Stage Contract for supply of various items required for Repairs of Damaged Transformers in Divisional Workshop in respect of Electric Division Sumbal for the year 2025-26

Amount

LT brass bush rod with double nuts and washers 12 mm

LT brass bush rod with double nuts and washers 19 mm

HT brass bush rods with double nutts and washers including brass cup and oil seel washer

11 kV HT bushing for x-mers conforming to IS 2009, 3347

LT bushing complete with bush cup suitable for:-12 mm bush rod

LT bushing complete with bush cup suitable for:-16 mm bush rod

LT bushing complete with bush cup suitable for:-19 mm bush rod

DPC Aluminium Wire of sizes 12, 14,16 and 18 SWG (Against Almn. Scrap of 1 Kg Wire supplied)

DPC Almn. Wire 18,16,14,12 SWG conforming to relevant IS

DPC Cu. Wire 18,16,14,12 SWG conforming to relevant IS (Against Cu. Scrap of 1 Kg Wire supplied)

DPC Cu. Wire 18,16,14,12 SWG conforming to relevant IS

Super enamelled Almunium Wire of sizes 13,14,16 and 18 SWG (Against Almn. Scrap of 1 Kg Wire supplied)

Super enamelled Almn. Wire 13,14,16,18 SWG conforming to relevant IS.

Cotton tape roll 100 ft long of standard quality. 1" width

Cotton tape roll 100 ft long of standard quality. 1. ½" width

Fibre Glass insulation sleeves of standard quality 3 mm dia

Fibre Glass insulation sleeves of standard quality 4 mm dia

Fibre Glass insulation sleeves of standard quality 5 mm dia

Fibre Glass insulation sleeves of standard quality 8 mm dia

Ruberised washers of standard quality suitable for:- 12 mm bush rods

Ruberised washers of standard quality suitable for:- 16 mm bush rods

Ruberised washers of standard quality suitable for:- 19 mm bush rods

Cork Washer of Sizes

cork sheets conforming to relevant IS. 2'x3'x4 mm thick

cork sheets conforming to relevant IS. 2'x3'x6 mm thick

Cork washers (5 mm thick) suitable for 11 KV bushing.

Cork washers (5 mm thick) suitable for 12mm LT bushing

Cork washers (5 mm thick) suitable for 16mm LT bushing

Cork washers (5 mm thick) suitable for 19mm LT bushing

Bakelite tubes of sizes standard quality 1 mtr long. 6 mm Dia

Bakelite tubes of sizes standard quality 1 mtr long. 10 mm Dia

Bakelite tubes of sizes standard quality 1 mtr long.12 mm Dia

HT kraft paper 2/3 mil conforming to relevant IS

Hard card board (press board) conforming to IS 1576.

leatheroid insulation paper conforming to relevant IS. 5 -20 mil

Silica gel breathers suitiable for 63-400 KVA x-mer

Silica gel in sealed containers (packing of 20 Kgs)

Cotton Dhoti cloth. (un-stained)

Synthetic Rubber Flexible Gasoline Oil Fuel Hose Pipe 3/4 inch dia

LT Almn. Strips of sizes ( Electrolytic grade)

Fevicol adhesive

Insulating gum.

Enamel paint gray colour (Nerolac, Asian, Berger make)

Bobin sheets standard quality

Varnish standard quality

Transformer oil make true oil/HP/BP/IOC/Power oil

Transformer oil make true oil/HP/BP/IOC/Power oil excluding the cost of barrel (Note: Empty barrel to be returned back to gthe supplier)

M.Seal of standard quality 60 gram pack

Body solder (Car Patch) of standard make

Heating Elements (ceramic) 1 KW

Heating Elements (ceramic) 2 KW

Heating Elements (ceramic) 3 KW

Heating Elements tubular type U shaped (ceramic) 1.5 KW

Heating Elements tubular type U shaped (ceramic) 2 KW

Winding of DPC Aluminium for HT coils of 63/100/250 KVA Transformers (material will be supplied by the department)

Re-winding of LT Aluminium coils of 63/100/250 KVA Transformers

VTH Rotary Manual Hand Oil Steel Barrel Pump Extractor for Drum with Dual Direction Operation 1.25 inch dia

Three phase 2 HP motor (Crompton/Usha make)

Bosch GSB Plastic 550W Corded Electric Mechanic Kit Professional Drill

Supply of Oil Seal Washer for bush rod o type

Supply of wooden (Farma) for LT winding purpose for 250 kVA Transformer.

Supply of wooden (Farma) for LT winding purpose for 100 kVA Transformer.

Supply of wooden (Farma) for LT winding purpose for 63 kVA Transformer.

Supply of wooden (Farma) of sizes for HT winding purpose for 100-400 kVA Transformer.

supply of PVC solid sheets Heat insulated 1220mmx2440mm thickness 3mm to 40mm (Polyvinl).

supply of Almunium joint breezing point.

Tension(Breaker) for LT Winding Machine

C Clamps for LT Winding Machine

Bosch GWS 900-100 Heavy Duty Electric Angle Grinder, 900W, M10, 100 mm Disc Dia., Lockable Switch, Direct Cooling, 1.9 kg + Wrench, Protective Guard & Auxiliary Handle, 1 Year Warranty

PVC Insulating Paper 2 to 5 Mil

Hand Driven Insulation Tester with Resistance Range 10,000M Ohm /5000v motwane /waco

2 Ton 1.6m Hydraulic Manual Forklift 2TON Lifting Capacity and Max Fork length 900 mm /fork spread 220-560 /Fork width 1600 mm Max fork heigh 1000-2000 mm isi indian make only with availability of spares in J&K

Insulating Tap rolls steel grip 17mmx6mm ( Taparia / pidilite )

PVC Mallet with fiberglass Handle weight not less than 500 Grams and 35 MM Dia

AL AZEEM ENTERPRISES (BID ID -2381206)

M/S EVEREST ENTERPRISES (BID ID -2378280)

HIDHIMBA TRADERS (BID ID -2381132)

UBAID SUPPLIERS AND CONTRACTORS (BID ID -2381233)