CA No GE/H/T-29/2025-26 NAME OF WORK COMPREHENSIVE MAINT OF ADC BLDG NO P-105 AT AHRR UNDER GE E/M RR HOSPITAL DELHI CANTT - 10.

Amount

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing tiles and rubbish off the premises complete all as specified.

M&L for dismantling stone slabs and tiles of any description or thickness in floors, aprons etc

Demolition of brick work built in cement mortar including all quoins, arches, pillars, drain and culvert in foul condition etc.complete all as specified and directed .

Demolition of cement concrete unreinforced( in ground floors and paving at any position 15 cm thickness (below or above ground level) complete all as specified and directed .

M & L for glazed ceramic coloured tiles 300X450mm/ 600x300x7 to 8 mm thick in dado/skirting set and jointed in neat cement slurry and pointed in coloured cement to match over 10mm thick rendering in CM 1:4 complete all as specified.

M & L Non skid coloured ceramic tiles 7-8 mm thick (sqm/rect) area of each tiles exc 0.11 sqm but n exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match over 15mm thick screed bed in CM 1:6 complete all as specified and directed .

M & L coloured ceramic tiles 7-8 mm thick (sqm/rect) area of each tiles exc 0.18 sqm but n exc 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match over 15mm thick screed bed in CM 1:6 complete all as specified and directed .

M & L Non skid coloured ceramic tiles 7-8 mm thick (sqm/rect) area of each tiles exc 0.06 sqm but n exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match over 15mm thick screed bed in CM 1:6 complete all as specified and directed .

M&L for vitrified tiles shade 8-9 mm thick (sqm/rect) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid incl over 15mm thick cement screed bed in CM 1:6 complete all as directed.

M & L for 16-18 mm thick granite of any type (table rubbed & polished) in jambs, pillars, window cills, plate forms in CM (1:4) including pointing in white cement (1:2) ,using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed .

M & L for 20-25mm thick, machine cut, Kota stone slab, as in floors, steps, landing etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of slab, including cutting, polishing etc. with and including 20mm thick screed bed in CM 1:6 complete all as specified.

Dismantling of wall and ceiling boards of any description, any thickness including cover fillets and frame work complete all as specified.

S & F solid PVC wall panelling consisting of 5mm thick wood grain finish PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified.

S & F PVC louvers thickness wall panelling any colour or pattern as approved of min size 16cm wide ,8mm-25mm overall thick and min 0.90mm wall thickness fixed including necessary fixing arrangement like fillate cleat back framing etc and side beadings as per specifications and manufacture instruction complete all as specified.

S & F for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.

S & F solid PVC leeping of 2mm thick wood grain finish PVC sheet is heat bent as lipping on the edges of doors, windows & other edges inclusive of solvent cement and fixing at site complete all as specified.

M&L for exposed GI frame/grid system duly powder coated for module size of 600 x 600 mm suitable for lay-in aluminium / mineral fibre ceiling tiles, having main T runner of 24 mm size, suspended at 1200mm C/C and cross T runner of 24 mm size, suspended at 600mm C/C with interlocking arrangements to form grid of 600 x 600mm, perimeter runner/channel of 15 mm size, main and cross T runner supported by 4mm dia GI rod from slab / Roof, wall angle etc with and including all fixing accessories and making good of distrubed wall surfaces with POP and one coat of oil emulsion distemper, as required to match the existing surfaces, complete all as directed.

M&L for Metal false ceiling, lay-in type, 0.5 mm thick, having tegular edge profile, duly powder coated, perforated type with glass fibre acoustic fleece, suitable for false ceiling grid/frame module of 595 x 595mm size, complete all as directed. (Note : The grid /frame shall be measured and paid for separetly.)

Taking down of chowkhat or frame with shutter( with out taking off shutters from the frame) n exc 1.50 of each compleete all as specified and directed.

Taking down chowkhat or frames with shutter (without taking off shutter from frame) area exc 1.50 Sqm but n. Exc. 4.00 sqm complete all as specified and directed .

Taking down of shutters only exc 1.00 sqm but n exc 2sqm of each compleete all as specified and directed.

S&F, aluminium powder coated chowkhats of 100x44x1.5mm section with rebate complete frame

S&F powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified all as specified and as directed. (Cost of sheet glass Plain / frosted / ACP Sheet shall be measured and paid seprately )

Supply only 5.5 mm thick plain glass fixed with beading in aluminium frame all as specified.

Supply only 3mm thick aluminium composite panel (ACP Sheet) to aluminium frame all as specified.

S&F aluminium powder coated glazed three track sliding window of frame 100 x 44 x 1.5mm and sliding shutter of section 40mm x 19mm including 3mm thick sheet glass, ordinary quality exceeding 0.5 Sqm in each pane, in two track shutter and in one track stainless steel wire cloth, 0.3mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, all fittings such as aluminium handle of size 125mm and locking arrangements with each moving leaf all as specified.

Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2 mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor including cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.)

S&F powder coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing not less than 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading screws etc complete all as specified and as directed. (Cost of sheet glass Plain/frosted shall be measured and paid separately).

Dismantling of boarding any description, fixed in any position with nails complete all as specified.

S&F aluminium partition wall of aluminium section 100mm x 44mm x 1.5mm thick frame rectangular section and panel of ACP sheet or prelaminated board in bottom panel and 5.5mm thick sheet glass in top panel with rubber lining and aluminium beading around length including necessary fixing arrangement for bottom and top member of aluminium frame in floor/PCC/Brick work as per site requirement with rawl plug etc, including chromium plated steel screws 60cm centre to centre all as specified and directed. (Note : Cost of ACP sheet or prelaminated board and sheet glass shall deemed to be included in the rate quoted for this item )

Providing and fixing aluminium composite panels cladding of approved make having total thickness of 4 mm (Top coil -0.5mm , non Toxic PE - Core - 3 mm and back Coil -0.50 mm ) with 25 micron PVdF Coating on top coil and polyester / epoxy coating on back coil ( 4-7 microns ) on aluminium substructure fixed with 19 mm x 12 mm x 1.6 mm aluminium cleat & 10 x 100 mm SS Wooden screw with PVC plug on faced horizontal/ vertical surfaces of rectangular / circular columns ,suspended ceiling Cills , jambs ,canopy with including neccessary aluminium frame ,scafolding etc and making 12 mm to 20 mm wide grooves and applying non staining and non streaking sealant of Dow corning ( 789 or 991 HP) and backing rods complete as specified and approved shade by Engr in charge . Only exposed surface shall be measured and paid for ACP Material shall be for exterior application &of shade as approved by Garrision Engineer .

S&F toughened glass frameless door with fixed portion, of 12 mm thickness, including cutting holes, edges rounded and etching works etc incl all kind of SS patch fitting & fixture, spider patch etc, (excluding handle, lock and floor spring) complete all as directed.

S&F in repair of stainless steel handle 450 mm long fixed to 12 mm thick toughned glass door with and including all fixing accessories i. e. bolt washer, adhesive etc, complete all as directed.

S&F of repair SS door lock, glass to glass type, suitable for 12 mm thick frameless toughned glass door with and incl all fixing accessories i. e. bolt, washer, screw, adhesive etc of suitable size, complete all as directed.

S&F in repair for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box,main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as directed.

S&F PVC 18/19mm thick PVC moulded solid board ,one side prelaminated for cabinets boxes shutters,etc with shelf and shutters full size fitted under/above kitchen cooking platform and other platform complete all as specified.

S&F 100 mm size stainless steel handles, matt finish, complete all as specified and directed ..

S&F brass two levers keys,Locks, cupboard,grade I, size 50mm suitable for cup board door/drawer , complete all as specified and directed .

Taking down cement plaster on brick or stone walls including racking out joints, hacking for key scrubbing down with water etc.

M&L for 15 mm thick rendering in cement mortar having ratio equivalent to CM 1:6 on brick work or concrete surfaces of wall and finished the surfaces even and fair as a whole or in patch work all as specified and directed.

M&L for preparation of newly plastered wall surface & applying two coats of distemper oil emulsion over a coat of 1-2mm thick wall care putty (Note: Applying emery paper to achieve smooth finish).

M&L for complete removal of existing treatment on walls surfaces and applying two coat of wall care putty 1-2mm thick and preparing the surface with fine emery paper to achieve smooth surface, complete all as specified and directed.

M&L for prepration of old plastered wall surface applying one coat of oil bound distemper with roller on old wall surfaces complete all as directed.

M&L for preparation of old wooden surfaces of any description over 10 cm width or girth, applying two coats of synthetic eanmel paint .complete all as specified and directed .

S & F in repair for door closer, Aluminium (die cast) body,hydraulically regulated, designation No. 3, unversal type suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to he stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain/coloured colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

S&F Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded coloured PVC coloured laminated Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing

S & F 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides with decorative or lamination face veneer on both faces with lipping/frame to match complete all as specified and directed ..

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size Frame size 65x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp?ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge. (Note: stainless steel butt hinges shall be paid separately)

S&F Stainless Steel butt hinges 100mm size complete all as specified and directed .

S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium complete all as specified and directed ..

S&F aluminium anodised barrel tower bolt 200mm long extruded section all complete all as specified and directed .

S&F 150mm size extruded aluminium handles fabricated type anodised complete all as specified and directed ..

S & F Solar control film 25micron reflective type sticked to glass panes exc. 1.5 sqm as per instruction of manufacturers complete all as specified.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., complete all as specified.

S & F 110mm dia PVC pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed to wall complete all as specified.

S & F 75mm dia PVC pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors incl taking down complete all as specified.

S&F PVC bend/shoes 110 mm dia fixed in position complete all as specified and directed ..

S&F PVC bend/shoes 75 mm dia fixed in position complete all as specified and directed ..

S&F 50 mm bore PVC pipe single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed .

S & F in repair stainless steel curtain rod 20-22mm dia including brackets, side knobs incl fittings fixed to wall complete all as specified and directed.

S&F in repair venatian blinds vertical type 100mm wide slats made out of fabric cloth of approved shade fixed as per the instructions of manufacturers, complete all as specified and directed .

S&F in repair zebra blinds made out of fabric cloth or as required of approved shade fixed as per the instructions of manufacturers, complete all as specified and directed .

Material & Labour for providing and fixing stainless steel (Grade 304) railing of any design/pattern made of hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories &stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed .

S&F in repair floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as directed.

M & L for RCC type B1 1 : 2 : 4 (using 20mm graged stone agg) work cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain fair finishes complete all as specified and directed .

M & L for Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, Chajjas hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed .

Fair finished flat form work to Chajjas, water troughs and similar items including edges complete all as specified and directed .

Fair finished flat form work to sides and soffits of floor or roof beams, lintels, cantilevers, shelves including supports etc.complete all as specified and directed .

M&L for brick work with sub class B bricks old size, straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed ..

M&L for brickwork with sub- class ‘B’ bricks old size, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

M&L for complete removal of existing treatment and applying 1-2mm thick putty to achieve even and fair surface followed by two coats of plastic emulsion paint complete all as specified and directed.

M&L PCC 1:5:10 type E-2 (using 40 mm graded stone aggregate) in sunken floor complete all as specified and directed .

M&L for rendering 15 mm thick in CM 1:4 on brick or concrete surfaces using integral water proofing compound (3% by weight) for floor and sides of wall complete all as specified and directed

M&L for sealing of pipe penetration of toilets core cutting & sunken slab atment in following stages:- Supply and apply solvent free,moisture insensitive epoxy resin based patch repair putty Sikagrade-694F (I) ,yield : 0.6ltr/kg suitable for submerged condition having compressive strength of 40N/mm2(1day) ccording to IS 9162-1979 on pipe penetration surface.The putty shall be applied to a groove thickness of minimum 20mm on pipe penetration joints to concrete etration of surface of sunken portion and M & L for glass fibre reinforced acrylic modified cementtitious coating system as Top coat : Sika Top Seal -107@ 1.5kg/m2 over reinforcement : Sika Fab-1 over base coat :Sika Top seal-107 @ 1.5kg/m2 etc all as specified and directed.System should have compressive strenght:20N/mm2: bond strength :2.0N/mm2 (ii)Waterproof Sealing arround perimeters & wall to floor junction with Sika® Seal Tape-S special tape ,made of thermoplastic elastomer reinforced with polyester woven fabric for waterproof sealing around perimeters and joints in wet tiled areas specially designed for wet room. complete all as specified. Note : Entire work shall be carried out through Manufacturer or this authorised representative.

M&L for 40 mm thick PCC 1:2:4 type B0 (Using 12.5mm graded stone aggregate) as in flooring with complete all as specified and directed .

Taking up or down tubing GI 15 mm dia incl all fittings complete all as specified

Ditto all as per item No. 80 above but 20 mm bore GI Pipe.

Supplying and laying of 15mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S&F 20mm dia GI pipe medium grade including all fittings fixed to wall or floor as specifide and directed.

M&L cutting chases, pinning in brick work making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed .

S&F in repairs gun metal, globe or gate valve with iron wheel, screwed both ends for iron pipe suitable for 15 mm bore iron pipe complete all as specified and directed.

S&F in repair vitreous china wash basin, white colour, flat back type, of approx size 580 x 450 mm including waste coupling, wall bracket, waste pipe of suitable size etc,complete all as specified and directed.

S&F in repair Vitreous China Urinal, half stall type, white (excluding flushing cistern, waste coupling, flush pipe and waste pipe) Urinal, bowl type or half stall pattern, basin only including connections to flushing pipe and outgoing pipes fixed in repairs etc,complete all as specified and directed .

S&F in repair Plastic water closet seat, white colour, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, all as specified and directed.

S&F in repair white colour, vitreous china washdown water closet pan (pedestal pattern) fancy type (excluding fixing bolts, flushing cistern and flush pipe), complete all as specified and directed ...

S&F in repair white colour, vitreous China squatting pan, ‘Orissa pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe), complete all as specified and directed .

S&F in repair 10 liters PVC valve less syphonic action type flushing cistern, low level white with inlet, ball valve, float and handle including bracket and flush pipe to squatt pattern closet including all joints and making good to the floor.complete all as specified and directed .

S&F in repairs 15 mm dia chromium plated shower rose 125 mm size with CP arms for shower complete all as specified and directed.

S&F in repair 15mm dia PVC connection 45 cm long, complete all as specified and directed .

S&F in repair long body bib cock, 15 mm bore with wall flange made of cast copper alloy, chromium plated, complete all as specified and directed .

S&F in repair fancy type Pillar taps 15 mm cast copper with capstan heads chromium plated screwd down high pressure with or with out lettred hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed.but fancy type complete all as specified and directed .

S&F in repair of wash basin mixer, without pop up waste system, long body, made of cast copper alloy, chromium plated fancy type, suitable for 15 mm bore pipe, complete all as specified and directed .

Supply and fixing in repair toilet paper holder chromium plated complete all as specified and directed .

S&F in repair of angular stop cock/ angle valve 15 mm bore with wall flange made of cast copper alloy, chromium plated fancy type, complete all as specified and directed ..

S&F in repair CP Towel Ring fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed .

S&F in repair of 2-in-1 wall mixer with provision for overhead Shower with 115mm long bend pipe on upperside,with built in non return valve connecting legs & wall flanges made of cast copper alloy, chromium plated fancy type, complete all as specified and directed .

S&F in repair of bottle trap 32 mm size with 250 mm long wall connection pipe and wall flange made of cast copper alloy, chromium plated fancy type, complete all as specified and directed ..

S&F in repair of two way bib cock suitable for 15 mm bore water pipe, with & including wall flange, made of cast copper alloy, chromium plated fancy type, complete all as specified and directed ..

S&F in repair of CP soap dish fixed in repairs complete all as specified and directed .

S&F in repair of 32mm dia and suitable length of PVC waste pipe including tail for WHB etc, complete all as specified and directed ..

S&F in repair of 40mm dia and suitable length of waste pipe including tail for Stainless Steel sink etc, complete all as specified and directed ..

S&F of SS glossy finish grating of 100 mm dia size with or without hole and including fixing with cement mortar to floor/nahani traps etc, complete all as specified and directed .

S&F in repair sinks with drainage board made of stainless steel 0.80mm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm complete all as specified and directed .

M & L in repairs for Cast iron floor trap of 75 mm outlet plain including jointing to waste pipe in run lead fixed in cement mortar complete all as specified and directed ..

S&F 100mm bore cast iron soil waste and vent pipes (sand cast pipes) in any length fixed with cement joints fixed to walls, complete all as specified and directed ..

S&F in repairs 100mm bore cast iron soil waste and vent pipe (sand cast pipes) in any length with or without ears fixed with cement joints laid in floors or in trenches complete all as specified and directed ..

S&F 75mm bore cast iron soil waste and vent pipe (sand cast pipes) in any length with or without ears with cement joints laid in floors complete all as specified and directed .

S&F for 75mm bore cast iron soil waste and vent pipes (sand cast pipes) in any length with cement joints fixed to walls, complete all as specified and directed ..

S&F for 100mm bore cast iron branch pieces, single (equal or unequal) ordinary or inverted (spigot or socket type) with parallel branches complete all as specified and directed .

S&F cast iron bends,Tee (any radius) diminishing pieces or tapers (larger bore measured) of 100mm bore of pipe fitted with oval access doors complete all as specified and directed ..

S&F cast iron 'P' trap or 'S' trap of 100mm size fixed with laid joints laid in floors, complete all as specified and directed ..

S & F of stack clamps made out flat iron and round iron stays, including bolts and nuts and securing ends of stays to wall or roof, complete all as specified and directed .

S & F in repair of Aluminium alloy wire cloth,0.36mm nominal dia of wire and average width of aperture1.40mm and fixed with aluminium wire staples complete all as specified and directed ..

S & F in repair stop/ angle valve cast copper alloy CP 15mm bore screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipes or for union all as directed and specified

S&F Glass wall corner with wall bracket and fixing accessories complete all as specified and as directed

S&F in repair Jet Spray (health Faucet) with 1M long flexible tube with wall hook Chrome Plated

M&L for wooden flooring, laminated wooden type made of high density fibre board (HDF), comprising of tongue and groove interlocking type of planks of 1210 x 193mm size 8mm thick, commercial grade, abrasion resistance of AC-III category, with and including all fixing material i.e chemical adhesive, base strip /fillets etc veneered and matching top beading etc all as directed.

Dismantling asbestos cement (corrugated, semicorrugated etc.) sheets in roof coverings etc complete all as specified and as directed.

Pre -painted galvanume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of colour having tensile strength of550 Mpa as in roof covering /clading to wall, fixed with self tappng screw as specifide and directed.

Dismantling mild steel work of any description not otherwise provided for, complete all as specified and directed.

Supply, fixing and fabrication steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240

M&L for Preparation of old surfaces plastered or unplastered and applying one coat of weather proof exterior paint upto & 3 storyed high building complete all as specified and directed.

S&F bloss glass frosted Paper Self-Adhesive Window Film Shower Waterproof glass Covering(17.7" Wide by 78.7" Long) for Privacy purpose complete all as specified and directed.

S&F in repair of CP waste jalli 100mm dia complete all as directed.

S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, width of flap 30mm when open.

S&F soft closing clip on hinge, full / half overlay type, of stainless steel suitable foe 18/19 mm thick board, complete all as specified and directed.

S&F 25-40mm dia, chromium finished knobs fixed with screws, complete all as specified and directed .

S&F hat and coat hooks, brass solid body, 175mm to 250 mm complete all as specified.

S&F telescopic type ball bearing slide & runner, suitable for drawers, complete all as directed.

S&F in repair stainless steel wall mounted support toilet grab bar vertical swing (400mm x 35mm) or foldable of size (605mm x 100mm x 35 mm dia) including fixing accessories complete all as specified and directed.

Mirror pollishing on kota stone/marbal where ever required to give high gloss finish complete all as directed by Engineer in charge. Note:-Complete work Grainding,Cleaning,washing as per Direction and site requirement.

S&F aluminium Deco grill with powder coating (minimum thickness of powder coating 50 micron), 7.5 mm size DG-102, fixed to E/H frames, 1.5mm thick, bar size 6.2mm and 7.5mm thick in required sizes, complete all as specified and directed.

S&F magnetic catchers 304 grade stainless steel finished suitable for cabinets premium quality complete fixed in position as per manufacturer's instructions complete all as specified and directed.

S&F of glass shelf assembly consisting of 5.5 mm thick sheets glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified

M&L 18 mm thick MDF board with both side laminated fixed with SS screws as in cupboard and cupboard shutters including leeping/beading fancy type and polish of the same 0.9 mm thick decorative laminate type 1,of surface finish, colour and other side white colour etc, complete all as specified and as directed. Make : Greenlam / Century ply / Royale Touche

S&F Chequered cement concrete tiles 30cm x 30cm x 20-22mm thick with grey cement & pigment machine preshed set jointed & pointed in neat cement slurry in floor & cut & polished over mm thick screed bed in CM (1:6) including demolation of old chequered tiles

S&F Paver tiles 300x300mm 10mm thick with grey cement & pigment machine preshed set jointed & pointed in neat cement slurry in floor & cut & polished over mm thick screed bed in CM (1:6) including demolation of old paver tiles

M&L for 100mm thick cement concrete type D- 2, 1:4:8 (using 40mm graded aggregate) as in sub base, complete all as specified.

M&L for sand cushioning over PCC surfaces, for laying of interlocking tiles, spread, rolled and consolidated to gradient as required, complete all as specified.

M&L for machine pressed precast concrete interlocking paver block of approved shape and size of 60 mm thickness, with minimum compressive strength of 35 N/Sqmm (M-35 grade), without correction factor for chamfering, made in rubber moulds with 0.50 mm thick scratch proof lacquer coating on top surface, with white cement and pigment laid in path / hard standing, complete all as specified and directed.including demolation of old interloking tiles

M&L for road side kerb with factory made Precast cement concrete block of mix 1:2:4 type B-1 using 20 mm graded stone aggregate, not exc 100 mm in thickness, set in CM 1:3 including making joints with or without grooves (thickness of joints except at curve shall not be more than 5 mm), including making drainage opening wherever required, complete all as specified and directed.

M&L for preparation of new concrete surfaces and applying two coats of synthetic enamel paint over a coat of priming paint, complete all as specified and directed.

Demolition and breaking 300 mm dia drain pipes (salt glazed ware, AC or reinforced concrete) set in Cement mortor including necessary excavation/dismantling of PCC/bituminous road/ tiles upto 1.5m depth and making good the dismantled portion complete all as directed.

M&L for 300 mm bore reinforced concrete pipes, class NP2, laid and jointed with and incl collars, complete all as directed.

M&L for PCC 1:3:6, type C-2 using 40 mm graded stone aggregate as in concrete bed to drain pipe including packing under and hunching against the all sides of pipe upto 300 mm bore, complete all as directed.

M&L for cutting into existing manholes for inserting SWG / RCC pipe upto 300mm dia and making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 section ) in cement concrete 1:2:4 type B-I, smooth finished and reforming benching as required, complete all as directed.

M&L for preparation of new surfaces of steel or iron surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (any tint) over a coat of red oxide primer, complete all as specified and directed.

CHAUHAN ENTERPRISES (BID ID -3388521)

HARICHAND CONSTRUCTION (BID ID -3381303)

M/S MG GROUP (BID ID -3386950)

SURESH KUMAR SHARMA & CO (BID ID -3385382)

ACR ENTERPRISES (BID ID -3381379)

Shivam Firetech Engineers (BID ID -3379251)

GLIBS CONSTRUCTION (BID ID -3381172)

B.R. Enterprises (BID ID -3388272)