8476/GWL/E8 PROVN OF COMMUNITY HALL, SHED AND OTHER SANCTIONED WORKS UNDER AGE B/R-II OF GE GWALIOR

Amount

Surface excavation not exceeding 30cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and as directed

Demolition of cement concrete of any description and in any position (unreinforced) in ground floors/ paving not exceeding 15 cm thick (below or above GL) complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth in loose /soft soil for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth, complete all as specified and as directed

M & L, hard core of for broken stone boulder of gauge n.exc 63mm deposited, spread and levelled in layers n.exc 15 cm thick watered and rammed to a true surfaces with broken stone or boulders complete all as specified.

Returning, filling in approved soft/loose soil, including spreading, leveling, waterng and well ramming in layers n.exc 25 cm thick complete all as specified and as directed

Removing excavated material n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point all as directed.

M&L for Cement concrete type D-2 1:4:8 using 40mm graded stone aggregate as in foundation & mass concrete, complete all as specified and as directed.

M/L for providing PCC 1:2:4 type B-1 using (20mm graded stone aggregate) ,mass concrete in foundation and filling etc complete all as specified and as directed.

M&L RCC (1:1.5:3) (20 mm graded stone aggregate) as in foundation , raft, footing, plinth beam, base for column etc (Nominal Mix)

M&L RCC (1:1.5:3) (20 mm graded stone aggregate) as in column (Nominal Mix)

M&L for RCC (1:1.5:3) 20mm graded stone aggregate as in lintel bend etc as in including all form mould etc complete all as specified and as directed.

M & L form work to side of pillars , post , column square , rectangular or polygonal etc

Excavation in post hole each nexc 0.5 cum getting out returning filling with earth around in layers nexc 25cm with soil complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh , size and type fixed to any type of standards, rails, straining bolts, etc., incliding provision of binding wire complete all as specified and directed Note : Supply only chain link fencing and line wire will be measeured and paid separately.

Supply only, chain link fencing of MS galvanized fencing, any size or type.

M&L for 75mm thick PCC (1:3:6) type C1 using 40mm graded stone aggregate as in plinth protection/Path/paving surface even and smooth complete all as specified and as directed.

M&L for 40mm thick PCC (1:2:4) type B1 using 20mm graded stone aggregate as in floor/paving surface even and smooth complete all as specified and as directed.

S&F of Glass dividing strip of 38mm wide and 3mm thick inserteed in position complete all as specified and as directed

M&L use and waste formwork to sides of concrete foundation, footing base of column raft, raft beam seides and soffits of foundation and plinth beam for rough finish surface of concrete complete all as specified and as directed

M&L for Galvanised steel tubing 50mm bore medium grade Complete all as specified and directed.

M&L for brick work with sub class "B" bricks straight or curved on plan exc 6m mean radius built in cement morart 1:6 complete all as specified and as directed.

M&L for Brickwork with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement morart 1:4 complete all as specified and as directed.

M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 complete all as specified and as directed.

M&L for preparation of new or undecorated or decorated plastered or un-plastered surface of wall and applying two coats of oil emulsion distemper over wall putty complete all as specified and as directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on on fair faces of brick surfaces finished fair and even and smooth (without using extra cement) complete all as specified and as directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on on other than fair faces of brick surfaces finished fair and even and smooth (without using extra cement) complete all as specified and as directed.

M&L for preparing newly plastered surface of wall and applying two coats of cement base paint of approved shade/tint complete all as specified and as directed.

M&L for preparation of the newly plastered surfaces of walls & applying three coats of white wash on wall surfaces complete all as specified and directed.

M&L for PCC 40mm thick in DPC 1:2:4 B0 using 12.5mm graded stone aggregate incl water prrofing compund complete all as specified and as directed.

M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe- 290 (Gde E-165) Complete all as specified and directed

S&F framed work (ornamental) as in steel gate of angle or other section with gusset plate ,rails braces etc complete drilled for fixing of steel sheeting or other covering door etc to be prepared for hanging or sliding with and including either hook and hinges and also fastening and fixing complete.

M&L for steel, plain black sheet in wall cladding, steel gates and similar work, cut to size, holes punched including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with reiveted or welded seams, including bending or turning up, mitred angles etc as required of 0.8mm thick complete all as specified and as directed

S&F of MS rolled section as in main and cross beam, hip and jack rafters, purlins where connected to common rafters and running rails, fixed with angle cleats or other conneting plates, Fe-290- W(Gde- E-165) complete all as specified and as directed.

S&F of MS Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing Beam, tee, angle, channel or flat sections) Fe-290- W(Gde- E-165) including complete all as specified and as directed.

M&L for Nut, bolt washers with Hexagonal head of dia more than 10mm and length as directed complete all as specified and as directed.

S&F of Pre painted galvalume sheet 0.50 mm thick having aluminum zinc coating 150 gsm/ sqm double ribbed trapezoidal profile steel sheet any colour having tensile strength of 550 Mpa as in Roof covering /cladding to wall fixed with self tapping screws or 'J' or 'L' hook complete all as specified and as directed.

S&F of Pre painted galvalume sheet 0.50 mm thick having aluminum zinc coating 150 gsm/ sqm plain steel sheet any colour having tensile strength of 550 Mpa as in Ridge fixed with self tapping screws or 'J' or 'L' hook complete all as specified and as directed.

S&F of MS hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and ountersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including cutting drilling hole etc securing bolts; complete all as specified and as directed.

S&F of, Box type steel windows with side hung shutters (double shutters for glass and guaze) jointed together with an including grills using 10mm square bars @10 cm C/C as per TD No CEBZ/TD/14/2011 including box type hinges with steel handle and steel peg stay complete with glazing bars devetailed and welded including filling of cement concrete 1:3:6 type C0 using 12.5mm graded aggregate complete all as specified and as directed. Note : Glass/guage shall be measured and paid separately under respective item.

S&F of, Box type steel ventilator with top hung shutters (double shutters for glass and guaze) jointed together with an including grills using 10mm square bars @10 cm C/C as per TD No CEBZ/TD/14/2011 including box type hinges with steel handle and steel peg stay complete with glazing bars devetailed and welded including filling of cement concrete 1:3:6 type C0 using 12.5mm graded aggregate complete all as specified and as directed. Note : Glass/guage shall be measured and paid separately under respective item.

S&F of MS Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., including filling of cement concrete 1:3:6 type C0 using 12.5mm graded aggregate complete, as specified and fixed and size of frame 125x60mm complete all as specified and as directed.

S&F of MS Pressed steel frames for doors with one or more redates including necessary fixing lugs hinges lock strike plate etc including filling of cement concrete 1:3:6 type C0 using 12.5mm graded aggregate complete as specified and fixed and size of frame 105x60mm complete all as specified and as directed.

M&L for preparation and applying two coats of synthetic enamel paint over a priming coat on new steel surface exceeding 10cm width or girth complete all as specified and as directed.

M&L for preparation and applying two coats of synthetic enamel paint over a priming coat on new steel surface n.exceeding 10cm width or girth complete all as specified and as directed.

S&F of 35mm thick factory made 2nd class hard wood plain framed, shutter(two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 complete all as specified and as directed.

S&F of MS Sliding door bolts Rod pattern stove enamelled black with bolt not less than 12mm dia with and including a minimum of 6 bolt and nuts four on bolt plate and two on staple plate of 250mm size complete all as specified and as directed.

M&L for for preparation and applying two coats of synthetic enamel paint over a priming coat on new wood surface exceeding 10cm width or girth complete all as specified and as directed.

S&F of solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube as specified and drawing complete all as specified and as directed.

S&F of factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of M.S tube for top & bottom rails M.S. frame shall be covered with heat moulded wood plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheet as for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement , suppling and fixing in the frame at site as per specification & drawing, complete all as specified and as directed.

S&F of 100mm long extruded aluminium alloy anodised butt hinges with galvanised mild steel hinge pin type B-21 complete all as specified and as directed.

S&F of 65 mm long extruded aluminium alloy anodised butt hinges with galvanised mild steel hinge pin type B-21 complete all as specified and as directed.

S&F of 150mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and as directed.

S&F of 150mm long Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S & F 150mm MS Bow handle Oval type stove enamelled black complete.

S&F of Aluminium alloy, anodised,sliding door bolt 300mm long with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

S&F of galvanised wire cloth 0.35 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks complete all as specified and as directed.

M&L for 3 mm thick Sheet glass ordinary quality and glazing with oil putty/silicone compund in square but nexc. 0.5 sqm in each pane , complete all as specified and as directed.

Spreading and levelling in layers n exc. 25 cm thick well ramming including watering with soil complete all as specified and as directed.

M&L for 75 mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in subbase & mass concrete complete all as specified and as directed.

M&L for 100 mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in subbase & mass concrete complete all as specified and as directed.

M&L for Hard core of gauge nexc 63 mm, deposited, spread and leveled in layers n exc. 15 cm thick, watered and rammed to a true surface with broken stone or boulders complete all as specified and as directed.

M&L for 50 mm thcik PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in Plinth protection, complete all as specified and as directed.

S&F of Coloured non skid ceramic tiles 7 to 8mm thick (square /rectanglar) area of each tile n. exc 0.11 sqm,in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match,laid over and including 15mm thick layer of CM 1:4 complete all as specified and as directed.

S&F of Vitrified double charges tiles polished, area of each tiles not exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchwith coloured tiles laid over and including 15mm thick screed bed or bedding layer for fixing tiles in dado in CM 1:4 complete all as specified and as directed.

S&F of glazed ceramic tiles 300x 450x 7mm thick, over vertical surface of wall, set and jointed in neat cement slurry and pointed in coloured cement to match with coloured tiles laid over and including 10mm thick cement mortar 1:4 complete all as specified and as directed.

M&L for 75 mm dia of out let PVC (SWR) floor trap plain with grating incl. jointing with solvent cement complete all as specified and as directed.

S&F of 110mm dia PVC(SWR)pipes single socketed, in any length with rubber ring joints,fixed to walls. complete all as specified and as directed.

S&F of 75 mm dia PVC(SWR)pipes single socketed, in any length with rubber ring joints,laid in Wall/floor of floor complete all as specified and as directed.

S&F of 110mm dia PVC(SWR)pipes bends any radius complete all as specified and as directed.

S&F of 75 mm dia PVC(SWR)pipes bends any radius.door complete all as specified and as directed.

S&F of 110mm dia PVC(SWR)pipes junction,single (single T/Y ) equal or unequal any radius.with acces door complete all as specified and as directed.

S&F of 110mm dia PVC(SWR) vent cowl complete all as specified and as directed.

S&F of vitreous china water closet Orissa Pan size 580 x440 mm complete including provision of lime concrete bedding with integral foot rest with 'P' or 'S' strap including 32mm dia polyethylene flush pipe, including S & F 10 Ltr PVC valveless, syphonic action type, flushing cistern, with inlet ball valve float and handle including brackets etc, and PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S&F of of 20mm CPVC pipes SDR & 11 fittings in trenches complete all as specified and as directed.

S&F of of 25mm CPVC pipes SDR & 11 fittings in trenches complete all as specified and as directed.

S&F of PVC tank of 1000 ltrs triple layer (white colour) capacity complete all as specified and as directed.

S&F of 25mm bore dia, Ball brass valves, high pressure with polythene float and fly-nut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and as directed.

S&F of 20 mm dia Gun-metal, globe or gate valves, with iron wheel head , screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F of 15mm dia of fancy type chromium plated bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipr or for brass ferrule and fixed, complete all as specified and as directed. Make: Prayag Cat No PIS-08 or equivalent

S&F of 15 mm dia Angle valves, cast copper alloy, screwed down,high pressure with crutch or butterfly handle, screwed for iron pipe or for and fixed complete all as specified and as directed. Make: Prayag Cat No PIS-10 or equivalent

S&F of stop valve fancy type chromium plated with long shank and cup (Concealed type) 15mm bore, cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions, complete all as specified and as directed. Make: Prayag Cat No PIS-18 or equivalent

Supply only 15 mm bore fancy type pillar taps, fancy type with capstan heads, chromium plated, screwed down high pressure with or without lettered "Hot or Cold" with long screwed shanks and fly nuts screwed for iron complete all as specified and as directed. Make: Prayag Cat No PIS-02 or equivalent

S&F of vitreous china wash basin white, flat back, size 550 x 400 mm excluding taps, waste chain and plug and porcelain stopper but including brackets complete all as specified and as directed.

S&F of vitreous China Half stall urinal white complete, including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal plugs with and including 60mm long brass screws , pointing around urinal back in cm complete all as specified and as directed.

Supply only 32mm CP brass waste fitting for wash hand basin with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

S&F of brass chromium plated towel rail, 20mm dia "D -type" of 60cm length between flanges complete all as specified and as directed.

S&F of framed work such as grills gratings, etc, with ends of bars shouldered and or riveted , or forged into spikes, framed guard bars , barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 290-0 or Fe-165-0 complete all as specified and as directed.

M&L reinforcement bars 10mm (TMT)dia and over, cut to length bent to shape required, and binding with MS wire not less than 0.9mm dia complete all as specified and as directed.

M&L for for MS bars 5mm (TMT)dia and over, cut to length bent to shape required, and binding with MS wire not less than 0.9mm dia complete all as specified and as directed.

S&F of of false ceiling 4mm thick HPSC pre-prime non asbestos fibre cement building board (E Classic size 600mm x 600mm / 595mm x 595mm) decorative finish and fixed with screw including anodised aluminium snap grid frame work false ceiling of mian tee of size 38 x 25 x 1.40mm and cross tee of size 25x25x1.20mm and wall angle of size 25x25x1.30mm for filing including suspended with 2mm dia GI Wire hangers from puline of the roof complete all as specified and as directed.

S&F of Powder coated (min thickness of powder coating 50mm micron) aluminium frame for partition, doors, windows ventilators with one or more rebates including joining cleat for fixing etc.complete all as specified and as directed.

M&L for moorum/red bajri filling in floors or pavings laid in layers n.exc. 15cm thick spread levelled and rammed including watering complete all as specified and as directed.

M&L for walling of random rubble brought upto coursed, well bounded, bedded and solidly hearted, built in CM 1:6complete all as specified and as directed.

S&F of factory made solid PVC Moulded Door shutter with particle board core, 28 to 30mm thick (stiles), with 2,4, or 6 panel design with 2mm thick moulded PVC Sheet on back face & 2mm plain colour PVC sheet on back face, fixed to frame at site as per specification & drawings complete all as specified and as directed.

M&L for 25mm thick Cement concrete B-0, 1:2:4 type B-0 (12.5mm graded aggregate) as in levelling course complete all as specified and as directed.

M&L for Providing, cement concrete Type B1 1:2:4 (20 mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex tones, bed plates, kerbs not provided for, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directedcomplete all as specified and as directed.

M & L for point wiring with 1.5 sqmm (Nominal Area)PVC insulated FRLS un sheathed multi stranded copper conductor drawn in and including non metalic rigid PVC concealed conduit of med grade of suitable size with all fitings and accessories including factory made MS/ pressed modular flush box with zinc coated duly concealed in wall including modular metal flush boxes reqd as per site reqmt for mounting switches, sockets fan regulators etc including continuous earth wire PVC insulated 1.5 Sq mm FRLS copper conductor connecting to common earth and earth dolly complete all as specified For one light point / Fan point controlled by one switch complete all as specified and directed.

Ditto above item but For one 5 pin socket out let 5 amps on same board complete all as specified and directed.

Ditto above item but One 5 pin socket outlet 5 Amp controlled by one switch on independent board complete all as specified and directed.

All as per item above but with 2.5 sqmm multistrand copper conductor cable for one 15 Amp socket outlet controlled by one switch on independent board and 1.5 sqmm PVC insulated multi strand copper conductor cable as continous earth wire complete.

Supply and fixing ceiling rose surface bakelite 3 terminals 65x50mm complete all as specified

S & F modular white cover plate with frame of 12 module

S & F modular white cover plate with frame of 03 module

S&F Modular switch 1 way 06 amp single pole

S & F modular switch socket combination 16A, 6 Pin of 3 module

S & F of modular socket outlet 6A-5 pin combined of 02 module

S & F of modular fan step regulator 120 W-2 module

S&F Lamp holder, PVC/polycarbonate type with back plate suitable for angular fittings complete.Make : Leader/Legrand/Havells.

S & F security light fittings better optics for uniform distribution IP 65 protection LED of 30 watt, Heat resistance glass, pressure die cast aluminium housing including 25mm dia galvanised iron pipe light grade bracket bent to shape over all length 0.60mtr fixed to wall with 02 Nos FI clamps made of 40 x 6 mm FI, 15 cm long, 8 mm dia bolts and nuts with washers grouted in wall complete including reqd length of 1.5 Sqmm PVC multistranded copper conductor for connection from ceiling rose to light fittings incl testing on completion all as specified and directed. Make :- Wipro, Havells & Philips.

S&F of 20W of LED security Light fixture with IP66 protected Die-Cast Aluminum housing and Heat resistive Toughened Glass. Driver shall be 3 stage Constant Current Constant Voltage with voltage range of 150-270V AC. Output voltage of driver should be complied to Safety Extra Low Voltage norms not exceeding 60V DC. Make :- Wipro/Philips/Halonix.

S&F Ultra bright LED Tubelight (single side connection) with very high efficacy suitale for Regal Batten for LED Tube (Single Side Connection) alongwith LED tube light of 18 w incluing req length of 1.5 Sqmm PVC multistranded copper conductor ro electrical connection from ceiling rose to connector of LED fitting including testing on completion all as specified and directed. Make :- Wipro, Havells & Philips.

M&L, sub main wiring with two single core PVC insulated unsheathed FRLS multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 6 sqmm size drawn in and including non metallic rigid PVC concealed conduit (ISI marked with valid CML No) not less than 25 mm dia with all fitting & fixing accessories including one run single core PVC insulated unsheathed 2.5 Sqmm FRLS copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB and incl taking down old unsv one all as specified and directed

S & F False ceiling light 2x2 feet (600 x 600 x 70 mm) of 28 Watt suitable for Armstrong/ Grid Ceiling. Make :- Wipro, Havells & Philips.

Supply only ceiling fan 1200mm sweep, 230 Volts AC single phase, 50 Hz 3 blades, double ball bearing, BE 5 star rating energy saving complete with and including three core flexible PVC insulated multi stranded copper conductor cable of size 0.5 sqmm from ceiling rose to connector, including extra GI/MS pipe down rod, as per site requirement complete all as specified and directed. Make :- Usha, Havells, Crompton.

S&F, in repair, MCB DB, sheet metal enclosures double door SPN 8 way with 200 Amps rated bus bar 240 volts 2 in 1 shutter (METAL DOOR) type with blanking plates where required and IP 43 degree protection complete all as specified and directed. Make :- Schenider, Seimens & Legrand.

S&F, in repair, MCB DB, sheet metal enclosures double door SPN 6 way with 200 Amps rated bus bar 240 volts 2 in 1 shutter (METAL DOOR) type with blanking plates where required and IP 43 degree protection complete all as specified and directed. Make :- Schenider, Havells & Legrand.

S&F Sheet metal enclosure single pole and neutral with a two pin and earth plug and socket with and including one single pole MCB 20 Amp 240 volts with 'C' curve complete. Make :- Schenider, Seimens & Legrand.

S&F, MCB SPN 40 to 63 Amps, 240 volts 'B' series 16 KA ,including connection with suitable size copper lugs complete all as specified and directed. Make :- Schenider, Seimens & Legrand.

S&F, MCB SP 240 volts, 6 to 40 Amps, 'B' series 10 KA including connection with suitable size copper lugs. complete all as specified and directed. Make :- Schenider, Seimens & Legrand.

Supply and fixing of 1100 volts grade heavy duty electric cable PVC insulated Al conductor served with an inner sheathing of PVC tape and over all PVC sheathed in service connection suspended by insulating hangers not more than 1 mtr apart including 4 mm suspension wire of two single core cables of size 16 Sqmm complete incl taking down old unsv one all as specified and directed

M & L for house service bracket (hook type) complete with 3 mtr long GI pipe 40 mm dia GI pipe Med grade two Nos 90 degree bends MS hook and stay or guy complete incl taking down old unsv one all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) vertically, with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of MES Schedule Part-I connecting to earthing test point & to main switch board and testing on completion with and including necessary excavation and earth work in any type soil, earth lead connected to earth test point & to main switch board etc with & including adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20mm graded BT stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, internal surface of concrete shall be given 10mm thick plaster in CM 1:4, pre cast RCC (1:2:4) type B-1 (using 20mm graded BT stone aggregate) 40mm thick cover, reinforced with 8mm dia deformed or TMT bars 3 Nos both way with 12mm dia round bar handle, GI medium grade watering pipe 20 mm dia with funnel and wire mesh and 15mm dia GI medium grade earth lead protection pipe etc complete all as specified and directed.

S & F only Exhaust fan of 300 mm sweep (1440 RPM) complete all as specified and directed by Engineer in Charge. Make :- Crompton, Usha, Orient

M/s Ratan Lal Jain and Co.

Arkay Instrumentation