Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹43.9 LAccepted-AOC GP RAM COLONY AMRITSAR JALANDHAR 144103 | AMRITSAR | AMRITSAR | PUNJAB | 144103 | L1 | Accepted-AOC L1 | |
| 2 | L2₹47.6 L+₹2.8 L (6.26%)Rejected-Finance NEAR RAILWAY CROSSING ADAMPUR DOABA JALANDHAR JALANDHAR PUNJAB 144103 | JALANDHAR | PUNJAB | 144103 | L2 | Rejected-Finance Other than lowest. | |
| 3 | L3₹49.7 L+₹4.9 L (11.0%)Rejected-Finance | L3 | Rejected-Finance Other than lowest. |
Tender Value
₹44.9 L
EMD Value
₹89,800
Closing Date
23 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF Adampur
Military Engineer services AF Stn Adampur 144103
MISC REPAIR TO CERTAIN BLDGS IN OTHER THAN TECH AREA AT AF STN ADAMPUR
2022_MES_548105_1
GE/AF/ADM-25/2022-23
Open Tender
Civil Works - Canal
Item Rate
180 days
GE AF Adampur
Refer NIT and Tender Documents
9 documents required · 9 mandatory
₹500
GE AF Adampur
₹89,800
Yes
14 Oct 2022
27 Aug 2022
24 Sept 2022
27 Aug 2022
23 Sept 2022
10 Sept 2022
27 Aug 2022 - 9 Sept 2022
Amount
B/R WORKS
Excavation in trenches in soft/loose soil not exceeding 1.50 metre wide and not exceeding 1.50 metre in depth; for foundation, etc. and getting out complete, all as specified.
Returning filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick each, complete, all as specified.
Removing excavated spoil to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete, all as specified.
PCC type E-2 (1:5:10), using 40 mm graded stone aggregates as in filling & mass concrete, sub base, complete all as specified.
RCC type B-1 (1:2:4), using 20 mm graded stone aggregates as in shelves / cooking platform etc like including necessary formwork complete all as specified.
Brick work using bricks as specified in PS clause 5.1, straight or curved on plan exceeding 6.00 metre mean radius built in cement mortar (1:6), complete all as specified.
Cutting chases pinning using mechanial chase cutter to facing where required and pointing in cement mortar (1:3) for concealed water tubing or similar requirements in brick walls cutting n.exc 10 cm girth. complete all as specified.
Factory made 35 mm thick ,2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a);,etc complete all all as specified.
Factory made 2nd class hard wood rail and style, thicknesss of shutters,35 mm, Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated,etc complete all all as specified.
Factory made solid PVC Door frame of size 50mm x 42 mm made out of 5mm thick wood grain colour PVC sheet reinforced with mild steel square tube, suppling & fixing in opening, complete all as specified.
Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded wood grain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top rail, lock rail and bottom rail, panelling of wood grain colour PVC sheet to be fitted in the MS frame welded / sealed to the stile and rails with suitable PVC sheet beading and jointed together with solvent cement as specified in SSR Part II, complete all all as specified.
18/ 19mm thick block board, grade 2 quality,interior grade, commercial type including provision of 6mm thick second class hard wood leaping, fixed to external edges with nails and fixed in REAPAIR on second class hard wood batten (not less than 40 mm x 40 mm) frame work as in shelves complete all as specified.
Factory made single extruded WPC (Wood polymer composite) solid door / window / ceosetory windows and other frame / chowkhat of size 45x85mm comprising of virgin PVC polymer K value 58-60 (suspension Grade), calcium carbonate and natural fibers (wood powder / rice husk / wheat husk) and non toxic additives (maximum toxicity index of 12 for 100gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200N (Face) & 1100N (Edge), minimum compressive strength of 58N/ mm2, modules of elasticity 900 N/ mm2 and resistance to spread of flame of Class A category with property of being termite / borer proof, water / moisture proof and fire retardent and fixed in position with MS hold fast / lugs / SS dash fasteners of required dia and length complete all all as specified.
Factory made single extruded WPC (Wood polymer composite) solid plain flush shutter 30mm thick comprising of virgin PVC polymer of K-value 58-60 (Suspension grade), calcium carbonate and natural fibres (wood powder /rice husk/wheat husk) and non toxic additives ( maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/ cum and screw withdrawal strength of 1800 N (face) and 900 N (edge), minimum compressive strength of 50N/ Sq.mm, modules of elasticity 850 N/ Sq.mm and resistance to spread of flame of Class A category with property of being termite / borer proof, water / moisture proof and fire retardent and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screw complete all all as specified.
Aluminium anodised barrel tower bolt of extruded section 150mm long, ISI marked, complete all as specified.
Stainless steel butt hinges100mm long, ISI marked, complete all as specified.
Stainless steel butt hinges 75 mm long, ISI marked, complete all as specified.
Extruded aluminium anodised handles fabricated type 125 mm long, ISI marked complete all as specified.
Aluminium alloy, anodised, ISI marked sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy 250mm long, IN REPAIR, complete all as specified.
Mild steel helical door spring 200mm, ordinary rat tail rod pattern including roller and roller plate ISI marked, IN REPAIR, complete all as specified.
Double leg aluminium anodised door stopper with rubber foot, ISI marked and fixed with steel screws to bottom rail of doors complete all as specified.
Stainless steel conduit 20 mm bore, cut to size and erected in position including provison SS brackets & PVC decorative type finial (Two nos for each opening) IN REPAIRS, complete.
Galvanised steel wire cloth 0.56 mm nominal dia of wire and average width of aperature 1.18 mm and fixed with tinned tacks or galvanised wire staples all as specified.
Framed mild steel work such as grills, grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work confirming to Fe-290-Gde E-165, IN REPAIRS, complete all as specified. NOTE: Grill shall be factory fabricated and supplied duly welded to window frame with shop coat of red oxide primer.
Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.
Pressed steel frames made out mild steel sheet 1.25 mm thick, for doors with one or more rebates including necessary fixing lugs, 100 mm size butt hinges, lock strike plates etc and applying a shop coat of red oxide primer including providing PCC (1:3:6) type C-0 using 12.5 mm graded crush stone aggregate for filling back of chowkhats complete all as specified for size of frame: -
105 mm x 60 mm
125 mm x 60 mm
Factory made steel windows with side hung shutter with glazing bars each shutter having 02 No. box type hinges & two nos. tower bolts of size not less than 150 mm size and peg stays, dovetailed or welded, including one shop coat of zink chromate primer complete.
Factory made steel windows with side hung shutter without glazing bars each shutter having 02 No. box type hinges & two nos. tower bolts of size not less than 150 mm size and peg stays, dovetailed or welded, including one shop coat of zink chromate primer complete.
Steel windows or ventilators, fixed type including one shop coat of zink chromate primer complete.
NOTES APPLICABLE TO SERIAL ITEM NO. 28 TO 30: Profile section used under these items shall be 'P' tube as shown in drawing No. CE/AF/STD-170/07, CE/AF/STD-171/07 and CE/AF/STD-172/07 as applicable.
Water Proofing Treatment to RCC sunken surfaces comprising of : -
Rendering 15 mm thick (Average thickness) rendering on sunken surfaes including flashings, finished even and fair in cement mortar (1:4), using water proofing compound as per recommended ratio, after brushing cement slurry @ 1.20 kg/Sq. m, complete all as specified.
LDPE sheet 150 micron laid over applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq. m & adjoining vertical surfaces including applying bitumenous primer @ 0.40 litre per square metre over clean RCC/plastered roof surfaces complete all as specified.
Water Proofing Treatment to RCC roofs comprising of : -
Taking down existing water proofing treatment (any no. of layers) from RCC roofs including cleaning the surface including flashings and junction of parapet etc. with wire brushing & water to the entire satisfaction of EIC, complete all as specified.
PCC (1:2:4) type B-1 using 20 mm graded stone aggregate, laid to slope as directed by Engineer in Charge over RCC roofs as padding, complete all as specified.
Rendering 15 mm thick (Average thickness) rendering on roof surface including flashings and junction of parapets etc., finished even and fair in cement mortar (1:4), using water proofing compound as per recommended ratio, after brushing cement slurry @ 1.20 kg/Sq. m, complete all as specified. NOTE: Supply only WPC will be measured & paid for separately under respective item of BoQ.
APP modified water proofing membrane with non-woven polyester reinforcement, superior multi poly meric weighing not less than 3.5 kg / Sq.m laid on primed roofs & flashing by forced application using Butane torch and sealing all joints on primed surface by applying hot blown industrial grade bitumen @ 85/25 @ 1.20 kg/Sq.m over a coat of bitumenous primer @ 0.40 litre per square metre over clean RCC/plastered roof surfaces & flashings complete, all as specified.
40 mm thick brick tiles are bedded over 15 mm thick cement mortar (1:4), and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement on APP membrane, complete all as specified.
40 mm thick brick tiles (Except Tiles) are bedded over 15 mm thick cement mortar (1:4), and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement on APP membrane, complete all as specified.
Making benching with PCC (1:2:4) type B-0 (using water proofing compound) along side walls adjoining to roofs, in CONCAVE SHAPE, complete all as specified. NOTE: WPC will be measured and paid for separately under respective item of BoQ.
NOTES APPLCABLE TO SERIAL ITEM 31 & 32: (a) Item for demolition of mud phuska, dismantling of brick tiles on RCC roofs and supply only WPC will be measured and paid for separately under respective item of BoQ. (b) For Guarantee of Water Proofing Treatment refer PS clause 11.5 of CA.
Supply only water proofing compound (WPC), ISI marked, complete all as specified.
uPVC pipes, 110 mm external dia pipe, type-A, ISI marked (IS:13592) single socketed in any length with rubber ring joints, fixed to wall with PVC brackets as rain water pipes, IN REPAIRS, complete all as specified
uPVC bends any radius, suitable for 110 mm external dia pipe, type-A uPVC pipes, complete all as specified.
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc., including brushing neat cement slurry @ 3 kg of cement per sq.m complete, all as specified.
25 mm thick, cement concrete type B-0, 1:2:4 using 12.5 mm graded stone aggregate, finished rough, as in sub floors or similar locations, complete all as specified.
75 mm thick, cement concrete type C-1, 1:3:6 using 20 mm graded stone aggregate, finished even & smooth without using extra cement, as in plinth protection, and joints shall be sealed with joint sealing comound grade 'A' complete all as specified.
Machine cut, pre-polished (Granite finish) Kota stone slab flooring 15-20 mm thick, for staircase step in single piece (of length not more than 1200 mm), bedded and jointed with grey cement slurry over & including 20 mm thick (average thickness) cement mortar (1:3) screed & joints pointed with grout of matching shade, complete all as specified.
Machine cut, pre-polished (Granite finish) Kota stone slab 15-20 mm thick, for staircase riser in single piece (of length not more than 1200 mm), bedded and jointed with grey cement slurry over & including 15 mm thick (average thickness) cement mortar (1:3) rendering & joints pointed with grout of matching shade, complete all as specified.
Granite jet black shade, 15-18 mm thick,as in step, jambs, cooking platform and like, machine cut, machine polished, bedded and jointed with grey cement slurry, over & including 10 mm thick (average thickness) cement mortar (1:4) renering, & joints pointed with grout of matching shade complete all as specified.
Rounding of / moulding to edges (half round) of stone of any description including rubbing and polishing (Granite finish), complete all as specified.
Glazed ceramic coloured tiles, 7mm thick (square/ rectangular) area of each tile exc. 0.15 Sq.m but n. exc. 0.20 Sq.m, on vertical surfaces as in skirting, dado etc. set and jointed in neat cement slurry over and including 10mm thick rendering in cement mortar (1:4) rendering and joints pointed with grout of matchnig shade of tile, complete all as specified.
Non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exc. 0.06 Sq.m but n. exc. 0.11 Sq.m, laid in floors etc, set and jointed in neat cement slurry over and including 15mm thick rendering in cement mortar (1:4) screed and joints pointed with grout of matchnig shade of tile, complete all as specified.
Non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exc. 0.11 Sq.m but n. exc. 0.18 Sq.m, laid in floors etc, set and jointed in neat cement slurry over and including 15mm thick rendering in cement mortar (1:4) screed and joints pointed with grout of matchnig shade of tile, complete all as specified.
Non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exc. 0.11 Sq.m but n. exc. 0.18 Sq.m, as in skirting, etc.set and jointed in neat cement slurry over and including 10mm thick rendering in cement mortar (1:4) rendering and joints pointed with grout of matchnig shade of tile, complete all as specified.
Non skid vitrified ceramic coloured tiles 9 to 10 mm thick (square/ rectangular) area of each tile exc. 0.18 Sq.m but n. exc. 0.36 Sq.m, laid in floors etc, set and jointed in neat cement slurry over and including 15mm thick rendering in cement mortar (1:4) screed and joints pointed with grout of matchnig shade of tile, complete all as specified.
Non skid vitrified ceramic coloured tiles 9 to 10 mm thick (square/ rectangular) area of each tile exc. 0.18 Sq.m but n. exc. 0.36 Sq.m, as in skirting, etc. set and jointed in neat cement slurry over and including 10mm thick rendering in cement mortar (1:4) rendering and joints pointed with grout of matchnig shade of tile, complete all as specified.
Cutting out natural vegitation plants grown up o wall or roof and making good the damaged portion to match with with the existing cement concrete complete.
Rendering 10 mm thick on fair faces of concrete surfaces, finished fair and even on ceiling surfaces in cement mortar (1:3), complete all as specified.
Rendering 15 mm thick on fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:6) complete all as specified.
Rendering 15 mm thick on fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:4), mixed with water proofing compound as per manufacturers instructions, complete all as specified.
Repairinging of damaged swollen RCC surfaces like projections chhajjas, facia, parapet etc including necessary scraping, cutting, chiseling, derusting and cleaning exposed reinforcement, washing apply cement slurry @ 3 kg/Sq.m and fiishing the surface with cement concrete (1:1.5:3) using 12.5 mm graded stone aggregate incl provision of welded mesh having weight not more than 3 kg/Sq.mm as reinforcement with and/or finished the repaired surface with cement and sand mortar (1:3) using WPC and work in patches area n.exc 5 Sq.m incl necessary formwork complete all as specified. NOTE:Quoted rate shall includes the cost of scaffolding/shuttering upto 15 metre height.
NOTE APPLICABLE FOR SERIAL ITEM 52 to 53: Supply only water proofing compound (WPC) will be easured & paid separately uder respective item of BoQ.
Applying one coat of white washing including preparation of old ceiling surfaces, complete all as specified.
Applying three coats of white washing including preparation on new plastered ceiling surfaces, complete all as specified.
Applying two coats of white washing including preparation on old wall surfaces, complete all as specified.
Applying one coat of interior acrylic distemper/oil bound distemper including prepration of old wall surfaces of any description complete all as specified.
Prepration of new plasterd wall surfaces of any description complete all as specified and applying the following: - (a) Applying wall care putty, in two coats & smoothening the surfaces as specified. (preparatory to paint as directed). (b) Two coats of interior acrylic distemper/oil bound distemper over and including a coat of primer.
Applying two coats of cement base paint including prepration of new wall surfaces of any description, complete all as specified.
NOTES APPLICABLE TO SERIAL ITEM NO. 57 TO 58.1: (i) Entire quantity of material for this work shall be procured by the contractor from manufacturer's Depot & deposit the same with Enginer-in-Charge and same shall be issued to contractor on daily basis as per consumption at site. (ii) The work shall be got executed through paint manufacturer/ authorised applicators of manufacturer's as specified in relevent PS clause.
Sheet glass 4mm thick ordinary quality and glazing with oil putty or wooden beads in squares n. exc. 0.5 Sq.m in each pane including hacking out old broken glass (any thickness, size, quality or description) from wooden/ metal frame including punching or drilling out old glazing pins/spring clips complete all as specified.
Sheet glass 4mm thick ordinary quality and glazing with oil putty or wooden beads in squares n. exc. 0.5 Sq.m in each pane complete all as specified.
Figured glass, 4 mm thick, pin head type and glazing with linseed oil pane putty & spring glazing clips, in squares exceeding 0.5 sq.m in each pane, complete all as specified.
Preparation of new wood and wood based surfaces of any description not other wise described over 10cm width or girth and applying two coats of synthetic enamel paint over & including a coat of pink primer complete all as specified.
Two coats of synthetic enamel paint over & including a coat of red oxide primer over new steel & iron surfaces of any description, not otherwise described, over 10 cm in width or girth, including preparation of surfaces complete all as specified.
Steel tubes ‘medium grade’, galvanized with all fittings and fixed to walls and ceilings or laid in floors including taking down existing steel tubing and connections,complete all as specified of size: -
15mm bore
20mm bore
500 litre capacity, white, three layered polyethylene water storage tanks (cylindrical vertical with closed top) including hoisted and fixed in position, making connections, IN-REPAIRS, complete all as specified including the following acessories: - (i) PTMT ball valves, high pressure, with epoxy coated aluminium rod & high density plastic ball complete screwed for iron pipe or brass ferrule and fixed, suitable for 20 mm bore GI pipe, IN REPAIRS, complete all as specified. (iii) Gun-metal stop valve (quarter turn type) with MS lever handle, suitable for GI tubes 20 mm bore, ISI marked, screwed both ends for iron pipe, IN REPAIRS, complete all as specified. (iv) Provn of 20 mm bore GI light grade tube from O/H tank to nearest mouth of RWP.
Angular stop valve/cock, cast copper alloy, chromium plated, with wall flange, quarter turn type, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, IN REPAIRS, complete. MAKE: PRAYAG Cat No. 6810 or equivalent make mentioned in Appndix 'B'.
Concealed stop valve/cock, cast copper alloy, chromium plated, with wall flange, quarter turn type, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, IN REPAIRS, complete. MAKE: PRAYAG Cat No. 6818 or equivalent make mentioned in Appndix 'B'.
Bib tap, cast copper alloy, chromium plated fancy type, long body with wall flange, quarter turn type, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, IN REPAIRS, complete. MAKE: PRAYAG Cat No. 6808 or equivalent make mentioned in Appndix 'B'.
Centre hole basin mixer, swan neck type, cast copper alloy, chromium plated, quarter turn type, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, IN REPAIRS, complete. MAKE:PRAYAG Cat No. 6850 or equivalent make mentioned in Appndix 'B'.
100 mm size overhead cross flow ABS shower with cast copper alloy chromium plated arm 300 mm long with flange and fixed in position, IN REPAIRS, complete. MAKE:PRAYAG Cat BOS-100 or equivalent make mentioned in Appndix 'B'.
Stainless steel towel rail 600 mm long, fixed to wall with SS screws and PVC rawl plugs, IN REPAIRS, complete. MAKE: PRAYAG Cat No.BA-10S or equivalent make mentioned in Appndix 'B'.
PVC connections 15 mm size of length 450 mm with PTMT nuts, IN REPAIRS complete all as specified.
PTMT shelf 450 mm long fixed with and including steel screws and plastic plugs IN REPARS, complete all as specified. MAKE: PRAYAG Cat No.191 or equivalent make mentioned in Appndix 'B'.
Stainless steel (304 grade) grating with frame, with or without hole 100-110 mm size, IN REPAIRS, complete all as specified.
Vitreous China wash down water closet pan (pedestal pattern of size 540x 365x390 mm), white ISI marked, including fixing acessories, IN REPAIRS, complete all as specified.
PVC water closet seat and white cover, ISI marked, with & including mild steel chromium plated hinging device & rag bolts, IN REPAIRS, complete all as specified. MAKE: PRAYAG Cat No. 515 or equivalent make mentioned in Appndix 'B'.
Health faucet CP brass body with wall hook and 1 metre SS tube complete. MAKE: PRAYAG Cat No. BEA-40S or equivalent make mentioned in Appndix 'B'.
Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm, ISI marked, white, with integral foot rests (excluding flushing cistern and flush pipe), IN REPAIRS, complete all as specified.
PVC flushing cistern 8-10 litre capacity, dual flush type, syphonic action type, white shade, with side handle, ISI marked with flush pipe and all fixing arrangements, IN REPAIRS, complete all as specified.
Vitreous China wash basin, white, flat back, size 550 x 400 mm ISI marked, complete all as specified. including fixing acessories like rag bolts etc. with PTMT waste coupling half or full threaded suitable for & including 32 mm size PVC discharge pipe, IN REPAIRS, complete.
Stainless steel sink, single bowl type, matt finish, made out of SS-304 sheet not less than 1 mm for kitchen with & including plug waste pipe, washers connecting union etc including necessary fixing acessories, overall size 510mmx430X203 mm with bowl size 430mm x 380mm x203mm IN REPLACEMENT, complete. MAKE: PRAYAG Cat P-1318D or equivalent make mentioned in Appendix 'B'.
Stainless Steel kitchen plate rack of sheet thickness not less than 0.61 mm overall size 786 x 610 x 254 mm, fixed on walls wth PVC plugs and SS screws, IN REPAIRS, complete. MAKE: PRAYAG Cat No. P-340 or equivalent make mentioned in Appndix 'B'.
Cast iron spun type soil waste and vent pipe in any length with or without ears with cement joints laid in trenches or under floors, IN REPAIRS, complete all as specified, of size: -
75 mm bore
100 mm bore
Cast iron spun type soil waste and vent pipe in any length with or without ears with cement joints fixed to walls, IN REPAIRS, complete all as specified, of size:
75 mm bore
100 mm bore
Cast iron bends (any radius), diminishing pieces or tapers (largrer bore measured) with oval acess door, ISI marked, complete all as specified,IN REPAIRS, suitable for spun pipes of size: -
75 mm bore
100 mm bore
Cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with oval acess door, ISI marked, complete all as specified, IN REPAIRS, for spun pipes of size: -
75 mm bore
100 mm bore
Cast iron cowl, suitable for 100 mm bore spun pipe, ISI marked, IN REPAIRS, complete all as specified.
100 mm cast iron sanitary connection socket to fit WC out-let, IN REPAIRS, complete all as specified.
Cast iron sanitary connections short connections, pipe of length upto 450 mm, IN REPAIRS, complete all as specified, suitable for spun pipes of size: -
75 mm bore
100 mm bore
Cast iron floor trap,ISI marked, including jointing to waste pipe and fixed in cement concrete type B-1 (1:2:4)complete all as specified, IN REPAIRS, suitable for spun pipes of size: -
75 mm bore
100 mm bore
uPVC pipes, type-B, ISI marked (IS:13592) single socketed in any length with rubber ring joints, fixed under floors / wall as SWR pipes, IN REPAIR, complete all as specified of size: -
75 mm external dia pipe
110 mm external dia pipe
uPVC/PVC bend any radius, complete all as specified. suitable for uPVC soil waste discharge pipes, IN REPAIR, of size: -
75 mm external dia pipe
110 mm external dia pipe
Concrete bed to drain pipes 150 mm bore including packing under, and haunching against the sides of pipes after they are laid and tested; in cement concrete 1:3:6 type C-2, complete all as specified.
Reinforced concrete pipes 150 mm bore, class NP-2, laid and jointed complete with collars, laid in trenches and jointed, ISI marked, complete all as specified.
DEMOLITION/DISMANTLING WORKS
Taking down cement plaster of any description on brick walls or concrete surfaces etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.50 Sq.m each and removing from site all as specified.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 Sq.m but not exceeding 4.00 Sq.m each and removing from site all as specified.
Taking down shutters of any description exceeding 1.00 sqm but not exceeding 2.00 sqm each and refixing in the same opening after easing adjusting and minor REPAIRS complete all as specified.
Dismantling floor, hearth or wall tiling including cement mortar bedding and removing rubbish off the premises complete all as specified.
Demolition of stone slabs of any description, laid, bedded and pointed in any mortar complete all as specified.
Demolition brickwork or stone / boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified.
Demolition of cement concrete (unreinforced) in ground floors and pavings not excceding 15cm thickness (above or below ground level) all as specified
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided all as specified.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided all as specified.
Demolition of mud phuska in roofs, any thickness including plaster and leeping plaster (whether full thickness removed or only part thereof) all as specified.
Dismantlig brick tiles in roof laid dry and pointed in cement mortar all as specified.
Demolition and breaking up drain pipes 150 bore (Salt glazed ware, AC or Reinforced concrete) set in cement mortar, including PCC bedding as required and haunching, complete all as specified
NOTE: Amount of credit for retrieved materials is mentioned in tender documents in pdf form which will be deducted while acceptance of tender offline.
M/S GURBACHAN SINGH
PRATHAM TRADERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .