Item-4 Installation of additional Package sub station and Repair and maintenance

Amount

P/Laying P.V.C. / XLPE insulated & P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor of IS:1554 P-I / IS :7098 P - I of Group 1 of approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size.

185.0 Sq.mm 4 core

70.0 Sq.mm 4 core

Charges for testing of transformer oil for its viscosity and dielectric strength including collection of sample from top and bottom of the existing transformer tank and submission of test report complete with all T & P , labour etc as required .

Charges for collection , Filtration and dehydration of existing transformer oil with the help of high vaccum filtration machine and cleaning of core-coil assembly by hot oil for removal of sludge / dust particles etc. as required.

Supply and filling of fresh transformer oil as per IS: 335 in existing transformer along with submission of oil test report for its physical and chemical properties.The oil shall be clear and free from any suspended matter or sediments complete as required complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR

Repairing of LT/HT bushings of Distribution Transformers includingreplacement of brass studs , porcelain insulators , nut bolts , oil seals , gaskets etc.complete as required complete in all respect. All as per pre approved byEngineer in charge. For additional technical parameters of products/ work refer annexure A

LT Bushing Set

HT Bushing Set

630 KVA to 1600 KVA

Replacement of silica gel Breather of Distribution Transformers of following capacities complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

Replacement of gasket of Distribution Transformers of following capacitiescomplete in all respect. All as per pre approved by Engineer in charge. ForFor additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .

630 kva KVA to 1600 KVA Set

Detecting of cable fault for 33KV and 11 KV cable with fault locate Machine

Providing & Fixing of IK07 IP-66 protected high power LED flood light system with Pressure diecast aluminium housing LM6/ ADC12 material , toughened glass diffuser with suitable lenses on LED to achieve various beam angles, 240 volt, 50Hz, of high power LED lamps . Integrated driver must be potted & has a unique BIS R number shall be high efficiency having efficiency more than 85 % and in compliance to BIS certified and T.C. certificate. The System level Luminaire efficacy >=120 lm/ wt with High Power LEDs is to be used . LED driver Input Voltage AC 120 to 270 V AC with High voltage Cutoff @>=300 V AC and Auto resetting Safety . Input Frequency 50Hz±3%, Power Factor >0.95 ,driver Efficiency >85% , THD(I) <10% , driver current <1000mA shown in LM79 report. driver should be Phase to phase protection of 440 V for 4 Hrs. Electrical Connector Must be provided, Surge Protection Min >=4KV internal and 10KV external, System life of 30000 Burning hours with 70% of Initial Lumens maintained, color Rendering Index >70 and CCT 5700K ±355K. Driver current <1000mA shown in LM79 report. Manufactures Word Mark/Name Engraved/Embossing/Screen printing on die cast housing to allow traceability/authenticity. Fixture shall be IS 10322 Complianced. OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR

LED Street Light fixture 30 Watt

LED Street Light fixture 70 Watt

LED Street Light fixture 120 watts

Replacement of following faulty items/ consumable items of DG Sets

Oil Filter of 75/80 KVA DG Sets

Diesel filter of 75/80 KVA DG Sets

Lubricant OIL

180 AH Lead acid battery

coolent

PROM Relay

DG Panel Relay

Fuel Injection Pump

Fuel Strainer

Stop solenoid

Canopy LOCK

Diesel

B-check servicing of 75/80/320 KVA DG set at Site i/c supply & replacing of mobile oil (Koel Care Super Genuine ) for B-check servicing as per manufacturer's recommendation (servicing is to be carried out through authorised dealer only).

Providing experienced and Highly skilled/skilled/ semi- skilled/Un Skilled labour for electric repair/ maintenanceoperation of Air conditioning/Air cooling/Fire fighting/Lift/DG set/CCTV/EPABX or any other electromechanical systems as per requirement (one shift of 8 Hrs per day for 26 Working Days in a month)

skilled Labour

Semi skilled Labour

Bidder Name

Amount

M/S Jindal Electricals(GSTN-08AEJPJ5458A1ZL)

M/S Pooja Electricals(GSTN-08AMJPM5477G1ZM)

M/S Jindal Electricals

M/S Pooja Electricals