 2024
4 Mar 2024
20 Feb 2024
Amount
SCHEDULE A PART I S & F in repairs,Fancy type Bib tap, cast copper alloy with crutch or butterfly handle 15mm bore screwed down, screwed for iron pipe or for brass ferrule (ISI marked) or equivalent as approved complete all as specified
S & F in repairs,Bib tap15 mm standard of PTMT any colour screwed for iron pipe (Minimum weight 90 grams) complete all as specified
S & F in repairs,20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 210 grams.) complete all as specified
Rotational moulded polyethylene (three layer) water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position of capacity 500 litres all as specified in SSR Part-I. complete all as specified
All as per item No -4 here in before but 1000 litres.
S & F in repairs,15mm bore pillar taps (ISI marked), fancy type cast copper alloy with capstan head chromium plated screwed down high pressure complete all as specified
S & F in repairs,15mm bore CP brass angle stop valve/cock fancy type with long shanks and cup (concealed type) (ISI marked) complete all as specified
S & F in repairs,Waste coupling brass, chromium plated for wash hand basin with long screwed shanks and fly nuts fixed in repair 40mm bore. complete all as specified
S & F in repairs,32 mm bore PVC waste pipe flexible including PVC waste coupling with minimum length 800mm, PRAYAG (standard range) or equivalent as approved complete all as specified
S & F in repairs,PVC valve less symphonic action type, flushing cistern, low level, white of capacity 10 ltrs with inlet , ball valve, float and and fixing arrangement complete all as specified
S & F in repairs,Wash basins, vitreous china white (flat back or angle back type) of size 550x400 mm , excluding taps, waste chain and plug and porcelain stopper but including brackets and 32mm dia waste fittings brass chromium plated with long screwed shanks and fly nuts, 32mm x 600mm long PVC waste pipe complete flange end bedded in red lead cement and other end fixed as in repair complete all as specified and directed
M&L for Vitreous china wash down closet pan (Pedestal pattern) white with ‘S’&'P' trap plastic seat cover white including connection to out going pipe & to flushing pipe, anti syphonage pipe etc including making good to floor and fixing in repair complete all as specified and directed by Engineer-in-charge
S & F in repairs,Plastic water closet seat cover, white closed pattern with flat bottom and cover and Brass chromium plated hinging device. complete all as specified
S & F in repairs,125 mm dia Fancy type shower rose with arm swivel type fixed to 15mm dia pipe all as spd.
15mm bore galvanized steel water tubing medium grade with all GI fittings (as union, tee, socket, nipple, elbow) including taking out old unserviceable pipes by cutting, screwing and altering the old pipe lines if any required at site including cutting chase, fixed in walls, ceiling and laid in floors complete all as specified and directed
All as per item No 16 here in before but 20mm bore
S & F in repairs, Mild steel Helical door springs including roller plate complete of 150mm long complete all as specified
S & F in repairs, Floor door stopper 150MM of aluminium alloy body and tongue anodized with double rubbercomplete all as specified
M & L for, Galvanised mild steel wire cloth 0.457mm nominal dia of wire and average width of aperture 1.18mm and fixed with wooden/MS beads
Taking up or down 15mm bore steel tubing and connection including cleaning for refixing or removel to store.complete all as specified
S & F 15 mm dia GI tubing medium grade with all fittings and fixed complete to walls or laid in floors.complete all as specified
Cutting chases, pinning in, making good to facing where rerquired and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels,etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exceeding 10 cm girth in brick walls
Taking up or down 20mm bore steel tubing and connection including cleaning for refixing or removel to store.
S & F 20mm dia GI tubing medium grade with all fittings and fixed complete to walls or laid in floors.complete all as specified
S&F in repairs Grating down 100 mm dia of PTMT 9 minimum weight 25 gram.complete all as specified
S&F in repairs 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified .
S & F in repair stop valve15mm bore cast copper alloy fancy type chromonium plated , cup screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions.
S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes, single socketed in any length with rubber ring joints laid in walls floors or trenches, etc including necessary excavation & earth work whenever required complete as specified.
S & F 75 mm bore PVC (SWR) bends any radius.complete all as specified
S&F Cast Iron soil Waste and Vent pipe in any length with or without ears with cement joints laid in in floors/wall of 100mm bore all as specified complete all as specified and fixed in repair complete all as specified
All as pe item above but fixed to floor/wall of 75mm bore pipe
Bends ( any radius ) with duck foot or heal rest for 100 mm bore pipe fixed in repair including taking out old fittings complete all as specified.
All as per srl item No above but 75mm bore pipe
M&L for 75mm dia cast iron Nahani Trap, with grating including jointing to waste pipe fixed in concrete type B1(1:2:4)
S & F 100 mm bore PVC (SWR) bends any radius complete all as specified .
Demolition of Concrete (Unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as spd and directed
M & L for 25 mm thick PCC 1:2:4 type B-0 (12.5 mm graded crushed stone aggregate) as a sub base to receive topping layer finished even and rough
S&F Non-skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.11sqm but n exc 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or beddding layer of CM 1:4 including complete all as spd and directed.
M&L for joint free non skid cereamic coloured tiles 7 to 8mm thick (square/ rectangle) area of each tiles exceeding 0.18 sqm but n. exc.0.38sqm, in floor etc set and joined in neat cement slurry and pointed in white or .coloured cement to match over 15 mm thick screed bed or beddding layer of CM 1:4 including complete all as specified and directed.
Glazed ceramic tiles coloured (Premier quality) in vertical surface of size 300mm x450 mm x 7mm thick jointing in neat cement slurry and pointing in colour cement to match including incl 10mm thick screed bed/bedding layers in cm 1:4 complete all as specified
M & L for 25 mm dia aluminium anodised dreproy rod powder coated teak wood textured finish and wall thickness 1mm complete designed and patterned as approved by Engr-In-Charge
S&F in repairs, CP brass mixer pillar cock 15mm bore with 02 Nos PVC connection complete all as specified
S&F in repairs, CP brass mixure for cold and hot water screwed down 15mm borecomplete all as specified
S & F in repairs, PVC cover/lid for PVC over head water tank suitable for capacity of above 500 ltrs and upto 1000 ltrs capacity
Attending complaint for repair to easing of any type of Doors/window/cup board shutters incl Alu doors by tightening of hinges/handles/aldrop bolt/tower bolt/knobs, hasp and staple etc of any size/ any number of panels for easy closing/opening or changing the position of hinges, adjustments of tower bolts, sliding bolts, replacement of looking mirror, curtain rod etc complete including replacement of minimum defective item if required, complete all as specified and directed by Engr-in-Charge.
M&L for Petty repair to existing steel window/rolling shutters, pressed steel frame rat tails spring, steel almirah, mortise lock fitted in steel almirah and fixing wire mesh on steel windows by welding in situation and in any floor and including hinges 100mm medium weight to chowkhats after taking down door/window shutter and refixing in position and making functional (welding rod welding machine, small fittings such as windows handle, hinges etc will be provided by the contractor removing the steel window shutters from the frame and re-fixing after making serviceable complete in IHQ Camp and DGIS Area complete all as specified and directed by Engr-in-Charge.
Attending complaints related to plumber/ water supply and obtaining completion from user, this includes minor repair of taps by replacement of washer/jumpers, tightening of taps, tightening of check nuts of PVC connection and making water supply functional in case of blockage, redressing of GI pipe joints if any leakage is found, repair of unfunctional PVC flushing cistern, repair/ replacement of face mohra etc including materials like GI fittings of reqd size M.Seal, safeda, sootar and washers etc, (Replacement of taps, PVC connections/ face mohra's of any description & any other material shall be paid separately as supply only.)
Demolition of brick work or stone masonry, built in CM including all quoins, arches, pillars etc. but excluding ashlar facing, dressed stone work and precast concrete articles.complete all as specified
M&L for Brick work with sub class B (old size) brick straight or curved on plan exc 6 m mean radius in CM 1:4 complete all as specified.
M&L for Brick work with sub class “B” bricks straight or curved on plan exc 6M mean radius build in CM 1:6 using all as specified using old size bricks complete all as specified
M&L for Rendering 15mm thick cement plaster in CM 1:4 on faces of brick work with or conctete finished even and smooth without using extra cement all as specified.
M&L for Preparation of surfaces new plastered surfaces of wall incl and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed by Engineer-in-charge.
Taking down cement plaster on brick or stone wall etc including racking out joints, hacking for key scrubbing down with water etc to receive new plaster etc.complete all as specified
M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement all as specified
M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement all as specified ( internally)
M&L rendering 10 mm thick on internal surfaces of wall in cement mortar 1:6 finished even & smooth without using extra cement as specified and directed.
M & L preparing new plastered surfaces of ceiling chajjas facia etc. and applying three coats of white wash . complete all as specified
Preparation of newly plastered surfces of walls and applying two coats of oil bound distemper over a coat of wall care putty 3mm thick complete all as specified
M&L for Preparation of Complete removal of existing trreatment preparing old plastered surfces of wall and applying One coats of cement base paint over a coat of wall care putty 3mm thick complete all as specified
M&L for Preparation of newly plastered surfces of walls and applying two coats of Cement Base Paint over a coat of primer complete all as spd and as directed
M&L for Preparation of old decorated plastered or unplastered surfaces of walls by brooming down or by steel wire brushes, scraping down smoke spot, moulds, moss and efflorescent salts, trading oil, greasy spots etc and applying two coat of cement base paint over a primer on walls. after filling any hole with putty complete all as specified
M&L for Preparation of Complete removal of existing trreatment preparingold plastered surfces of walls and applying two coats of Cement Base Paint over a coat of primer complete all as spd and as directed
M & L for complete removal of existing trreatment preparing old plastered surfaces of walls and applying Finishing of wall with acrylic smooth exterior paint of required paint of required shade new work (two or more coat applied @ 1.67ltr/10Sqm and including priming coat of exterior primer applied @ 2.2 Kg/10 Sqm). complete all as specified
M&L for Preparation of old decorated plastered or unplastered surface including complete removal by brooming down with steel wire brushing, scraping down smoke soot, moulded, moss, efflorscent salt, trading oil and greasy spots and applying Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm on walls over 2mm thick plaster of paris putty as specified and directed by Engr-in-Charge.
M&L for Preparing of Old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-charge.
M&L for Preparing of New or previously painted wooden surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of primer complete all as specified and directed by Engineer-in-charge.
Supply and fixing PVC bath room mirror cabinet fixed to wall with screw and rawl plugs, fixed as in repair complete all as specified and directed .
Supply and fixing Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.
M&L for Repairing of old chromium plated bib taps, pillar taps, wash hand basin mixture, stop cock, angle valve, concealed stop cock and similar items by changing its brass phases and making it functional to the entire satisfaction of user and Engineer-in-Charge complete all as directed at site
Taking down existing old tarfelt, bituminous compound including cleaning & removing debris to a distance exc 100 m n.exc.250m. complete all as specified
M&L for 10 mm rendering in CM 1:4 including water proofing compound @2% of cement over roof surfaces finished even and smooth without using extra cement complete all as specified Note:- WPC Mesured and Paid Separately.
Supplied only for Integral water proofing compound.
M&L for Applying bituminous primer @ 0.40 litre per Sqm over plastered surfaces of roof including parapet surfaces
M&L for Applying evenly a tack coat of induatrial bitumen 85/25 grade @ 1.2 Kg/Sqm.
M&L for One layer of APP based polymeric membrane of approved manufacturer, 3mm thick, weight not less than 3.50 Kgs per Sqm , reinforced with non woven polyester fabric or weight not less than 150 gms per Sqm . Polymeric membrane shall be taken to a height 60 cm (minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing(Note (i) Laying of APP based polymeric membrane shall be done by torch on method or as per manufacturers instructions (ii) A Minimum overlap of 100 mm and 75 mm should be made in the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as manufacturers instructions (iii) The make of polymeric membrane shall be IWL India Ltd chennai. Ltd or "MOPLY FP" of Texsa India Ltd). NOTE : S&F of APP based polimeric membrane of approved manufacturer will be laid/fixed by authorised person of the same manufacturers units asper relevent IS.
Applying one coat of aluminium paint on top of APP membrane.complete all as specified
S&F 110mm dia PVC pipe single socketed in any length with rubber ring joints, fixed to walll and in trenches or in floors, fixed in repairs.complete all as specified
S&F in repairs Stack clamps out of 50mm by 5mm flat iron & 16mm dia round iron stays, including bolts & nuts & securing ends of stay to wall or roof for 100 mm bore complete all as specified
M & L for Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, et Exc 250 and n exc 500 ltr.complete all as specified
M & L for Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, et Exc 500and n exc 1000 ltr.complete all as specified
M&L for PCC 1:2:4 type B-0 (12.50mm graded aggregate) as in padding finished even and smooth without using extra cement all as specified and directed.
Taking down chowkats or frames exceeding n.exc. 1.5 Sqm each with shutters (without taking off shutters from the frames) all as specified and directed
Taking down shutters of any description exc 1.00 Sqm and not exc 2.00 Sqm each all as specified and directed
Taking down chowkats or frames exceeding 1.5 Sqm and n.exc 4.00 sqm each with shutters (without taking off shutters from the frames) all as specified and directed
S & F 35mm thick plain framed panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12mm veneered board with commercial veneering on both faces. The size of rail and stile as per IS -1003 (Part-I) klin seasoned and chemically pressure treated complete all as spd and directed (2nd class hard wood rail and stile) complete all as specified
S & F 35mm thick glazed & skeleton shutters of 2nd class hard wood, open rebated and prepared to receive glass gauge etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as spd in SSR Part-I section 8 clause 8.2 (A) complete all as specified
S&F Pressed steel frames factory made for doors out of 1.25mm thick PBI sheet with one of more rebates including necessary flat iron lugs, hinges, lock strike plate, hinges etc complete, size of frame 125x60mm complete all as specified and directed
S&F Pressed steel frames factory made for doors out of 1.25mm thick PBI sheet with one of more rebates including necessary flat iron lugs, hinges, lock strike plate, hinges etc complete, size of frame 105x60mm complete all as specified and directed
S&F Aluminum anodized barrel tower bolt extruded section 150mm long complete all as specified
S&F 300 mm long aluminum alloy, anodized, sliding door bolt with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded section & fixing blots & sliding bolts of extruded section or cast aluminum alloy & fixed
S & F in Aluminum anodized handles fabricated type of 150mm long all as specified.
S& F Box type Steel window side hung double shutters with provision for desert cooler/AC(inside for wire mesh & out side for glass), including guard bar,hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded and fixed, steel window shall be conforming to relevant IS complete all as shown on drawing No CEUZ/TD/1302/09, Sh 1/3 to 3/3 complete all as specified Note:- Wire mesh and sheet glass shall be measured and paid separately
S & F Box type Steel ventilators top hung double shutters (inside for wire mesh & out side for glass), including hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded including a coat of red oxide after preparation of surface before fixing.Steel window shall be conforming to relevant IS all as specified. Note:- Wire mesh and sheet glass shall be measured and paid separately
M & L for, Preparing of new untreated steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed by Engineer-in-charge.
S&F 18/19 mm thick solid PVC board, as in cupboard shutters, partition walls and shelves fixed with frame complete all as specified and directed.
Supply fabricate & fix in position anodised aluminium powder coated (minimum thickness of powder coating 50 micron) door shutter with frame, partly glazed with 5 mm thick tinted glass and partly panelled with 9 mm thick prelaminated particle board with both side decorative laminated including rubber bead joining cleat for fixing in position, aluminium door handle 150 mm size, aluminium barrel tower bolt 200 mm size etc including taking down or and making good of disturbed surface all as specified below complete all as specified and directed. (a) Frame (top & side) section shall of size 101.60 x 44.75 x 2.4 mm ( Section No 14021) (b) Vertical Members of shutter Section shall be be of size 85.00 x 44.45 x 2.00 mm (Section No 19560) (c) Top Members of shutter Section shall be be of size 83.50 x 44.45 x 2.00 mm (Section No 19581) (d) Lock rail (Middle member) of shutter Section shall be be of size 150.00 x 44.45 x 3.00 mm (Section No 19596) (e) Bottom Members of shutter Section shall be be of size 150.00 x 44.45 x 3.10 mm (Section No 19584) (f) Glazing clip for securing glass of shutters shall be be of 0.80 mm thick (Section No 19370).
M/L 75 mm thick Cement concrete type B2, 1:2:4 (using 40 mm graded granite stone aggregate) in base of flooring/ hard standing finished evern & smooth w/o using extra cement..complete all as specified
M & L for 20mm thick screed screed bedding in cement mortar 1:4 as in sub base.complete all as specified
M&L for Chequered cement concrete tiles glossy finish coloured 20 to 22 mm thick of any size and pattern as approved by GE as in patches in floor with set & jointed in neat cement slurry and pointed in coloured cement to match the tiles laid over.complete all as specified
M&L for Preparation of surfaces incl brooming down or steel wire brushing scrapping down smoke soot, moulds, moss and efflorescent salts over all decorated plastered or un plastered surfaces of wall incl cornices etc and applying one coat of white wash upto four storie build complete all as specified and directed by Engineer-in-charge.
All as per item No 103 here in before but applying two coats of white washing
All as per item No 103 here in before but applying one coats of white washing on ceiling.
All as per srl item No 103 here in before but applying one coat of cement base paint on walls.
All as per srl item No 103 here in before but applying two coat of cement base paint on walls.
All as per srl item No 103 here in before but applying one coat of oil bound distemper on wall.
All as per srl item No 103 here in before but applying two coat of oil bound distemper on wall.
M&L for Complete removal of existing treatment from external surfaces (any number of coats) of walls by steel wire brushing and washing rubbing down and stopping of surface holes and cracks using necessary filling compound of white cement and fine sand in the ratio of 1:3 to obtain smooth regular/even finish using sand paper and applying 2 to 3 mm thick wall putty and one coat of primer and two coats of oil emulsion distemper white or tined on wall upto three storie building complete all as specified. Note:- Shade of the OBD shall be approved by GE.
Preparing of previously painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-charge.
M &L applying Painting lines, dashes, arrows, letters, etc. on roads, pavements and the like exc 10cm wide with road marking paint, white or golden yellow.complete all as specified
M&L rendering 5mm thick in cm (1:3)as in ceiling , soffit of chajja etc.complete all as specified.
Preparation of Complete removal of existing trreatment preparing old plastered surfaces of Ceiling and applying two coats of oil bound distemper over a coat of wall care putty 3mm thick complete all as specified
S & F solid PVC door frames of sizes 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube complete all as specified and as directed.
S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail and bottom rail on either side and as gap insert for top rail and bottom rail , panelling of plain colour PVC sheet to be fitted in the MS framewelded/ sealed to the stiles and rails with suitable PVC sheet beading , and jointed together with solvent cement in the frame at site as per specification.complete all as specified
S & F in repair 3mm thick sheet glass, ordinary qaulity,in sqaures n exc 0.5 sqm each panes etc all as specified.
S&F 75mm long aluminium anodised barrel tower bolt of extruded section and fixed.complete all as specified
S&F 100mm mild steel butt hinges, medium weight, cold rolled and fixed. complete all as specified
S&F 75mm mild steel butt hinges, medium weight, cold rolled and fixed.
S&F 100mm long aluminium handles cast type, anodised and fitted.complete all as specified
S&F 300mm long ordinary MS rat tail rod pattern springs incl roller and roller plate complete.
S&F in repair harrison rails, mild steel, chromium plated with fixing brackets, stops, roller etc complete all as specified
Demolition of PCC a sin ground floors and paving (below or above ground floor)complete all as specified
M/L 100 mm thick Cement concrete type B2, 1:2:4 (using 40 mm graded granite stone aggregate) in base of flooring/ hard standing finished evern & smooth w/o using extra cement..
S&F Anodised aluminium frame for door section/ window section/ ventilator section for sliding type shutter/fixed type shutter in two or more tracks, including automatic locking handle , rollers and roller plate & fitting arrangement complete all as all as specified and directed by Engineer-in-charge.(Glass pane , hydraulic door closer , plush plate, floor hinges shall be measured and paid separately.
S&F Toughed glass 12 mm thick as in hinged doors, partitions automatic doors, fixed window and similar work and glazing fixed with aluminium section in squares including cutting to shape, drilling holes as required in each pane complete all as specified
Dismantling Plain or Corrugated steel sheeting, any guge, thickness in roof covering and removing from site of work complete all as specified
Dismantling wrought iron or mild steel work of any description not other wise provided complete all as specified and as directed.
S/F mild steel trusses (framed) purlins, rafters, crane gantries, rails and fastenings and heavy brackets framing (Beam,tee,angle,channel or flat sections)including distance pieces, cleats etc conforming to Fe-410-W Gde- E- 250 (qualaity B) all as directed and specified by Engr-in-Charge
S&F for wind ties for roof 30x5mm thick including securingbolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165.complete all as specified
S& F 0.50mm thick Pre painted galvalume alluminium zinc coating GI based corrugated steel sheeting with colour having tensile strength 550Mpa as in roof covering /Cladding to wall fixed with self tapping screws as specified. and 15cm end lap fixed with'L' type or 'J' type hook bolt (08mm dia) complete all as specified and as directed
S& F 0.50mm thick Pre painted galvalume alluminium zinc coating GI based Plain steel sheeting with colour having tensile strength 550Mpa as in roof covering /Cladding to wall fixed with self tapping screws as specified. and 15cm end lap fixed with'L' type or 'J' type hook bolt (08mm dia) complete all as specified
Dismantling of Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets.complete all as specified
S & F 5mm thick Printed PVC sheet used instead of plain colour PVC shectplain colour PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site.complete all as specified
S&F Aluminium anodized snap grid (powder coated) frame work of grid size 605x605mm including hangers 6mm dia GI (upto 1200mm long) for false ceiling including notching and preparing holes, including aluminium cleat/corner pieces and GI 4mm dia suspenders with utterfly clips, wall angle of size 24 x 24mm, main runner (teee) of size 24 x 38mm, cross tee of size 24 x 28mm, (No of suspenders shall be decided by the GE as per actual size requirement) including 6mm thick fibre cement plain builiding boards fixed to aluminum snap grid and providing two coats of white wash including preparation of surfaces including dismantling wall and ceiling board, any thickness includiing cover fillets if any complete all as specified
M & L 75mm thick PCC 1:3:6 Type B2 ( 40 mm graded aggregsate) as in subbase and pavings etc complete all as specified
M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified
M&L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness with grey cement and pigment, M-40 Grade etc complete all as specified
Taking down carefully unserviceable Aluminium point wiring complete (light, fan socket, bell or power) with fitting such as switches, ceiling rose lamp holder, regulators, sockets, light fittings etc. and keeping in safe custedy for taking credit all as specified and as directed
SCHEDULE A PART II Taking down ceiling fan any sweep, removing blades ,cleaning the fan completely for dust and dirt and hanging the same back to its original positions including connecting with three core flexible copper wire to ceiling rose etc after the completion of the point wiring including replacement of old unserviceable fan hook, rubber pad, nut bolts and washers etc, complete, all as specified and directed by Engr-In-Charge.
M&L for Concealed Point wiring using FRLSH PVC insulated unsheathed multi strand copper conductor cable 1100 volt garde 1.5 sqmm including 1.5 Sqmm FRLSH PVC insulated unsheathed multi strand copper conductor earth wire drawnIN and including PVC conduit medium grade ISI marked not less than 20 mm dia concealed in wall & surface on ceiling with all conduit fittings etc terminated in and incl concealed pressed steel sunken box readily available ( having wall thickness not less than 1.22 mm upto 200 x 300 mm box size & having wall thickness not less than 1.63 mm beyond 200 x 300 mm ) duly covered with 3 mm thick bakelite sheet cover for fixing switches , sockets , fan regulators etc incl testing and making good to disturbed surface to match existing surface for one light/fan/bell point complete all as specified and directed.
All as per Srl item N0 142 above but for one socket out let 5Amp controlled by one switch on same board with other switch .
All as per Srl item N0 142 above for one socket out let 5 Amp controlled by one switch on independent board with other switch .
All as per item No 142 above but point wiring with 2.5sqmm FRLS multi stranded copper conductor cable for main circuit and 2.5sqmm cable as earth continuity conductor for one 15Amp socket out let controlled by one 15Amp switch on independat board.
M&L for point wiring with PVC insulated unsheathed 1100 volt grade FRLS cable with multi stranded copper conductor of size 4.0 Sq mm (Nominal area) in wall and surface on ceiling with all conduit fittings & fixing acessories inculding sunken anodised pressed steel terminal box not less than 1.2mm thick covered with 3 mm thick plastic laminated sheet cover of suitable size with brass screws for mounting switches, sockets, regulators with and including 4.0 sqmm FRLS multi stranded copper conductor for controlled by two pin and earth plug and socket complete with one single pole MCB 20 amp 240V drawing as continuous earth wire connected to main earth and earth dolly complete all as specified.
S&F switch piano flush type 5 Amps single pole one way complete all as specified
S&F switch socket combination 2 in 1, 3 pin, 5 Amp flush type complete all as specified
S&F switch socket combination 2 in 1 5 pin 5 /15 Amps flush type complete all as specified
S&F of ceiling rose 3 terminal complete PVC/Polycarbonate isolated boly complete all as specified and directed.
S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc as required all as specified and directed.
S & F Modular snap switch SP one way 5/6 Amps suitable for 1 Module complete all as specified.
S & F Modular Bell push ,SP 5/6 A suitable for 1 Module complete all as specified.
S & F Modular socket 5 pin 5/6 Amps suitable for 2 Module complete all as specified.
S & F Modular snap switch SP one way 15/16 Amps suitable for 1 Module complete all as specified
S & F Modular socket 5/6 pin 15/16 Amps suitable for 2 Module complete all as specified.
S & F Modular Fan step Regulator electronic, 120 watts 2 Module complete all as specified.
S & F Modular white cover plate incl Modular base frame/boxes & powder coated Modular sheet metal concealed box for 6 module complete all as specified.
All as per Item No-158 above but 3 module complete all as specified.
All as per Item No-158 above but 2 module complete all as specified.
All as per Item No-158 above but 8 module complete all as specified.
All as per Item No-158 above but 12 module complete all as specified.
S & F Modular blanking plates 1 module complete all as specified.
M&L Integrel sleek extruded batten aluminium /CRCA channel fitting with LED 18 watt complete with all accessories and including connecting up with three core twisted flexible copper conductor cable with suitable size of 230V 50 Hz. complete all as specified Make Cat part no.112181 BLRB-DB 118 ( for batten fitting) & Cat part no. BLRB18W CW (for LED 18 watt ) or equivalent in approved make.
S&F baton integrated LED channel of 5W, 230V frequency 50/60 Hz integral sleek extruded polycarbonate LED channel with white acrylic cover, Power Factor not less then 0.9 complete all as specified Make Cat No BCLSB 05 WH of Bajaj or techno commercial equivalent in approved make.
M&L LED light fitting 1x9W bulk head luminaries IP 65 complete with all accessories including LED lamp 9 watt , connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V 50 Hz .complete all as specified
S&F decorative wall mounted luminaire with & including 9 Watt LED lamp complete all as specified Make Cat No of LHFHCHE1TL1W020 of Havells or equivalent in approved make.
S &F LED sleek surface round ceiling mounted decorative down light fitting with PC cover suitable for 1x12 watt complete all as specified Make Cat No BGSLO sleek surface 12 WH RD of Bajaj or equivalent in Havells / Polycab.complete all as specified
Supply and fixing in replacement of engaugement light red & green LED type built in PVC gang box complete including lamp complete all as specified
Supply and fixing swing type wall mounting fan 450 mm sweep single phase AC 230/240V complete for wall mounting incl grouting, holding down bolts, nuts, and provision of flexible copper conductor cable 3 core 23/0.0076 size from ceiling rose to fan. complete all as specified Make per model No Airboll Hi-speed of Havells and equivalent in Bajaj / CG.
Supply & fixing heavy duty PVC Exhaust fan 300 mm sweep single phase AC 230/240V complete with louvers complete all as specified
S&F Single pole & neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 amp 240V.complete all as specified
S&F white/ warm white powder coated CRCA housing with LEDs 36W, 230 V, 50 Hz Surface mounting LED 2 feet x 2 feet luminaries, Sweamless front frame with flat white hight transmission acrylic cover complete with all accessories including connecting up with twin core twisted flexible copper conductor cable with suitable size. Cat part no.BZSSQL 36W WH of Bajaj or equivalent in approved make.complete all as specified
S&F decorative wall mounted luminaire with & including 9 Watt LED lamp complete as per Cat No of LHFHCHE1TL1W020 of Havells or equivalent in approved make.complete all as specified
S &F LED sleek surface round ceiling mounted decorative down light fitting with PC cover suitable for 1x12 watt as per Cat No BGSLO sleek surface 12 WH RD of Bajaj or equivalent in Havells / Polycab.complete all as specified
S&F for lamp holder PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.
S&F for LED bulb 7 watt complete all as specified and directed.
S&F sheet metal enclosure distribution board SPN 12 way 230 V, 50 Hz double door with neutral, Earthing bar and din rail complete incl taking out existing UNSV DB with MCBs.complete all as specified
S&F sheet metal enclosure double door for distribution board factory made for MCB DB load link TPN 4 way suitable for MCCBas incomer, 125 Amp,4 pole. (when MCB's are to be used) with suitable size of busbar complete,fixed flush in wall including chases wall for fixing DB and making good the distributed wall surfaces to match with existing specification including taking down incl taking out of exsing UNSV DB with MCBs.complete all as specified
S&F MCB DP 63 Amps 10 KA 230 volts "C" series complete all as specified
S&F MCB single pole 5 to 32 Amps 10 KA 230 volts "C" series complete all as specified
S&F MCB single pole 40 Amps 10 KA 230 volts "C" series complete all as specified
S&F MCCB 125A 4Pole 16KA 415 Volt with fixed magnetic and fixed thermal setting complete all as specified
M&L for sub main wiring with two single core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 6 Sq mm drawing through and including concealed rigid non metallic PVC conduit medium grade ISI marked 20 mm dia including one single core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 6.0 sq mm as earth continuity conductor connected to commen earth and earth dolly complete incl taking out existing UNSV service connections.complete all as specified
M&L for Sub main wiring with two single core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 10 Sq mm drawing through and including concealed rigid non metallic PVC conduit medium grade ISI marked 25 mm dia including one single core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 10 sq mm as earth continuity conductor connected to commen earth and earth dolly complete all as specified
Supply and fixing wall mounted busbar chamber 415V, 3 Phase 4 wire, 50Hz AC supply system fabricated from stainless steel with 3mm thick for outer cell TPN aluminium busbar of cap 100 Amp 4 pole 8 ways complete all as specified and directed . Make : Havells cat part No : IHBC010008 or equivalent in approved make.
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core complete all as specified
M&L for earthing complete for bldg with galvanized mild steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters below ground level) with top edge of earth plate not less than 1.5 meters below ground level connected to galvanized earth wire 4.00 mm dia by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, PCC (concrete chamber of size 300 mm x 300 mm x 300 mm inside dimension) shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate with fair finish , internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire mesh of 22 gauge, 80 mm thick PCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with XPM, JALLI pit shall be filled with charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I (2009) as specified including provision of 15mm dia medium grade GI pipe for earth wire protection and 20 mm dia for watering complete , all excavation and earth work & connecting the earthing to an earthing test point / main switch board as specified and testing on completion complete all as specified
Taking down the water heater storage type of any make of any capacity. dismantling the water heater carefully from its position fixed on walls, reassembling the water heater after replacement of defective parts and reinstalling the water heaters to their original locations or as directed, commissioning and testing the water heater complete all as specified & directed Note: Any material/part found unserviceable during servicing shall be replaced by the contractor and measured and paid separately under respective items.
S&F in place of unsv PVC connection of any make with (ISI Mark) having10mm dia, 45 cm long with steel reinforcement suitable for hot water geyser outlet supply with 02 Nos of Unions/ cup shaped cover with washers complete all as specified & directed
S & F in replacement of unserviceable of PVC connection of any make with (ISI Mark) having 10mm dia, 45 cm long suitable for cold water geyser inlet with 02 Nos of Unions/ cup shaped PVC cover with washers complete all as specified & directed
S&F in place of unserviceable inlet /outlet assembly of any make of geyser having six/seven/eight /nine hole suitable for Bathwell/ Bajaj / pearl water heater of capacity 25/35/50 litre complete all as specified
S&F in place of unsv 4'' long and 1/2'' dia Chrome plated bolt with suitable washers complete all as specified
S&F in place of insulating material (glass wool) suitable for 25/35/50 litres capacity water heater, complete all as specified
S & F in replacement of unserviceable split bottom cover (two pieces) suitable for water heater of any capacity duly painted, complete all as specified.
S & F in replacement of unserviceable neon indicating lamp, rectangular /round as required at site, complete all as specified
S & F in replacement of unserviceable heating element 1.5 KW, single phase, 230 volt with triangular base suitable for 25/50 Ltr water heater. complete all as specified
S & F in replacement of unserviceable heating element 2.0 KW, single phase, 230 volt with triangular base suitable for 25/50 Ltr water heater. complete all as specified
S & F in replacement of unserviceable heating element 1.5 KW, single phase, 230 volt with round base suitable for 25/50 Ltr water heater. complete all as specified
S & F in replacement of unserviceable heating element 1.5 KW, single phase, 230 volt with round base suitable for 10 Ltr water heater. complete all as specified
S & F in replacement of unserviceable of thermostat switch range upto 80”C suitable for 25/50 ltrs cap water heater. complete all as specified
S & F in replacement of unserviceable of steel outer body 50 Ltrs capacity, any make complete all as specified
S&F in replacement of inner tank of 25/35 Ltrs capacity, any make all as directed by Engr-in-charge.
S & F in replacement of unserviceable of steel outer body 25/35 Ltrs capacity, any make all as directed by Engr-in-charge.
S & F in replacement of unserviceable electric cable copper conductor, 3 core 2.5 Sqmm with PVC insulation. complete all as specified
S & F in replacement of unserviceable plug top 3 pin 15 Amps complete all as specified
S & F in replacement of unserviceable safety nut for geyser of capacity 25/50 ltrs. complete all as specified
S & F in replacement of unserviceable sheet metal enclosure with socket plug top and MCB single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20Amp complete all as specified
M/S MANISHA BUILDERS
MAMTA ENTERPRISES
SUNIL AND CO
R.K. Works
Nitika electricals and engineers works
KRISHNA BUILDERS
Mahajan Auto Traders
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .