RequiredExperience with Government
RequiredAnnual Turnover
RequiredOEM Authorization Certificate
RequiredOEM Annual Turnover Bid to RA enabled No Recovery Vehicle ( 1 pieces ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) Certification Product tested and trialed Yes * Product Approving authority Others Others If Others
RequiredPlease specify Product Approving Authority - * Vehicle Certification ARAI/VRDE/ICAT No - * 1/9 Model No as approved by ARAI/VRDE/ICAT - * Air and Noise pollution to conform to CPCB/CMVR norms Yes Yes All reports for the materials used be provided by manufactures from ILAC/NABL accredited labs/Central Govt Labs to be furnished on buyer's demand Yes * Complete literature
Requiredillustrated diagrams
Requiredlist of spares
Requiredspecial tools etc and operating instructions for the operation and maintenance of the vehicle and accessories should be provided (No of machines + 1) Yes * Declared documents Certificates to be furnished to the buyer on demand Yes * Generic Parameters Recovery Vehicle Others * Engine Capacity 3.298 3.298 - 6.0 Or higher Type of Vehicle Body Chassis Frame Chassis Frame Make of Chassis - * Type of Chassis Chassis without facecowl Chassis without facecowl Chassis Model No (NA for monocoque) - * Type of Recovery Vehicle Hydraulic Hydraulic Category of Vehicle for which Chassis to be used Light Capacity Commercial Vehicles Light Capacity Commercial Vehicles Body Style - * Body Options Customizable Customizable Type of Fuel Diesel Diesel Vehicle Emission Compliance BS-IV BS-IV Vehicle Mileage ( as declared by OEM as certified by Test 9.2 More than 9.2 Or higher 2/9 Agency under Rule 115of CMVR 1989) (kmpl) Speed
Requiredwith full load on road (kmph) 80 80 Engine Power BHP@rpm - * Engine Torque Max@ rpm - * Engine Aspiration Turbocharged Intercooled Turbocharged Intercooled Constructional Parameters No of Cylinder in Engine 4 4 Fuel Tank Capacity 60 More than 60.0 Or higher Length of vehicle 5785 5785.0 Width of vehicle 2020 2020.0 Height of Vehicle 2340 2340.0 Gradeability of vehicle( %) 15 More than 15.0 Or higher Step climbing 150 * Ground Clearance 230 More than 230.0 Or higher Wheel Base 3350 More than 3350.0 Or higher Kerb Weight 2755 2755.0 Gross Vehicle Weight 6450 More than 6450.0 Or higher No of Axle 2 2 Axle Configuration ( No of Outside Tyre x No of Driving Tyre) - * Type of Front Axle and Suspension System - * Type of Rear Axle and Suspension System - * BIS marked Pneumatic Tyres and tubes for both front and rear Yes * Size Of Front Tyres - * Size Of Rear Tyres - * Tyres with run flat system No No Size(Dia) of Wheel 825 * 3/9 Chassis Transmission System Manual Manual Type of Gears - * No of Speed Forward Gears 5 5
Required8 Type of Wheel drive Two Wheel drive Two Wheel drive
RequiredFour Wheel drive Type of Steering Manual Manual Turning Radius 6550 Less than 6550.0 Or lower Front Vehicle Brake - * Rear Vehicle Brake - * Type of Clutch - * Seating Capacity 3 More than 3.0 Or higher Frame Type - * No of Side Runner Structural member 2 * Side Panelling - * No of Cross Member 5 * No of Long Member 2 * Super structure construction details Others * Type Single Boom Recovery Equipment Single Boom Recovery Equipment Winch Gear Box Hydraulic * Rope Diameter 10 More than 10.0 Or higher Lifting capacity single Boom 1000 More than 1000.0 Or higher Lifting capacity Twin Boom 0 More than 0.0 Or higher Max reach on sides 4220 More than 4220.0 Or higher Min Angle of Slew for each boom (degree) 150 More than 150.0 Or higher Mass of crane (where practical) 1000 1000.0 Load lifting height 1500 More than 1500.0 Or higher Load Charts - * Hook approaches - * 4/9 Load lifting speed (m/s) 0.2 0.2 Precision load lowering speed (NA/0 for Manual Crane ) (m/s) 0 * Cranes travelling speed with and without loads (m/s) 0 * Cranes traversing speed (NA/0 for Manual Crane ) (m/s) 0 * Slewing speed (NA/0 for Manual Crane ) (m/s) 0 * Gradeability (%) 28 More than 28.0 Or higher Static load test at 1point5 times the max working load Yes * Dynamic at 1point35 times the max working load Yes * Stability tests as per IS 14469-1997 Yes * Derricking time (NA/0 for Manual Crane ) 0 Less than 0.0 Or lower Telescoping time (NA/0 for Manual Crane ) 4 Less than 4.0 Or lower Braking operations - * Counter weight 0 * Hoist mechanisms with load & speeds Yes Yes Cycle time (where necessary) (NA/0 for Manual Crane ) 0 * Functioning of limiting devices - * Performance of driving medium
Requiredfor example
Requiredmotor currents under test load conditions - * Operating Temperature -20°C to 50°C -20°C to 50°C Accessories Speed Governers Yes Yes ABS Fitted No No 5/9 Side View Mirror Yes * Low Fuel warning Light Yes * Fog Lights Yes * Standard Spare wheel and Tool Kit Yes Yes PTO provision on gear box and transfer cases Yes Yes Audio - visual warning and or motion cut off system for load moment
Requiredload radius
Requiredload limiter
Requiredload locks Yes * Over hoisting overloading Yes * Auto –two block system with rope counters Yes * Disturbed stability of the crane Yes Yes Safety brakes on hoist Yes Yes Signals for other highway traffic/users Yes * Pressure relief valve
Requiredsafety check valve
Requiredhose failure protection etc as applicable Yes Yes Audio visual signal for reversing of the crane Yes * Any other safety requirements and features considered desirable shall be provided Yes * All safety provisions for ensuring safety of equipment and its subsystems; the goods
Requiredthe surroundings; and the operators
Requiredhelpers any other road users
Requiredetc be provided Yes Yes All weather day and night operational capability is required Yes Yes 6/9 Rear Hook Yes * Fire Extinguisher Yes Yes Front Bumper Hook Yes * Performance Parameters Warranty (Time wise) 12 More than 12.0 Or higher Warranty (Distance wise) 60000 More than 60000.0 Or higher Warranty on Battery 12 More than 12.0 Or higher No Of Free Services 3 More than 3.0 Or higher * Bold specifications are the golden parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.
