Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.1 LAccepted-Finance VPO TEH BHARMOUR DISTT CHAMBA HP | CHAMBA | HIMACHAL PRADESH | 176207 | L1 | Accepted-Finance Fulfil eligibility criteria, technical evaluation recommended for acceptance after negotiation within justified item wise rate and amount. | |
| 2 | L2₹17.2 L+₹5,406.80 (0.32%)Rejected-Finance | L2 | Rejected-Finance Fulfil eligibility criteria, technical evaluation but due to higher rates being L2 tender not accepted. | |
| 3 | L3₹20.6 L+₹3.5 L (20.4%)Rejected-Finance | L3 | Rejected-Finance Fulfil eligibility criteria, technical evaluation but due to higher rates being L3 tender not accepted. |
Tender Value
Refer Docs
EMD Value
₹23,200
Closing Date
8 Sept 2022, 10:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Project Director, HPCDP-JICA-ODA, Hamirpur
Administrative Building PMU, Agriculture Complex, Hamirpur, District Hamirpur (H.P)
Providing and Installation of Aluminium work at Training Centre Bangana, Tehsil Bangana, District Una (H.P.)
2022_HPCDP_64057_1
No AGR H SPMU (F) 7-TC/1/2021-1530 dt 25/08/2022
Open Tender
Civil Works - Buildings
Item Rate
90 days
Bangana, District Una
Please refer Tender documents.
15 documents required · 15 mandatory
₹1,500
Yes
Project Director
₹23,200
Yes
24 Sept 2022
25 Aug 2022
8 Sept 2022
25 Aug 2022
8 Sept 2022
25 Aug 2022
Amount
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of Jindal make with powder coated aluminium (minimum thickness of powder coating 50 micron) conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angles, aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, T/L sections and all necessary fittings as required complete as per architectural drawings and the directions of Engineer-in?charge. (Glazing to be paid for separately)
For fixed portion with powder coated aluminium of Jindal make (minimum thickness of powder coating 50 micron) complete in all respect as per direction & entire satisfaction of Engineer incharge.
For shutters of doors, windows & ventilators with powder coated alluminium of Jindal make (minimum thickness of powder coating 50 micron) including providing and fixing stainless steel hinges, pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required complete in all respect as per direction & entire satisfaction of Engineer incharge.
Providing and fixing fly proof Stainless steel (grade 304) wire gauge of 0.5 mm dia wire and 1.4 mm aperture on both sides of approved make to doors and clerestory windows with beading, C.P. brass / stainless steel screws etc. complete in all respect as per direction & entire satisfaction of Engineer incharge.
Providing and fixing glazing with float glass panes of 5 mm thickness (weight not less than 12.50 Kg./Sqm.) of Sant Gobind/Modi float make in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings, directions & entire satisfaction of engineer-in-charge.
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll with decorative lamination on both sides and balancing lamination on other side, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws, beadings etc. as required complete as per the architectural drawings, directions & entire satisfaction of engineer-in-charge.
Providing and fixing aluminium sliding door bolts of 300X16mm (three hundred into sixteen millimeters) size, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete in all respect as per directions & entire satisfaction of Engineer incharge.
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete in all respect as per directions & entire satisfaction of Engineer incharge.
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete in all respect as per direction & entire satisfaction of Engineer incharge.
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete in all respect as per directions & entire satisfaction of Engineer incharge.
Providing and fixing stainless steel (Grade 304) railing of Jindal make made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge and complete as per directions & entire satisfaction of engineer-in-charge.
aatish choudhary govt. cont.
SUPER CONSTRUCTION
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .