Fabrication and installation of work stations in office of Superintendent (O-WM) and renovation of control room, AVS, WM, RWM, NRB, BARC Tarapur

Providing and fixing homogeneous 2.00 mm thick Vinyl flooring in approved pattern of specified size on a smooth and damp-proof base using rubber-based adhesive of approved quality including, leveling small undulations with plaster of parries if required, rolling with light wooden roller all complete as directed by Engineer-in-Charge in approved color and shade.

Old/damaged PVC carpet removings & acid cleaning patch finishing work, wooden banch polish & repairing work complete all as per drawings, specifications and directions of engineer in charge.

Providing and fixing anodized aluminum work for doors, windows, and partitions with extruded built up standard tubular sections / Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene gasket etc. as per drawings and directions of Engineer-in-charge.(Minimum anodizing thickness of 15 micron)

Providing and fixing in position suspended false ceiling system using 12 mm thick calcium silicate boards (HILUX ceiling systems) 100% humidity resistance, incombustible as per BS476 part IV with thermal conductivity of 0.043 w/m KC placed in a suspended grid of size of 600x 600mm made of hot-dipped G.I steel sections wherein the ceiling sections of 0.55 mm thick shall be suspended at 1200 mm centres along the length of ceiling with 4mm dia G.I wires/ 1 mm thick strip hangers made of G.I sheet sections with necessary level adjusters and inter channels of 0.90mm thick with connecting clips and resting on the periphery walls on wall angles of 0.55 mm thickness including providing necessary openings for light fixtures, diffusers, trap doors etc to be made as per layout drawings and as per directions of Engineer-in-charge

18mm plywood, 12mm, 6mm water proofing best quality SR 710, office wooden table L shape (H 2.5 ft×6ft L 6ft ×D2.5 ft & 2ft)& file rack, wall cabinet, stopper, lock, shelf , PUC, key board channel , 3 nos drawer, handle, door, magnet, fevicol, Ignis, 3 inch heavy duty wheel &2 coat lamination, 1.5 modling polish, hardware including best quality to engineer in charge

Providing arranging in position and fixing Low level wooden partition with aluminum framing made up of two numbers of 12mm Marine ply wood on both side & small finished with 1.5mm thick laminate of approved shade and colour, all beadings, moldings & exposed wood work to be in teak wood complete all as per drawings, specifications and directions of engineer in charge.

Clear float glass panes of 6.00 mm thickness

Providing and fixing roll up / roll down window blinds with double shade of size 2.5 ft. x 6.5 ft. as per drawing and specifications of engineer in charge