Loading
Loading…
Loading…
Tender Value
Refer Docs
Closing Date
24 Feb 2026, 11:30 amClosed
Single Packet
Normal Tender
No
Not Applicable
Itemwise/Consigneewise
Lowest to Highest
CONSIGNEE
Not Applicable
90 days
Expenditure
General
15
1 condition
Material will be purchased from OEM or their authorized distributor/dealer/agents. Authorized dealers/distributor/agent of OEM shall submit tender specific authorization from OEM along with the offer failing which their offer shall be summarily ignored.
29 conditions · 2 needing a document upload
Before Submitting the Bid, bidders are advised, in their interest, to kindly go through the CHECKLIST (that can be accessed by clicking VIEW IREPS DOCUMENT tab).
The tendered item(s) fall(s) within the ambit of clause 3 (b) of Public Procurement (Preference to Make in India) Order No.: P-45021 2 2017-PP (BE II) dated16.09.2020 issued by DPIIT, Ministry of Commerce and Industry. This implies that there is sufficient local capacity and competition in supply of the tendered item(s) of required quality, and therefore public procurement of this item is restricted to Class-I local suppliers only (having local content equal to or more than 50% as defined under the Para 2 of the above order) or class II local suppliers having local content equal to or more than 20 % but less than 50 % as defined under para 2 or above order) and the vendors who do not qualify to be class-I local supplier(s) or class-II local supplier(s), are not allowed to bid in this tender and their offer shall not be considered for any ordering. In case any vendor, who does not qualify to be class-I local supplier(s) or class-II local supplier(s) for the tendered item, but participates in the tender, it does so at its own risk and cost and Railways shall not be liable for any loss or damage caused to the vendor.
HSN Code must be mentioned during quoting of tender.
Firm should mention place of inspection and upload documentary evidence (document issue by government) for the same.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
1 condition
Validity of Offer: No deviation from the offer validity period stipulated in the tender is permitted.
1 location across Uttar Pradesh · 36 Numbers total
CARBIDE ROLLER FOR BURNISHING TOOL FOR HORIZONTAL LATHE MACHINE (OP- 20). As per Annexure No: - M-100/B&W/NS/WS/Burnishing/Spares/01. PIN ASSEMBLY WITH GREASE FITTING FOR BURNISHING TOOL FOR HORIZONTAL LATHE MACHINE (OP- 20). As per Annexure No: - M-100/B&W/NS/WS/Burnishing/Spares/02.
15255360A~MCF
15255360A
Open - Indigenous
Goods
Uttar Pradesh
₹0
Exempted
24 Feb 2026
28 Jan 2026
5 items · 36 Numbers total
CARBIDE ROLLER FOR BURNISHING TOOL FOR HORIZONTAL LATHE MACHINE (OP-20). As per Annexure No: - M-100/B&W/NS/WS/Burnishing/Spares/01. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| BOGIE SHOP, MCFRBL | Uttar Pradesh | 4.00 Numbers |
| Total | 4 Numbers | |
PIN ASSEMBLY WITH GREASE FITTING FOR BURNISHING TOOL FOR HORIZONTAL LATHE MAC HINE (OP- 20). As per Annexure No: - M-100/B&W/NS/WS/Burnishing/Spares/02. [ Warranty Period: 30 Mo nths after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| BOGIE SHOP, MCFRBL | Uttar Pradesh | 10.00 Numbers |
| Total | 10 Numbers | |
THRUST RACE FOR BURNISHING TOOL FOR HORIZONTAL LATHE MACHINE (OP-20). As per An nexure No: - M-100/B&W/NS/WS/Burnishing/Spares/03. [ Warranty Period: 30 Months after the date of del ivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| BOGIE SHOP, MCFRBL | Uttar Pradesh | 6.00 Numbers |
| Total | 6 Numbers | |
BALL VALVE FOR BURNISHING TOOL FOR HORIZONTAL LATHE MACHINE (OP-20). As per Anne xure No: - M-100/B&W/NS/WS/Burnishing/Spares/04. [ Warranty Period: 30 Months after the date of deliv ery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| BOGIE SHOP, MCFRBL | Uttar Pradesh | 8.00 Numbers |
| Total | 8 Numbers | |
THRUST BEARING FOR BURNISHING TOOL FOR HORIZONTAL LATHE MACHINE (OP-20). As per Annexure No: - M-100/B&W/NS/WS/Burnishing/Spares/05. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| BOGIE SHOP, MCFRBL | Uttar Pradesh | 8.00 Numbers |
| Total | 8 Numbers | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
5640174.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .